Pioneer PRO-1000HDI - Manuals

Page 2 - ii; Safety Precautions; IMPORTANT NOTICE; WARNING; Wash hands after handling.

ii PRO-1000HD I / PRO-800HD I Safety Precautions IMPORTANT NOTICE The serial number for this equipment is located on the rearpanel. Please write this serial number on your enclosedwarranty card and keep it in a secure area. This is for yoursecurity. The following symbols are found on labelsattached ...

Page 3 - iii; IMPORTANT SAFETY INSTRUCTIONS

iii PRO-1000HD I / PRO-800HD I Safety Precautions Safety Precautions GROUNDING OR POLARIZATION ÷ I f t h i s p r o d u c t i s e q u i p p e d w i t h a p o l a r i z e dalternating current line plug (a plug having oneblade wider than the other), it will fit into the outletonly one way. This is a sa...

Page 4 - iv; FEDERAL COMMUNICATIONS COMMISSION

iv PRO-1000HD I / PRO-800HD I Safety Precautions iii FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY This device complies with part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) This device may not cause harmful interference, and (2) this devicemust accept...

Page 5 - Before Proceeding; Notes on Installation Work:; Contents

1 PRO-1000HD I / PRO-800HD I Before Proceeding Safety Precautions ................................. i Before Proceeding ................................. 2 How to Use This Manual ......................................... 2Checking Supplied Accessories .............................. 3 Part Names and ...

Page 6 - How to Use This Manual; About operations in this manual; Screen Displays

2 PRO-1000HD I / PRO-800HD I Before Proceeding How to Use This Manual This manual is set up to follow the course of actions andoperations in the order that would seem most logical forsomeone setting up this unit. Once the unit has been taken out of the box, and it hasbeen confirmed that all the part...

Page 7 - Checking Supplied Accessories

3 PRO-1000HD I / PRO-800HD I Before Proceeding Checking Supplied Accessories Check that the following accessories were supplied. 1 Power cord 2 Remote control unit 3 AA (R6) batteries (x 2) 4 Cleaning cloth (for wiping front panel) 5 Speed clamps (x 2) 6 Bead bands (x 2) Before Proceeding ÷ Operatin...

Page 8 - Part Names and Functions; Main Unit; Main unit

4 PRO-1000HD I / PRO-800HD I Part Names and Functions Main Unit Main unit 1 STANDBY/ON indicator This indicator is red during standby mode, and turnsto green when the unit is in the operation mode(page 22).Flashes green when Power-Management function isoperating (page 26).The flashing pattern is als...

Page 9 - Remote Control Unit; When handling the remote control unit; CAUTION

5 PRO-1000HD I / PRO-800HD I Part Names and Functions Remote Control Unit 1 SCREEN SIZE button Press to select the screen size (page 24). 2 INPUT buttons Use to select the input (page 22). 3 MENU button Press to open and close the on-screen menu(pages 18 to 34). 4 ADJUST ( 5 / ∞ / 3 / 2 ) buttons Us...

Page 10 - Connection Panel; Operating range of the remote control unit; Synchronizing signal impedance selector switch

6 PRO-1000HD I / PRO-800HD I Part Names and Functions Connection Panel The connection panel is provided with four video inputterminals and two video output terminals. Audio input andspeaker output terminals are also provided, together witha CONTROL IN/OUT connector for connecting toPIONEER component...

Page 11 - Main power switch; AC INLET

7 PRO-1000HD I / PRO-800HD I Part Names and Functions Part Names and Functions 9 AUDIO INPUT (Stereo mini jack) Use to obtain sound when INPUT1 or INPUT2 isselected.Connect the audio output terminal of componentsconnected to INPUT1 or INPUT2 to this unit (page 15). 0 AUDIO OUTPUT (Stereo mini jack) ...

