Pioneer SX-LX70SW - Manuals
Pioneer SX-LX70SW – Manual in PDF format online.
Manuals:
Manual Pioneer SX-LX70SW
Summary
IMPORTANT NOTICE – THE SERIAL NUMBER FOR THIS EQUIPMENT IS LOCATED IN THE REAR. PLEASE WRITE THIS SERIAL NUMBER ON YOUR ENCLOSED WARRANTY CARD AND KEEP IN A SECURE AREA. THIS IS FOR YOUR SECURITY. D1-4-2-6-1_En NOTE: This equipment has been tested and found to comply with the limits for a Class B di...
WARNING The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e.g., 230 V or 120 V) written on the rear face. D3-4-2-1-4_A_En Before plugging in for the first time, ...
This product is for general household purposes. Any failure due to use for other than household purposes (such as long-term use for business purposes in a restaurant or use in a car or ship) and which requires repair will be charged for even during the warranty period. K041_En POWER-CORD CAUTION Han...
S001_En Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics G...
6 En Contents Thank you for buying this Pioneer product. Please read through these operating instructions so that you will know how to operate your model properly. After you have finished reading the instructions, put them in a safe place for future reference . Contents What’s in the box . . . . . ....
7 En Contents Eng lish 08 Other connections Connecting auxiliary components . . . . . . . . . . . . . . 38 Connecting for digital audio . . . . . . . . . . . . . . . . . 38 Connecting an analog audio component . . . . . . . . 38 Connecting an iPod . . . . . . . . . . . . . . . . . . . . . . . . 39 L...
Speaker Setup Guide 01 8 En Chapter 1 Speaker Setup Guide Safety precautions when setting up When assembling the speakers, lay them down flat on their side to avoid accidents or injury. Make sure to use a stable surface when assembling, setting up, and placing the speakers. Home theater sound setup ...
Speaker Setup Guide 01 9 En Eng lish 2 Attach the speaker bases. Place the speaker atop a supplied speaker base, and fix the base in place by using one of the supplied screws. • The supplied speaker bases come in two different shapes. You can determine the correct base for a speaker by checking if t...
Connecting up 02 10 En Chapter 2 Connecting up Receiver subwoofer Side panel • There is a cover over the connectors on the side panel.A. When making connections, lift the two hooks and remove the cover.B. Once connections are finished, line up the three positions and place the cover back in its orig...
Connecting up 02 11 En Eng lish Rear panel 10 HDMI OUT connector Connect to a television that has an HDMI terminal. 11 HDMI IN connectors (x3) Use high-quality audio/video connection with compatible HDMI devices. To select this input, choose HDMI 1 to HDMI 3 . 12 SYSTEM connector Connect to the disp...
Connecting up 02 12 En Basic connections Important • When connecting this system or changing connections, be sure to switch power off and disconnect the power cord from the wall socket.After completing all connections, connect the power cords to the wall socket. WARNING • Pioneer bears no responsibi...
Connecting up 02 13 En Eng lish 1 Connect the display unit to the receiver subwoofer. Plug the display cable into the connector on the rear of the display unit, then plug the other end of the display cable into SYSTEM connector on the receiver subwoofer. Caution • Do not attempt to attach the displa...
Connecting up 02 14 En Caution • These speaker terminals carry HAZARDOUS LIVE voltage . To prevent the risk of electric shock when connecting or disconnecting the speaker cables, disconnect the power cord before touching any uninsulated parts. • Do not connect any speakers other than those supplied ...
Connecting up 02 15 En Eng lish 8 Connect the power cord. 1 • Connect each power cord to the AC inlet on the receiver subwoofer. Connect each power cord to a wall socket in the following order. 1. Receiver subwoofer2. TV • Run the cords that are connected to the side panel of the receiver subwoofer ...
Controls and displays 03 16 En Chapter 3 Controls and displays Display unit 1 STANDBY/ON Press to switch the receiver subwoofer on/into standby. 2 INPUT SELECTOR (page 38) Press repeatedly to select one of the external audio inputs ( HDMI 1 to HDMI 3 , Digital 1 , Digital 2 , Analog , iPod or Fron...
