Planar PLL2010W - Manuals

Planar PLL2010W – Manual in PDF format online.

Manuals:

Manual

Manual Planar PLL2010W

Summary

Page 2 - Content

Content Operation Instructions ................................................................................................................................................... 1 Unpacking Instructions ...................................................................................................

Page 3 - Operation Instructions; Reorient or relocate the receiving antenna.

1 Operation Instructions Thank you for purchasing the PLL2010W LED LCD monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This LED LCD Monitor has been tested and found compliant with the limits for a Class B...

Page 4 - Avertissement de la FCC:; doivent être utilisé pour être conforme aux limites d’émission.

2 COMMUNIQUE D’AVERTISSEMENT DE LA FCC CONCERNANT LES INTERFERENCE DE FREQUENCE RADIO: (SEULEMENT POUR MODELES CERTIFIE PAR LA FCC) Ce moniteur a été testé et à été trouvé conforme aux limites pour un appareil numérique de Classe B, suivant la partie 15 des règlements de la FCC. Ces limites ont été ...

Page 6 - Consignes de sécurité

4 Consignes de sécurité Respectez tous les avertissements, les précautions et conseils d’entretien recommandés dans ce manuel de l’utilisateur pour maximiser la durée de vie de votre appareil. A faire :  Éteindre le produit avant de le nettoyer.  La surface de l'écran tactile peut être nettoyée av...

Page 7 - Package Overview; LED LCD Monitor

5 Package Overview LED LCD Monitor Base Power Cord VGA Signal Cable User’s Guide

Page 8 - First Setup; Install the stand base; Stand the LED LCD Monitor up.; Disconnecting the stand base; hooks down as directed below.

6 First Setup Install the stand base 1. Lay the LED LCD Monitor flat on a table with the LED screen face down. To prevent the monitor from being scratched, put a piece of soft cloth on the table on which the screen will be set. 2. Unpack the base, one hand hold the monitor, the other hand attach the...

Page 9 - Front View of the Product; Confirm Select /Input select/Auto adjust

7 Front View of the Product ① ② ③ ④⑤⑥ ① OSD Turn On/ Off ② Contrast/Brightness /Scroll Down/Adjust Decrease ③ Picture Mode/Scroll Up/ Adjust Increase ④ Confirm Select /Input select/Auto adjust ⑤ LED Indicator ⑥ Power On/ Off * Hot keys Instructions please see “Using the OSD Menu” on page 8.

Page 10 - Rear View of the Product

8 Rear View of the Product ① ② ③ ① Power Input (+12V DC In) ② DVI Input (DVI 24 pin) ③ VGA Input (D-Sub 15 pin)

Page 11 - Quick Installation

9 Quick Installation 1. Connect either VGA or DVI Source from the monitor to the computer. Make sure both monitor and computer are powered OFF. 2. Connect the power cord to a properly grounded AC outlet, then to the monitor. 3. Power-ON computer and then POWER-ON the monitor. 4. Set the timing mode ...

Page 12 - Basic Operation and Calibration/Reset Instructions; Using the OSD Menu

10 Basic Operation and Calibration/Reset Instructions Before using the LED LCD Monitor:  Connect external equipment properly.  Insert the power plug, and the power LED indicator will light orange. Power On/Off To turn the LED LCD Monitor on/off: Press button on the front. The power LED indicator l...

Page 14 - Advanced Operation—OSD Menu

12 Advanced Operation—OSD Menu You can use the OSD menu to adjust various settings for your LED LCD Monitor. Press the 1 button to display the OSD Menu, and use ▲ or ▼ to select the desired OSD menu. Short Cuts Function from the button(s) AUTO IMAGE ADJUST: To auto adjust Horizontal Position, Vertic...

Page 16 - HORIZONTAL POSITION:

14 OSD POSITION: Press ▲ or ▼ button to select between horizontal and vertical OSD Position adjustment. HORIZONTAL POSITION: To horizontally adjust the OSD position. ▲ : move OSD to the right, ▼ : move OSD to the left. VERTICAL POSITION: To vertically adjust the OSD position. ▲ : move OSD up, ▼ : mo...

Page 17 - Supporting Timing Modes

15 Supporting Timing Modes STANDARD RESOLUTION VGA 720 x 400 @ 70Hz VGA 640 x 480 @ 60Hz MAC 640 x 480 @ 67Hz VESA 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA 800 x 600 @ 75Hz MAC 832 x 624 @ 75Hz VESA 1024 x 768 @ 60Hz VESA 1024 x 76...

Page 18 - Technical Information

16 Technical Information Panel 19.5” TFT (with LED backlight) Power Management On: 1 6 Watts (typical), 18 Watts (maximum) Standby Mode: < 0.5 Watt Off: < 0.5 Watt Displayable Resolution WXGA++ 1600 x 900 max. Vertical Frequency 60Hz max. Pixel Dimension 0.2715 x 0.27 15mm Display Color 16.7M ...

Page 19 - Wall-Mount Installation Instructions; Preparing To Install The Optional Wall Mount Arm (not included); Lay the LED LCD Monitor face down on a soft surface.; Attaching The Optional Wall Mount Arm (not supplied); Place the wall mounting arm onto the back of the LED LCD

17 Wall-Mount Installation Instructions Preparing To Install The Optional Wall Mount Arm (not included) This LED LCD Monitor can be attached to a wall mounting arm you can purchase separately. Turn the power OFF then disconnect the cables from the LED LCD Monitor before performing the procedure belo...

Page 20 - Troubleshooting; No power; Power on but no screen image; Connect the LED LCD Monitor to another computer.

18 Troubleshooting No power  Make sure A/C power cord is securely connected to the power adapter and the power supply is firmly connected to the LED LCD Monitor.  Plug another electrical device into the power outlet to verify that the outlet is supplying proper voltage.  Make sure all signal cabl...

Page 21 - Cables and Accessories; Planar Support

19 Planar Support Cables and Accessories To find cables and accessories for your Planar monitor, touch screen or other Planar products visit our online store at www.PlanarOnline.com . Technical Support Visit Planar at http://www.planar.com/support for operations manuals, touchscreen drivers, warrant...