Page 12 - Installation and Connections; Installation of the Unit

8 PRO-1000HD I / PRO-800HD I Installation and Connections Installation of the Unit 7 Optional line (sold separately) (For details, please consult the dealer where thisunit was purchased.) 1 Table top stand : PRO-1000HD I / PRO-800HD I display stand. 2 Wall installation unit : Wall installation brack...

Page 13 - Connection to INPUT1 and INPUT2; Connection to AV components; When connecting to INPUT1

9 PRO-1000HD I / PRO-800HD I Installation and Connections Installation and Connections Connection to INPUT1 and INPUT2 Various components can be connected to the INPUT1 andINPUT2 terminals. After connections are made, on-screensetup is necessary to match the characteristics of theconnected component...

Page 14 - Connection of G ON SYNC analog RGB source

10 PRO-1000HD I / PRO-800HD I Installation and Connections Connection of G ON SYNC analog RGB source Make G ON SYNC connections for a component withoutput that has the synchronization signal layered on topof the green signal. When connecting to INPUT1 On screen setup is necessary after connection.Pl...

Page 15 - When connecting to INPUT2

11 PRO-1000HD I / PRO-800HD I Installation and Connections Installation and Connections Connection to a personalcomputer Connection method differs depending on the computertype. When connecting, please thoroughly read thecomputer’s instruction manual. Before making connections, be sure to make sure ...

Page 17 - Connection to INPUT4; Connection to INPUT5

13 PRO-1000HD I / PRO-800HD I Installation and Connections Installation and Connections Connection to INPUT4 Connect an AV component that has a video outputterminal to the INPUT4 terminal. Connection to INPUT3 Connect an AV component that has S-video outputterminal to the S-VIDEO input terminal. AV ...

Page 18 - Connecting the speakers; Audio Connections

14 PRO-1000HD I / PRO-800HD I Installation and Connections Connecting the speakers This unit is equipped with a 2W+2W internal amplifier. Ifspeakers are to be connected to the unit, following theaccompanying connection instructions. 10 m m Note When making speaker connections, be sure to match the p...

Page 20 - Power Cord Connection; Connect the power cord to this unit.; Control Cord Connection

16 PRO-1000HD I / PRO-800HD I Power Cord Connection Connect the power cord after all component connectionshave been completed. 1 Connect the power cord to this unit. 2 Plug the power cord into a power outlet. CAUTION ÷ Use only the power cord provided. ÷ Do not use a power supply voltage other than ...

Page 21 - To attach the speed clamps to the main unit; Illustration depicts PRO-1000HD; How to Route Cables

17 PRO-1000HD I / PRO-800HD I Installation and Connections 1 Organize cables together using the providedspeed clamps. Insert 1 into an appropriate hole on the rear of the unit, then snap 2 into the back of 1 to fix the clamp. Speed clamps are designed to be difficult to undoonce in place. Please att...

Page 22 - Setting Up the System

18 PRO-1000HD I / PRO-800HD I Setting Up the System 6 Press 5 / ∞ to select SETTING, then press SET. SELECT ENTER EXIT SET MENU I N P U T L E B L A : V I D E O V I D E O : R G B : A U T O S E T T I N S I GN A L C L A M O F F A U T O P P O WER G : O F F P S I T I O N O D I G I T A L N R : O F F H I G...

Page 23 - CLAMP POSITION setup; Setup of CLAMP POSITION

19 PRO-1000HD I / PRO-800HD I Setting Up the System Setting Up the System CLAMP POSITION setup Depending on the signal, analog RGB signals may resultin the screen image appearing with a whitish or greenishcast. In such cases, set “CLAMP POSITION” to LOCKED. ÷ Normally, leave this setting at AUTO. Se...

Page 24 - VIDEO SIGNAL; SIGNAL RANGE

20 PRO-1000HD I / PRO-800HD I Setting Up the System VIDEO SIGNAL This function allows you to switch the input signal formatto automatic or manual when inputting the digital signal. Note VIDEO SIGNAL setting is possible only when INPUT5 is selected. 1 Press MENU to display the menu screen. The menu s...