Controls and displays 03 18 En Remote control • For more information on using the remote control, see Operating the remote control on page 26. Operating the receiver subwoofer This section explains how to operate the remote control for the receiver subwoofer. Note that the controls change when you h...
Controls and displays 03 19 En Eng lish 10 RCV Use to switch to the receiver subwoofer operating mode when this unit is in the other operating modes. Press again to return to the previous operating mode. 11 VOL +/– Use to adjust the volume of the receiver subwoofer. 12 MUTE Mutes the sound or restor...
Controls and displays 03 20 En Operating XM Radio or SIRIUS Radio 1 /// (cursor buttons) and ENTER Use to control XM or SIRIUS radio functions. 2 SETUP Use to access the menu system settings. 3 RETURN Use to cancel settings. LCD touch screen 4 Number buttons Use to directly choose a preset radio...
Controls and displays 03 22 En Operating a Pioneer Blu-ray Disc player 1 SOURCE Switches the power for a Blu-ray disc player to On/Standby. 2 PAGE </> Switch between pages on the LCD touch screen when multiple pages are present. 3 TOP MENU / DISC NAVIGATOR Press to display the top menu of a ...
Controls and displays 03 24 En Operating a Pioneer HDD/DVD Recorder 1 SOURCE Switches the power for a HDD/DVD recorder to On/Standby. 2 PAGE </> Switch between pages on the LCD touch screen when multiple pages are present. 3 TOP MENU / DISC NAVIGATOR Press to display the top menu if a DVD-Vi...
Controls and displays 03 26 En Using the remote control Please keep in mind the following when using the remote control: • Make sure that there are no obstacles between the remote and the remote sensor on the unit. • Remote operation may become unreliable if strong sunlight or fluorescent light is s...
Controls and displays 03 27 En Eng lish Note To temporarily control the receiver while listening to audio from a connected component on this unit, press RCV . The selected input will not change, and the remote changes to Receiver mode. To return to the previous operating mode, press RCV once more. U...
Getting started 04 28 En Chapter 4 Getting started Important • Press to set the remote control to receiver control mode in order to operate the receiver subwoofer (make sure that the LCD displays the RECEIVER screen, as shown below). Using the Auto MCACC setup for optimal surround sound The Multicha...
Listening to your system 05 29 En Eng lish Chapter 5 Listening to your system Important • Press to set the remote control to receiver control mode in order to operate the receiver subwoofer (make sure that the LCD displays the RECEIVER screen, as shown below). Effective Sound (for optimum sound) Wit...
Listening to your system 05 30 En With two channel sources , you can select from: • Auto – Auto listening mode (see page 29) • 2 PL II Movie (Dolby Pro Logic II Movie) – 5.1 channel surround sound, especially suited to movie sources • 2 PL II Music (Dolby Pro Logic II Music) – 5.1 channel surround s...
Listening to your system 05 31 En Eng lish • Ent.Show – Suitable for musical sources • Expanded – Creates an extra wide stereo field • TV Surround – Provides surround sound for both mono and stereo TV sources • Advanced Game – Suitable for video games • Sports – Suitable for sports programs • Classi...
Listening to the radio 06 33 En Eng lish Chapter 6 Listening to the radio Important • To listen to the radio, press the TUNER button to set the remote control to FM/AM control mode. The LCD screen on the remote control changes to the TUNER screen. Listening to the radio The tuner can receive both FM...
Listening to the radio 06 34 En Memorizing stations You can save up to 30 station presets so that you always have easy access to your favorite stations without having to tune in manually each time. 1 Tune to an FM or AM radio station. Select mono or auto-stereo reception (FM) or the Noise Cut mode (...
Surround sound settings 07 35 En Eng lish Chapter 7 Surround sound settings Important • Press to set the remote control to receiver control mode in order to operate the receiver subwoofer (make sure that the LCD displays the RECEIVER screen, as shown below). Using the Sound Setup menu From the Sound...
Surround sound settings 07 36 En Dynamic Range Control When watching Dolby Digital or DTS material at low volume, low level sounds — including some of the dialog — can be difficult to hear properly. Using one of the Dynamic Range Control (DRC) settings can help by bringing up the low level sounds, w...
