Planar PR9020 - Manuals - manualsarea.com

Page 2 - 4/7 Technical Support

Important Recycle Instruction Lamp(s) inside this product contain mercury. This product may contain other electronic waste that can be hazardous if not disposed of properly. Recycle or dispose in accordance with local, state, or federal Laws. For more information, contact the Electronic Industries A...

Page 3 - Thank you for purchasing this projector.; Trademark acknowledgment; or registered trademarks of HDMI Licensing LLC.; About this manual; WARNING

1 Thank you for purchasing this projector. ►Before using this product, please read the "User's Manual" and related manuals to ensure the proper use of this product. After reading them, store them in a safe place for future reference. WARNING • The information in this manual is subject to cha...

Page 4 - Contents; Changing the frequency of remote control signal . 14; creen; Phenomena that may be easy

2 Contents Contents About this manual . . . . . . . . . . . 1 Contents . . . . . . . . . . . . . . . . . . 2 Projector features . . . . . . . . . . . 3 Preparations . . . . . . . . . . . . . . . 3 Contents of package . . . . . . . . . . . . . 3 Fastening the lens cover . . . . . . . . . . 3 Part nam...

Page 5 - caution for the lens.; Projector features; a large projected image from even a short distance.; Preparations; dealer if anything is missing.; Fastening the lens cover; Fix the strap to the strap hole of the lens; Strap hole

3 Projector features / Preparations • Keep the original packing materials for future reshipment. Be sure to use the original packing materials when moving the projector. Use special caution for the lens. NOTE Projector features This projector is used to project various picture signals onto a screen....

Page 6 - Part names; The lamp unit is inside.; : Do not touch around the lamp cover and the exhaust

4 Part names Part names Projector (1) Speakers (x 4) (  37 ) (2) Focus ring (  19 ) (3) Zoom ring (  19 ) (4) Lamp cover (  60 ) The lamp unit is inside. (5) Lens shift cover (  19 ) (6) Horizontal lens shift dial (  19 ) (7) Vertical lens shift dial (  19 ) (8) Front cover (9) Lens (  65 ) ...

Page 7 - Control panel; It consists of four cursor buttons.; Rear panel; ►Do not use the security bar and the security slot to prevent the

5 Part names Control panel (1) STANDBY/ON button (  16 ) (2) MENU button (  23 ) It consists of four cursor buttons. (3) INPUT button (  17 ) (4) POWER indicator (  16 ) (5) TEMP indicator (  67 ) (6) LAMP indicator (  67 ) Rear panel (1) Shutdown switch (  69 ) (2) Security slot (  9 ) (3) ...

Page 8 - Remote control; Cursor button ▲ : to slide toward the side marked ▲.; ►Do not look into the beam outlet and; Back of

6 Part names Remote control (1) Laser pointer (  13 ) It is a beam outlet. (2) LASER INDICATOR (  13 ) (3) LASER button (  13 ) (4) STANDBY/ON button (  16 ) (5) VOLUME button (  17 ) (6) MUTE button (  17 ) (7) VIDEO button (  18 ) (8) RGB button (  17 ) (9) SEARCH button (  18 ) (10) AUTO...

Page 9 - Setting up; as a wobbly or inclined stand.

7 Setting up Setting up Install the projector according to the environment and manner the projector will be used in. ►Place the projector in a stable horizontal position. If the projector falls or is knocked over it could cause injury and/or damage to the projector. Using a damaged projector could t...

Page 10 - Arrangement; On a horizontal; • Keep a space of 30 cm or more

8 Setting up Arrangement Refer to the illustrations and tables below to determine screen size and projection distance. The values shown in the table are calculated for a full size screen: 1024×768 (a) Screen size (diagonal) (b) Projection distance (±10%) (c) Screen height (±10%), when the vertical l...

Page 11 - Adjusting the projector's elevator; CAUTION; Using the security bar and slot; To finely adjust, twist

9 Setting up Adjusting the projector's elevator When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally. Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the fron...

