Pioneer PDP 427CMX - Manuals

5 Features Features and Functions of this device PDP-507CMX ¶ Introduces newly developed Wide Plasma Panel The new, wide, high-precision plasma panel (1365x768 /16:9) pushes the envelope of previous high-luminancepanels, producing brighter, clearer images with highercontrast. ¶ ES Slot interface for...

6 Power requirements ............ AC 100 V to 120 V, 50 Hz/60 Hz (The power unit range is from AC100 V to 240 V (50 Hz/60 Hz)) In-rush ............................................................... less than 30 A Power factor .................................................... more than 0.95 Consu...

7 Specifications PDP-427CMX Power requirements ............ AC 100 V to 120 V, 50 Hz/60 Hz (The power unit range is from AC100 V to 240 V (50 Hz/60 Hz)) In-rush ............................................................... less than 30 A Power factor ..................................................

8 640x480 59.9 Hz 31.5 kH z 72.8 Hz 37.9 kH z 75 Hz 37.5 kH z 85 Hz 43.3 kH z 100.4 Hz 51.1 kH z 120.4 Hz 61.3 kH z 720x400 70.1 Hz 31.5 kHz NEC PC-9800 85.1 Hz 37.9 kH z 848x480 60 Hz 31.0 kH z 852x480 60 Hz 31.7 kH z 800x600 56.3 Hz 35.2 kH z 60.3 Hz 37.9 kH z 72.2 Hz 48.1 kH z 75 Hz 46.9 kH z 85....

10 External Dimensions PDP-427CMX WEIGHT: 30.5 kg (67.3 lbs) (without stand) MATERIAL: Front: Resin; Rear cover: Metal plate, Front protector panel: Glass TREATMENT: Front: Paint; Rear cover: Paint (All paints are Pioneer original colors) For packaging information, refer to “3.4.2 Unpacking” (pg. 30...

12 1 5 STANDBY ON STANDBY/ON MENU DISPLAY / SET – VOL + INPUT SCREEN SIZE 7 8 = 9 0 6 3 4 2 - 2.3 Controls and Connectors Controls and Connectors Main unit Operation panel on themain unit Main unit Main unit 1 Display stand (PDP-427CMX only) 2 Remote control sensor Point the remote control toward th...

13 Controls and Connectors Connection Panel (PDP-507CMX) Plasma Display Section 1 SPEAKER (R) terminal For connection of an external right speaker.Connect a speaker that has an impedance of 6 Ω to 16 Ω . 2 SPEAKER (L) terminal For connection of an external left speaker. Connecta speaker that has an ...

14 Controls and Connectors Video Card <PDA-5004> Section The video card provides three video input connectors,one video output connector, and three audio inputconnectors. Consult the pages noted in parentheses ( )for details regarding connections to the various jacksand connectors. ^ S-VIDEO (...

15 S-VIDEO S-VIDEO OUT R L R L R L R L Y Pb/Cb Pr/Cr IN OUT B R VD R L HD (H/V SYNC) G(ON SYNC) I N P U T 3 I N P U T 3 I N P U T 4 I N P U T 5 VIDEO I N P U T 4 INPUT 3/4 ANALOG RGB AUDIO AU D I O AU D I O AU D I O AU D I O COMPONENTVIDEO VIDEO I N P U T 5 IN ~ ^ ! @ * ( # & ) _ % + $ COMBINATI...

17 2.4 Pin layout INPUT1 (Mini D-sub, 15-pin connector; female) pin layout Pin No. Signal 1 NC (not connected) 2 TxD (Transmit Data) 3 RxD (Receive Data) 4 NC (not connected) 5 GND 6 NC (not connected) 7 NC (not connected) 8 RTS (Request To Send) 9 NC (not connected) Pin No. Combination Combination ...

19 2.6 Remote Control Unit Holder (PDP-427CMX only) Peel the sticker covers from the lower and upper mounting tapes on the rear of the remote control holder. Attach it to the back of the main unit or on some other fixed surface so that it will be available for storing the remote control with the pan...

20 3.1 Installation Site Requirements If the site requires modifications or special preparations before installing the Plasma Display or its mounting hardware, obtain permission in advance from the building owner or building authorities. To ensure safety, it is also important to determine the streng...

22 Installation Conditions 3.2 Installation Conditions (PDP-507CMX) 3.2.1 Heat dissipation This unit has openings for effective ventilation. Vent locations are marked by arrows in the illustration below. The arrows show the direction of airflow. To allow proper dissipation of heat from the unit, do ...

23 3.2.2 Calculating heat quantity As a courtesy to our customers, we have included the power formula for calculating air conditioning needs. For power consumption, allow 370 W = 370 VA per unit. Since most of the power consumed is transformed into heat, power consumption may be regarded as roughly ...

24 Installation Conditions This unit is designed to be mounted using four bolt holes. For additional safety, we recommend securing it at four or six points on opposite sides of the horizontal and vertical center lines, as shown in the drawing below. Poor methods for securing Suggested methods for se...

25 Installation Conditions 3.2.4 Mounting surface warping The display incorporates glass. Before mounting the panel using hardware other than that provided by Pioneer, perform the following checks to confirm that the display is free from warps exceeding 1 mm*. Regarding the 1 mm limit: The panel fra...

26 3.3 Installation Conditions (PDP-427CMX) 3.3.1 Heat dissipation This unit has openings for effective ventilation. Vent locations are marked by arrows in the illustration below. The direction of the arrows shows the direction of airflow. To allow proper dissipation of heat from the unit, do not co...

28 [427CMX] Installation Conditions This unit is designed to be mounted using four bolt holes. For additional safety, we recommend securing it at four, six or eight points on opposite sides of the horizontal and vertical center lines, as shown in the drawing below. Methods shown with a large “X” mus...

30 Installation Procedures Ref. No. Terms 3.4 Installation Procedures 3.4.1 Transportation precautions • Once the shipping container is opened, transporting the unit in its packaging should be handled by two or more people. To avoid injury or damage, do not lift the package by its packing bands. • W...

33 3.4.4 Re-packing (re-packing and re-shipping are not covered by the warranty) If the unit needs to be re-packaged, observe the following guidelines. • Refer to the unpacking instructions in section “3.4.2 Unpacking” (pg. 30 to 32). Pack the unit by reversing the unpacking procedure. There is a fr...

34 4) Arranging and securing cables with speed clamps and bead bands Fasten cables using the supplied speed clamps. Once speed clamps are fastened, they are not easily removed. Installation Procedures * As viewed from the rear of the display. 1 2 2. Bunch separated cables together and secure themwit...

35 [507CMX] Special Installation (Mounting to fittings) 3.5 Special Installation (PDP-507CMX) The unit can be hung from or embedded in a wall. However, some installations impose additional limitations onoperating temperatures and other factors.Examine installation methods and the ambient conditions ...

36 [507CMX] Special Installation (Mounting to fittings) 35 mm orless Attach so that the fan is on the left side when viewed from the rear. Example 1 Example 3 Example 4 35 mm or less Example 5 Example 6 35 mm orless Example 7 35 mm or less Vertical installation Standard installation (In cases where ...