Other connections 08 38 En Chapter 8 Other connections Important • When making or changing connections on the side panel of this unit, be sure to switch power off and disconnect the power cord from the wall socket.After completing all connections, connect the power cord to the wall socket. Connectin...
Other connections 08 39 En Eng lish Connecting an iPod You can use the iPod jack on the display unit to playback music from an iPod. All operations can be carried out via the iPod. Use the supplied iPod cable to connect an iPod to this unit. • When you connect an iPod, this unit’s input automaticall...
Other connections 08 40 En Using XM Radio Connecting your XM Radio receiver After purchasing an XM Mini-Tuner (sold separately), you will also need to activate the XM Radio digital radio service to receive broadcasts. 1 Connect an XM Mini-Tuner to the XM IN jack on the side of this receiver subwoofe...
Other connections 08 41 En Eng lish Listening to channel presets You will need to have some presets stored to do this. 1 Press to select the class in which the channel is stored. Press repeatedly to cycle through classes A, B and C. 2 Press to select the channel preset you want. • You can also use t...
Other connections 08 42 En Using SIRIUS Radio With SIRIUS you get The Best Radio on Radio™ with all your favorite entertainment including 100 % commercial-free music, plus superior sports coverage, uncensored talk and comedy, world-class entertainment, news, weather and more for your car, home or of...
Other connections 08 43 En Eng lish Saving channel presets This receiver can memorize up to 30 channels, stored in three banks, or classes (A, B and C) of 10 stations each. 1 1 Select the channel you want to memorize. See Selecting channels and browsing by genre on page 42. 2 Press T.EDIT. The displ...
Other connections 08 44 En Connecting external antennas For an external AM antenna, use 15 ft. to 18 ft. (5 to 6 meters) of vinyl-insulated wire and set up either indoors or outdoors. Leave the loop antenna connected. For an external FM antenna, use a PAL connector to hook up an external FM antenna....
Other connections 08 45 En Eng lish 1 Use an HDMI cable to connect the HDMI IN 1 to 3 interconnect on this receiver subwoofer to an HDMI output on your HDMI component. Once this receiver subwoofer is properly connected to your HDMI component, the HDMI indicator (red) lights up on the display unit wh...
HDMI Control 09 46 En Chapter 9 HDMI Control By connecting this unit to an HDMI Control-compatible Pioneer plasma display or the HDD/DVD recorder with an HDMI cable, you can control this unit from the remote control of a connected plasma display, as well as have the connected plasma display automati...
HDMI Control 09 47 En Eng lish • Connect the plasma display directly to this unit. Interrupting a direct connection with other amps or an AV converter (such as an HDMI switch) can cause operational errors. • Only connect components you intend to use as a source to the HDMI input of this unit. Interr...
HDMI Control 09 48 En Setting the Auto Delay This feature automatically corrects the audio-to-video delay between components connected with an HDMI cable. The audio delay time is set depending on the operational status of the display connected with an HDMI cable. The audio delay time is automaticall...
Additional information 10 49 En Eng lish Chapter 10 Additional information Important • Press to set the remote control to receiver control mode in order to operate the receiver subwoofer (make sure that the LCD displays the RECEIVER screen, as shown below). Dimming the display You can choose to dim ...
Additional information 10 50 En TV Preset code list Please note that there are cases where only certain functions may be controllable after assigning the proper preset code, or the codes for the manufacturer in the list will not work for the model that you are using. Resetting the system Use this pr...
Additional information 10 51 En Eng lish Surround sound formats Below is a brief description of the main surround sound formats you’ll find on DVDs, satellite, cable and terrestrial broadcasts, and video cassettes. Dolby The Dolby technologies are explained below. See www.dolby.com for more detailed...
Additional information 10 52 En DTS Digital Surround DTS Digital Surround is a 5.1-channel audio coding system from DTS Inc. now widely used for DVD-Video, DVD-Audio, 5.1 music discs, digital broadcasts, and video games. It can deliver up to six discrete audio channels, comprising five full range ch...
Additional information 10 54 En Displayed Messages General Message Description 192kHz PCMSACDDTS-HDDTS ExpressDolby TrueHDDolby D+ These messages are displayed when you operate a function incompatible with the audio source being played back. No MIC Displays when you press MCACC when the MCACC setup ...
