Planar PLL1900W - Manuals - manualsarea.com

Page 2 - Content

Content Operation Instructions................................................................................................................................................... 1 Safety Precautions ........................................................................................................

Page 3 - Operation Instructions

1 Operation Instructions Thank you for purchasing this edge-lit LED LCD monitor, a high-resolution multi-scan color LED LCD monitor.Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This LED LCD monitor has been test...

Page 4 - Safety Precautions

2 Safety Precautions This LED LCD monitor is manufactured and tested on a ground principle that a user’s safety comes first. However, improper use or installation may result danger to the LED LCD monitor as well as to the user. Carefully go over the following WARNINGS before installation and keep th...

Page 5 - First Setup; Installing the Stand Base

3 First Setup Congratulations on your purchase of this high performance edge lit LED LCD monitor. This LED LCD monitor comes with the following accessories :  LED LCD monitor  Power Cable  User’s Guide  VGA Cable Installing the Stand Base 1. Place the monitor face down on a soft cloth or cushion...

Page 6 - Front View of the Product

4 Front View of the Product  OSD Menu On/Off  Contrast/Brightness /Scroll Down/Adjust Decrease  Preset Mode/Scroll Up/ Adjust Increase  Confirm Select/ Auto adjust  Power ON/OFF  LED Indicator      

Page 7 - Rear View of the Product

5 Rear View of the Product  Power input (AC input)  VGA input (D-Sub 15 pin)  

Page 8 - Quick Installation

6 Quick Installation 1. Connect the VGA video cable from the monitor to the computer. Make sure both monitor and computer are powered OFF. 2. Connect the power cord to a properly grounded AC outlet, then to the monitor. 3. Power-ON computer and then POWER-ON the monitor. Set the timing mode on your ...

Page 9 - Basic Operation; POWER; Using the OSD Menu

7 Basic Operation Before using the LED LCD monitor: Connect external equipments properly. Insert the power plug, and the power LED indicator will light orange. Power On/Off To turn the LED LCD monitor on/off: Press POWER button on the front of LED LCD monitor. The power LED indicator lights green wh...

Page 11 - Advanced Operation—OSD Menu

9 Advanced Operation—OSD Menu You can use the OSD menu to adjust various settings for your LED LCD monitor. Press the 1 button to display the OSD Menu, and use ▲▼ to select the desired OSD menu. Short Cuts Function from the button(s) Auto Image Adjust: To auto adjust Horizontal Position, Vertical Po...

Page 14 - Supporting Timing Modes

12 Supporting Timing Modes STANDARD RESOLUTION VGA 720 x 400 @ 70Hz VGA 640 x 480 @ 60Hz MAC 640 x 480 @ 67Hz VESA 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA 800 x 600 @ 75Hz MAC 832 x 624 @ 75Hz VESA 1024 x 768 @ 60Hz VESA 1024 x 76...

Page 15 - Technical Information; Technical Specification

13 Technical Information Technical Specification Panel 18.5” TFT (with LED backlight) Power Management On: 18 Watts (typical), 25 Watts (maximum) Standby Mode: < 0.5 Watt Off: < 0.5 Watt Displayable Resolution WXGA 1366 x 768 max. Vertical Frequency 60Hz max. Pixel Dimension 0.3 x 0.3 mm Displ...

Page 16 - Wall-mount instruction; Preparing To Install The Optional Wall Mount Arm (not included)

14 Wall-mount instruction Preparing To Install The Optional Wall Mount Arm (not included) This LED LCD monitor can be attached to a wall mounting arm you can purchase separately. Turn the power OFF then disconnect the cables from the LED LCD monitor before performing the procedure below. 1. Lay the ...

Page 17 - Care and Maintenance; Care; Note; Safety Tips; Troubleshooting; No power; Power on but no screen image; Planar Support

15 Care and Maintenance Care  Avoid exposing your LED LCD monitor directly to sunlight or other heat source. Place your LED LCD monitor away from the sun to reduce glare.  Put your LED LCD monitor in a well ventilated area.  Do not place any heavy things on top of your LED LCD monitor.  Make cer...