37 [507CMX] 3.5.2 Hanging on the wall Carefully read the following imformation before attempting to hang the unit on a wall. Take note of the various limitationsspecified in this section. Mount the unit so that twisting, bending, or any other warping does not exceed 4 mm. Shaded areas indicate attac...

38 [507CMX] Special Installation (Hanging on the wall) Methods of Securing: Basic methods of securing the panel to a wall are shown below. Avoid blocking or covering areas aside from those indicated by . The method indicated by a large “X” must not be used. Before attaching the unit to fittings, dou...

39 [507CMX] Special Installation (Embedding in the wall) A A A X (Front of the unit) <Viewed from Above> <Viewed from the Right Side> ✩ Operating Temperature Restrictions Temperature in space X and Y A: 0 mm to 370 mm 0 °C to 40 °C * The same operating temperature restrictions apply to t...

41 [507CMX] Cation : Due to possible heat issues, we do not recommend installing the panel in narrow, enclosed areas. ✩ Operating Temperature Restrictions • Ambient temperature: 0 °C to 40 °C • The same operating temperature restrictions apply to the speaker system (PDP-S53-LR). ✩ Operating Temperat...

42 [507CMX] Special installation (When the display is put in a box) 3.5.4 When the display is put in a box Operating this display in confined spaces is not recommended. • If the display is to be used in a confined space, observe the following conditions shown in the drawing below: A ≥ 50 B ≥ 50 C ≥ ...

43 [507CMX] Special Installation (Ceiling suspension with wires) When suspending from a ceiling with wire, use the brackets shown below to prevent concentrating loads on the upper two fixing points. For additional safety, secure the wires to separate fittings or parts of the ceiling. Use mounting sc...

44 [507CMX] Special Installation (Ceiling suspension with wires) Methods of Securing: Basic methods of securing are shown below. Avoid blocking or covering areas aside from those indicated by . The methods indicated by a large “X” must not be used. Before attaching the unit to fittings, double-check...

45 [507CMX] Special Installation (Hanging on the wall lengthwise) 3.5.6 Hanging on the wall lengthwise Carefully read the following imformation before attempting to mount the unit on the wall. Observe the various limitations specified below. Be sure to mount the unit so that twisting, bending, or an...

49 [507CMX] Cation : Due to possible heat issues, we do not recommend installing the panel in narrow, enclosed areas. ✩ Operating Temperature Restrictions (*1) • Ambient temperature: 0 °C to 35 °C *1 For this installation, set the ‘FAN CONTROL’ to ‘MAX’ as shown in “5.4.3 Adjustment and Setting in t...

51 [507CMX] ✩ Operating Temperature Restrictions (*1) • Ambient temperature: 0 °C to 35 °C • The same operating temperature restrictions apply to the speaker system (PDP-S53-LR). *1 For this installation, set the ‘FAN CONTROL’ to ‘MAX’ as shown in “5.4.3 Adjustment and Setting in the Integrator Mode...

52 [507CMX] (2) When the Plasma Display is in a confined space Operating this display in confined spaces is not recommended. • If the display is to be used in confined spaces, observe the following conditions shown in the drawing below: A ≥ 50 • If heat remains in the enclosed space, the temperature...

53 [507CMX] 2 Installing three or more units (Horizontal connection) The following table lists the operating temperature conditions. Use the units under conditions that keep the outside atmosphere in this range. A Unit A Unit B ✩ Operating Temperature Restrictions Distance from wall (A) Ambient temp...

54 [507CMX] 3.5.10 Multiple While the display is designed to accommodate side-by-side installations, keep in mind that specific installation configurations may affect ventilation. Observe the following requirements: 1 Installing multiple (Two vertical units) The following table lists the operating t...

57 [427CMX] 3.6.2 Hanging on the wall Carefully read the following imformation before attempting to hang the unit on a wall. Take note of the various limitationsspecified in this section. Mount the unit so that twisting, bending, or any other warping does not exceed 4 mm. Shaded areas indicate attac...

63 [427CMX] Special Installation (Ceiling suspension with wires) When suspending from a ceiling with wire, use the brackets shown below to prevent concentrating loads on the upper two fixing points. For additional safety, secure the wires to separate fittings or parts of the ceiling. Use mounting sc...

76 How to use the standard mounting components [507CMX : 427CMX] 4.1 Standard Mounting Components Features and Characteristics In addition to reliability and vivid display resulting from its large screen area, brightness, and image quality, the Plasma Display (PDP-507CMX/PDP-427CMX) is thin and ligh...

77 Handling the Standard Mounting Components 4.2 Handling the Standard Mounting Components 4.2.1 Handling precautions This section of the manual discusses ways to mount, install, and handle the mounting hardware exclusively designed for Pioneer Plasma Displays. Mounting should be performed by qualif...

78 4.3 Installation of the Attachment Stand (Can be used only with the PDP-427CMX) Be sure to fix the supplied stands to the installation surface.Use commercially available M8 bolts that are 25 mmlonger than the thickness of the installation surface. Installation of the Attachment Stand 1 Fix the su...

79 [427CMX] Installation of the Attachment Stand Dimensions (Unit: mm) 23 610 633 447.2 70 1022 40.4 74.3 98 127.7 300 252.4 31.4 22.1 10 79 10 53.5 24.3 10 12 50 110 66.8 ø24 R12 70 300

81 7 PDA-5004 Video-related INPUT1 Input The following signal is supported only when a PDA-5004 is installed. • Component video signal Y ........................ 1 Vp-p/75 Ω /negative sync. P B /C B , P R /C R ........ 0.7 Vp-p (color 100 %)/75 Ω INPUT2 Input DVI-D 24-pin connector Digital video sig...

85 Video Card: PDA-5003/PDA-5004 4 Affix the accessory connector indicator label to the Plasma Display then affix the remote control label to the remote control that is furnished with the Plasma Display. Notes Note Use a soft cloth to gently wipe away any dust or soiling from the surface before affi...

87 Video Card: PDA-5003/PDA-5004 Connection to AV components Connection to AV component equipped withcomponent video jacks Make component video connections for AVcomponents equipped with component video jacks. When connecting to ANALOG RGB IN (INPUT1) ANALOG RGB OUT (D-Sub) ANALOG RGB IN (D-Sub) INP...

88 Video Card: PDA-5003/PDA-5004 Connection of G ON SYNC analog RGB source Make G ON SYNC connections for a component withoutput that has the synchronization signal layered ontop of the green signal. When connecting to ANALOG RGB IN (INPUT1) ANALOG RGB OUT (D-Sub) ANALOG RGB IN (D-Sub) INPUT1 On-scr...

90 Video Card: PDA-5003/PDA-5004 When connecting to ANALOG RGB IN (INPUT1) ANALOG RGB OUT (D-Sub) ANALOG RGB IN (D-Sub) INPUT1 Connect the cable corresponding to the shape of theinput terminal on the display and the personalcomputer’s output terminal.Secure by tightening the terminal screws on both ...

