Pioneer PRO-111FD - Manuals

7 En 01 Introduction to the ELITE Series Flat Panel TVs Silver Screws (4) (4×10 mm) Falling Prevention Metal Fittings (2) Black Screws (4) (M6×20 mm) Light-Blocking Shield Screws to Metal Fittings (4) (M4×35 mm) Speaker accessories Speaker Cables (2) Speaker Brackets Speaker Mounting Screws (16) (M5...

8 En 01 Introduction to the ELITE Series Flat Panel TVs 1.2 Control Options: Get to Know Your Flat Panel TV You can operate your flat panel TV from the panel buttons or with the remote control. The following sections provide button locations/operations for the panel and the remote control. 1.2.1 Con...

9 En 01 Introduction to the ELITE Series Flat Panel TVs Terminals on side and rear panels are common to both ELITE models. Back of the Panel 1 - ANT terminal2 - PC Input terminal (Analog RGB) 3 - Color sensor terminal4 - AC In terminal 5 - Ethernet cable port 6 - INPUT 4 terminal (HDMI)7 - INPUT 5 t...

10 En 01 Introduction to the ELITE Series Flat Panel TVs 1.2.2 Operating the Remote Control The remote control for the ELITE Series panels is a powerful tool. This section provides a brief introduction to your remote control while later sections explore more advanced operations. Insert the Batteries...

11 En 01 Introduction to the ELITE Series Flat Panel TVs Operating Range for the Remote Control To control the flat panel TV, point the remote towards the sensor on the panel’s bottom right corner. For easy operation, keep the distance between the remote control and the sensor less than 7 m (23 feet...

12 En 01 Introduction to the ELITE Series Flat Panel TVs 1.2.3 Buttons on the Remote Control Except for a few options, commands available through the buttons on the flat panel TV are duplicated on the remote control. The remote control can be programmed to control other equipment such as a DVD Playe...

13 En 01 Introduction to the ELITE Series Flat Panel TVs Remote: Right side buttons (top to bottom, left to right) 16 : Lights up all buttons Lights turn off if no operations are performed within five seconds. This is used for remote control use in dark locations. 17 TV/DTV: Select analog or digital...

14 En 02 Install Your Flat Panel TV 2 Install Your Flat Panel TV There are several installation options for your flat panel TV. This chapter walks you through how to choose an installation site, the best mounting methods, and how to install your panel. 2.1 Choose a Location and the Mounting Method Y...

16 En 02 Install Your Flat Panel TV 2.2 Install the Panel Using a Stand 2.2.1 Use or Remove the Included Stand The PRO-111FD ships with the Pioneer table top stand (stand) attached. Attach the included stand to the panel for the PRO-151FD. For PRO-111FD, attach the falling prevention metal fittings ...

17 En 02 Install Your Flat Panel TV 7 ) After assembling the stand, attach the falling prevention metal fittings using the installation screws. 8 ) With the flat panel TV still face down, insert the stand’s supports into the bottom of the panel then tighten the screws. 9 ) With the assistance of at ...

18 En 02 Install Your Flat Panel TV Attach the Light-Blocking Shield Note: Attach the light-blocking shield after anchoring the base cover on a flat stable place. Peel off one side of the double-stick tape on the light-blocking shield and attach the shield onto the base cover. Note: Be careful that ...

19 En 02 Install Your Flat Panel TV Attach/Detach the Speaker The flat panel TV’s speaker delivers high-quality, clear sound. Although other devices can be added or removed from the mounted panel, physically attach the speaker last. Disconnect the cables from the Speaker and REMOVE THE SPEAKER befor...

21 En 02 Install Your Flat Panel TV 3 ) Hang the speaker bracket on the screw at the top by passing the wide part over it and lowering into the slot; screw in the lower screw temporarily. After passing the wide part of the hole of the speaker bracket (top) over the screw, lower the speaker onto it. ...

22 En 02 Install Your Flat Panel TV 8 ) Insert the cable in the groove on the speaker. 9 ) Connect the other end of the speaker cables to the rear of the panel. Refer to “ 2.2.2 Connect the Speaker Cables.” Note: If the speaker needs to be repositioned (horizontally or vertically) after it is attach...

