Pioneer P7000BT - Manuals - manualsarea.com

Page 2 - After you have finished reading the instructions, keep this man-; Contents

Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operateyour model properly. After you have finished reading the instructions, keep this man- ual in a safe place for future reference. Before You Start Information to User 5 For Canadi...

Page 5 - Information to User; For Canadian model; Before

Information to User FCC ID: AJDK016MODEL NO.: DEH-P7000BTIC: 775E-K016This device complies with Part 15 of FCC Rulesand RSS-Gen of IC Rules. Operation is subjectto the following two conditions: (1) this devicemay not cause interference, and (2) this devicemust accept any interference, including inte...

Page 6 - WARNING; CAUTION; About WMA

WARNING Handling the cord on this product or cords asso-ciated with accessories sold with the productmay expose you to chemicals listed on proposi-tion 65 known to the State of California and othergovernmental entities to cause cancer and birthdefects or other reproductive harm. Wash hands after han...

Page 8 - Visit our website; Visit us at the following site:; In case of trouble; The front panel can be detached to deter theft.; Removing the front panel; Press OPEN to open the front panel.

CAUTION ! Pioneer accepts no responsibility for data loston the USB portable audio player/USB mem-ory even if that data is lost while using thisunit. ! Pioneer accepts no responsibility for data loston the iPod even if that data is lost whileusing this unit. After-sales service forPioneer products P...

Page 9 - Attaching the front panel; Reattach the front panel by holding it; Resetting the microprocessor; If the unit fails to operate properly; Installing the battery

3 Put the front panel into the provided protective case for safe keeping. Attaching the front panel % Reattach the front panel by holding it upright to the unit and clipping it securelyinto the mounting hooks. Resetting the microprocessor The microprocessor must be reset under thefollowing condition...

Page 10 - Using the remote control

! If the battery leaks, wipe the remote controlcompletely clean and install a new battery. ! When disposing of used batteries, complywith governmental regulations or environmen-tal public institutions ’ rules that apply in your country/area. ! “ Perchlorate Material – special handling may apply.See ...

Page 11 - Head unit; Press to select different displays.; c b; Operating this unit; Operating

What ’ s What Head unit 1 SRC/OFF button This unit is turned on by selecting a source.Press to cycle through all the availablesources. 2 DISP/SCROLL button Press to select different displays. 3 OPEN button Press to open the front panel. 4 LIST button Press to display the disc title list, track title...

Page 12 - Remote control; Using the; a b

a MUTE/HOLD button Press to turn off the sound. To turn on thesound, press again.While talking on the phone, press to put thecall on hold. b MULTI-CONTROL Move to perform manual seek tuning, fastforward, reverse and track search controls.Also used for controlling functions.Turn to increase or decrea...

Page 13 - Display indication; Main display section

Display indication 1 Main display section Displays band, frequency, elapsed playbacktime and other settings. ! TunerBand and frequency are displayed. ! Bulit-in CD player, USB, iPodElapsed playback time and literal infor-mation are displayed. 2 LOC indicator Appears when local seek tuning is on. 3 5...

Page 14 - Basic Operations; Turning the unit on; Press SRC to turn the unit on.; Turning the unit off; Press OFF and hold until the unit turns; Selecting a source; Press SRC repeatedly to switch be-; Adjusting the volume; Use MULTI-CONTROL to adjust the

Basic Operations Power ON/OFF Turning the unit on % Press SRC to turn the unit on. Turning the unit off % Press OFF and hold until the unit turns off. Selecting a source You can select a source you want to listen to.To switch to the built-in CD player, load a discin the unit (refer to page 16). % Pr...

Page 15 - Tuner; Press; Push

Tuner Basic Operations % Select a band Press BAND/ESC . # Band can be selected from among FM1 , FM2 , FM3 or AM . % Manual tuning (step by step) Push MULTI-CONTROL left or right. % Seek tuning Push and hold MULTI-CONTROL left or right, and then release. # You can cancel seek tuning by pushing MULTI-...