91 Video Card: PDA-5003/PDA-5004 When connecting to COMPONENT VIDEO (INPUT5) [Connections for PDA-5004] Y Pb/Cb Pr/Cr I N P U T 5 COMPONENTVIDEO On-screen setup is necessary after connection. Connection of composite SYNC analog RGBsource Make composite SYNC connections for a personalcomputer with ou...

92 Video Card: PDA-5003/PDA-5004 4.4.7 Connection to INPUT2 A computer equipped with DVI output (digital RGB signal)or an AV component equipped with DVI output, can beconnected to the Plasma Display’s DVI connector. DIGITAL RGB(DVI-D) INPUT2 On-screen setup is necessary after connection. Note Use a ...

94 Video Card: PDA-5003/PDA-5004 4.4.11 Audio connections Before making connections, be sure to check that theaudio component’s power and the display’s main poweris off. Connect an audio component to the audioinput jack of the Plasma Display with installedvideo card. When the video card is installed...

97 Video Card: PDA-5003/PDA-5004 INPUT 2 7 Video signals supported ★ (applies only when equipped with PDA-5003/PDA-5004) INPUT 3 ★ (applies only when equipped with PDA-5003/PDA-5004): Y/C Separate video signal NTSC, PAL, SECAM, 4.43 NTSC, PAL M, PAL N INPUT 4 ★ (applies only when equipped with PDA-5...

98 4.5.2 Installation coordinates for screws used to attach the stand to a surface * When stabilizing the stand to a surface, use M6 longer than 20 mm. Unit: mm (inch) 4.5 Table Top Stand: PDK-TS07 4.5.1 Specifications External dimensions ................. 566 mm (W) × 508 mm (H) × 339 mm (D) (22-9/...

100 4.5.4 Stand assembling 1) Assembling Steps 1 Turn the base cover over so that the bottom is facing up. 2 Insert the stand pipes into the base cover. 3 Use the included screws (4 mm × 8 mm) to stabilize the stand pipes. Note Assemble the stand with a soft sheet placed under the base cover.If a sh...

101 Table Top Stand: PDK-TS07 4.5.5 Attaching the Stand to the Plasma Display The Plasma Display is heavy, has no depth, and isunstable, so be sure to have at least two peopleassemble and install it. Note Insert the bolts in the holes vertically. Place a sheet or protective cover to protect the disp...

102 Table Top Stand: PDK-TS07 After attachment, take measures to prevent it fromfalling over. 7 Using a wall for stabilization 1 Attaching the accessory falling prevention bolts(hooks) to the Plasma Display (two locations). 2 Using strong cords to firmly stabilize it appropriately and firmly to a wa...

106 5 Attach the wall side hardware to the wall.Install the wall side hardware (four locations) symmetri-cally on the left and right side (one at each locationfrom the center of the ). Wall strength and ma- terial determines the type of screws and bolts (soldseparately) needed for this installation....

107 Tilt Mount Unit: PDK-5011 Hook Closing Opening 6 Attach the hook on the PDP side hardware to the wallside hardware. Note Do not hold the speakers during the installation work. Always have at least two people do this task. Verify that the hook has been hung beforelifting the Plasma Display into p...

108 Tilt Mount Unit: PDK-5011 Opening Closing Hexagon wrench Measuring the opening distanceX provides an approximate anglevalue. X When it is in this state, do not turnthe adjustment screw any further inthe closing direction. B Criterion when its angle is 25° When it is in this state, do not turn th...

112 Wall Mount Unit: PDK-WM01 4.7.3 Assembling the mounting hardware and mounting the display 1 Remove the push rivet of the lock plate and the bottomanchor screw (M6 x 14 mm (9/16 inch)) (one location:left and right sides) 1 Move the push rivet of the lock plate to itsunlocked position (shown in th...

113 Wall Mount Unit: PDK-WM01 6 Hang the hook of the PDP side metal fitting on thewall side metal fitting 1 Hang the hook on the ceiling surface part of thePDP side metal fitting on the wall side metalfitting. 2 Raise the lock bar to attach the Plasma Display.Make sure that the lock bar is fully low...

114 Wall Mount Unit: PDK-WM01 8 With the lock bar in the lock position, fix the lock platefirmly in place with push rivet and the anchor screw(M6 x 14 mm (9/16 inch)) (one location: left and rightsides) removed in step 1 (one location: left and right sides). • If there are speakers installed on both...

115 Wall Mount Unit: PDK-WM01 4 Raise the lock bar then pull the bottom of the PlasmaDisplay forward. Pull out the bottom ofthe Plasma Display. 5 Raise to remove the Plasma Display. Raise and remove the Plasma Display. Pull out the bottom of the Plasma Display very carefully so that the hook on the ...

117 Ceiling Mount Unit: PDK-5012 4.8.2 External Dimensions 7 When using Plasma Display PDP-507CMX (Unit: mm) R673 R616 45 ° 45 ° 736 496 (530) 1222 300 980 800 ø60.5 4-ø13.5 x 22 200 1168 25 ° 216 131 145 67 98 33 80 277 (493) 329 100 ø70 241 300 Attachment holes (six locations) Center of the displa...

118 [507CMX : 427CMX] Ceiling Mount Unit: PDK-5012 7 When using Plasma Display PDP-427CMX (Unit: mm) R580 R510 45 ° 45 ° 4- φ 13.5X22 129 98 47 1062 110 67 80 277 (493) 329 100 φ 70 φ 240.5 211 300 200 1022 758 980 496 (530) 300 610 φ 60.5 This circle shows the path that the outermost part of the Pl...

119 Ceiling Mount Unit: PDK-5012 Ceiling suspension hardware Anchor Foundation ceiling Safety wire Bolt (NOTE) Safety wires serve as important backups in keeping the unit securely mounted. 1 Firmly attach the safety wire to the Plasma Display attachment hole and pass it through the supporting column...

120 Ceiling Mount Unit: PDK-5012 4.8.4 Attach the Plasma Display 1 Attach the PDP bracket to the Plasma Display. Note • Place a sheet or protective cover to protect the dis- play from scratches or damage. • Be sure to work on top of a flat table or similar sur- face. • Be careful that the PDP bracke...

121 Ceiling Mount Unit: PDK-5012 5 ° 10 ° 15 ° 20 ° 4.8.5 Angle setup Left-right Adjustment You can adjust it 45° to the left or right by loosening the top screw. Set the desired angle then tighten the screw. Vertical Adjustment You can adjust its vertical angle by loosening the screws on the left a...

126 Mobile Cart: PDK-5014 Bracket Plasma Display Hexagonal bored bolts(M8 × 20 mm) Top side of Plasma Display 2 Attach bracket bolts to display stand Attach the hexagonal bored bolts (M8 × 20 mm) to the display stand, being sure to leave a space of 5 to 6 millimeters when doing so. These bolts may b...

127 To safely attach the brackets to the support columns, be sure to always have two people do this task asshown in the drawing. [Adjusting the angle of the Plasma Display screen] For easier viewing, angle it forwards by alteringthe bracket attachment locations (5°). 5 Attach the stand shelf to the ...