Additional information 10 56 En Specifications SX-LX70SW Audio Multi-channel Receiver Subwoofer • Amplifier section RMS Power Output (8 channel output): Front (L/R) . . . . . . . . . . . . . . . . . . . . . 100 W (50 W + 50 W) (1 kHz, 10 % T.H.D., 8 Ω ) Dual Center (CL/CR). . . . . . . . . . . . . 1...
Additional information 10 57 En Eng lish SSP-LX70ST Satellite Speaker (Front/center speakers x2, Surround speakers x2) • Front/center speakers Enclosure . . . . . . . . . . . . . . . . . . . . Closed-box bookshelf type (magnetically shielded) System . . . . . . . . . . . . . . . . . . . . . . . . . ...
REMARQUE : Cet appareil a été testé et déclaré conforme aux limites imposées aux appareils numériques de Classe B, telles que définies dans l’article 15 de la Réglementation de la FCC. Ces limites sont destinées à protéger de façon raisonnable des interférences pouvant apparaître dans une installati...
Lire attentivement ces instructions.Conserver ces instructions.Lire toutes les mises en garde.Suivre toutes les instructions.Ne pas utiliser cet appareil près d’une source d’eau.Ne nettoyer qu’avec un chiffon sec.Ne pas bloquer les évents d’aération. Installer l’appareil selon les instructions du fa...
S001_Fr Le choix d’un équipement audio tel que celui que vous venez d’acheter n’est qu’un prélude à votre plaisir musical. Vous devez maintenant vous demander comment optimiser votre divertissement et l’agrément que procure un tel équipement. Le fabricant et le Groupe des Appareils Électroniques Gra...
6 Fr Nous vous remercions d’avoir acheté ce produit Pioneer. Veuillez lire attentivement ces instructions d’utilisation afin d’apprendre à manipuler votre modèle correctement. Lorsque vous avez terminé, rangez ces instructions en lieu sûr afin de pouvoir vous y référer, au besoin. Table des matières...
7 Fr Français 08 Autres connexions Connexion de composants auxiliaires . . . . . . . . . . . 38 Raccordement pour l’écoute du son audio numérique . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Connexion d’un composant audio analogique . . . . 38 Raccordement d’un iPod . . . . . . ....
01 8 Fr Chapitre 1 Guide d’installation des enceintes Précautions de sécurité lors de l’installation Lors de l’installation des enceintes, posez-les à plat sur leur flanc pour éviter des accidents ou des blessures. Veillez à utiliser une surface stable lors de l’assemblage, de l’installation et de l...
01 9 Fr Français 2 Fixez les bases de enceintes. Posez l’enceinte sur une des bases d’enceinte fournies et fixez la base avec une des vis fournies. • Les bases de enceintes sont fournies sous deux formes différentes. Vous pouvez savoir quelle base vous devez utiliser pour une enceinte en vérifiant s...
02 10 Fr Chapitre 2 Connexions Caisson de basses à récepteur Panneau latéral • Un couvercle protège les prises du panneau latéral. A. Pour effectuer les connexions, tirez vers le haut les deux onglets et détachez le couvercle.B. Lorsque les connexions sont terminées, alignez les trois repères et rem...
02 11 Fr Français Panneau arrière 10 Connecteur HDMI OUT Raccordez-le à un téléviseur pourvu d’une prise HDMI. 11 Connecteurs HDMI IN (x3) Utilisez une liaison audio/vidéo de haute qualité pour relier des appareils HDMI compatibles. Pour sélectionner cette entrée, sélectionnez HDMI 1 à HDMI 3 . 12 C...
02 12 Fr Connexions de base Important • Lors du branchement de cet appareil ou avant de changer ses connexions, coupez l’interrupteur d’alimentation et débranchez le cordon d’alimentation au niveau de la prise secteur.Toutes les connexions étant terminées, branchez le cordon d’alimentation sur la pr...
02 13 Fr Français 1 Raccordez l’unité d’affichage sur le caisson de basses à récepteur. Branchez le câble d’affichage sur le connecteur prévu à l’arrière de l’unité d’affichage, puis branchez l’autre extrémité de ce câble sur le connecteur SYSTEM sur le caisson de basses à récepteur. Attention • N’e...