Page 25 - AUDIO SELECT

21 PRO-1000HD I / PRO-800HD I Setting Up the System Setting Up the System 3 Press 5 / ∞ to select SIGNAL RANGE. SELECT CHANGE EXIT SET MENU : I N P U T L E B L A O F F A U T O P O WE R : O F F D I G I T A L N R H I G H C O T N R A T S : O F F : L O W C OL O R T M E P : M I D D L E M A I N M E N U I ...

Page 26 - Selecting an Input Source; Operations; INPUT

22 PRO-1000HD I / PRO-800HD I Selecting an Input Source This section explains the basic operation of this unit.Outlined on the following pages is how to turn the mainpower on and off, put this unit in the operation or standbymode and how to select connected components. Before you begin, make sure yo...

Page 27 - To adjust the volume; Press VOLUME on the remote control unit.; VOLUME –; To mute the sound; Press MUTING on the remote control unit.; MUTING; To confirm display settings; Press DISPLAY on the remote control unit.

23 PRO-1000HD I / PRO-800HD I Operations Operations To adjust the volume VOLUME +/– Press VOLUME on the remote control unit. Use VOLUME + or VOLUME – to adjust the volume of the connected speakers. : 5 V O L U ME To mute the sound MUTING Press MUTING on the remote control unit. Press MUTING again to...

Page 28 - Screen Size Selection; Changing the screen size; Press SCREEN SIZE to select the size.; SCREEN SIZE; Automatic screen size; During personal computer signal input; DOT BY DOT; During video signal input; FULL

24 PRO-1000HD I / PRO-800HD I 2 4:3 The display fills the screenas much as possible withoutaltering the aspect ratio ofthe input signal. A Operations Screen Size Selection This unit incorporates screen modes of various height andwidth ratios. For optimal viewing, we recommend thatyou select the scre...

Page 30 - Automatic Power OFF; Press MENU to display the menu screen.; To return to operating mode:

26 PRO-1000HD I / PRO-800HD I 3 OFF ON 2 Automatic Power OFF This display is equipped with automatic power-management and auto-power-off functions, which allowthe unit to automatically switch to power-saving modewhen no sync signal is detected.(A warning message appears onscreen before thesefunction...

Page 31 - Display Panel Adjustments; Adjusting the Picture Quality; To reset PICTURE mode settings to the default

27 PRO-1000HD I / PRO-800HD I Display Panel Adjustments Display Panel Adjustments Adjusting the Picture Quality Note Make these adjustments for each input (INPUT1 to INPUT5) and signals. PICTURE mode adjustment items Below are brief descriptions of the options that can be setin the PICTURE mode. [Wh...

Page 32 - Manual Adjustment of Screen Position and Clock; SCREEN mode adjustment items; Press

28 PRO-1000HD I / PRO-800HD I Display Panel Adjustments Adjusting the Image Position andClock (Automatic Adjustment) Pressing AUTO SET UP on either the main unit operatingpanel or the remote control unit will adjust the screenposition and clock to optimum values. Notes ÷ This adjustment is supported...

Page 33 - To reset SCREEN mode settings to the default

29 PRO-1000HD I / PRO-800HD I Display Panel Adjustments Display Panel Adjustments [When video signal input is selected] SELECT ENTER EXIT SET MENU PICTURE SCREEN SET UP OPTION P O S I T I O N : 0 0 / R S E T E M A I N M E N U I N P U T 1 3 Press 5 / ∞ to select the adjustment item, then press SET. S...

Page 34 - Other Operations

30 PRO-1000HD I / PRO-800HD I Other Operations Rewriting the Input Display(INPUT LABEL) This function allows rewriting of the screen contentsdisplayed with differing inputs. For example, the default“INPUT 1” can be changed to “COMPUTER” or othername describing the connected component (up tomaximum o...