132 4.10.3 Assembly Procedure 1 Temporarily fasten the vertical a and horizontal b frames using all of the M5 plus/minus screws with washers e . 2 Attach the special eye bolts c to the spring washers h , and insert them into the appropriate holes. Secure the small flat washers j and nuts g (For addi...

133 3 Place the bracket on a level table or platform for the final tightening of the bolts. <Wrong> Table, etc. If placed in this position, it will be difficult to alignthe holes. h i f h i f PDP bracket 5 Place a large flat washer i on each of the designated holes. Tighten well the monitor mo...

134 PDP Bracket: PDK-5005 Use the Special eye bolt only at the specified locations. Improper use of Special eye bolts within the Plasma Display main body may damage the display's blind nut. Caution Special eye bolt Wire Wire PDP bracket When hanging by wires etc., do not add any devices other than t...

136 Speaker System: PDP-S53-LR 4.11 Speaker System: PDP-S53-LR (Can be used only with the PDP-507CMX) 4.11.1 Specifications External dimensions ................. 90 mm (W) × 736 mm (H) × 96 mm (D) (Not including attachment plates; Qty: 1) (3-17/32 in. (W) × 28-31/32 in. (H) × 3-25/32 in. (D)) When m...

138 Speaker System: PDP-S53-LR 4.11.3 Installation on the Plasma Display 1) Installation procedure Install the speaker system according to the steps (1)through (4). (1) Remove the seals from the cushions and then attach the cushions to the sides of the speakers in thelocations indicated in the diagr...

139 Speaker System: PDP-S53-LR 2) Connect the cords (Turn off the power of all connected units beforeconnecting the cords.) Use the provided speaker cords to connect theR/L speaker jacks of the monitor to the speaker jacks ofthe speakers. Once the cords have been connected, pull on the cordslightly ...

142 Speaker System: PDP-S56-LR [427CMX] 4.12.3 Installation on the Plasma Display 1) Installation procedure Install the speaker system according to the steps (1) through (4). Notes • The speakers are designed specifically for the left (L) and right (R) sides of the Plasma Display. When mounting them...

143 [427CMX] Speaker System: PDP-S56-LR 2) Connect the cords (Turn off the power of all connected units before connecting the cords.) Connect the display’s SPEAKER R and L terminals with the speakers’ terminals using the included connection cords. Cord Clamper Remove the seal from the rear of the co...

144 Before Beginning Adjustment/Setting 5.1 Before Beginning Adjustment There are three methods for adjusting this display: • Main control panel • Remote control • Personal computer (RS-232C control) Carefully read and gain a good understanding of this section before beginning adjustment. Items that...

145 Before Beginning Adjustments 3 Integrator Mode This mode provides an adjustment function for integrator options. This mode has white-balance adjustment and various detailed settings in addition to the items in the menu mode. For details, refer to section 5.4, “Integrator Mode” (pg. 214). 4 RS-23...

146 Before Beginning Adjustments 5.1.3 List of Input Correspondence Signals 1) Input correspondence signals (personal computer signals) INPUT1 [PDP-507CMX] : Not available. Resolution (Dot x Line) Vertical DOT BY DOT FULL Remarks Screen size (Dot x line) Horizontal 4:3 Refresh rate 640x400 720x400 6...

148 Before Beginning Adjustments Resolution (Dot x Line) Vertical DOT BY DOT FULL Remarks Screen size (Dot x line) Horizontal 4:3 : Not available. Refresh rate : Optimal picture. Adjustment of picture position, refresh rate, phase etc., may be necessary. : Picture will be enlarged but some fine deta...

152 Before Beginning Adjustments 2) Screen size Screen size Personal computer signal Remarks FULL This is for wide-screen video (squeeze) (For a 16:9 source, roundness is nearly accurate). 4:3 For a 4:3 source, roundness can be accurately reproduced (In order to prevent burning of the screen, this s...

153 3) Input correspondence signals (video signals) ★ (Applicable only when a PDA-5003/PDA-5004 is installed.) INPUT1, INPUT5 ★ : Not available. 15.625 28.13 31.25 37.50 56.20 62.50 15.734 31.5 33.75 45.0 67.5 Vertical f V (Hz) Horizontal f H (kHz) Signal format 4:3 FULL ZOOM Remarks 50 60 Component...

154 Before Beginning Adjustments INPUT4 ★ Signal Format Composite Composite Composite Composite Composite Composite 4 : 3 FULL ZOOM WIDE CINEMA 14:9 2.35:1 Remark Screen size NTSC PAL SECAM 4.43 NTSC PAL M PAL N ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ • ‘U...

162 Before Beginning Adjustments 5.1.4 List of Adjustable and Settable Items 1) Menu Mode 7 PDP-507CMX/PDP-427CMX *1: INPUT1 case*2: INPUT2 case(Note 1) The OPTION settings are common settings for all inputs.

164 Before Beginning Adjustments 7 PDA-5003/PDA-5004 ★ : Applicable only when a PDA-5003/PDA-5004 is installed. : Cannot be set according to the signal. *1: INPUT5 case*2: INPUT3 or INPUT4 cases (Note 1) The OPTION settings are common settings for all inputs.

165 Before Beginning Adjustments 7 Slot card other than PDA-5003/PDA-5004 ★ : Applicable only when a video card is installed. : Cannot be set according to the signal. *1: INPUT3 to INPUT5 analog signal cases*2: INPUT3 to INPUT5 digital signal cases(Note 1) The OPTION settings are common settings for...

166 Before Beginning Adjustments 2) Integrator mode 7 PDP-507CMX/PDP-427CMX (Note) The OPTION settings are common settings for all inputs.

171 Normal Operating Mode 5.2 Normal Operation Mode 5.2.1 About normal operation mode The following controls are possible in the normal operation mode. 1 Switching input• Pressing the [INPUT1] to [INPUT5] buttons on the remote control changes the input that setting.• Pressing the [INPUT] button on t...

172 Normal Operating Mode 4 Volume Adjustment/Muting • Pressing the [VOLUME+] button on the remote control or main-control panel raises the volume. • Pressing the [VOLUME-] button on the remote control or main-control panel lowers the volume. • Pressing the [MUTING] button on the remote control swit...

173 Menu Mode 5.3 Menu Mode 5.3.1 About menu mode 1) Entering/leaving the menu mode • Pressing the [MENU] button on the remote control or main-control panel in the normal-operation mode causes the menu screen to appear. Pressing the [MENU] button while in the menu mode causes the menu to close. 2) W...

174 Menu Mode 5.3.3 Example of a Menu Mode Operation The basic operation in the menu mode will be explained using brightness adjustment as an example. 1 Press the MENU button to display the menuscreen. S C R E E N S E T U P O P T I O N : 0 : 0 : 0 C O N T R A S T : 0 B R I G H T N E S S H . E N H A ...

175 Menu Mode 5.3.4 Adjustment and setting in the Menu Mode 1) Power Management Setting When no video signal (synchronizing signal) is detected, this function automatically sets the energy saving state to save power. • To disable the energy saving function, set to [OFF]. • When there is PC signal in...