Page 16 - Tuning in strong signals; Introduction to advanced operations

1 Display the function menu. Refer to Introduction to advanced operations on the previous page. 2 Use MULTI-CONTROL to select BSM in the function menu. 3 Press MULTI-CONTROL to turn BSM on. The six strongest broadcast frequencies arestored in the order of their signal strength. # To cancel, press MU...

Page 17 - Selecting a track directly; Press 0 to 9 to enter the desired track; Press DISP to select the desired text in-

# If you have switched between compressed audio and CD-DA, playback starts at the firsttrack on the disc. Notes ! The built-in CD player can play back audio CDand compressed audio recorded on a CD-ROM. (Refer to page 72 for files that can beplayed back.) ! Read the precautions for discs and player o...

Page 18 - Turn to change the track title. Press to play.; Turn to change the name of file or folder.; Selecting a repeat play range; Refer to

Selecting tracks from the tracktitle list Track title list lets you see the list of track titleson a CD TEXT disc and select one of them toplay back. 1 Press LIST to switch to the track title list mode. 2 Use MULTI-CONTROL to select the de- sired track title. Turn to change the track title. Press to...

Page 19 - Playing tracks in random order; Scanning folders and tracks; Pausing playback; Using Sound Retriever; Using disc title functions

2 Use MULTI-CONTROL to select REPEAT in the function menu. 3 Press MULTI-CONTROL to select the de- sired setting. ! DISC – Repeat all tracks ! TRACK – Repeat the current track ! FOLDER – Repeat the current folder # If you select another folder during repeat play, the repeat play range changes to dis...

Page 20 - Entering disc titles

Entering disc titles Use the disc title input feature to store up to48 CD titles in the unit. Each title can be up to10 characters long. 1 Display the function menu. Refer to Introduction to advanced operations on page 18. 2 Play the CD that you want to enter a title for. 3 Use MULTI-CONTROL to sele...

Page 22 - Function and operation; REPEAT; Playing songs on iPod; compatibility on page 7.; Fast forward or reverse; Browsing for a song; Searching songs by category

Function and operation REPEAT , RANDOM , SCAN , PAUSE and S. RTRV operations are basically the same as that of the built-in CD player. Function name Operation REPEAT Refer to Selecting a repeat play range on page 18. However, the repeat play rangesyou can select are different fromthat of the built-i...

Page 23 - Searching songs by alphabet

2 Use MULTI-CONTROL to select a cate- gory. Turn to change the category; press to select. PLAYLISTS (playlists) — ARTISTS (artists) — ALBUMS (albums) — SONGS (songs) — PODCASTS (podcasts) — GENRES (genres) — COMPOSERS (composers) — AUDIOBOOKS (audiobooks)List for the selected category is displayed. ...

Page 25 - Operate the connected iPod to select a; Changing audiobook speed; Display the function menu.; Bluetooth Audio; Entering PIN code for Blue-

— iPod fifth generation (software version 1.2.1) This unit ’ s iPod function can be operated from your iPod. Sound can be heard from car ’ s speaker, and operation can be conducted fromyour iPod. ! While this function is in use, even if theignition key is turned off, iPod is not turnedoff. To turn o...

Page 27 - Stopping playback

Basic Operations % Fast forward or reverse Push and hold MULTI-CONTROL left or right. % Select a track Push MULTI-CONTROL left or right. Note Even though your audio player does not contain aBluetooth module, you can still control it fromthis unit via Bluetooth wireless technology. Tocontrol your aud...

Page 28 - Bluetooth Telephone; Setting up for hands-free phoning; Connecting and disconnecting

3 Press MULTI-CONTROL to turn auto- matic connection on. If your Bluetooth audio player is ready forBluetooth wireless connection, connection tothis unit is automatically established. # To turn automatic connection off, press MULTI-CONTROL again. Displaying BD (BluetoothDevice) address This unit dis...