23 En 02 Install Your Flat Panel TV 2.3 Wall/Ceiling Mounting Lay the 50” panel down on a raised surface then remove the stand. Speaker cable PRO-151FD with the speaker installed Black Black  Red  Gray Cable clamp (PRO-111FD) Cable clamp • Before connecting the speakers to the flat panel TV, unplu...

24 En 02 Install Your Flat Panel TV A common flat panel TV mounting option is to hang the panel on a sturdy wall or from a reinforced ceiling. When mounting in this way, some preparations must be completed first. Follow the steps below to prepare the panel for mounting. 1 ) Attach the speaker bracke...

25 En 02 Install Your Flat Panel TV To stabilize the flat panel TV on a table or platform, use the supplied metal fittings and screws as well as commercially available wood screws. The wood screws are to anchor the metal fittings when mounting on a wooden surface. These screws should have a nominal ...

26 En 02 Install Your Flat Panel TV 2.5 Attach the Color Sensor When attached to your panel, the color sensor analyses the brightness of the environment to automatically optimize the picture quality according to the viewing condition. To activate this function, select OPTIMUM on the AV Selection men...

27 En 02 Install Your Flat Panel TV Attach the Color Sensor to the Rear Panel Methods of attaching the color sensor to the rear panel differ depending on the panel with or without side-mounted speakers. (when side-mounted speakers are installed) 1 ) Remove the screws of the color sensor then replace...

28 En 02 Install Your Flat Panel TV (when side-mounted speakers are not installed) 1 ) Remove the screws of the color sensor then replace the bracket. Use the removed screws again. 2 ) Finger tighten the supplied color sensor screws in the speaker screw holes. 3 ) Fit the color sensor bracket’s lowe...

29 En 02 Install Your Flat Panel TV 2.6 Connect to Broadcast TV & Other Devices (DVR, Receiver, BDR, etc.) The type of equipment attached to your flat panel TV determines which panel ports are used. The following sections explain how to connect broadcast TV and playback equipment such as a DVD p...

30 En 02 Install Your Flat Panel TV Connect HDMI equipment (INPUT 4 through INPUT 6): Connect HDMI equipment (INPUT 7): Connect a DVD player: Connect an AV receiver: T W T W T W T W HDMI equipment HDMI compliant cable (HDMI cable having the HDMI mark) Rear view INPUT 4 through INPUT 6 are HDMI termi...

31 En 02 Install Your Flat Panel TV Connect a VCR: Connect a game console or camcorder: Connect control cords: Connect a PC: T W T W Use INPUT 1 terminals when connecting a VCR or other equipment. For details, refer to the operation manual that came with the VCR. VCR S-Video cable (commercially avai...

32 En 02 Install Your Flat Panel TV 2.6.3 Connect the Power Cord to the Panel The final connection is the power cord. Always connect the panel’s power cord to a three-pronged outlet, verifying that the cord is properly grounded. The cord includes a noise filter that reduces electrical interference f...

33 En 02 Install Your Flat Panel TV Follow the steps below to attach a cable clamp. 1 ) Thread the clamp band through the holder and bundle the cable(s) in the cable clamp. 2 ) Push and hold the levers then insert the hook into an appropriate hole on the rear of the flat panel TV. 3 ) Pull up the cl...

34 En 03 Basic Operations For Television Viewing 3 Basic Operations For Television Viewing This chapter explores day-to-day operations such as powering on your flat panel TV, using the Home Menu, and adjusting the panel for the viewing area/room. The final section in this chapter provides hints and ...

35 En Basic Operations For Television Viewing 03 3.2 Program the Flat Panel TV for Television Viewing To watch TV and take advantage of some built-in features, choose the channel type or types (Analog, Digital), select a language, set your time zone, and program the channels. The sections below incl...

37 En Basic Operations For Television Viewing 03 TV Screen Components Your flat panel TV has easy-to-read menus and graphic symbols that provide quick access to the desired options. Menus appearing in this manual may differ slightly from the actual menus but the functionality remains the same. 3.2.3...

39 En Basic Operations For Television Viewing 03 5 ) Select Start. The panel automatically begins creating your list of channels. Note: To quit Auto Installation before it is complete, press RETURN to recall the Auto Installation screen then EXIT . Manual Channel Selection To add channels without us...