176 Menu Mode 2) Signal Format Setting This display automatically identifies PC signals and video signals such as from a DVD player by the frequency of the input signal. The panel is equipped with a function for identifying the resolution of a PC signal. Factory setting: AUTO 1 Select ‘SETUP’. 2 Pla...

177 Menu Mode 3) Menu Language Display Setting The factory setting for the menu display language is English. To change to another language, set the selection in the menu. Factory setting: ENGLISH 1 Select ‘OPTION’. 2 Place the cursor over ‘LANGUAGE’ and press the [SET] button. 3 Each time a [ 2 / 3 ...

178 Menu Mode ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ STANDARD1, STANDARD2 (STANDARD)* For an overall bright video, there is no change(Figure on the left).For an overall dark video, the peak brightnessis reproduced even bright...

179 Menu Mode 1 Select ‘OPTION’. 2 Place the cursor over ‘ENERGY SAVE’ then press the [SET] button to change the setting. Each time the [SET] button is pressed, the setting changes as shown below. The ‘ENERGY SAVE’ setting is common for all inputs. M E N U I N P U T 1 CHANGE SET EXIT MENU S C R E E ...

182 Menu Mode 8) Soft Focus Setting Images are softened by suppressing the edge contrast. Factory setting: OFF 1 Select ‘OPTION’. 2 Place the cursor on ‘SCREEN MGT.’ then press the [SET] button. 2 Place the cursor on ‘SOFT FOCUS’ then press the [ 2 / 3 ] buttons to change the settings. Each time a [...

183 Menu Mode 9) Auto Set Up Mode Setting This function automatically adjusts the signal when the power is turned ON, when the input is changed, and when the type of input signal is changed. Factory setting: INACTIVE 1 Select ‘OPTION’. 2 Place the cursor on ‘AUTO SETUP MODE’ then press the [SET] but...

184 Menu Mode 10) Screen Position, Clock Frequency and Clock Phase Adjustment In AUTO SET UP, the position and clock are optimally set. However, depending on the type of signal, adjustment may be off. If this should occur, refer to the procedure below and make the adjustment manually. Example) When ...

186 Menu Mode 11) Auto Function Mode Setting With the Auto Function mode it is possible to automatically change the input when a signal is detected. Factory setting: OFF 1 Select ‘OPTION’. 2 Place the cursor over ‘AUTO FUNCTION’ then press the [SET] button to change the setting. Each time the [SET] ...

187 Menu Mode 12) PIP DETECT Setting During picture-in-picture display, if no subscreen input signal is detected then the black borders of the subscreen are automatically turned off. The subscreen mode function is disabled during side-by-side display. * The lack of a subscreen input signal means the...

188 Menu Mode 13) SPLIT FREEZE Setting For setting other than [OFF], the image displayed when the FREEZE button is pressed is displayed in a subscreen as a freeze-frame image. Factory setting: OFF 1 Select ‘OPTION’. 2 Place the cursor on ‘SPLIT FREEZE’ then press the [SET] button to change the setti...

189 Menu Mode [Applicable only when a PDA-5003/PDA-5004 is installed] 5.3.6 Example of a Menu Mode Operation (Applicable only when a PDA-5003/PDA- 5004 is installed.) The basic operation in the menu mode is explained using brightness adjustment as an example. MENU 5 / ∞ SET 2 / 3 Remote control unit...

190 Menu Mode [Applicable only when a PDA-5003/PDA-5004 is installed] 5.3.7 Adjustment and setting in the Menu Mode (Applicable only when a PDA-5003/PDA-5004 is installed.) 1) Color Temperature Setting The color temperature of the video signal input can be set. Setting should be performed for INPUT1...

191 Menu Mode [Applicable only when a PDA-5003/PDA-5004 is installed] 2) Power Management and Auto Power OFF Setting When no video signal (synchronizing signal) is detected, this function automatically sets the energy saving state in order to save power. • To disable the energy saving function, set ...

192 Menu Mode [Applicable only when a PDA-5003/PDA-5004 is installed] 3) DNR (digital noise reduction) Setting The DNR (digital noise reduction) setting can be changed to improve the S/N ratio when a video signal is input. The setting should be performed for each input (INPUT1 to INPUT 5) and each s...

193 Menu Mode [Applicable only when a PDA-5003/PDA-5004 is installed] 4) MPEG NR Setting This is set when the noise (mosquito noise) of the video such as in a digital broadcast or DVD is disturbing. The setting should be performed for each input (INPUT1 to INPUT5) and each signal. Settable condition...

194 Menu Mode [Applicable only when a PDA-5003/PDA-5004 is installed] 5) CTI Setting This setting sharpens the color contours as desired. The setting should be performed for each input (INPUT1 to INPUT5) and each signal. Settable condition: When there is video signal input Factory setting: ON 1 Sele...

195 Menu Mode [Applicable only when a PDA-5003/PDA-5004 is installed] 6) PURECINEMA Setting The PURECINEMA function automatically detects video signals such as movies that are filmed at 24 frames per second then converts them to a progressive video signal by a 2-3 pull-down process. Normally, when t...

196 Menu Mode [Applicable only when a PDA-5003/PDA-5004 is installed] Input Correspondence Signal INPUT1, INPUT5 INPUT3, INPUT4 28.13 31.25 37.50 31.5 33.75 45.0 Vertical f V (Hz) Horizontal f H (kHz) Signal format OFF ON Types of display call signals 50 60 RGB RGB RGB RGB RGB RGB PURECINEMA 1125i (...

197 Menu Mode [Applicable only when a PDA-5003/PDA-5004 is installed] 7) Color Decoding Setting When a video signal is input at INPUT1, INPUT2 and INPUT5, it corresponds to an RGB and component video signal. This setting must comply with the connected device. The setting should be performed as shown...

198 Menu Mode [Applicable only when a PDA-5003/PDA-5004 is installed] 8) Color System Setting INPUT3 and INPUT4 correspond to and automatically determine the various TV systems used in countries around the world. Normally, this setting is set to ‘COLOR SYSTEM: AUTO (Auto detection)’, however, in the...

199 Menu Mode [Applicable only when a PDA-5003/PDA-5004 is installed] 9) Signal Format Setting This display automatically identifies PC signals and video signals such as from a DVD player by the frequency of the input signal. The panel is equipped with a function for identifying the resolution of a ...

201 Menu Mode [Applicable only when a PDA-5003/PDA-5004 is installed] 10) DVI Setting Choose the component type (either [PC] or [VIDEO]) that is connected to INPUT2. Settable condition: INPUT2 Factory setting: PLUG/PLAY: PC BLACK LEVEL: LOW 1 Select ‘SETUP’. 2 Place the cursor on ‘DVI SET UP’ then p...

202 Menu Mode [Applicable only when a PDA-5003/PDA-5004 is installed] 11) Menu Language Display Setting The factory setting for the menu display language is English. To change to another language it is necessary to change the setting. Factory setting: ENGLISH 1 Select ‘OPTION’. 2 Place the cursor ov...