Page 29 - If the phone is not connected but paired; Introduction of connection and regis-

# If the difference between the ring volume and caller ’ s voice volume is big, overall volume level may become unstable. # Before disconnecting the cellular phone from this unit, make sure to adjust the volume to aproper level. If the volume is muted (zero level) onyour cellular phone, the volume l...

Page 30 - Transferring entries to the; Using this unit to initiate a connection

5 Select PAIRE FROM PHONE and then press MULTI-CONTROL to ready for pairing.READY will be displayed. 6 Use your cellular phone to establish connection. PIN code is set to 0000 as the default. You can change this code in the initial setting. Refer to Entering PIN code for Bluetooth wireless con-necti...

Page 31 - Connecting a paired cellular phone; Disconnecting a cellular phone

# If the connection fails, ERROR is displayed. In this case, check the cellular phone and try again. # If three cellular phones have already been paired, the pairing assignment selection displaywill appear. Select one assignment to pair thenew phone. The newly paired phone overwritesthe previously p...

Page 32 - Deleting a registered phone; Making a phone call; Dial a number

3 Push MULTI-CONTROL up or down to select a pairing assignment.1 (user phone 1) — 2 (user phone 2) — 3 (user phone 3) # Push MULTI-CONTROL left or right to switch the BD address and device name. # If a phone is already assigned to the user phone number, the new phone will overwrite theold one. # As ...

Page 33 - Taking a phone call; Answering or rejecting an incoming call; Operating a call waiting; Using the phone number list

Taking a phone call Answering or rejecting an incoming call % Answering an incoming call When a call comes in, press MULTI-CONTROL . # You can also take a phone call by pressing OFF HOOK on the remote control. % End a call Press . # You can also end the call by pressing ON HOOK on the remote control...

Page 34 - Using the call history; Using the phone book; Downloading phone books from your; Calling a number in the phone book

# If no phone numbers are stored in the se- lected list, NO DATA is displayed. Using the call history The 20 most recent calls dialed, received, andmissed are stored in the call history. You canbrowse the call history and call numbers fromit. 1 Press LIST to display RECENT CALLS (call history list)....

Page 36 - Using preset numbers; Assigning preset numbers; Deleting preset numbers

5 Press MULTI-CONTROL to delete the Phone Book entry. The Phone Book entry is deleted and CLEARED is displayed. The display returns to Phone Book entry list. Using preset numbers Numbers that you dial frequently can be as-signed to presets for quick recall. Assigning preset numbers 1 Press LIST to d...

Page 37 - Calling a number in the preset list; Assigning preset numbers by using; Assigning

3 Press MULTI-CONTROL to select a preset phone number that you want to delete. 4 Press and hold MULTI-CONTROL to dis- play MEMORY. Push MULTI-CONTROL up or down to switch MEMORY (memory) and DELETE (delete). # About assigning , Assigning preset numbers on the previous page. 5 Select DELETE and then ...

Page 38 - Entering the ID and the password

3 Turn MULTI-CONTROL to select the function.PH BOOK DOWNLOAD (phone book down- load) — PH BOOK TRANSFER (phone book transfer) — AUTO CONNECT (automatic con- nection setting) — AUTO ANSWER (automatic answer setting) — ECHO CANCEL (echo can- cel) — RING TONE (ring tone select) — NUMBER DIAL (call by e...

Page 39 - Setting the automatic connection; Setting automatic answering; Echo canceling and noise reduction

3 Push MULTI-CONTROL left or right to move the cursor to the previous or nextcharacter position. 4 Press MULTI-CONTROL to determine the ID and the password. 5 After entering the ID and password, use your cellular phone to continue theprocedure. Transferring entries to thephone book Phone books in yo...

Page 40 - Switching the ring tone; Clearing memory

Switching the ring tone 1 Display the function menu. Refer to Introduction to advanced operations on page 37. 2 Use MULTI-CONTROL to select RING TONE in the function menu. 3 Push MULTI-CONTROL left or right to select the desired setting.OFF (off) — 1 — 2 — 3 Making a call by enteringphone number Imp...