Page 12 - Connecting your devices; prepare the cables required to connect.; Monitor

10 Setting up Connecting your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect the...

Page 13 - network that might have the excessive voltage.; NOTE; no video or no audio.

11 Setting up Connecting your devices (continued) • Be sure to read the manuals for devices before connecting them to the projector, and make sure that all the devices are suitable to be connected with this product. Before connecting to a PC, check the signal level, the signal timing, and the resolu...

Page 14 - Connecting power supply; Firmly plug the power cord's plug into the outlet.; AC inlet

12 Setting up Connecting power supply 1. Connect the connector of the power cord to the AC inlet of the projector. 2. Firmly plug the power cord's plug into the outlet. ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical s...

Page 15 - ►The laser pointer of the remote control is used in place of; Putting batteries; ►Always handle the batteries with care and use them only as; LASER INDICATOR

13 Remote control Remote control Laser pointer This remote control has a laser pointer in place of a finger or rod. The laser beam works and the LASER INDICATOR lights while the LASER button is pressed. ►The laser pointer of the remote control is used in place of a finger or rod. Never look directly...

Page 16 - About the remote control signal; The front and top sensors:; Changing the frequency of remote control signal; Back of the

14 Approx. 3 m 30º 30º 30º 30º Approx. 3 m 20º 20º Approx. 3 m Remote control About the remote control signal The remote control works with the projector’s remote sensors. This projector has three remote sensors on the front, on the top, and on the back. The sensors can be respectively turned active...

Page 17 - Using as a wired remote control; Using as a simple PC mouse & keyboard; to a PC

15 Remote control Using as a wired remote control The accessory remote control works as a wired remote control, when the wired control port at the bottom of the remote control connects with the REMOTE CONTROL port on the back of the projector via an audio cable with 3.5 diameter stereo mini plugs. W...

Page 18 - Turning on the power; Turning off the power; POWER indicator

16 1. Make sure that the power cord is firmly and correctly connected to the projector and the outlet. Power on/off Turning on the power 2. Remove the lens cover, and set the power switch to the ON position (marked “ I “). The power indicator will light up in steady orange (  67 ). Then wait severa...

Page 19 - Operating; Temporarily muting the sound

17 (*) RGB 1  RGB 2  HDMI VIDEO  S-VIDEO  COMPONENT (Y, C B /P B , C R /P R ) Operating Operating 1. Press the VOLUME button on the remote control. A dialog will appear on the screen to aid you in adjusting the volume. Adjusting the volume BLANK LASER ASPECT ESC MENU RESET POSITION AUTO MAGNIFY ...

Page 20 - Selecting an aspect ratio; Searching an input signal; For an RGB signal

18 Operating 1. Press the VIDEO button on the remote control to select an input for video signal. Each time you press the button, the projector switches its video input port as below. Selecting an input signal (continued) ● If the VIDEO button is pushed (when switching from RGB to VIDEO signals) whe...

Page 21 - Adjusting the zoom and focus; Zoom ring; Adjusting the lens shift

19 Operating • When the vertical lens shift is adjusted, it is recommended to shift the picture upward. NOTE 1. Use the zoom ring to adjust the screen size. Adjusting the zoom and focus 2. Use the focus ring to focus the picture. BLANK LASER ASPECT ESC MENU RESET POSITION AUTO MAGNIFY MY BUTTON VOLU...

Page 22 - Adjusting the position; Correcting the keystone distortions

20 Operating 1. Press the POSITION button on the remote control. The “POSITION” indication will appear on the screen. Adjusting the position 2. Use the ▲/▼/◄/► cursor buttons to adjust the picture position. When you want to reset the operation, press the RESET button on the remote control during the...

