Pioneer PDP 424MV - Manuals

Page 2 - English; Operating Instructions; Notes on Installation Work:

English En Operating Instructions Thank you very much for purchasing this PIONEER product.Before using your Plasma Display, please carefully read the“Important Information” and these “Operating Instructions” soyou will know how to operate the Plasma Display properly.Keep this manual in a safe place....

Page 3 - Precautions; RISK OF ELECTRIC SHOCK; WARNING; Warning; Important Information; Warnings and Safety Precaution

English Important Information 2 En i En Precautions Please read this manual carefully before using your plasmamonitor and keep the manual handy for future reference. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NOUSER-SERVICEABLE PART...

Page 4 - ii; To avoid damage and prolong operating life:; Recommendations to avoid or minimize phosphor burn-in:; Information to User

English Important Information 3 En ii En To avoid damage and prolong operating life: 1. Use only with 100-240V 50/60Hz AC power supply. Continued operation at line voltages greater than 100-240 Volts AC will shorten the life of the unit, and mighteven cause a fire hazard. 2. Handle the unit carefull...

Page 5 - iii; D E C L A R A T I O N O F C O N F O R M I T Y; Equipment Classification:; We hereby declare that the equipment specified above; IMPORTANT NOTICE; Caution

English Important Information 4 En iii En D E C L A R A T I O N O F C O N F O R M I T Y This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device maynot cause harmful interference, and (2) this device must accept any interference received, ...

Page 6 - iv; IMPORTANT SAFETY INSTRUCTIONS

English Important Information 5 En iv En IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with a dry cloth.7. Do not block any of t...

Page 8 - Contents; Contents of the Package

English Contents 1 En Contents Installation ...................................................... 2 Ventilation Requirements for enclosure mounting .......... 2How to use the safety metal fittings and the screws for safety metal fittings ................................................ 2 Creating a...

Page 9 - * Do not touch or hold the screen face when carrying the unit.; Installation

English Installation 2 En 50 mm (2") 50 mm (2") 50 mm (2") Wall Wall 50 mm (2") 50 mm (2") You can attach your optional mounts or stand to the plasma monitor in one of the following two ways:* While it is upright. (See Drawing A)* As it is laid down with the screen face down (See...

Page 10 - Information; Creating a video wall; Video signal; Cable Management; clamp; To attach

English Installation 3 En Note: 1. The VIDEO1 and PC1 terminals can be used for either INPUT or OUTPUT. When LOOP OUT is ON, do not connect an OUTPUT signal from another unit, that will place an extraordinary load onthe other unit and may damage it. 2. LOOP OUT can not be turned ON while signals are...

Page 11 - Caution on when the plasma monitor is installed vertically; Battery Installation and Replacement

English Installation 4 En OPTION1 RETURN SEL. OK : RGB : RGB : AUTO : 1080B : OFF : OFF 1024 768 EXIT OSD BNC INPUT D-SUB INPUT RGB SELECT HD SELECT INPUT SKIP ALL RESET MENU Bottom side Top side Caution on when the plasma monitor is installed vertically • Use the optional unit. Contact your store o...

Page 12 - Turns the monitor’s power on and off.; Remote sensor window; Receives the signals from the remote control.; Front View; Functions as the CURSOR (; VOLUME; Adjusts the volume. Functions as the CURSOR (; Part Names and Function

English Part Names and Function 5 En q Power ( ) Turns the monitor’s power on and off. w Remote sensor window Receives the signals from the remote control. e STANDBY/ON indicator When the power is on ............................. Lights green.When the power is in the standby mode ... Lights red. r I...

Page 13 - AC IN; Connect the included power cord here.; EXT SPEAKER L and R; EXT SPEAKER terminal and the; COMPONENT1; COMPONENT2: Yo u c a n c o n n e c t D V D s , H i g h; REMOTE IN; Rear View/ Terminal Board

English Part Names and Function 6 En A AC IN Connect the included power cord here. B EXT SPEAKER L and R Connect speakers (optional) here. Maintain the correctpolarity. Connect the (positive) speaker wire to the EXT SPEAKER terminal and the (negative) speaker wire to the EXT SPEAKER terminal on both...

Page 14 - Remote Control

English Part Names and Function 7 En q POWER ON/STANDBY Switches the power on/standby.(This does not operate when STANDBY/ON indicatorof the main unit is off.) w RGB/PC Press this button to select RGB/PC as the source.RGB/PC can also be selected using the INPUT/EXITbutton on the monitor. e COMPONENT...

Page 15 - Basic Operations; To change the size of the picture:

English Basic Operations 8 En Basic Operations POWER To turn the unit ON and OFF: 1. Plug the power cord into an active AC power outlet.2. Press the Power button (on the unit). The monitor’s STANDBY/ON indicator turns red and thestandby mode is set. 3. Press the POWER ON button (on the remote contro...

