Page 2 - Table of Contents
Table of Contents Introduction Safety Information Recommended Usage and Care Mounting Accessory Kit Installation Inputs Operation OSD Menus 3 3 4 5 6 6 7 8 10 Copyright © 15 August 2014 by Planar Systems, Inc. All rights reserved. Contents of this publication may not be reproduced in any form withou...
Page 4 - Recommended Usage
12) You must follow all National Electrical Code regulations. In addition, be aware of local codes and ordinances when installing your system. 13) Refer all servicing to qualified service personnel. Servicing is required when any of the displays have been damaged in any way. For example, if the AC p...
Page 5 - VESA Mounts, General Description; Package Contents; Package Contents
Cooling Requirements For optimal performance, active cooling by the installer should be planned for when the ambient temperature at the top of the wall is predicted to be above the specified ambient temperature for the panel. Cooling may be done behind the displays and depending on the wall configur...
Page 7 - Signal Source Inputs
Operating the PS7050/PS7050T OSD Keypad The OSD keypad is located on the bottom rear of the display. Label Connector Notes USB USB 2.0 USB playback and firmware updates Display Port Display Port HDMI 1 HDMI HDMI 2 HDMI Signal Source Inputs Source inputs are located on the bottom rear of the display....
Page 8 - Remote Control
The Hex codes are shown below: Remote Control Below is a picture of the remote control and a description of the functions supported. No. Remote Key Code [ Hex] No. Remote Key Code [ Hex] 1 POWER 00 FF 8A 75 26 □ 00 FF C7 38 2 PC 00 FF 8E 71 27 HDMI 00 FF 9E 61 3 VIDEO 00 FF 90 6F 28 1 00 FF 81 7E 4 ...
Page 9 - Using the Display in Portrait Mode; Using the Display in Flat Orientation
Using the Display in Portrait Mode When looking at the rear of the display in landscape orientation, rotate the display counter-clockwise for portrait orientation . This will allow for proper ventilation. The directional indicator is located on the bottom of the product rating label for reference. C...
Page 10 - Picture Menu
Selecting the Input Source Input sources must be selected manually. Below are the ways you can select the input source: 1) Press the Input button on the remote control to activate the input on-screen menu. Use the arrow buttons to select the desired input source and press OK. OSD Menu Functions Pres...
Page 11 - Sound Menu; OptionMenu
Sound Menu Item Selection Options Sound Setting Treble and bass: 0-64 Balance -50 to 50 OptionMenu Item Selection Options OSD Language English, French, German, Spanish, Chinese +18 other language options Restore Factory Default Yes/No 11 PS7050/PS7050T User Manual Auto Volume On/off Surround Sound O...
Page 12 - Playing Media Files; Time Menu
Playing Media Files Time Menu Item Selection Options Clock Date/Month/Year/Hour/Minute Off Time Off/Once/Every Day/Mon~Fri/Mon~Sat/Sat~Sun/Sunday/ Hour/Minute This display can play video, image, music, and text files from your USB device. Connect your USB device to the USB port on the display. Selec...
Page 13 - Media Menu Bar When Videos are Playing; Playing Videos
Media Menu Bar When Videos are Playing Press the OK button on the remote to enable each function. Item Function Play/Pause Press OK when “Play” is showing to play the video. Press OK when “Pause” is showing to pause the video. FB Rewind the video. Each press of the OK button increases the speed. FF ...
Page 14 - Media Menu Bar When Image Slideshows are Playing; Playing Image Files
Media Menu Bar When Image Slideshows are Playing Press the OK button on the remote to enable each function. Playing Image Files If you are in Auto Play mode (see page 10), the video will automatically play and the menu will not appear. To stop playback when Auto Play is set to “On”, press the Stop o...
Page 15 - Touch Screen Operation
RS232 Communication RS232 control is not necessary for operation, but is a convenient way to control displays from a computer at a distance. If your installation will not use RS232 control, skip this section. RS232 connections are made with standard straight-through cables. Connecting the RS232 Cabl...
Page 16 - Signal Compatibility; Specifications
Signal Compatibility Model PS7050 PS7050T Viewable Size 70” Diagonal Brightness ( typ) 400 cd/m 2 Contrast Ratio (typ) 4000:1 Display Resolution FHD 1080p (1920 x 1080) Response Time (typ) 8 ms Refresh Rate 60 Hz Pixel Pitch 0.807mm x 0.807mm Color Gamut 70% NTSC Viewing Angle (typ) 178 ⁰ External C...