Page 23 - Using the magnify feature

21 Operating • The zoom level can be finely adjusted. Closely watch the screen to find the level you want. NOTE BLANK LASER ASPECT ESC MENU RESET POSITION AUTO MAGNIFY MY BUTTON VOLUME ON 1 MUTE OFF 2 FREEZE KEYSTONE SEARCH PUSH ENTER PAGE UP PAGE DOWN STANDBY/ON VIDEO RGB LASER INDICATOR BLANK LASE...

Page 24 - Press the BLANK button on the remote control.; Temporarily blanking the screen; MAGNIFY or FREEZE button, also except MY BUTTON1/2 if AUTO KEYSTONE

22 Operating BLANK LASER ASPECT ESC MENU RESET POSITION AUTO MAGNIFY MY BUTTON VOLUME ON 1 MUTE OFF 2 FREEZE KEYSTONE SEARCH PUSH ENTER PAGE UP PAGE DOWN STANDBY/ON VIDEO RGB LASER INDICATOR 1. Press the BLANK button on the remote control. The blank screen will be displayed instead of the screen of ...

Page 25 - Using the menu function; In the EASY MENU; RESET button

23 Operating 1. Press the MENU button on the remote control or one of the cursor buttons on the projector. The Advanced MENU, or EASY MENU that has priority just after powered on, will appear. If you want to move the menu position, use the cursor buttons after pressing the POSITION button. While the...

Page 26 - EASY MENU; From the EASY MENU, items shown in the table below

24 EASY MENU EASY MENU From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control. Then perform it according to the following table. Item Description ASPECT Using the ◄/► buttons switches the mode for aspect rat...

Page 28 - PICTURE Menu; From the PICTURE menu, items shown in the table; Item

26 PICTURE Menu PICTURE Menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or the ENTER button on the remote control to execute ...

Page 29 - To adjust CUSTOM

27 PICTURE Menu PICTURE Menu (continued) Item Description COLOR TEMP Using the ▲/▼ buttons switches the color temperature mode. To adjust CUSTOM Selecting a mode whose name includes CUSTOM and then pressing the ► button or the ENTER button displays a dialog to aid you in adjusting the OFFSET and GAI...

Page 31 - IMAGE Menu; From the IMAGE menu, items shown in the table below; above

29 IMAGE Menu IMAGE Menu From the IMAGE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. ...

Page 33 - INPUT Menu; From the INPUT menu, items shown in the table below

31 INPUT Menu INPUT Menu From the INPUT menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. ...

Page 35 - ▲/▼ buttons to select one of; Set the RGB input signal type for the RGB port.

33 INPUT Menu Item Description FRAME LOCK Set the frame lock function on/off for each port. (1) Use the ▲/▼ buttons to select one of following ports. RGB1 ó RGB2 ó HDMI QUIT (2) Use the ◄/► buttons to turns the frame lock function on/off . TURN ON ó TURN OFF • This item can be performed only on a si...

Page 36 - The resolution for the RGB1 and RGB2 input signals can be set on

34 INPUT Menu INPUT Menu (continued) Item Description RESOLUTION The resolution for the RGB1 and RGB2 input signals can be set on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed. (2) In the RESOLUTION men...

Page 37 - SETUP Menu; From the SETUP menu, items shown in the table below

35 SETUP Menu SETUP Menu From the SETUP menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or the ENTER button on the remote control to execute the it...

Page 39 - AUDIO Menu; From the AUDIO menu, items shown in the table below

37 AUDIO Menu AUDIO Menu From the AUDIO menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. ...

Page 40 - SCREEN Menu; From the SCREEN menu, items shown in the table below; MENU POSITION; Using the ▲/▼ buttons switches the mode for the blank screen.

38 SCREEN Menu SCREEN Menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the ite...

Page 41 - Using the ▲/▼ buttons switches the mode for the start-up screen.

39 SCREEN Menu SCREEN Menu (continued) Item Description START UP Using the ▲/▼ buttons switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF Feature MyScreen Screen can be registered by ...

