Page 2 - Table of Contents; Usage Notice
2 Table of Contents Usage Notice Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Introduction About the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Package Overview . . . . . . . . . . . . . . . . . . . ....
Page 3 - Precautions; Turn off the product before cleaning.; Usage Notice
3 Precautions Follow all warnings, precautions and maintenance as recommended in thisuser’s manual to maximize the life of your unit. Do: Turn off the product before cleaning. Use only a dry soft cloth or clean room wiper whencleaning the LCD panel surface. Use only high quality and safety approved ...
Page 4 - Introduction
4 Introduction About Planar’s LA1910R / LA1910RTC The LA19 is a 19” flat panel screen with an active matrix, thin-film tran-sistor (TFT), liquid crystal display (LCD). Features include: Dual signal input: Analog VGA and Digital DVI-D Active matrix TFT LCD technology 1280 x 1024 SXGA resolution 19” v...
Page 5 - Capacitive for finger interface
5 Touch Screen (for LA1910RTC) Capacitive for finger interface Optical Clarity: Up to 88% light transmission Touch Contact Requirement: 3 ms for finger input Surface Scratch Hardness: Cannot be scratched using any stylus with Mohs' rating of less than 6.5. Durability: Touch screen has been tested in...
Page 6 - Package Overview
6 Package Overview LCD Display Power Adapter Power Cord VGA Signal Cable Quick Start Guide Touch Screen Driver Installation CD-ROM (for LA1910RTC) LCD Display
Page 7 - Installation; Product Overview; • Front View
7 Installation Product Overview • Front View • Rear View LCD Display Connector Ports “A&B”
Page 9 - Connecting the display; Connect the DC power cord to the power connector. Plug one end
9 Connecting the display (Figure 1.1) To configure this monitor, please refer to the following figure and procedures. 1. Be sure all equipment is off. 2. Connect the DC power cord to the power connector. Plug one end of the AC power cord into the power adapter, and the other end intoan electrical ou...
Page 11 - User Controls; Front Panel Controls
11 User Controls Front Panel Controls Displays the OSD menus Select- To select the adjustment itemsfrom OSD menus.Auto- To activate the “Auto Adjustment”function to obtain an optimum image To adjust brightness press the “-” buttonfirst1. Decreases the brightness of the dis-play image2. Decreases val...
Page 12 - How to Use the OSD Menus; Press the “Menu” button to pop up the on-screen menu and to select
12 How to Use the OSD Menus 1. Press the “Menu” button to pop up the on-screen menu and to select between the four main menus. 2. Choose the adjustment items by pressing the “Select/Auto” button. 3. Adjust the value of the adjustment items by pressing the “ ” button.
Page 13 - On-Screen Display Menus; Choose this function to obtain an optimum image.; Contrast; Changes the horizontal position of the image.; Vertical Position; Changes the vertical position of the image.; Frequency
13 On-Screen Display Menus First OSD Menu: Auto-Adjustment Choose this function to obtain an optimum image. Contrast This function allows the user to adjust the image crispness.Contrast adjusts the difference between white and black shades. Horizontal Position Changes the horizontal position of the ...
Page 14 - Display Mode; Adjusts the time it takes for the OSD menu to disappear.; Language; Chooses the language you need.; Sharpness; Adjust the sharpness of the image.; Reset
On-Screen Display Menus Second OSD Menu: Display Mode Selects this function to view the display resolution, vertical refresh,and horizontal scan of the current mode. OSD Off-Time Adjusts the time it takes for the OSD menu to disappear. Language Chooses the language you need. Text-Graphic Toggles bet...
Page 15 - Volume; Controls the sound volume.; Mute; Disables the sound immediately.; Video Source; Changes the video mode between multiple connections.
On-Screen Display Menus Third OSD Menu: Volume Controls the sound volume. Mute Disables the sound immediately. Video Source Changes the video mode between multiple connections. 15
Page 16 - Color; Adjusts the color temperature.; Color Adjustment-Green; Adjusts the green color of the display.; Color Adjustment-Blue; Adjusts the blue color of the display.
On-Screen Display Menus Fourth OSD Menu: Color Adjusts the color temperature. Color Adjustment-Red Adjusts the red color of the display. Color Adjustment-Green Adjusts the green color of the display. Color Adjustment-Blue Adjusts the blue color of the display. 16
Page 17 - Appendix; Troubleshooting; Make sure the pins of the connectors are not crooked or broken.; Problem: Partial image or incorrectly displayed image.; Use “Frequency” to make an adjustment.; Problem: Image is unstable and flickering; Use “Tracking” to make an adjustment.; Problem: Image is scrolling
17 Appendix Troubleshooting If you are experiencing trouble with the LCD display, refer to the following. Ifthe problem persists, please contact your local dealer or visit Planar Support atwww.planar.com/support. See support contact information on rear cover. Problem: No image appears on screen. Che...
Page 18 - Warning Signal; No Signal
18 Warning Signal There are instances when you will see warning messages from the LCD screen.This occurs when the LCD is unable to receive the exact signal from the com-puter graphic card. There are three instances when this may happen. Please check the cable con-nections or contact your local deale...
Page 19 - Product Dimensions
Page 20 - Compatibility Modes; Mode
20 Compatibility Modes IBM VGA IBM VGA IBM VGA IBM VGA VESA VGA VESA VGA VESA SVGA VESA SVGA VESA SVGA VESA SVGA VESA XGA VESA XGA VESA XGA VESA SXGA VESA SXGA Apple Mac Apple Mac Apple Mac Apple Mac 640 x 350 640 x 400 640 x 480 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 ...
Page 21 - Touch Screen Driver Installation; Driver Installation Process:; Open the Touchware folder; Touch Panel Setting and Calibration:; Open the “Control Panel” of the system.
21 Touch Screen Driver Installation Touch driver information is located on the enclosed CD-ROM for the followingoperating systems: Windows Me/2000/98/XP series. Driver Installation Process: 1. Before installing the touch driver be sure that the USB cable is dis-connected from the LCD. Please read ...