Page 41 - Selecting menu language

Pressing MULTI-CONTROL repeatedly changes the name view order between firstand last name. Selecting menu language Menu language related to Bluetooth audio/tel-ephone can be changed. ! Some characters may not be displayedproperly. 1 Display the function menu. Refer to Introduction to advanced operati...

Page 42 - Using balance adjustment; Introduction of audio adjustments; Using the equalizer; Recalling equalizer curves; Audio Adjustments

Introduction of audioadjustments 1 Press MULTI-CONTROL to display the main menu. 2 Use MULTI-CONTROL to select AUDIO. Turn to change the menu option. Press to se-lect.The audio menu is displayed. 3 Turn MULTI-CONTROL to select the audio function. Turn MULTI-CONTROL to switch between the audio functi...

Page 43 - Adjusting equalizer curves; Recalling equalizer cur ves; Fine-adjusting equalizer curve; Center frequency; Adjusting loudness; Audio

! CUSTOM is an adjusted equalizer curve that you create. If you make adjustments toan equalizer curve, the equalizer curve set-ting is memorized in CUSTOM . ! When FLAT is selected, no supplement or correction is made to the sound. This isuseful to check the effect of the equalizercurves by switchin...

Page 44 - Using subwoofer output; Adjusting subwoofer settings; Using the high pass filter

4 Push MULTI-CONTROL left or right to select a desired level. Each time MULTI-CONTROL is pushed left or right, level is selected in the following order: LOW (low) — MID (mid) — HIGH (high) Using subwoofer output This unit is equipped with a subwoofer outputwhich can be turned on or off.Also, phase c...

Page 45 - Boosting the bass; Adjusting source levels

Boosting the bass Bass boost function boosts the bass level ofsound. 1 Display the audio menu. Refer to Introduction of audio adjustments on page 42. 2 Use MULTI-CONTROL to select BASS BOOST. 3 Push MULTI-CONTROL up or down to select a desired level.0 to +6 is displayed as the level is increased or ...

Page 46 - Setting the date; Adjusting initial settings; Setting the clock; Adjusting initial settings; Switching the warning tone; Adjusting initial settings; Initial Settings

Adjusting initial settings 1 Press SRC and hold until the unit turns off. 2 Press MULTI-CONTROL and hold until the initial setting menu appears in the dis-play. 3 Turn MULTI-CONTROL to select one of the initial settings.CLNDR (calendar) — CLOCK (clock) — WARNING (warning tone) — AUX1 (auxiliary inpu...

Page 47 - Switching the auxiliary setting; Using the AUX source; Initial

3 Press MULTI-CONTROL to turn warning tone on. # To turn warning tone off, press MULTI-CONTROL again. Switching the auxiliary setting Auxiliary devices connected to this unit can beactivated individually. Set each AUX source toON when using. For more information aboutconnecting or using auxiliary de...

Page 48 - Switching the ever scroll; Activating the

Setting the internal poweramplifier This unit features high power amplifier. How-ever, in particular system, external amplifiersare used instead of internal amplifier. If youuse external amplifiers in order to establish amulti-amp system, and don ’ t use internal am- plifier, it is recommended to tu...

Page 49 - Editing device name

# Pushing MULTI-CONTROL right in the confir- mation display returns you to the PIN code inputdisplay, and you can change the PIN code. Editing device name You can edit the device name.The device name is set to PIONEER FLAP BT as default. 1 Display the initial setting menu. Refer to Adjusting initial...

Page 50 - is displayed. Clearing memory

3 Push MULTI-CONTROL right to show a confirmation display.BT RESET :YES is displayed. Clearing memory is now on standby. # If you do not want to reset phone memory, press BAND/ESC . 4 Press MULTI-CONTROL to clear the memory. Updating the software aboutBluetooth connection This function is used to up...

