Page 2 - Content
1 Content Operation Instructions...................................................................................................................................................1 Unpacking Instructions ...................................................................................................
Page 3 - Operation Instructions; Important Recycle Instructions:
1 Operation Instructions Thank you for purchasing the PX2230MW multi-touch LCD monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This TFT LCD Monitor has been tested and found compliant with the limits for a...
Page 5 - Front View of the Product
3 Front View of the Product ① ② ③ ④ ⑤⑥ ① OSD Turn On/ O ② Volume Adjust/ Scroll Down/ Adjust Decrease ③ Preset Mode/ Scroll UP/ Adjust Increase ④ Input select/ C Selection ⑤ Power On/ O ⑥ LED Indicator
Page 6 - Rear View of the Product
4 Rear View of the Product ⑦ ⑧ ⑨ ⑩ ⑪ ⑦ Power Input ⑧ Audio Input ⑨ DVI Input (DVI 24 pin) ⑩ VGA Input (D-Sub 15 pin) ⑪ USB – Type A to B
Page 7 - Quick Installation; both monitor and computer are powered OFF.
5 Quick Installation 1. Connect either VGA or DVI Video Source from the monitor to the computer. Make sure both monitor and computer are powered OFF. 2. 3. Power-ON computer and then POWER-ON the monitor 4. Set the timing mode on your computer. Recommended resolution and refresh rate is 1920 x 1080 ...
Page 8 - Basic Operation and Calibration/Reset Instructions; Using the OSD Menu; Recalls both Contrast and Brightness (when not in OSD menu); OSD Lock Out Function
6 Basic Operation and Calibration/Reset Instructions Before using the TFT Touchscreen LCD Monitor: Connect external equipment properly. Insert the power plug, and the power LED indicator will light orange. To turn the TFT Touchscreen LCD M : Press POWER button on the front. The power LED indicat...
Page 10 - Advanced Operation—OSD Menu
8 Advanced Operation—OSD Menu You can use the OSD menu to adjust various settings for your TFT Touchscreen LCD Monitor. Press the 1 button to display the OSD Menu, and use ▲▼ to select the desired OSD menu. Short Cuts Function from the button(s) Auto Image Adjust: To auto adjust Horizontal Position,...
Page 13 - Supporting Timing Modes
11 Supporting Timing Modes STANDARD RESOLUTION VGA 720 x 400 @ 70Hz VGA 640 x 480 @ 60Hz MAC 640 x 480 @ 67Hz VESA 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA 800 x 600 @ 75Hz MAC 832 x 624 @ 75Hz VESA 1024 x 768 @ 60Hz VESA 1024 x 76...
Page 14 - Technical Information
12 Technical Information LCD Panel 21.5” TFT Power Management On: 48 Watts (maximum) Standby Mode: < 1 Watt O : < 1 Watt Displayable Resolution Full HD 1920 x 1080 max. Vertical Frequency 60Hz max. Pixel Dimension 0.24825 x 0.24825 mm LCD Display Color 16.7M Tilt 5° (+0/-2) ~ 36° (+/-2) Active...
Page 15 - Wall-Mount Installation Instructions
13 Wall-Mount Installation Instructions Wall Mount Arm not included Turn the power OFF then disconnect the cables from the TFT Touchscreen LCD Monitor before performing the procedure below. 1. Lay the TFT Touchscreen LCD Monitor face down on a soft surface. NOTE 100mmx100mm VESA hole pattern (n=4), ...
Page 16 - Troubleshooting; No power; Power on but no screen image
14 Troubleshooting No power Make sure A/C power cord is securely connected to the power adapter and the power supply is connected to the TFT Touchscreen LCD Monitor. Plug another electrical device into the power outlet to verify that the outlet is supplying proper voltage. Make sure all signal...
Page 17 - Product Registration and Technical Support; Register Your Planar Products Today; Technical Support
15 Product Registration and Technical Support Register Your Planar Products Today Thank you choosing Planar. To assure you receive all the ben of your Planar product and services, register your Planar product today. Visit our website to register your product at http://www.planar.com/support/product_...