Page 42 - below; MyScreen Lock

40 SCREEN Menu Item Description MyScreen This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen. Display the image you want to capture before executing the following procedure. 1. Selecting this item displays a dialog titled “My...

Page 44 - OPTION Menu; From the OPTION menu, items shown in the table below

42 OPTION Menu OPTION Menu From the OPTION menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the ite...

Page 49 - This projector is equipped with security functions.; Using Security Features; Inputting the PASSWORD; Changing the PASSWORD

47 OPTION Menu Item Description SECURITY This projector is equipped with security functions. User registration is required before using the security functions. Please contact your local dealer. 1. Using Security Features 1.1 Inputting the PASSWORD 1.1-1 Use the ▲/▼ buttons on the OPTION menu to sele...

Page 50 - Using the MyScreen PASSWORD Function

48 OPTION Menu Item Description SECURITY (continued) 1.3 If you have forgotten your PASSWORD 1.3-1 Follow the procedure in 1.1-1 to display the ENTER PASSWORD BOX. 1.3-2 While the ENTER PASSWORD BOX is displayed, press and hold the RESET button on the remote control for about 3 seconds or press and ...

Page 51 - Using the PIN LOCK Function

49 OPTION Menu Item Description SECURITY (continued) 2.2-4 Move the cursor to the right side of the PASSWORD AGAIN BOX and press the ► button to display the PASSWORD for about 20 seconds, please make note of the PASSWORD during this time. Pressing the ENTER button on the remote control or INPUT butt...

Page 53 - Using the Transition Detector Function; Function; PASSWORD

51 OPTION Menu Item Description SECURITY (continued) 4. Using the Transition Detector Function While the Transition Detector function is ON, when power switch is started to supply to the projector, it might react as below. • Transition Detector alarm shown below might appear on screen, if the projec...

Page 54 - Using the MY TEXT PASSWORD function

52 OPTION Menu Item Description SECURITY (continued) 4.3 Setting the Transition Detector off 4.3-1 Follow the procedure in 4.1-1 to display the Transition Detector on/off menu. 4.3-2 Select TURN OFF to display the ENTER PASSWORD BOX (large). Enter the registered PASSWORD and the screen will return t...

Page 55 - TURN ON; Turning on the MY TEXT PASSWORD

53 Item Description SECURITY (continued) 5.2 Displaying the MY TEXT (1) Use the ▲/▼ buttons on the SECURITY menu to select the MY TEXT DISPLAY menu and press the ► button to display the MY TEXT DISPLAY on/off menu. (2) Use the ▲/▼ buttons on the MY TEXT DISPLAY on/off menu to select on or off. TURN ...

Page 57 - NETWORK Menu; Network Settings of; Use the ▲/▼ buttons to select an item, and; Configuration; little time to obtain IP address from DHCP server.

55 Remember that incorrect network settings on this projector may cause trouble on the network. Be sure to consult with your network administrator before connecting to an existing access point on your network. Select “NETWORK” from the main menu to access the following functions. Select an item usin...

Page 60 - To erase the image displayed and its source file in the projector.

58 NETWORK Menu NETWORK Menu (continued) Item Description e-SHOT Selecting this item displays the e-SHOT menu. The application software “PJTransfer” is required to store image(s) into the projector. Use the ▲/▼ buttons to select an item which is a still image by the e-SHOT (  e-SHOT (Still Image Tr...

Page 62 - Lamp; In case of replacement by yourself,; Replacing the lamp; The handles; The lamp cover

60 Maintenance Maintenance A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early...

Page 63 - Lamp warning; HIGH VOLTAGE; About disposal of a lamp:

61 Maintenance Lamp warning Lamp (continued) HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetim...

Page 64 - Air filter; Use a vacuum cleaner on and around the; surface of

62 Maintenance Please check and clean the air filter periodically. If the air filter becomes clogged by dust or the like, internal temperatures rise, which could cause a fire, a burn or malfunction to the projector. When the indicators or a message prompts you to clean the air filter, comply with it...