40 En 03 Basic Operations For Television Viewing 3 ) Select Installation from the Digital Tuner Setup menu. 4 ) Select Add New Channels . Channel search starts automatically. If a new channel is found, it is stored automatically in the flat panel TV.To cancel channel search before it finishes, press...

41 En Basic Operations For Television Viewing 03 9 ) Select OK then press ENTER . The entry is complete. 10 ) Press HOME MENU to exit the menu. 3.2.6 Skip or Delete Unwanted Channels The Auto Installation process adds all channels available from your TV service provider. However, there may be some c...

42 En 03 Basic Operations For Television Viewing 3.2.7 Channel List Your flat panel TV offers three channel lists for quick access to a desired channel: Favorites List, Channel List and Input List. Favorites List: Display your favorite channel numbers/names up to 20 channels (analog channels, Input ...

43 En Basic Operations For Television Viewing 03 4 ) Select a TV channel to store. If the screen fails to fit in the window, a scroll bar appears.Pressing ENTER while watching a TV program also causes the favorite channel list to appear. If the Favorites list is empty, “No Favorites List.” appears. ...

44 En 03 Basic Operations For Television Viewing 3.3 Quick Start for Watching Television Your flat panel TV has many functions and features, some of which you may simply lack the time to set when first installing the panel. To begin watching TV quickly, refer to the basic information within this sec...

45 En Basic Operations For Television Viewing 03 The SLEEP indicator on the front of the flat panel TV lights orange when the Sleep Timer is set. To check the remaining time, press TOOLS then select Sleep. “Remain ---min” appears at the top of the menu screen. After checking the time, press EXIT to ...

46 En 03 Basic Operations For Television Viewing Blue LED Dimmer Adjust the brightness of the POWER ON indicator depending on the brightness level of the viewing area. Setting to Auto toggles the brightness of the indicator between High, Mid and Low to match the brightness level of the viewing area....

47 En Basic Operations For Television Viewing 03 Picture Image Position Each input source stores the picture adjustment settings for that view. Although repositioning is available in most screen views, when the screen is set to Dot-by-Dot, the Position menu is unavailable. Also, depending on the dis...

48 En 03 Basic Operations For Television Viewing Follow the steps below to adjust options for the preferred picture quality. 1 ) Access the Picture through the Setup. 2 ) Select an option. 3 ) Use the TOOLS button to toggle between the previous and adjusted images. 4 ) Repeat Steps 2 and 3 to contin...

49 En Basic Operations For Television Viewing 03 3.4.5 Sound Control Setting the Sound Control option to On automatically adjusts to the highest sound quality possible for the selected image and viewing environment. This option is also available when OPTIMUM is selected in the AV Selection menu. To ...

50 En 03 Basic Operations For Television Viewing 3.5 Block Programs, Channels, or Content Although blocking programs, channels, or content is optional, some images may be inappropriate for all family members. Your flat panel TV supports a blocking function known as Parental Control. With Parental Co...

51 En Basic Operations For Television Viewing 03 3.5.2 Activate Parental Control The Parental Control function must be active for the panel to block content. If this option is turned Off, blocked programs appear on screen. To activate Parental Control blocking, follow the steps below. 1 ) Access the...

54 En 03 Basic Operations For Television Viewing Delete a New Ratings System If an added ratings system is no longer needed, delete the ratings system from your flat panel TV. It is unnecessary to remove blocks from individual channels or programs. Deleting the ratings line removes any/all blocks in...

55 En Basic Operations For Television Viewing 03 3.6 Smart Starts for New Owners Many of the flat panel TV features make it easy to use but also environmentally friendlier. This section explains how to extend the life of your panel while being energy efficient. We suggest applying all of the followi...

56 En 03 Basic Operations For Television Viewing 3.6.3 Turn On the Image Orbiter A built-in feature to protect against burn-in is the Orbiter function. Orbiter automatically changes the position of the picture imperceptibly while the image is on screen. To activate the Orbiter, follow the steps belo...

57 En 04 Additional Picture and Sound Adjustment Options 4 Additional Picture and Sound Adjustment Options To take advantage of all that your flat panel TV offers, browse this chapter for features and functions that enhance your viewing experience. Most sections deal with adjusting the picture and a...