203 Menu Mode [Applicable only when a PDA-5003/PDA-5004 is installed] ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ STANDARD1, STANDARD2 (STANDARD)* For an overall bright video, there is no change(Figure on the left).For an overall ...

207 Menu Mode [Applicable only when a PDA-5003/PDA-5004 is installed] 16) Soft Focus Setting Images are softened by suppressing the edge contrast. Factory setting: OFF 1 Select ‘OPTION’. 2 Place the cursor on ‘SCREEN MGT.’ then press the [SET] button. 2 Place the cursor on ‘SOFT FOCUS’ then press th...

208 Menu Mode [Applicable only when a PDA-5003/PDA-5004 is installed] 17) Auto Set Up Mode Setting This function automatically adjusts the signal when the power is turned ON, when input is changed, and when the type of input signal is changed. Factory setting: INACTIVE 1 Select ‘OPTION’. 2 Place the...

209 Menu Mode [Applicable only when a PDA-5003/PDA-5004 is installed] 18) Screen Position, Clock Frequency and Clock Phase Adjustment In AUTO SET UP, the position and clock are optimally set. However, depending on the type of signal, adjustment may be off. In this situation, manually adjust the sett...

211 Menu Mode [Applicable only when a PDA-5003/PDA-5004 is installed] 19) Auto Function Mode Setting With the Auto Function mode it is possible to automatically change the input when a signal is detected. Factory setting: OFF 1 Select ‘OPTION’. 2 Place the cursor over ‘AUTO FUNCTION’ then press the ...

212 Menu Mode [Applicable only when a PDA-5003/PDA-5004 is installed] 20) PIP DETECT Setting During picture-in-picture display, if no subscreen input signal is detected then the black borders of the subscreen are automatically turned off. The subscreen mode function is disabled during side-by-side d...

213 Menu Mode [Applicable only when a PDA-5003/PDA-5004 is installed] 21) SPLIT FREEZE Setting For setting other than [OFF], the image displayed when the FREEZE button is pressed is displayed in a subscreen as a freeze-frame image. Factory setting: OFF 1 Select ‘OPTION’. 2 Place the cursor on ‘SPLIT...

215 Integrator Mode 5.4.2 Example of Integrator Mode Operation The basic operation in the menu mode is explained using brightness adjustment as an example. 4 Press the [MENU] button on the remote controlunit or the main-control panel when ‘DISPLAYCALL 2’ is displayed to open up the integratormode sc...

216 Integrator Mode 5.4.3 Adjustment and Setting in the Integrator Mode For details about button controls, refer to section 5.4.2, “Example of Integrator Mode Operation” (pg. 215). 1) PICTURE Adjustment The adjustable items shown below are a little different than in the menu mode’s PICTURE adjustmen...

217 Integrator Mode 2) WHITE BALANCE Adjustment The adjustable items are R. HIGH, G. HIGH, B. HIGH, R. LOW, G. LOW and B. LOW. 1 Enter the integrator mode. (Refer to section 5.4.1, “About the Integrator Mode” (pg. 214).) Select ‘PICTURE’. 2 Place the cursor on ‘WHITE BALANCE’ then press the [SET] bu...

218 Integrator Mode 3) COLOR DETAIL setting 1 Enter the integrator mode. (Refer to section 5.4.1, “About the Integrator Mode” (pg. 214).) 2 Select ‘PICTURE’. 3 Place the cursor on ‘COLOR DETAIL’ then press the [SET] button. 4 Use the [ 5 / ∞ ] buttons to switch between items. 5 Adjustment is perform...

221 Integrator Mode 6) Brightness Enhancement (BRT. ENHANCE) Setting at the Center of the Screen This function improves and enhances the brightness of the center of the screen. • When emphasizing the brightness of the screen: Set to ON. • When emphasizing uniformity of the screen: Set to OFF. Factor...

222 Integrator Mode 1 AUDIO INPUT (INPUT1) Stereo mini jack 2 AUDIO INPUT (INPUT2) Stereo mini jack 3 AUDIO INPUT (INPUT3/4) ★ 1 (INPUT3) ★ 2 Pin jack 4 AUDIO INPUT (INPUT4) ★ 2 Pin jack 5 AUDIO INPUT (INPUT5) ★ Pin jack INPUT1SUB VOLUME INPUT2SUB VOLUME INPUT3SUB VOLUME INPUT4SUB VOLUME INPUT5SUB V...

223 Integrator Mode I N T E G R A T O R I N P U T 1 ENTER S C R E E N S E T U P O P T I O N P R O G R A M T I M E R S C R E E N M A S KS I D E M A S KV I D E O W A L LB A U D R A T E I D N O . S E T P I C T U R E : : : SET EXIT MENU G R E E N 0 1 H 3 8 4 0 0 B P S 8) Program Timer Setting This optio...

224 Integrator Mode 7 Viewing the program timer screen • “ ∗ ” in the DATE column This indicates “every”. When there is only “ ∗ ” in the DATE column, it means “every day”, while “*FRI” means “every Friday”. • ON, OFF column “–“ The hour and minute must be set for this option to function. • INPUT, F...

225 Integrator Mode 9) SCREEN MASK Setting This function displays the inverse of the normal picture on the entire screen, or displays a single color such as white, red, green, blue or yellow according to an internal signal in the Plasma Display. When setting something other than ‘OFF’ or ‘INVERSE’ i...

226 Integrator Mode 10) SIDE MASK Setting This mode is for adjusting the brightness of the no-image section around the screen when the screen size is ‘4:3’ etc. When performing adjustments, pay attention to the brightness balance between the displayed signal and that of the adjacent sets. Factory se...

228 Integrator Mode 11) VIDEO WALL Setting Use this feature to configure a four panel to 25-panel video wall. Note This setting is adjusted when the screen size is full display. It is not correctly displayed in other screen sizes. (See pg. 161) Factory setting: DIVIDER .................. OFF POSITIO...

229 Integrator Mode 7 Setting the position The POSITION is where a particular panel resides in the video wall. 6 Place the cursor on ‘POSITION’ then press the [SET] button. Note Set ‘DIVIDER‘ at other than ‘OFF‘ and ‘1‘. 7 Use the [ 2 / 3 ] buttons to change the settings. [Setting the POSITION] • Wh...

230 Integrator Mode Display 1 Display 2 Display 3 Display 4 No.1 No.2 No.3 No.4 No.1 No.2 No.3 No.4 No.1 No.2 No.3 No.4 No.1 No.2 No.3 No.4 COMBINATION IN COMBINATION OUT COMBINATIONOUT COMBINATION IN COMBINATIONIN COMBINATION OUT COMBINATIONOUT COMBINATIONIN 7 Setting AUTO ID When ‘ON‘ is set, the ...

231 Integrator Mode (When 16 and 25 screen Video Walls) OFF → MODE1 (after approx. one second)* → MODE2 (after approx. two seconds)* * The seconds shown above are yardstick targets; errors may occur. Shift and set the power on timing by grouping OFF, MODE1, and MODE2. 7 Setting the ABL LINK This opt...

