Planar PT1945S - Manuals

Package Overview Display Power Cord VGA Signal Cable RS-232 Cable (PT1945R/PT1945S only) USB Cable ( A to B) Audio-in Cable Landing Strip User’s Guide xxxxxxxxx / xxxxxxxxx xxxxxxxxx USER’S GUIDE www.planartouch.com 4 Cable Cover Screw

Installation Product Overview • Front View • PT1945R/PT1945S Bottom View (Without Stand) • PT1945P Bottom View (Without Stand) 5 RS-232 VGA AC IN USB POWER SWITCH AUDIO PT1945R/PT1945S PT1945P AC IN USB POWER SWITCH VGA AUDIO

6 Start Your Installation Please follow these instructions so that you can hookup the cables to associated connector.1. Lay the display fl at on an even surface. 2. Move the stand into position as seen in the step 2 diagram.3. Remove the cable cover as seen in the step 3 diagram.4. Connect the cable...

Kensington Security Slot The monitor can be secured to your desk or any other fi xed object with Kensington lock security products. The Kensington lock is not included. 9

VESA Mount Your Monitor This monitor conforms to the VESA Flat Panel Mounting Physical Mounting Interface standard which de fi nes a physical mounting interface for fl at panel monitors, and corresponding with the standards of fl at panel monitor mounting devices, such as wall and table arms. The VE...

Remove the Deskstand 11 Remove 4 screws and then remove hinge.

User Controls Side Panel Controls OSD Key Menu off status Menu on status Menu appear Menu disappear/ return to main item Brightness Main item select up/ Adjust up Mute Main item select down/ Adjust down Enter/Select sub-item function Power On/Off 12 Icon key Name Menu Up Down Enter Power

How to Use the OSD Menus Icon Key Name Menu Up Down Enter Power 1. Press the “MENU” button to pop up the “on-screen menu” and press “Up” or “Down” button to select among the six functions in the main menu.2. Choose the adjustment items by pressing the “Enter ” button.3. Adjust the value of the adjus...

14 On-Screen Display Menus Main OSD Menu: ITEM CONTENT Contrast The monitor luminance level control. Brightness The monitor backlight level control. Auto Adjust Fine-tune the image to full screen automatically. Left/Right Moving screen image horizontal position to left or right. Up/Down Moving scree...

Appendix Troubleshooting If you are experiencing trouble with the display, refer to the following. If the problem persists,please contact your local dealer or our service center. Problem: No image appears on screen. ► Check that all the I/O and power connectors are correctly and well connected descr...

16 Warning Signal If you see warning messages on your screen, this means that the display cannot receive a clean signal from the computer graphics card.Below are the three kinds of Warning Signal. Please check the cable connections or contact your local dealer or Planar for more information. No Sign...

Product Dimensions PT1945R/PT1945S 17 431.8 mm 390.9 mm 358.0 mm 249.6 mm 219.0 mm 212.0 mm 67.0 mm ► Side View ► Top View ► Front View

Compatibility Modes Mode Resolution H-Frequency (KHz) V-Frequency (Hz) IBM VGA 720 x 400 31.47 70 IBM VGA 640 x 480 31.47 60 VESA VGA 640 x 480 37.86 72 VESA VGA 640 x 480 37.50 75 VESA SVGA 800 x 600 35.16 56 VESA SVGA 800 x 600 37.88 60 VESA SVGA 800 x 600 48.08 72 VESA SVGA 800 x 600 46.88 75 VES...

Touch Screen Driver Installation The PT1945R/PT1945S is available with both RS232 and USB connections. The touch driver is located at www.planar.com/support for these operating systems: Windows ® 7/8, VISTA, XP, 2000, ME, 98, NT 4.0, CE, XP Embedded, Linux 2.6.x (32 bit & 64 bit), Apple ® Mac OS...

PT1945P Optional Calibration Tool Install: Calibrating the touch screen in Windows 7/8:1. Tap the Start button, Control Panel and then Hardware and Sound.2. Under Tablet PC Settings, tap Calibrate the screen for pen or touch input.3. On the Display tab, under Display options, tap Calibrate and then ...

PT1945R/PT1945S Install Instructions: If you are using a PC running Windows® 7/8, VISTA, XP, 2000, ME, 98, NT4.0, follow the instructions below: 1. Power on the PC.2. Be sure the USB or the RS-232 Serial cable is connected from the PC to the display.3. Visit www.planar.com/support.4. Follow the step...

PT1945P Driver Install Instructions: If you are using a PC running, Windows® 7/8, VISTA, XP, 2000, follow the instructions below: 1. Power on the PC.2. Make sure that the USB cable is connected to the computer. 3. Visit www.planar.com/support.4. Follow the step-by-step instructions as shown on the p...

Technical Support Cables and Accessories To fi nd cables and accessories for your Planar monitor, touch screen or other Planar products visit our online store at www. PlanarOnline.com . Technical Support Visit Planar at http://www.planar.com/support for operations manuals, touch screen drivers, warr...