58 En 04 Additional Picture and Sound Adjustment Options 4.1.2 Choose an AV Source through the Home Menu The other method for choosing an AV Selection uses the Home Menu. Follow the directions below to set an AV Selection for an external AV Source. The AV Selection, OPTIMUM, automatically adjusts to...

59 En 04 Additional Picture and Sound Adjustment Options 4.1.4 Set the Panel to Recognize a Game Console When adding a game console to your flat panel TV, use the Game function to establish a preference for image quality or for operability. To have the panel store your Game preference, follow the st...

60 En 04 Additional Picture and Sound Adjustment Options Manual Screen Sizing Manually select an appropriate screen size if an image fails to appear in the correct format. Browse the menu for the correct screen size for a specific program. The selectable screen sizes differ depending on the types of...

61 En 04 Additional Picture and Sound Adjustment Options 4.2.2 Correct the Picture for an AV or PC Source Although picture adjustments are to your personal preferences, often the source causes unanticipated image changes. Your flat panel TV offers several adjustment options. AV Source PC Source To c...

62 En 04 Additional Picture and Sound Adjustment Options 4.3 Assign Advanced Picture Functions Your flat panel TV provides various advanced functions for optimizing the picture quality that go beyond the basic adjustments explained earlier in this manual. This section explores the value offered thro...

63 En 04 Additional Picture and Sound Adjustment Options Lighten Side Masks If content appears with bars (side masks) on each side of a picture when the screen size is 4:3 and Side Mask Detection is set to Mode 1 or Mode 2, the bars automatically change from black to gray. However, the gray is fairl...

67 En 04 Additional Picture and Sound Adjustment Options 5 ) Select the desired parameter. 6 ) Select the desired level. To adjust another item, press RETURN then repeat Steps 5 and 6. 7 ) Press HOME MENU to exit the menu. 4.3.8 Reduce Noise from the Image Use the video noise reduction features for ...

69 En 04 Additional Picture and Sound Adjustment Options 4.4 View in Multi-Screen The flat panel TV can show multiple screens at the same time; two-screen or picture-in-picture. The pictures may be reversed (in 2-screen and P-in-P) or moved to various locations on the screen (P-in-P). 4.4.1 Split/Sw...

70 En 04 Additional Picture and Sound Adjustment Options The multi-screen function is unavailable when viewing source from a single input or from two external input sources. To return to a single picture, press EXIT . Another option is to select a multi-screen mode from the TOOLS Menu. To select a m...

71 En 04 Additional Picture and Sound Adjustment Options 4.6 Use the Banner Feature InfoBanner InfoBanner (additional) A separate banner also appears at the bottom of the screen showing the AV Selection mode (bottom left) and screen size (bottom right). The above information is only appears if it is...

73 En 04 Additional Picture and Sound Adjustment Options Closed Caption for Digital Programs There are six different closed caption options for digital programming, called Service levels. The Primary Caption Service is on Service 1 and the Secondary Language Service is on Service 2. More information...

74 En 04 Additional Picture and Sound Adjustment Options 4.7.2 Switch Languages Using MTS Multi-channel Television Sound (MTS) allows switching the audible language if it is available for that program. Available languages differ depending on the current broadcast. When watching a digital TV program ...

77 En 04 Additional Picture and Sound Adjustment Options PC Source -Power Management When receiving signals from a PC, the panel can automatically enter Standby if the signal fails. Follow the steps below to activate this function. 1 ) Access the Power Control through the Setup . 2 ) Select Power Ma...

78 En 05 Use Other Equipment With Your Flat Panel TV 5 Use Other Equipment With Your Flat Panel TV Although earlier sections have mentioned other equipment for playing back video, this section provides control and operation information for specific types of equipment. 5.1 Program the Remote Control ...

79 En Use Other Equipment With Your Flat Panel TV 05 To delete a learned code, overwrite it with a new code on the same button or follow the directions below. 1 ) Concurrently press EDIT/LEARN and 2 . The selected mode indicator flashes when the remote control is ready to be learned. 2 ) Press and h...