Page 65 - • Please replace the air filter when it is damaged or too soiled.

63 Maintenance • Please replace the air filter when it is damaged or too soiled. • When you replace the projection lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector. • Please reset the filter time only when you have cle...

Page 66 - Internal clock battery; Use of another battery may present a risk of fire or explosion.

64 Maintenance Consumption of the battery makes the clock not to work correctly. When the clock is wrong or it has stopped, please replace the battery according to the following procedures. Internal clock battery 1. Turn the projector off, and unplug the power cord. Allow the projector to cool suffi...

Page 67 - Other care; inspected by your dealer about once every year.; Inside of the projector

65 Maintenance Other care In order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once every year. 1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently. 2. After making sure that the projector is cool adeq...

Page 68 - Troubleshooting; When the unit's power is on, messages such as those shown below may be; Message; There is no input signal.; of the signal source.; The horizontal or vertical frequency of the input signal; following items, please turn the power ON again.; A note of precaution when cleaning the air filter.; Please immediately turn the power off, and clean or change

66 Troubleshooting Troubleshooting Related messages When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please follow the instructions described below. If the same message is displayed after the remedy, or if a message o...

Page 69 - Regarding the indicator lamps; Green; Orange; Red; Red; Red; The lamp cover has not been properly fixed.

67 Troubleshooting Regarding the indicator lamps Lighting and flashing of the POWER indicator, the LAMP indicator, and the TEMP indicator have the meanings as described in the table below. Please follow the instructions within the table. If the same indication is displayed after the remedy, or if an...

Page 70 - Regarding the indicator lamps (continued); The cooling fan is not operating.; It is time to clean the air filter.; There is a possibility that the interior portion; At least 1 “Power ON” schedule is saved to the

68 Troubleshooting Regarding the indicator lamps (continued) • When the interior portion has become overheated, for safety purposes, the power source is automatically turned off, and the indicator lamps may also be turned off. In such a case, press the “  ” (OFF) side of the power switch, and wait ...

Page 71 - Phenomena that may be easy to be mistaken for machine defects; ►Never use the projector if abnormal operations such as smoke,; Phenomenon; Please turn the power off, and allow the projector to cool; of these has not been properly fixed.; Please turn the power off, and allow the projector to cool down at; Before requesting repair, please check in accordance with the

69 Troubleshooting Phenomena that may be easy to be mistaken for machine defects ►Never use the projector if abnormal operations such as smoke, strange odor, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. should occur. In such cases, immediately...

Page 72 - The volume is adjusted to an extremely low level.

70 Troubleshooting Phenomena that may be easily mistaken for machine defects (continued) (Continued on next page) Phenomenon Cases not involving a machine defect Reference page Sound does not come out. The signal cables are not correctly connected. Correctly connect the audio cables. 10 The MUTE fun...

Page 73 - • Although bright spots or dark spots may appear on the screen, this; Perform picture adjustments by changing the COLOR; The exhaust ventilation holes at front is blocked by; Remove any objects from front side of the projector.

71 Troubleshooting • Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and it does not constitute or imply a machine defect. NOTE Phenomenon Cases not involving a machine defect Reference page Video screen display freezes. The F...

Page 74 - Warranty and after-service; • These specifications are subject to change without notice.; Liquid crystal projector

72 Warranty and after-service / Specifications Warranty and after-service If a problem occurs with the equipment, first refer to the “Troubleshooting” and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service company. They will tell you what wa...

Page 76 - Corporate Headquarters; Planar Customer Support

Planar Systems, Inc . Corporate Headquarters 1195 NW Compton Drive Beaverton, OR 97006-1992 Planar Customer Support Telephone: US: 1-866-PLANAR1 (866) 752-6271 Outside US: (503) 748-5799 E-mail: [email protected] Online Technical Library: http://www.planar.com/support 24/7 Technical Support ©...