Pitco B2005303 SSTC - Manuals

Pitco B2005303 SSTC – Manual in PDF format online.

Manuals:

Manual Pitco B2005303 SSTC

1 Page 1
2 Page 2
3 Page 3
4 Page 4

Summary

Page 2 - This green indicator shows the control is turned on.; Heat Demand Indicator:; BACKUP; FLAT BOTTOM

Solid State Temperature Control (SSTC) L20-314 Rev 0 (9/7/07) Page 2 1 Switch and Indicator Locations and Function: On / Off switch: Turns the control on or off. The power indicator will be illuminated when the switch is in the onposition. Primary / Backup select switch: In appliances with primary A...

Page 3 - Turn the appliance ON:; Place the melt switch in the desired position, typically Melt; To turn the appliance OFF:; Start with control in the OFF condition.; Drain Valve Interlock:; Close the drain valve.

Solid State Temperature Control (SSTC) Page 3 L20-314 (9/7/07) 2 Operation: 2.1 Turn the appliance ON: Place the melt switch in the desired position, typically Melt . No melt may also be selected only if vat is filled with liquid cooking oil. Turn the control ON bypressing the rocker switch to the “...

Page 4 - High Limit device is tripped and needs to be reset.; Open or Shorted Probe:; This condition requires repair of the probe, or related wiring.; Field Calibration

Solid State Temperature Control (SSTC) L20-314 (9/7/07) Page 4 3 Fault Detection 3.1 High Limit Trip or “Heat Failure”: This control monitors the appliance response to heat demand signals.Under normal conditions the heat feed back indicator follows the heatdemand indicator. When the appliance fails ...

Pitco Manuals