80 En 05 Use Other Equipment With Your Flat Panel TV 5.1.4 Clear Added Manufacturer Codes from the Remote Control To return all learned and preset codes to the defaults (PIONEER), follow the steps below. To exit before the reset is complete, press the EDIT button again. The reset is cancelled if no ...

81 En Use Other Equipment With Your Flat Panel TV 05 5.1.6 Control a Cable (CBL) or Satellite (SAT) System When Mode is set to CBL/SAT, a cable converter uses the buttons 1 , 6 , 7 , 8 , and 9 while satellite tuners use the buttons 1 to 8 . However, the panel only recognizes a single system (cable o...

84 En 05 Use Other Equipment With Your Flat Panel TV 5.2 Use HDMI Inputs High Definition Multimedia Interface (HDMI) is a communication method commonly used by digital and/or high definition equipment. Your flat panel TV’s INPUT 4, INPUT 5, INPUT 6, INPUT 7 are HDMI terminals for incoming digital vi...

86 En 05 Use Other Equipment With Your Flat Panel TV If there is no sound, specify another audio signal type. Depending on the type of equipment, sound output may require analog audio cables in addition to the HDMI connection(s). Note: When signals come through the HDMI terminals, no signals are out...

87 En Use Other Equipment With Your Flat Panel TV 05 To access the menu, follow the steps below. 1 ) Press HOME MENU . 2 ) Select HDMI Control from the main menu. Use the arrow buttons to highlight an option then press ENTER . Note: Pressing HDMI CTRL on the remote also causes the HDMI Control menu ...

88 En 05 Use Other Equipment With Your Flat Panel TV 3 ) Confirm that the other equipment is set for HDMI Control. 4 ) Check that the audio and video are playing back properly from the equipment connected to the HDMI terminal(s). 5 ) Turn Off the flat panel TV. 6 ) Pause for a few seconds before tur...

89 En Use Other Equipment With Your Flat Panel TV 05 During playback, use the remote control’s up/down arrows ( / ) to cycle through the surround sound options. Use the left/right arrows ( / ) to change the input. To resume playback, return to the HDMI Control menu then select the function again...

90 En 05 Use Other Equipment With Your Flat Panel TV 5.3.4 Add an AV Amp or a BD Player To add an AV amp and/or a BD Player, refer to the appropriate cabling diagram below. AV Amp & BD Player BD Player only T W T W Rear view HDMI compliant cable (HDMI cable having the HDMI mark) AV cable (commer...

91 En Use Other Equipment With Your Flat Panel TV 05 5.4 Specific HDMI Control Commands When using HDMI equipment with your flat panel TV, some options include when to power the panel and ways to turn other devices or features On and Off. This section provides steps for commonly desirable setting ch...

92 En 05 Use Other Equipment With Your Flat Panel TV 5.4.4 Test the Power Control (On/Off) Your flat panel TV provides an HDMI control option to test equipment power when it is connected to the panel’s HDMI ports and it has been properly assigned to an Input. To confirm that the Power On/Off control...

93 En Use Other Equipment With Your Flat Panel TV 05 5.7 Operate the Home Media Gallery With Home Media Gallery, you can enjoy digital content such as movies, music, and photo files on your high-end flat panel TV. Play content from files stored on one or more media servers connected by a home or loc...

95 En Use Other Equipment With Your Flat Panel TV 05 Connect via an Ethernet Hub If already operating one or more media servers on a home or local area network (LAN), connect the flat panel TV to the Ethernet (LAN) hub using a standard (“straight-through”) Ethernet (LAN) cable. See the diagram below...

96 En 05 Use Other Equipment With Your Flat Panel TV Confirm the IP Address After making the network connection, follow the instructions below to confirm the IP Address before accessing the network. (The setup is effective for Auto only. To perform the procedure, DHCP on your server or router must b...

97 En Use Other Equipment With Your Flat Panel TV 05 Note: Do not use any USB devices other than those specified. Using other devices can cause a malfunction. Readable Data Format This system reads FAT16, FAT32 or NTFS. Readable Data Files Movie, music, and photo files play with the exception of Dig...