02 14 Fr Attention • Ces bornes d’enceintes ont une tension POTENTIELLEMENT MORTELLE . Pour éviter toute décharge électrique lors du branchement ou du débranchement des câbles d’enceintes, débranchez le cordon d’alimentation avant de toucher des pièces non isolées. • Ne raccordez à ce système que le...
02 15 Fr Français 8 Branchez le cordon d’alimentation. 1 • Branchez chaque cordon d’alimentation sur la prise secteur (CA) du caisson de basses à récepteur. Branchez chaque cordon d’alimentation sur une prise murale de la façon suivante. 1. Caisson de basses à récepteur2. Téléviseur • Faites passer ...
03 16 Fr Chapitre 3 Commandes et écrans Unité d’affichage 1 STANDBY/ON Appuyez pour mettre le caisson de basse à récepteur sous tension ou en mode veille. 2 INPUT SELECTOR (page 38) Appuyez de manière répétée sur une des entrées audio externes ( HDMI 1 à HDMI 3 , Digital 1 , Digital 2 , Analog , i...
03 18 Fr Télécommande • Pour de plus amples informations sur l’emploi de la télécommande, voir Utilisation de la télécommande à la page 26. Fonctionnement du caisson de basses à récepteur Cette section explique comment utiliser la télécommande pour agir sur le caisson de basses à récepteur. Notez qu...
03 19 Fr Français 10 RCV Utilisez pour passer au mode de fonctionnement du caisson de basses à récepteur lorsque cet appareil est dans un autre mode de fonctionnement. Appuyez une nouvelle fois pour revenir au mode de fonctionnement précédent. 11 VOL +/– Utilisez pour ajuster le volume du caisson de...
03 22 Fr Fonctionnement d’un lecteur de disque Blu-ray Pioneer 1 SOURCE Met le lecteur de disque Blu-ray sous tension ou en veille. 2 PAGE </> Change la page affichée sur l’écran tactile en présence de plusieurs pages. 3 TOP MENU / DISC NAVIGATOR Appuyez pour afficher le menu principal d’un ...
03 24 Fr Fonctionnement d’un enregistreur HDD/DVD Pioneer 1 SOURCE Met l’enregistreur HDD/DVD sous tension ou en veille. 2 PAGE </> Change la page affichée sur l’écran tactile en présence de plusieurs pages. 3 TOP MENU / DISC NAVIGATOR Appuyez pour afficher le menu principal si un disque DVD...
03 26 Fr Utilisation de la télécommande Gardez les points suivants à l’esprit quand vous utilisez la télécommande : • Assurez-vous qu’aucun obstacle ne se trouve entre la télécommande et le capteur de ses signaux sur l’appareil. • Le fonctionnement de la télécommande peut devenir instable si une for...
03 27 Fr Français Remarque Pour agir temporairement sur le récepteur tout en écoutant le son d’un composant raccordé à cet appareil, appuyez sur RCV . L’entrée sélectionnée ne change pas et la télécommande se met en mode Récepteur. Pour revenir au mode de fonctionnement précédent, appuyez sur RCV . ...
04 28 Fr Chapitre 4 Pour commencer Important • Appuyez sur cette touche pour mettre la télécommande en mode de commande de récepteur pour pouvoir agir sur le caisson de basses à récepteur (assurez-vous que l’écran RECEIVER suivant s’affiche). Utilisation de la configuration Auto MCACC pour obtenir u...
05 29 Fr Français Chapitre 5 Ecoute de votre système Important • Appuyez sur cette touche pour mettre la télécommande en mode de commande de récepteur pour pouvoir agir sur le caisson de basses à récepteur (assurez-vous que l’écran RECEIVER suivant s’affiche). Effective Sound (pour un son optimal) A...
05 30 Fr Pour les sources comportant deux canaux , vous pouvez sélectionner au choix : • Auto – Mode d’écoute Auto (voir page 29) • 2 PL II Movie (Dolby Pro Logic II Movie) – Jusqu’à 5.1 canaux, particulièrement adapté aux sources cinématographiques • 2 PL II Music (Dolby Pro Logic II Music) – Jusqu...
