Pitco SSHLV14 - Manuals

Pitco SSHLV14 – Manual in PDF format online.

Manuals:

Manual

Manual Pitco SSHLV14

Summary

Page 2 - TO THE PURCHASER, OWNER AND STORE MANAGER; ii

TO THE PURCHASER, OWNER AND STORE MANAGER Please review these warnings prior to posting them in a prominent location for reference. ii L20-407 rev.1 (3/14) TO THE PURCHASER Post in a prominent location the instructions to be followed in the event that an operator smells gas. Obtain this information ...

Page 3 - INSTALLATION & OPERATIONAL SSHLV SERIES MANUAL

INSTALLATION & OPERATIONAL SSHLV SERIES MANUAL L20-407 rev. 1 (3/14) 3 1. THEORY OF OPERATION .............................................................................................................................. 5 2. INSTALLATION ............................................

Page 5 - THEORY OF OPERATION; product being fried.

INSTALLATION & OPERATIONAL SSHLV SERIES MANUAL L20-407 rev. 1 (3/14) 5 1. THEORY OF OPERATION The Pitco Low (or reduced) Oil Volume fryer works very similarly to the Pitco standard SG/SSH fryer. The Low Oil Volume Fryer has a reduced cold zone to significantly reduce oil usage and extend oil lif...

Page 7 - LEVELING THE FRYER – LEGS/CASTERS; higher or lower as needed. Refer to Figure 3C “FIXED” type caster.

INSTALLATION & OPERATIONAL SSHLV SERIES MANUAL L20-407 rev. 1 (3/14) 7 2.3. LEVELING THE FRYER – LEGS/CASTERS CAUTION To prevent equipment damage and/or personal injury, do not tilt the appliance onto any two of its casters or legs, or pull the appliance by the splash back . WARNING This applian...

Page 10 - WARNING

INSTALLATION & OPERATIONAL SSHLV SERIES MANUAL 10 L20-407 rev.1 (3/14) For Australia, the fryer must be installed in accordance with AS/NZS 5601, local authority and any other relevant statutory regulations. Flexible hose (if used) must comply with AS/NZS 1869 Class B or D, be of appropriate int...

Page 11 - ADJUSTMENTS; To perform these adjustments the following tools will be needed:

INSTALLATION & OPERATIONAL SSHLV SERIES MANUAL L20-407 rev. 1 (3/14) 11 ON OFF PUSH BLUE HANLDE IN 2.11. INITIAL ADJUSTMENTS After your appliance has been properly installed as described in the installation section of this manual, it will need to be adjusted to ensure that it will perform as des...

Page 12 - Note: This procedure requires the use of a DC microammeter.

INSTALLATION & OPERATIONAL SSHLV SERIES MANUAL 12 L20-407 rev.1 (3/14) OFF ON A) Burner Pressure Tap B) Pilot Adjustment Screw Cap C) ON/OFF Knob D) Burner Pressure Adjustment Screw Cap E) Inlet Pressure Tap 2.11.3. PILOT FLAME ADJUSTMENT Perform this procedure with the pilot lit. Note: This pro...

Page 13 - CLEANING

INSTALLATION & OPERATIONAL SSHLV SERIES MANUAL L20-407 rev. 1 (3/14) 13 To adjust the pressure, remove the regulator adjustment screw cap and, with a flat head screwdriver, adjust the regulator screw until the proper burner pressure is reached. Turning the screw clockwise will increase the burne...

Page 17 - APPLIANCE START UP; button to turn the controller on.; OIL TEMPERATURE

INSTALLATION & OPERATIONAL SSHLV SERIES MANUAL L20-407 rev. 1 (3/14) 17 WARNING Oil level should NOT be allowed to fall below the minimum indicated level line at any time. Dry firing of the elements may cause a fire, and can shorten element service life. Evidence of dry firing will void your war...

Page 18 - This table is for reference only. Please refer; TIPS

INSTALLATION & OPERATIONAL SSHLV SERIES MANUAL 18 L20-407 rev.1 (3/14) Typical French Fry Cook Times Fry Thickness 350F 360F 370F (177C) (182C) (188C) Thin 2:45 2:30 2:15 medium 3:45 3:30 3:15 Thick 4:15 4:00 3:45 This table is for reference only. Please refer to the product manufacturer’s speci...