98 En 05 Use Other Equipment With Your Flat Panel TV 5.8 Run the Home Media Gallery 1 ) Press HMG . The Home Media Gallery menu appears on screen. 2 ) Select Media Navigator, USB, HMG Playlist or HMG Setup . Use the arrow buttons to highlight an option then press ENTER . To return to the previous sc...

99 En Use Other Equipment With Your Flat Panel TV 05 Navigate through a USB Device’s Files and Folders Like navigating through media servers, select the specific file from a device on the USB Device screen to start an appropriate player. For details, follow the steps below. 1 ) Press HMG . The Home ...

100 En 05 Use Other Equipment With Your Flat Panel TV Screen Components Screen display options are: • List • Thumbnail • Thumbnail List Press TOOLS then select Change View from the TOOLS Menu to choose from the screen display options. The options are available for Movie, Music and Photo menus. 1. It...

101 En Use Other Equipment With Your Flat Panel TV 05 HMG Playlist Each category (Movie, Music, and Photo) has five different Playlists with up to 100 files each. The HMG Playlist can contain sound and image files selected in “Media Navigator ”. To edit a Playlist, use the TOOLS Menu. 1 ) Press HMG ...

102 En 05 Use Other Equipment With Your Flat Panel TV Movie Player key guide Note: Some functions may not be supported depending on the server type or software version. During playback, an error may arise in time-related information, depending on the content or server software.Also, some functions m...

103 En Use Other Equipment With Your Flat Panel TV 05 Content obtained from a digital video camera that supports H.264/AVC format can be played through the USB port. To play content from this type of camera, follow the steps below. 1 ) Insert the USB flash drive containing the content into a card re...

104 En 05 Use Other Equipment With Your Flat Panel TV Music Player key guide Note: Files may not play properly, depending on the content. Some functions may not be supported, depending on the server type or software version.Playback continues. Pressing RETURN to move from the Player screen to the pr...

105 En Use Other Equipment With Your Flat Panel TV 05 Photo Player key guide Note: Some functions may not be supported, depending on the server type or software version. Even files in the supported format may fail to play properly, depending on the content. Mode Key(s) used Function Playback ENTER, ...

106 En 05 Use Other Equipment With Your Flat Panel TV 5.9 Use the TOOLS Menu Pressing TOOLS on the remote control causes the TOOLS Menu to appear. Select various play and display modes from this menu. The selectable menu items differ, depending on the current menu (refer to “3.6.1 Use the TOOLS Menu...

107 En Use Other Equipment With Your Flat Panel TV 05 Favorites Entry Registering the Home Media Gallery in Favorites (TOOLS Menu) provides quick access to the Home Media Gallery top screen while watching TV or other programs. This option is available on the Home Media Gallery screen. 1 ) Press TOOL...

108 En 05 Use Other Equipment With Your Flat Panel TV • Order: Bottom-Up or Top-Down 5 ) Select Start on the Sort dialog screen. The sorting starts based on your selection and sort results are displayed. While sorting continues, content playback is available. To return to the sort screen, press RETU...

109 En Use Other Equipment With Your Flat Panel TV 05 Slide Show A slideshow is simply a series of still pictures, appearing one after the other, usually in a timed procession. Select the desired photo file to display a still picture then press ENTER to start a slideshow. After a slideshow launches,...

110 En 05 Use Other Equipment With Your Flat Panel TV Add to HMG Playlist The Home Media Gallery function provides “HMG Playlist” – a self-contained play list that allows bookmarking favorite movie, music, and photo files from the network. You can store, edit, and sort up to 100 files in each Playli...

111 En Use Other Equipment With Your Flat Panel TV 05 Play Mode Your flat panel TV provides four repeat modes when using the Movie Player, Music Player, or Photo Player. Choose a playback mode (Repeat, Single, etc.) when playing multiple content files. To activate Play Mode, follow the steps below. ...

112 En 05 Use Other Equipment With Your Flat Panel TV Change View Select this option to cycle between the different views: List, Thumbnail, and Thumbnail List. This option is available on the Playlist List (Movie/Music/Photo), and Folder/Contents List screens. 1 ) Press TOOLS . The TOOLS Menu appear...