05 31 Fr Français • Ent.Show – Adapté aux sources musicales • Expanded – Crée un champ stéréo très large • TV Surround – Fournit un son d’ambiance pour les sources TV mono et stéréo • Advanced Game – Adapté aux jeux vidéo • Sports – Adapté aux programmes sportifs • Classical – Offre un son digne d’u...
06 33 Fr Français Chapitre 6 Ecoute de la radio Important • Pour écouter la radio, appuyez sur la touche TUNER pour mettre la télécommande en mode de commande FM/AM. L’écran TUNER s’affiche sur l’écran LCD de la télécommande. Ecoute de la radio Le syntoniseur peut recevoir des émissions FM et AM. Il...
07 35 Fr Français Chapitre 7 Réglages de sonorités d’ambiance Important • Appuyez sur cette touche pour mettre la télécommande en mode de commande de récepteur pour pouvoir agir sur le caisson de basses à récepteur (assurez-vous que l’écran RECEIVER suivant s’affiche). Utilisation du menu Sound Setu...
08 38 Fr Chapitre 8 Autres connexions Important • Avant de relier les appareils du système ou de changer les liaisons sur le panneau arrière de cet appareil, veillez à couper l’alimentation et à débrancher le cordon d’alimentation de la prise secteur.Toutes les connexions étant terminées, branchez l...
08 39 Fr Français Raccordement d’un iPod Vous pouvez utiliser la prise iPod sur l’unité d’affichage pour écouter de la musique d’un iPod. Toutes les opérations peuvent être effectuées sur le iPod. Utilisez le câble iPod fourni pour relier un iPod à cet appareil. • Lorsque vous raccordez un iPod, l’e...
08 40 Fr Utilisation du système XM Radio Raccordement d’un récepteur XM Radio Après vous être procuré un mini-syntoniseur XM (vendu séparément), vous devez activer le service de la radio numérique de XM Radio pour recevoir des émissions. 1 Raccordez un mini-syntoniseur XM à la prise XM IN sur le côt...
08 41 Fr Français Écoute des chaînes préréglées Pour ce faire, vous devez avoir préréglé des stations. 1 Appuyez pour sélectionner la classe où la chaîne a été enregistrée. Appuyez plusieurs fois pour faire défiler les classes A, B et C. 2 Appuyez pour sélectionner la chaîne préréglée souhaitée. • V...
08 42 Fr Utilisation du système SIRIUS Radio Avec SIRIUS, vous pouvez écouter The Best Radio on Radio™ et toutes vos émissions préférées, en particulier des émissions musicales 100 % sans pauses publicitaires, d’excellentes retransmissions sportives, des discussions et comédies non censurées, des di...
08 43 Fr Français Sauvegarde des stations préréglées Ce récepteur peut mémoriser jusqu’à 30 stations, enregistrées dans trois banques ou classes (A, B et C) de 10 stations chacun(e). 1 1 Sélectionnez la chaîne que vous souhaitez mettre en mémoire. Voir Sélection de chaînes et recherche par genre à l...
08 44 Fr Connexion d’antennes extérieures Comme antenne AM extérieure, utilisez un fil à gaine de vinyle de 5 à 6 mètres et installez-le à l’intérieur ou à l’extérieur. Ne débranchez pas l’antenne cadre. Pour raccorder une antenne FM extérieure, utilisez un connecteur PAL. A propos des connexions po...
08 45 Fr Français 1 Utilisez un câble HDMI pour relier un des connecteurs HDMI IN 1 à 3 de ce caisson de basses à récepteur à une sortie HDMI de votre composant HDMI. Une fois que le caisson de basses à récepteur a été raccordé au composant HDMI, l’indicateur HDMI (rouge) s’allume sur l’unité d’affi...
09 46 Fr Chapitre 9 HDMI Control En reliant cet appareil à un écran plasma Pioneer compatible avec la fonction HDMI Control ou à un enregistreur HDD/DVD par un câble HDMI, vous pourrez utiliser la télécommande de l’écran plasma raccordé pour agir sur cet appareil. De même, l’entrée de l’écran plasma...
09 47 Fr Français • Raccordez l’écran plasma directement à cet appareil. L’interruption d’une liaison directe avec d’autres amplificateurs ou un convertisseur AV (par exemple un commutateur HDMI) peut entraîner des problèmes de fonctionnement. • Ne raccordez que les composants que vous voulez utilis...