Page 19 - COMPUTER CONTROLLER OPERATION; TO TURN THE APPLIANCE ON:

INSTALLATION & OPERATIONAL SSHLV SERIES MANUAL L20-407 rev. 1 (3/14) 19 4 5. COMPUTER CONTROLLER OPERATION 3 1 L 2 5 4 6 8 7 0 9 R 5.1. TO TURN THE APPLIANCE ON: If power is applied to the appliance, the displays will show [OFF]. Press the [I/O] key. Displays will show one of the normal displays...

Page 20 - INSTALLATION & OPERATIONAL SGLV MANUAL; TO VIEW CURRENT SETTINGS FOR COOK, SHAKE, AND HOLD; response to the boil prompt. If pressed, display will show:

INSTALLATION & OPERATIONAL SGLV MANUAL 20 L20-407 rev.1 (3/14) 4 1 2 2 0 0 1 5.6. TO VIEW CURRENT SETTINGS FOR COOK, SHAKE, AND HOLD TIMES: To view the current settings for any product key, press the clock key, followed by the desired product key. The display will show [CKn mm:ss], followed by [...

Page 21 - TO SET COOK TEMPERATURE:

INSTALLATION & OPERATIONAL SSHLV SERIES MANUAL L20-407 rev. 1 (3/14) 21 Level 1 & 2 Password 6 8 6 4 5.8. TO ENTER PROGRAMMING LEVEL 1 (FOR THE STORE MANAGER): Note: The factory default setting for this control does not require an operator password to be entered. However, the operator passwo...

Page 24 - Note: This key has no function of single vat controls.; SHUTDOWN

INSTALLATION & OPERATIONAL SGLV MANUAL 24 L20-407 rev.1 (3/14) 8 5.20. CONTROL OR TIMER: (RIGHT SIDE OF DUAL VAT) Note: This key has no function of single vat controls. With display showing [PROGRAM], press the product key [0]. Display shows [SELECT] [OPTIONS]. Press product key 8; display will ...

Page 25 - BASKET LIFT OPERATION; It is not intended for filling the frypot

INSTALLATION & OPERATIONAL SSHLV SERIES MANUAL L20-407 rev. 1 (3/14) 25 LOW BOTTLE LIGHT 6. BASKET LIFT OPERATION If the appliance is equipped with basket lifts, place the basket onto the basket lift prior to starting the timer(s). The basket(s) will be lowered into the cook tank when a product ...

Page 26 - QUICK STRAIN FILTERING “Filter Soon” light flashing

INSTALLATION & OPERATIONAL SGLV MANUAL 26 L20-407 rev.1 (3/14) 9. QUICK STRAIN FILTERING “Filter Soon” light flashing ( WARNING: Turn OFF Fryer, before filtering. Wear oil proof, insulated gloves while filtering.) Refer to the following procedure for quick strain filtering. FILTER SOON LIGHT. Fl...

Page 27 - APPLIANCE SHUTDOWN; MODE; Press and hold the; MAINTENANCE; Matchless Ignition

INSTALLATION & OPERATIONAL SSHLV SERIES MANUAL L20-407 rev. 1 (3/14) 27 11. APPLIANCE SHUTDOWN There are two shutdown modes of appliance operation: STANBY and COMPLETE. The standby mode removes the ability of the appliances main burners to operate. Complete shutdown turns off the gas supply to t...

Page 29 - Check that the high temperature limit

INSTALLATION & OPERATIONAL SSHLV SERIES MANUAL L20-407 rev. 1 (3/14) 29 WARNING Serious injury could result from direct contact with hot surfaces and/or oil. Always wear apron, heat resistant gloves for skin protection and goggles for eye protection WARNING DO NOT leave the appliance unattended ...

Page 33 - HOOD

INSTALLATION & OPERATIONAL SSHLV SERIES MANUAL L20-407 rev. 1 (3/14) 33 12.4.5. GAS COMBUSTION SYSTEM  Check for gas leaks.  Check and clean vent tube on gas valve pressure regulator.  Check burners, clean debris and grease from pilot and pilot orifice tips.  Check self cleaning burner syste...

Page 34 - FAILURE

INSTALLATION & OPERATIONAL SGLV MANUAL 34 L20-407 rev.1 (3/14) 13. TROUBLESHOOTING 13.1. POWER FAILURE If electric power is removed for any reason, the appliance will shut down. Wait five minutes after the power is restored before attempting to restart the appliance. This will allow time for any...

Page 37 - Display

INSTALLATION & OPERATIONAL SGLV MANUAL L20-407 rev. 1 (3/14) 37 13.6.3. COMPUTER & DIGITAL CONTROLLER DISPLAYS (IF EQUIPPED) If your appliance is equipped with a computer or digital controller it may display the following messages on its display. Display Problems Action Controller is OFF...