Page 51 - About; Selecting AUX as the source; Setting the AUX title; tering disc titles; Using the external unit; Other

Using the AUX source Up to two auxiliary devices such as VCR orportable devices (sold separately) can be con-nected to this unit. When connected, auxiliarydevices are automatically read as AUX sourcesand assigned to AUX1 or AUX2 . The relation- ship between AUX1 and AUX2 sources is ex- plained below...

Page 52 - Using the PGM button

Basic operation Functions allocated to the following opera-tions are different depending on the con-nected external unit. For details concerningfunctions, refer to the connected externalunit ’ s owner ’ s manual. % Press BAND/ESC. % Press and hold BAND/ESC. % Push MULTI-CONTROL left or right. % Push...

Page 53 - Press PGM and hold to turn BSSM on; Other Functions

% Press PGM and hold to turn BSM on when selecting tuner or HD Radio as thesource. Press PGM and hold until the BSM turns on. # To cancel the storage process, press PGM again. % Press PGM and hold to turn BSSM on when selecting television as the source. Press PGM and hold until the BSSM turns on. # ...

Page 54 - Basic operation; Displaying text information on iPod; Available accessories

Playing songs on iPod Basic operation You can use this unit to control an interfaceadapter for iPod, which is sold separately. % Fast forward or reverse Push and hold MULTI-CONTROL left or right. % Select a track Push MULTI-CONTROL left or right. Notes ! Read the precautions for iPod on page 74. ! W...

Page 55 - XM tuner; Listening to XM Satellite Radio; Selecting an XM channel directly; Press 0 to 9 to enter the desired channel; Switching the XM display; Press DISP to switch the XM display.; lected station in memory.; vailable

Playing songs in a randomorder (shuffle) % Press repeatedly to select the de- sired setting. ! SONGS – Play back songs in the selected list in random order. ! ALBUMS – Play back songs from a ran- domly selected album in order. ! OFF – Cancel random play. # To turn shuffle off, press again. Note You ...

Page 56 - (channel category select; Displaying the Radio ID; Channel number select setting; SIRIUS Satellite Radio tuner; Listening to SIRIUS Satellite Radio

# You can also change the station by pushing MULTI-CONTROL up or down. # If you do not operate the list within about 30 seconds, the display is automatically returned tothe ordinary display. Using the remote control % When you find a station that you want to store in memory, press one of presettunin...

Page 57 - Selecting a SIRIUS channel directly; Switching the SIRIUS display

% Select a channel. Push MULTI-CONTROL left or right. # If you push and hold MULTI-CONTROL left or right, you can increase or decrease channel num-ber continuously. # You can also perform tuning from a desired channel category. (Refer to Selecting a channel in the channel categor y on the next page....

Page 58 - Selecting the SIRIUS channel select; Using the Game Alert function; Selecting teams for Game Alert; Introduction of advanced operations

Notes ! You can also select the function by pressing FUNCTION on the remote control. ! To return to the ordinary display, press BAND/ESC . ! If you do not operate functions within about30 seconds, the display is automatically re-turned to the ordinary display. ! During the Instant Replay mode, you c...

Page 59 - Switching the Game Alert on or off; Displaying game information

Switching the Game Alert on or off Once you made team selections, you need toturn the Game Alert function on. ! The Game Alert function is on at the defaultsetting. 1 Display the function selection menu. Refer to Introduction of advanced operations on page 57. 2 Use MULTI-CONTROL to select GAME ALER...

Page 60 - HD Radio tuner; Switching the display

% Select a track Push MULTI-CONTROL left or right. % Fast forward or reverse Push and hold MULTI-CONTROL left or right for about one second and release. HD Radio tuner Basic Operations You can use this unit to control an HD Radiotuner (GEX-P10HD), which is sold separately. For details concerning ope...

Page 61 - Switching the seek mode; Switching the reception mode

Introduction to advancedoperations 1 Press MULTI-CONTROL to display the main menu. 2 Use MULTI-CONTROL to select FUNCTION. Turn to change the menu option. Press to se-lect.The function menu is displayed. 3 Turn MULTI-CONTROL to select the function.BSM (best stations memory) — LOCAL (local seek tunin...