113 En Use Other Equipment With Your Flat Panel TV 05 Picture The Picture option is another way to adjust the image quality. This option is available on the Movie Player and Photo Player screens. To adjust the picture, follow the steps below. 1 ) Press TOOLS . The TOOLS Menu appears on screen. 2 ) S...

114 En 05 Use Other Equipment With Your Flat Panel TV Audio Use this option to switch to another audio source if the currently played content has multiple audio sources (multi-language content, for example). This option is available on the Movie Player screen. To reveal multiple audio tracks, follow...

117 En Use Other Equipment With Your Flat Panel TV 05 Zoom Use the Zoom option to enlarge the photo content displayed. This option is available on the Photo Player screen. To enlarge content, follow the steps below. 1 ) While photo content appears, press TOOLS . The TOOLS Menu appears on screen. 2 )...

119 En Use Other Equipment With Your Flat Panel TV 05 Auto Connection Set Auto Connection to automatically connect to the last accessed server. For selection, follow the steps below. 1 ) Access the Auto Connection through the HMG Setup . 2 ) Use  or  to change the setting. Selecting ON causes the ...

120 En 05 Use Other Equipment With Your Flat Panel TV Dialog Screen Message Important • Displaying pictures in the Home Media Gallery for an extended period may cause an after-image. No. Message Problem 001 Content cannot be played. (001) No details are available for the error, please check content ...

121 En Use Other Equipment With Your Flat Panel TV 05 5.12 Add Other Audio Equipment The flat panel TV’s digital audio output terminal (optical) can output Dolby Digital signals. Using an optical digital cable, connect an AV receiver to the digital audio output terminal (optical) on the rear of the ...

122 En 05 Use Other Equipment With Your Flat Panel TV 5.13 Add a Computer (PC) Use the panel’s PC terminals to connect a personal computer. The PC input terminals are DDC2B-compatible; however, the Plug & Play function may not operate properly. When connected to a PC, the panel automatically ide...

123 En Helpful Information 06 6 Helpful Information This chapter includes answers to some common questions and provides information about software/hardware used in your flat panel TV, cleaning methods, and troubleshooting/service information. If you need further assistance, please contact us and giv...

124 En 06 Helpful Information Why is the picture cropped when I feed a PC signal through the PRO-151FD/111FD’s HDMI input? If you select Video for Signal Type in the HDMI Input menu, the image is over-scanned (enlarged) but the panel automatically switches to PC when receiving computer signals. Refe...

125 En Helpful Information 06 6.4 Troubleshooting & Service Information General Issue Possible Solutions No power • Check the connection seating at the wall and panel. • See if the panel’s Power On button is turned ON. • Confirm that the remote is set to TV. If the panel indicator lights red, pr...

126 En 06 Helpful Information Picture but no sound • Confirm that the sound is not muted or that the volume is turned down. • When using a video or PC input source, check that the audio terminals are connected. Sound but no picture • Check if Picture Off is selected from the TOOLS Menu. With this op...

127 En Helpful Information 06 Home Media Gallery/NETWORK Issue Possible Solutions No servers are found No previously connected server(s) found (items in Select Servers are dimmed) “Failed to acquire a list.” appears on the Server List screen • Confirm that the PC is On and not in Standby or Sleep (n...

128 En 06 Helpful Information Home Media Gallery/PLAYBACK Issue Possible Solutions Image or sound is interrupted or distorted (Block noise appears) • Check the physical connections (hub, router, cable quality). Please use 100BASE-TX for best quality playback and display speed. • Check if the PC is o...

129 En Helpful Information 06 Image or sound is interrupted or distorted (Block noise appears) • Verify that the file complies with the supported format, bit rate and/or profile. Also check the file for damage. • Some files that comply with the supported format may not play back or display properly....

131 En Cautions and Warnings 07 7 Cautions and Warnings Your flat panel TV is designed for a long and productive life. To keep your panel at peak performance, there are a few things that can help. This section provides general information and specific warnings to help you maintain the flat panel TV ...

132 En 07 Cautions and Warnings • View full-motion, high-action video in WIDE or FULL screen after playing a game or showing a still/PC image. The recommended duration for showing the action video is three times as long as the game or PC image was on the screen. • View full-motion video in WIDE or F...