Page 36 - Setting the PureCinema mode

32 PRO-1000HD I / PRO-800HD I Other Operations 3 OFF 3 HQ 3 STANDARD Setting the PureCinema mode When the PureCinema mode is selected, it functionsautomatically to detect video signals of movies recorded at 24frames-per-second, changing the scan settings to allowenjoyment of higher quality movie pla...

Page 37 - Power Control Function

33 PRO-1000HD I / PRO-800HD I Other Operations Other Operations Viewing in a Bright Location(HIGH CONTRAST) When viewing a picture in a bright location, setting thismode to “ON” will enable you to obtain a clear videoimage.• Set this mode to “OFF” when not viewing in a bright location. Note The HIGH...

Page 38 - AUTO FUNCTION

34 PRO-1000HD I / PRO-800HD I Other Operations AUTO FUNCTION This display is equipped with an optional AUTOFUNCTION selector. When enabled, the selectorautomatically switches the display’s input source toINPUT 1 or INPUT 4 when an image signal is detected atthe INPUT 1 jack or the INPUT 4 jack. 1 Pr...

Page 39 - Additional Information; Cleaning; Cleaning the screen; Troubleshooting; About the self diagnosis mode

Additional Information 35 PRO-1000HD I / PRO-800HD I Additional Information Cleaning Regular cleaning will extend the life and performance ofthis unit. The recommended way to clean the display andrelated parts is described below. Before cleaning, be sure to unplug the power cord fromthe power outlet...

Page 40 - General problems; Problems commonly mistaken as breakdown

36 PRO-1000HD I / PRO-800HD I • No power • Unit cannot be operated. • Remote control does not operate. • INPUT is not changed. • Picture is cut off. • Strange color, light color, or dark, or color misalignment • Power is suddenly turned off. • No picture • Is the power cord disconnected? (page 16) •...

Page 41 - Additional cautions

Additional Information 37 PRO-1000HD I / PRO-800HD I Although this unit incorporates high precision technologyin its design, please understand that there may beextremely slight pixel breakup, or light emission fault. Note In order to protect the panel and internal circuitry, this display is provided...

Page 42 - Specifications; Video; Audio; Accessories

38 PRO-1000HD I / PRO-800HD I Specifications General (PRO-1000HD I ) Light emission panel ............ 50 inch plasma display panel Number of pixels .............................................. 1280 x 768 Power supply ........................................... AC 120 V, 60 Hz Rated current .........

Page 43 - Supplement 1

Additional Information 39 PRO-1000HD I / PRO-800HD I 56.4Hz 70.1Hz 60Hz 66.7Hz72.8Hz 75Hz85Hz56Hz 60Hz72Hz75Hz85Hz 74.6Hz 60Hz 60Hz 70Hz75Hz (74.9Hz) 85Hz56Hz 60Hz70Hz Additional Information Supplement 1 Resolution (Dot x Line) Vertical DOT BY DOT FULL Remarks 640x400 640x480 800 x600 832x624 852x48...

Page 45 - Supplement 2; Digital signal compatibilty table (INPUT5)

Additional Information 41 PRO-1000HD I / PRO-800HD I Additional Information Supplement 2 15.625 28.1 31.25 15.734 31.5 33.75 45.0 67.5 Video signal compatibilty table (INPUT1, INPUT2) Vertical F V (Hz) Horizontal F H (kHz) Signal format 4:3 FULL ZOOM WIDE Remarks 50 60 Component RGB Component RGB Co...

Page 46 - Supplement 4; Aspect ratio; Explanation of Terms

42 PRO-1000HD I / PRO-800HD I Additional Information Supplement 4 Signal assignment of INPUT 1 (Mini D-sub 15 pinsocket connector) Input Output 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 R or C R /P R G or Y B or C B /P B NC (No connection) GND GND GND GND DDC + 5V GND NC (No connection) DDC SDA HD or H/V ...

Page 48 - PIONEER CORPORATION

Published by Pioneer Corporation.Copyright © 2003 Pioneer Corporation.All rights reserved. <TSZZF/03I00000> Printed in Japan <ARB1558-B> PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90801-15...