232 Integrator Mode 12) BAUD RATE Setting It is possible to switch the RS-232C transmission speed (baud rate) when controlling or adjusting the display using a PC. The baud rate can be set to 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, or 38400 bps. Factory setting: 9600 bps 1 Enter the integ...

233 Integrator Mode 13) Assigning an ID This option assigns the ID necessary to adjust only the designated display in a video wall or to make an adjustment using an RS-232C command. For details see “5.5 RS-232C Adjustment” (pg. 262). Factory setting: ALL 1 Enter the integrator mode. (Refer to sectio...

235 Integrator Mode 14) Cooling Fan Control Setting A cooling fan is located on the rear surface of the display. This function switches the method for controlling this fan. For automatic control according to an internal temperature sensor, Set to ‘AUTO’. For maximum rpm (AUTO CONTROL: OFF): Set to ‘...

236 Integrator Mode 15) OSD Display Setting This option allows the On-Screen-Display (OSD) menu to appear or to be hidden. OSD menu display features and location are adjustable. Factory setting: DISPLAY ........... ON SIZE ................... LARGE ANGLE .............. H 1 Enter the integrator mode....

238 Integrator Mode 16) FRONT INDICATOR Setting This function controls the flashing of the indicator on the front of the display. Factory setting: ON 1 Enter the integrator mode. (Refer to section 5.4.1, “About the Integrator Mode” (pg. 214).) 2 Select ‘OPTION’. 3 Place the cursor on ‘FRONT INDICATO...

239 Integrator Mode 17) COLOR MODE Setting In addition to the normal operation mode (NORMAL), this display has a (STUDIO) mode for use in a TV studio. The adjustment values for ‘PICTURE’ and ‘SCREEN’ can be set independently. (Refer to section 5.4.4, “PICTURE, White Balance and SCREEN position Adjus...

241 Integrator Mode UNDERSCAN This function causes the outer edge of the display to appear, beyond the normal effective data area for a video signal. [Method of Use] After setting the UNDERSCAN setting to ON and leaving the MENU mode, select ‘UNDERSCAN’ with the remote control’s SCREEN SIZE button. ...

242 Integrator Mode I N T E G R A T O R I N P U T 1 CHANGE S C R E E N S E T U P O P T I O N F A N C O N T R O LO S DF R O N T I N D I C A T O RC O L O R MO D EP R O U S E F R C P I C T U R E : : : : SET EXIT MENU A U T O N O R M A L O N O N 3 ON OFF 2 Retake at a TV studio (PAL camera) 49.67 Retake...

244 Integrator Mode 20) POWER ON MODE Setting This function sets the input at the time the power is switched on. Factory setting: INPUT .......... LAST VOLUME ..... LAST 1 Enter the integrator mode. (Refer to section 5.4.1, “About the Integrator Mode” (pg. 214).) 2 Select ‘OPTION’. 3 Place the curso...

245 Integrator Mode 3 3 0 to 42 LAST 2 2 7 Setting when MULTI is selected Place the cursor on ‘MULTI MODE’ then use the [ 2 / 3 ] buttons to change the settings. Each time a [ 2 / 3 ] button is pressed, the setting changes as shown below. Change the setting by placing the cursor on LEFT (or MAIN) in...

246 Integrator Mode 21) SEAMLESS SW Setting This setting switches between inputs at a speed of approximately 0.4 seconds. Factory setting: SEAMLESS .................. OFF SELECT1 ...................... INPUT1 SELECT2 ...................... INPUT2 1 Enter the integrator mode. (Refer to section 5.4.1,...

248 Integrator Mode 4 Each time the [SET] button is pressed, the setting changes as shown below (the OSD is also reversed). The ‘MIRROR MODE’ setting is common for all inputs. IN TE GR AT OR IN PU T1 CHANGE SC RE EN SE TU P OP TI ON PW R. O N M OD E SE AM LE SS S W MI R RO R MO DE MU LT I S CR EE N ...

249 Integrator Mode 23) MULTISCREEN Setting This function divides the screen into two areas when the remote control’s SPLIT button is pressed. Factory setting: S BY S SIZE .................. NORMAL S BY S LAYOUT ........... MODE1 PIP SIZE ....................... 2 TRANSLUCENT PIP ..... OFF BANNER PI...

250 Integrator Mode S BY S SIZE/S BY S LAYOUT Select a SIDE BY SIDE mode display, six options. MODE1 MODE2 MODE3 NORMAL SBYS1 SBYS2 SBYS3 FULL SBYS4 SBYS5 SBYS6 PDP-507CMX PDP-427CMX A B A B A B A B B A B A 512 (512)* 512 (512)* 512 512 256 768 768 256 512 (384)* 768 256 (192)* 768 768 256 (192)* 76...

251 Integrator Mode PIP SIZE Select the size of the PICTURE IN PICTURE sub-screen. Note It is also reflected in the sub-screen size when PIP has been set by “5.3.4 Adjustments and setting in the Menu Mode: 13) SPLIT FREEZE Setting (pg. 188)”, “5.3.7 Adjustments and setting in the Menu Mode: 21) SPLI...

252 Integrator Mode TRANSLUCENT PIP Select the degree of transparency for the PICTURE IN PICTURE sub-screen. As the translucent percentage rises, the sub-screen becomes less visible, fades. BANNER PIP Select the PICTURE IN PICTURE sub-screen position from the locations shown below. The Banner sub-sc...

253 Integrator Mode 24) REPEAT TIMER Setting When two input modes have been set, they are displayed alternatively. This can be used to set one screen, two screens, or video wall. Factory setting: REPEAT TIMER ............ SINGLE 1. WORK TIME ............ 00H10M INPUT MODE ........... INPUT1 2. WORK ...

254 Integrator Mode 7 Setting the two screen REPEAT TIMER • MODE .................... This sets the display mode. S BY S1 ⇔ S BY S2 ⇔ S BY S3 ⇔ BTM LEFT ⇔ BTM RIGHT ⇔ TOP RIGHT ⇔ TOP LEFT • WORK TIME .......... The display time is set in a range from one minute to 24 hours. [When Side-by-side has be...

255 Integrator Mode 25) FUNCTIONAL LOCK This is the FUNCTIONAL LOCK function that prevents operation from the main unit panel or the remote control in order to prevent improper operation after installation (The RS-232C command is effective.) While the FUNCTIONAL LOCK is set, if the remote control or...

256 Integrator Mode 26) Center Position Display It is possible to display the horizontal and vertical center position. 1 Press the [MUTING] button twice. 2 Press the [SUB INPUT] button. 3 Press the [SET] button. 6 8 3 6 8 3 5 5 5 5 3 8 4 3 8 4 PDP-507CMX PDP-427CMX When it is off, Press the [MENU] b...

257 Integrator Mode 5.4.4 PICTURE, White Balance and SCREEN Position Adjustment Values Memory Area Tables The memory areas for the PICTURE, White Balance and SCREEN adjustment values have the configuration shown below. Adjustments in the menu mode share the same memory as the COLOR MODE NORMAL and S...