09 48 Fr Réglage du retard automatique Cette fonction corrige automatiquement le retard entre le son et l’image des composants raccordés par un câble HDMI. La durée du retard audio est réglée en fonction du mode de fonctionnement de l’téléviseur raccordé par un câble HDMI. La durée du retard audio s...
10 49 Fr Français Chapitre 10 Informations complémentaires Important • Appuyez sur cette touche pour mettre la télécommande en mode de commande de récepteur pour pouvoir agir sur le caisson de basses à récepteur (assurez-vous que l’écran RECEIVER suivant s’affiche). Régler la luminosité de l’afficha...
10 50 Fr Liste des codes de préréglage des téléviseurs Veuillez noter que, dans certains cas, seules certaines fonctions sont contrôlables après avoir attribué le code de préréglage adéquat, ou que les codes fabricant de cette liste n’agiront pas avec le modèle de téléviseur que vous utilisez. Réini...
10 51 Fr Français Formats de son d’ambiance Vous trouverez ci-dessous une brève description des principaux formats de son d’ambiance disponibles pour les DVD, les émissions satellite, câblées ou terrestres et les cassettes vidéo. Dolby Les technologies Dolby sont expliquées ci-dessous. Voir le site ...
10 52 Fr DTS Digital Surround DTS Digital Surround est un système de codage audio 5.1 canaux conçu par DTS Inc. Il est désormais largement utilisé pour les DVD-Vidéo, les DVD-Audio, les disques musicaux 5.1, les émissions numériques et les jeux vidéo. Il peut fournir jusqu’à six canaux audio séparés...
10 54 Fr Messages d’erreur Problèmes d’ordre général Message Description 192kHz PCMSACDDTS-HDDTS ExpressDolby TrueHDDolby D+ Ces messages apparaissent si vous essayez d’utiliser une fonction qui n’est pas compatible avec la source audio en cours de lecture. No MIC Apparaît si vous appuyez sur MCACC ...
10 56 Fr Caractéristiques techniques Caisson de basse de rècepteur multi-voies audio SX-LX70SW • Section amplificateur Puissance de sortie RMS (sortie 8 canaux) : Avant (G/D) . . . . . . . . . . . . . . . . . . . . 100 W (50 W + 50 W) (1 kHz, 10 % D.H.T., 8 Ω ) Centre double (CG/CD) . . . . . . . . ...
10 57 Fr Français Enceinte satellite SSP-LX70ST (Enceintes avant/centrale x2, Enceintes d’ambiance x2) • Enceintes avant/centrale Coffret . . . . . . . . . . . . . . . . . . . . . Type étagère à boîtier fermé (blindage contre magnétisme) Système . . . . . . . . . . . . . . . . . . . . . Système de 5...
Printed inImprimé en <ARE7639-A> Register Your Product at http://www.pioneerelectronics.com (US)http://www.pioneerelectronics.ca (Canada) Enregistrez votre produit sur le site Web http://www.pioneerelectronics.com (US)http://www.pioneerelectronics.ca (Canada) Published by Pioneer Corporation.C...
Pioneer Manuals
-
Pioneer AHU
User Manual
-
Pioneer DMH WT6000NEX
User Manual
-
Pioneer DMH 2000NEX
User Manual
-
Pioneer DMH W3000NEX
User Manual
-
Pioneer DMH W3050NEX
User Manual
-
Pioneer HEAT PUMP
User Manual
-
Pioneer MINI-SPLITS OUTDOOR
User Manual
-
Pioneer SL405
User Manual
-
Pioneer AST-12UW3SXE**02
User Manual
-
Pioneer AST-09UW3SXE**01
User Manual
-
Pioneer ND BC010
User Manual
-
Pioneer TS A4671F
User Manual
-
Pioneer TS A653CH
User Manual
-
Pioneer TS A653FH
User Manual
-
Pioneer TS A683FH
User Manual
-
Pioneer TS A693CH
User Manual
-
Pioneer TS A693FH
User Manual
-
Pioneer VSX LX805
User Manual
-
Pioneer PN43 751 24U
User Manual
-
Pioneer PN50 751 24U
User Manual