Page 16 - SCREEN SIZE Operation; With this function, you can select one of six screen sizes.; When viewing videos or digital video discs; FULL size screen; WIDE Operations

English WIDE Operations 9 En SCREEN SIZE Operation (manual) With this function, you can select one of six screen sizes. When viewing videos or digital video discs 1. Press the SCREEN SIZE button on the remote control.2. Within 3 seconds ... Press the SCREEN SIZE button again.The screen size switches...

Page 17 - * “ V G A ” , “ S V G A ” a n d “ S X G A ” a r e r e g i s t e r e d; The picture has the same size as the normal computer image.

English WIDE Operations 10 En Information Supported resolution See page 29 for details on the display output of thevarious VESA signal standards supported by themonitor. When 852 (848) dot 480 line wide VGA* signals with a vertical frequency of 60 Hz andhorizontal frequency of 31.7 (31.0) kHz are in...

Page 18 - Menu Operations; The main menu disappears by pressing the EXIT; OSD; Setting the language for the menus; Example: Setting the menu display to “DEUTSCH”

English OSD (On Screen Display) Controls 11 En Menu Operations The OSD window is displayed with respect to thescreen as shown on the diagram. * Depending on the screen’s mode, the OSD may be displayed differently.In the explanation, the OSD section is shown close up. MAIN MENU 1 / 2 EXIT PICTURE SOU...

Page 19 - :Shaded areas indicate the default value.; Menu Tree

English OSD (On Screen Display) Controls 12 En Main menu Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESET REFERENCE PICTURE CONTRAST ←→ 0 ← 52 → 72 YES 14 BRIGHTNESS ←→ 0 ← 32 → 64 YES 14 SHARPNESS ←→ 0 ← 16 → 32 YES 14 COLOR ←→ 0 ← 32 → 64 YES 14 TINT R ←→ G 0 ← 32 → 64 YES 14 AV SELECTION DYNAMIC/S...

Page 21 - Picture Settings Menu; Adjusting the picture; Example: Adjusting the contrast; Example: Setting the “MOVIE 1” mode; Reducing noise in the picture; Setting the color temperature; Example: Setting “HIGH”

English OSD (On Screen Display) Controls 14 En Picture Settings Menu Adjusting the picture The contrast, brightness, sharpness, color and tint can beadjusted as desired. Example: Adjusting the contrast On “CONTRAST” of “PICTURE” menu, adjust the contrast. PICTURE 1 / 2 CONTRAST BRIGHTNESS SHARPNESS ...

Page 22 - Adjusting the color to the desired level; Changing the Gamma Curve; Making the Low Tone adjustments; Adjusting the colors; Example: Adjusting the color detail adj for blue

English OSD (On Screen Display) Controls 15 En Adjusting the color to the desired level Use this procedure to adjust the white balance for eachcolor temperature to achieve the desired color quality. Example: Adjusting the “R.HIGH” of “HIGH” colortemperature Set “ADVANCED OSD” to “ON” in the main men...

Page 23 - SOUND Settings Menu; Example: Adjusting the bass; Setting the allocation of the audio connectors; Example: Setting “AUDIO INPUT1” to “VIDEO 2”; SCREEN Settings Menu; Adjusting the Auto Picture; PHASE

English OSD (On Screen Display) Controls 16 En SOUND Settings Menu A d j u s t i n g t h e t r e b l e , b a s s a n d l e f t / r i g h tbalance and audio input select The treble, bass and left/right balance can be adjusted tosuit your tastes. Example: Adjusting the bass On “BASS” of “SOUND” menu, ...

Page 24 - Option1 Settings Menu; Setting the on-screen display; Example: Turning the DISPLAY OSD off; Setting the PC2/COMPONENT2 connectors; Example: Set the BNC INPUT mode to “COMP.”

English OSD (On Screen Display) Controls 17 En Option1 Settings Menu Setting the on-screen display This sets the position of the menu, the display format(horizontal or vertical) etc. Example: Turning the DISPLAY OSD off On “OPTION1” menu, select “OSD”, then press the MENU/SET button.The “OSD” menu a...

Page 25 - Example: Setting the “HD SELECT” mode to “1035I”; Setting the Input Skip; See page 29 for the details of the above settings.; Resetting to the default values; Refer to page 12 for items to be reset.

English OSD (On Screen Display) Controls 18 En Setting high definition images to the suitablescreen size Use this procedure to set whether the number of verticallines of the input high definition image is 1035 or 1080. Example: Setting the “HD SELECT” mode to “1035I” On “HD SELECT” of “OPTION1” menu...

