Pioneer S-X360 - Manuals

Speaker Setup Guide 01 6 En Chapter 1 Speaker Setup Guide Safety precautions when setting up When assembling the speakers, lay them down flat on their side to avoid accidents or injury. Make sure to use a stable surface when assembling, setting up, and placing the speakers. • Attach the smaller non-...

Speaker Setup Guide 01 7 En English Front surround setup This setup is ideal when rear surround speaker placement isn't possible or you want to avoid running long speaker cables in your listening area. Use this setup together with the Front Surround modes in page 19 to take advantage of wall and cei...

Speaker Setup Guide 01 8 En Wall mounting the front and surround speaker system The front and surround speakers have holes for wall mounting. However, if you are using the Front Surround setup described on the previous page, do not wall mount the surround speakers. Attaching the brackets • Make sure...

Connecting up 02 9 En English Chapter 2 Connecting up Basic connections Important • When connecting this system or changing connections, be sure to switch power off and disconnect the power cord from the wall socket.After completing all connections, connect the power cord to the wall socket. VIDEO I...

Connecting up 02 11 En English • Connect the other end to the color-coded speaker terminals on the rear of the receiver subwoofer. Make sure to insert completely. The small lug at the wire-end of the speaker plug should face up or down depending on whether it’s being plugged into one of the upper or...

Connecting up 02 12 En Using this system for TV audio If your TV has a stereo audio output you can connect it to this system and enjoy surround TV sound. 1 Connect the AUDIO OUTPUT jacks on your TV to the ANALOG AUDIO INPUT jacks on the receiver subwoofer. Use the red/white stereo audio cable (not s...

Controls and displays 03 13 En English Chapter 3 Controls and displays Display unit 1 STANDBY/ON Press to switch the system on/into standby. 2 IR remote sensor (page 15) 3 Front panel display See below for details. 4 Indicator Lights blue when the power is on (except when the dimmer/sleep timer is a...

Controls and displays 03 15 En English Using the remote control Please keep in mind the following when using the remote control: • Make sure that there are no obstacles between the remote and the remote sensor on the unit. • Remote operation may become unreliable if strong sunlight or fluorescent li...

Getting started 04 16 En Chapter 4 Getting started System demo setting Switches the automatic demo feature on or off (this starts when you plug in for the first time). 1 Switch the system into standby. 2 Press SETUP. 3 Use the / (cursor left/right) buttons to select DEMO from the menu, then press EN...

Listening to your system 05 18 En Chapter 5 Listening to your system Auto listening mode The Auto listening mode is the simplest way to listen to any source as it was mastered: the output from the speakers mirrors the channels in the source material. If you set up the system for Front surround (page...

Listening to your system 05 19 En English Using Front Surround The Front Surround modes are effective when you are using the Front surround speaker setup as described on page 7. The surround speakers should be placed on top of the front speakers and oriented either towards the walls, or straight ahe...

Listening to your system 05 20 En Using the Sound Retriever When audio data is removed during the MP3 or WMA compression process, sound quality often suffers from an uneven sound image. The Sound Retriever feature employs new DSP technology that helps bring CD quality sound back to compressed 2-chan...

Listening to your system 05 21 En English Boosting the bass level There are two bass modes you can use to enhance the bass in a source. 1 Press SOUND . 2 Use the / (cursor left/right) buttons to select BASSMODE then press ENTER . 3 Use the / (cursor up/down) buttons to select the sound then press EN...

Listening to the radio 06 22 En Chapter 6 Listening to the radio Listening to the radio The tuner can receive both FM and AM broadcasts, and lets you memorize your favorite stations so you don’t have to manually tune in every time you want to listen. 1 Press TUNER to switch to the tuner, then press ...

Listening to the radio 06 23 En English Using RDS Radio Data System (RDS) is a system used by most FM radio stations to provide listeners with various kinds of information—the name of the station and the kind of show they’re broadcasting, for example. One feature of RDS is that you can search by typ...

Surround sound settings 07 24 En Chapter 7 Surround sound settings Using the Setup menu From the Setup menu you can access all the surround sound settings of the system 1 , including channel levels, speaker distances, dynamic range adjustment and dual mono audio playback. Use the following buttons t...

Surround sound settings 07 25 En English • DRC OFF (default) – No dynamic range adjustment (use when listening at higher volume) • DRC MID – Mid setting • DRC HIGH – Dynamic range is reduced (loud sounds are reduced in volume while quieter sounds are increased) 4 Press ENTER to exit. Dual mono setti...

Other connections 08 26 En Chapter 8 Other connections Important • When connecting this system or changing connections, be sure to switch power off and disconnect the power cord from the wall socket.After completing all connections, connect the power cord to the wall socket. Connecting auxiliary com...

Other connections 08 27 En English Using this unit with a Pioneer plasma display If you have a Pioneer plasma display 1 , you can use an SR+ cable 2 to connect it to this unit and take advantage of various convenient features, such as controlling this unit via the plasma display’s remote sensor, aut...

Other connections 08 28 En Automatic plasma display input switching In order that the plasma display can switch automatically to the correct input when you switch the input function of the receiver subwoofer, you need to tell it how your system is connected. For example, if you connected your DVD re...

Additional information 09 29 En English Chapter 9 Additional information Setting the sleep timer The sleep timer switches off the receiver subwoofer after a specified time so you can fall asleep without worrying about it. 1 1 Press the SLEEP button to select an option. Choose between the following o...

Additional information 09 30 En Use in an excessively dusty or damp environment. Place directly on top of an amplifier, or other component in your stereo system that becomes hot in use. Use near a television or monitor as you may experience interference—especially if the television uses an indoor an...

Additional information 09 31 En English Using the TV remote control buttons The table below shows how to use this remote control with your TV. Preset code list Please note that there are cases where only certain functions may be controllable after assigning the proper preset code, or the codes for t...

Additional information 09 32 En Troubleshooting Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components and elect...

Additional information 09 33 En English Tuner Error Messages Problem Remedy Considerable noise in radio broadcasts. • Connect the AM antenna (refer to the Connecting up) and adjust the direction and position for best reception. You may also connect an additional internal or external AM antenna (refe...

Additional information 09 34 En Specifications SX-X360 Audio Multi-channel Receiver Subwoofer • Amplifier section RMS Power Output:Front, Center, Surround .........................100 W per channel (1 kHz, 10 % T.H.D., 4 Ω ) Subwoofer ....................... 100 W (100 Hz, 10 % T.H.D., 4 Ω ) • FM tu...

<06C00001> <ARB7364-A> PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R OP2,...