259 Integrator Mode ¥CONTRAST¥BRIGHTNESS¥COLOR ¥TINT¥SHARPNESS¥H. POSITION¥V. POSITION¥COLOR TEMP. ¥DNR¥MPEG NR¥CTI¥PURECINEMA INPUT3–SIGNAL#1 ¥CONTRAST¥BRIGHTNESS¥COLOR¥TINT¥SHARPNESS¥C. DETAIL RED¥C. DETAIL YELLOW¥C. DETAIL GREEN¥C. DETAIL CYAN¥C. DETAIL BLUE¥C. DETAIL MAGENTA¥R. HIGH¥G. HIGH¥B. H...

260 Integrator Mode 7 INPUT4 ¥CONTRAST¥BRIGHTNESS¥COLOR ¥TINT¥SHARPNESS¥H. POSITION¥V. POSITION¥COLOR TEMP. ¥DNR¥MPEG NR¥CTI¥PURECINEMA INPUT4–SIGNAL#1 ¥CONTRAST¥BRIGHTNESS¥COLOR¥TINT¥SHARPNESS¥C. DETAIL RED¥C. DETAIL YELLOW¥C. DETAIL GREEN¥C. DETAIL CYAN¥C. DETAIL BLUE¥C. DETAIL MAGENTA¥R. HIGH¥G. ...

261 Integrator Mode 7 INPUT5 ¥CONTRAST¥BRIGHTNESS¥H. ENHANCE !¥V. ENHANCE !¥COLOR ★ ¥TINT ★ ¥SHARPNESS ★ ¥H. POSITION¥V. POSITION¥CLOCK !¥PHASE !¥COLOR TEMP. ★ ¥DNR ★ ¥MPEG NR ★ ¥CTI ★ ¥PURECINEMA ★ ¥COLOR DECODING ★ INPUT5–SIGNAL#1 ¥CONTRAST¥BRIGHTNESS¥H. ENHANCE !¥V. ENHANCE !¥COLOR ★ ¥TINT ★ ¥SHA...

263 RS-232C Adjustment 5.5.2 Interface 1) Connector D-sub 9 pins (male/straight) 2) Pin layout 3) Baud Rate 9 600 bps (standard)(switch-able to 1 200, 2 400, 4 800, 19 200, 38 400 bps) Note The baud rate of this display should be set to match the baud rate of the PC.Also, when the RS-232C cable is e...

264 RS-232C Adjustment 5.5.3 Combination Connection When controlling/adjusting panels, it is convenient to connect several displays to one PC. By performing a combination connection and assigning IDs to the panels, it is possible to control and adjust several displays at the same time or separately....

265 RS-232C Adjustment 5.5.4 ID Assignment The ID is assigned from the PC. Commands: <IDC> (ID CLEAR) ........ Clears the assigned ID <IDS> (ID SET) ............. Assigns an ID IDS is only effective when an ID is not assigned. IDs are assigned starting from the panel closest to the PC. E...

267 RS-232C Adjustment 5.5.5 List of RS-232C Commands (Command 434CMX = Command 43MXE1 / Command 505CMX = Command 50MXE10 , 50MXE11 , 50MXE1 , 50MXE1-S / Command 425CMX = Command 42MXE10) 7 Normal Operation Related Commands Command 434CMX505CMX Command 425CMX Command 427CMX507CMX Function Number dir...

268 RS-232C Adjustment Command 434CMX505CMX Command 425CMX Command 427CMX507CMX Function Number direct Last memory Comment Effective Minimum Maximum MSTS06 + + Sets the MULTI SCREEN to PoutP (side by side, 2-L). – MSTS08 + Sets MULTI SCREEN to SWAP (switches between main and sub screens). – MSTS09 +...

269 RS-232C Adjustment Command 434CMX505CMX Command 425CMX Command 427CMX507CMX Function Number direct Last memory Comment Effective Minimum Maximum CLSS05 + + Sets color system to 4.43NTSC. CLSS06 + + Sets color system to PAL M. CLSS07 + + Sets color system to PAL N. SIGNAL FORMAT SFT + + Displays ...

271 RS-232C Adjustment 7 “INTEGRATOR”–“OPTION” related commands Command 434CMX505CMX Command 425CMX Command 427CMX507CMX Function Number direct Last memory Comment Effective Minimum Maximum SCREEN MASK FMK + + Displays the present set value of SCREEN MASK. FMKS00 + + Sets SCREEN MASK to OFF. FMKS02 ...

273 RS-232C Adjustment Command 434CMX505CMX Command 425CMX Command 427CMX507CMX Function Number direct Last memory Comment Effective Minimum Maximum – BPIS01 + Sets the BANNER PinP input to INPUT1. – BPIS02 + Sets the BANNER PinP input to INPUT2. – BPPS00 + Sets the BANNER PinP setting to OFF. – BPP...

276 RS-232C Adjustment 1) Obtaining QST Status Information Sequence Data Content Size Remarks 1 STX 1 Byte 02hex 2 Command echo-back 3 Byte QST (fixed) 3 Generation information 1 Byte 5 (fixed) 4 Inch information 1 Byte 4: 42 inch 5: 50 inch 5 Forwarding 1 Byte M (fixed) 6 Power source state 1 Byte ...

282 RS-232C Adjustment 7 Check Sum This is data to which 2-Byte ASCII code is added to a data group returned by a QUEST command. STX 02 (hex) 2 Byte 3 Byte 03 (hex) ID QUEST command ETX STX 02 (hex) QUEST command 3 Byte Data *Byte Check sum 2 Byte ETX 03 (hex) PC side Set side A detailed example is ...

283 Screen Burning 5.6 Screen Burning When the same image is reproduced for a long period (still image, telop, etc.), the image is burned into to screen. It may be difficult to remove this image. Burning should be managed by making necessary changes in the video software, projection method, system c...

284 Screen Burning 7 Standard Functions (Settings cannot be changed) 1 Auto Brightness Adjustment (still image detection) When an image that has little or no motion, such as a photograph or computer screen, is displayed for a long period, the screen may appear dimmer. This feature is part of the scr...

285 Precautions on Connecting Camera Images/Concerning frame delay (lip sync) FRC setting Video input signal Input verticalfrequency (Hz) Frame delaynumber (V) ON Video signal Normal time PAL, SECAM, PAL N, 625i (576i), 1125i (1080i) 50 4 NTSC, 4.43NTSC, PAL M, 525i (480i), 1125i (1080i) 60 3 625p (...

286 Precautions 6.1 Precautions 1) If the power shuts down and stays OFF for an extended time, an internal problem has probably occurred (failing part, etc.). Turn OFF the main power switch on the Plasma Display then wait one to two minutes then try turning the power ON again. If the power goes OFF ...

287 Maintenance 1) Be sure to unplug the power cord from the power outlet before performing maintenance. Note If the plasma display is connected to a computer linked to a network, disconnect and reconnect using the following procedure. 7 Disconnect and Remove Hardware 1 Turn the plasma display to St...

288 Maintenance 3) Screen (front protection panel) The screen (front protection panel) is treated with a special coating to prevent glare and is very delicate. To clean it, remove any dust then wipe gently with a soft cloth. Do not clean it with tissue or a rough, textured cloth. DO NOT use solvents...