Page 26 - Option2 Settings Menu; Example: Turning the power management function on; Setting the picture to suit the movie; Example: Setting the “PURECINEMA” to “OFF”; Reducing burn-in of the screen; Example: Setting “ABL” to “LOCK1”

English OSD (On Screen Display) Controls 19 En Option2 Settings Menu Setting the power management for computerimages T h i s e n e rg y - s a v i n g ( p o w e r m a n a g e m e n t ) f u n c t i o nautomatically reduces the monitor’s power consumptionif no operation is performed for a certain amoun...

Page 28 - Setting the gray level for the SIDE MASK

English OSD (On Screen Display) Controls 21 En SCREEN WIPER When this is set to ON, a white vertical bar movesrepeatedly from the left and of the screen to the right endat a constant speed. Example: Setting “SCREEN WIPER” to “ON” On “SCREEN WIPER” of “LONG LIFE” menu, select“ON”. LONG LIFE ABL ORBIT...

Page 29 - Setting the screen size for S1/S2 video input; Option3 Settings Menu; Using the timer; PRESENT TIME; DAYLIGHT SAVING TIME:

English OSD (On Screen Display) Controls 22 En Setting the screen size for S1/S2 video input If the S-video signal contains screen size information, theimage will be automatically adjusted to fit the screen whenthis S1/S2 is set to AUTO.This feature is available only when an S-video signal isinput v...

Page 30 - Setting the power on mode; Enabling/disabling the front panel controls

English OSD (On Screen Display) Controls 23 En PROGRAM TIMER This sets the day and time at which the power will beswitched ON/OFF as well as the input mode. Example: Setting so that the power will be switchedon at 8:30 A.M., Monday, displaying PC2 source, andswitched off at 10:30 A.M. On “PROGRAM” o...

Page 31 - Example: Setting “OFF”; Loop Out setting; Example: Setting “ON”; ID number setting; To set the ID number for the remote control; To reset back to ALL; Video Wall setting; A contingency method of shutting off the electric

English OSD (On Screen Display) Controls 24 En Enabling/disabling remote control wirelesstransmission This function enables/disables remote control wirelesstransmission. Example: Setting “OFF” Set “ADVANCED OSD” to “ON” in the main menu (1/2), then perform the following operations. On “IR REMOTE” of...

Page 33 - SCREEN; ABL LINK; The remote control can be operated unless the

English OSD (On Screen Display) Controls 26 En SCREEN The position of the image can be adjusted and flickeringof the image can be corrected. Example: Adjusting the vertical position On “VIDEO WALL” menu, select “SCREEN”, then pressthe MENU/SET button.The “SCREEN” screen appears.On “V.POSITION” of “S...

Page 34 - REPEAT TIMER; Advanced OSD Settings Menu; Setting the menu mode; Color System Settings Menu; Setting the video signal format; Example: Setting the color system to “3.58 NTSC”; Source Information Menu

English OSD (On Screen Display) Controls 27 En REPEAT TIMER Use this to set two timers. Each timer can use theDIVIDER, SOURCE and WORK TIME functions.Turn on the AUTO ID and set the DIVIDER (at 1, 4 or 9)before the following operations. Example: TIMER1...VIDEO1 will be displayed for 3 minutes.TIMER2...

Page 35 - Pin Assignments

English 28 En 5 4 3 2 1 15 14 13 12 11 10 9 8 7 6 PC 1 Signal (Analog) RedGreen or sync-on-greenBlueNo connectionGroundRed groundGreen groundBlue groundNo connectionSync signal groundNo connectionBi-directional DATA (SDA)Horizontal sync or Composite syncVertical syncData clock Pin No. 123456789 10 1...

Page 36 - Table of Signals Supported; Supported resolution; Computer input signals supported by this system

English 29 En Table of Signals Supported Table of Signals Supported Supported resolution • When the screen mode is NORMAL, each signal is converted to a 640 dots 480 lines signal. (Except for * 2, * 4 ) • When the screen mode is FULL, each signal is converted to a 853 dots 480 lines signal. (Except ...

Page 37 - RGB mode prepared for the input signals listed in the table above.

English 30 En Table of Signals Supported *1 Only when using a graphic accelerator board that is capable of displaying 852 480. *2 Display only 400 lines with the screen center of the vertical orientation located at the center.*3 The picture is displayed in the original resolution. The picture will b...

Page 38 - Remedy; Troubleshooting

English 31 En Troubleshooting Remedy • If there are no abnormalities in the image and sound, the noise is caused by the cabinet reacting tochanges in temperature. This will not affectperformance. • Leave some space between the display and the connected components. • Replace both batteries with new o...

Page 39 - Specifications; Compatable with HDCP.

English 32 En Specifications Screen Size 36.3"(H) 20.4"(V) inches 921(H) 518(V) mm diagonal 42" Aspect Ratio 16 : 9 Resolution 853(H) 480(V) pixels Signals Synchronization Range Horizontal : 15.5 to 110 kHz(automatic : step scan)Vertical : 50.0 to 120 Hz(automatic : step scan) Input Sign...