133 En Cautions and Warnings 07 In rare cases, some pixels can be permanently switched off, or on, resulting in either a black or colored pixel permanently fixed on the screen. This effect is common to all plasma displays because it is a consequence of the technology. If the defective pixels are vis...

134 En 07 Cautions and Warnings 7.7 Safety Precautions Your flat panel TV is engineered and manufactured with one of the highest priorities being safety. However, improper use can result in electric shock and/or fire. To avoid danger please follow the instructions below when installing, operating, a...

135 En Cautions and Warnings 07 7.8.2 Radio Interference CAUTION: The  switch on this unit will not completely shut off all power from the AC outlet. Since the power cord serves as the main disconnect device for the unit, you will need to unplug it from the AC outlet to shut down all power. Therefo...

136 En 08 Appendix 8 Appendix 8.1 Ratings Charts (for Various Audience Classifications) The charts below list the various rating systems recognized by your flat panel TV. 8.1.1 TV Ratings (age-based) 8.1.2 U.S. TV Parental Guideline Ratings (age/category-based) 8.1.3 MPAA Movie Ratings (age-based) R...

137 En 08 Appendix 8.1.4 Canadian - English Ratings (age-based) 8.1.5 Canadian - French Ratings (age-based) Rating Description E(exempt) News, sports, documentaries, other information programming, talk shows, music videos, variety programming C(children) For younger children under the age of eight y...

138 En 08 Appendix 8.2 Manufacturer Codes to Program into the Remote Control 8.2.1 Cable 8.2.2 Satellite Brand/Code Brand/Code Brand/Code Brand/Code Brand/Code Brand/Code A-Mark0008,0144ABC0237, 0003, 0008Accuphase0003Acorn0237Action0237Active0237Americast0899Archer0237, 0260BCC0276Bell South0899Bri...

145 En 08 Appendix 8.3 Specifications Flat Panel TV PRO-151FD (60”) PRO-111FD (50”) Number of pixels 1920 × 1080 pixels 1920 × 1080 pixels Audio Amplifier 18 W + 18 W (1 kHz, 10 %, 6 Ω ) 18 W + 18 W (1 kHz, 10 %, 6 Ω ) Speaker Woofer: 4.8 cm x 13 cm cone type Tweeter: 2.5 cm semidome type Woofer: 4....

146 En 08 Appendix * conforms to HDMI1.3 (Deep Color) and HDCP1.1 ** conforms to USB 1.1 and 2.0 HDMI (High-Definition Multimedia Interface) is a digital interface that handles both video and audio using a single cable. HDCP (High-bandwidth Digital Content Protection) is a technology used to protect...

147 En 08 Appendix License [MPEG4IP] This software is based in part on Mozilla Public License 1.1 see http://www.mozilla.org/MPL/ for information. [OpenSSL] OpenSSL License Copyright © 1998-2007 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or with...

148 En 08 Appendix 1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or o...

151 En 08 Appendix [TinyLogin] This software is Copyright 1988 - 1994, Julianne Frances Haugh. All rights reserved. [portmap] Copyright © Sun Microsystems, Inc. Sun RPC is a product of Sun Microsystems, Inc. and is provided for unrestricted use provided that this legend is included on all tape media...

152 En 08 Appendix HEREUNDER IS ON AN “AS IS” BASIS, AND THE AUTHOR HAS NO BLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. [GNU GENERAL PUBLIC LICENSE] Version 2, June 1991 Copyright © 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Bos...

154 En 08 Appendix Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically rece...

155 En 08 Appendix SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new ...

157 En 08 Appendix GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distribute...

158 En 08 Appendix ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices.Once this c...

160 En 08 Appendix Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and “any later version”, you have the option of following the terms and conditions either of that version or of any later version published by the F...

164 En 08 Appendix 8.5 Index Numerics 100BASE-TX .......................................................................... 95, 16210BASE-T ...................................................................................... 952-screen .................................................................

165 En Appendix 08 8.6 Trademarks, Licenses, & Patent Information Trademarks is a trademark of SRS Labs, Inc. WOW HD technology is incorporated under license from SRS Labs, Inc.Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories....

<ARB1579-B> Printed in China Published by Pioneer Corporation. Copyright © 2008 Pioneer Corporation. All rights reserved. PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800)...