Page 62 - Using CD TEXT functions; Displaying text information on disc; and

! For discs 7 to 12, press and hold the corre-sponding numbers, such as 1 for disc 7, until the disc number appears in the dis-play. % Fast forward or reverse Push and hold MULTI-CONTROL left or right. % Select a track Push MULTI-CONTROL left or right. Notes ! When multi-CD player completes preparat...

Page 63 - Using ITS playlists; Creating a playlist with ITS programming; Playback from your ITS playlist

PAUSE Refer to Pausing playback on page 19. TITLE INPUT Refer to Entering disc titles on page 20. Notes ! You can also select the function by pressing FUNCTION on the remote control. ! To return to the playback display, press BAND/ESC . ! If you select other discs during repeat play,the repeat play ...

Page 64 - Erasing a track from your ITS playlist; Erasing a CD from your ITS playlist

2 Display the function menu. Refer to Introduction to advanced operations on page 62. 3 Use MULTI-CONTROL to select ITS PLAY in the function menu. 4 Press MULTI-CONTROL to turn ITS play on.ITS PLAY : ON appears in the display. Playback begins of those tracks from your playlist withinthe previously s...

Page 65 - Displaying disc titles; Selecting discs from the disc title list; DVD Player

Displaying disc titles You can display the text information of anydisc that has the disc title entered.The operation is the same as that of the built-in CD player.Refer to Displaying text information on disc on page 17. Selecting discs from the disc title list Disc title list lets you see the list o...

Page 67 - TV tuner; Select a band; When you find a station that you want

! When playing back compressed audio, if youselect another folder during repeat play, therepeat play range changes to DISC . ! When playing back compressed audio, if youperform track search or fast forward/reverseduring TRACK , the repeat play range changes to FOLDER . ! Multi-DVD player that has IT...

Page 69 - Troubleshooting; Error messages; Additional Information; Additional

Troubleshooting Bluetooth audio/telephone Symptom Cause Action The audio ofthe Bluetoothaudio source isnot playedback. A Bluetooth-con-nected cellularphone is cur-rently in a phonecall. The audio will beplayed back whenthe call is com-pleted. A Bluetooth-con-nected cellularphone is cur-rently in ope...

Page 71 - Dual Discs; WMA

Handling guideline of discsand player ! Use only discs featuring either of followingtwo logos. ! Use only conventional, fully circular discs.Do not use shaped discs. ! Use 12-cm or 8-cm CD. Do not use anadapter when playing 8-cm CDs. ! Do not insert anything other than a CD intothe CD loading slot. ...

Page 72 - Example of a hierarchy

! MP3i (MP3 interactive), mp3 PRO: No AAC ! Compatible format: AAC encoded byiTunes ® ! Sampling frequency: 11.025 kHz to 48 kHz ! Transmission rate: 16 kbps to 320 kbps ! AAC file bought on the iTunes Store (.m4pfile extension): No ! Apple Lossless: No WAV ! Compatible format: Linear PCM (LPCM),MS ...

Page 73 - File extensions must be used properly.

Notes ! Partitioned USB memory is not compatiblewith this unit. ! Depending on the kind of USB portable audioplayer/USB memory you use, this unit maynot recognize the USB audio player/USBmemory or audio files may not be played backproperly. ! This unit can play back files in the USB porta-ble audio ...

Page 74 - About handling the iPod; For details, refer to the iPod; About iPod settings; Bluetooth profiles

! 01 to 05 represent assigned folder num-bers. 1 to 6 represent the playback se- quence. The user cannot assign foldernumbers and specify the playback se-quence with this unit. ! Playback sequence of the audio file is thesame as recorded sequence in the USB de-vice. ! To specify the playback sequenc...

Page 75 - Specifications

Specifications General Power source ............................. 14.4 V DC (10.8 V to 15.1 V allowable) Grounding system ................... Negative typeMax. current consumption ..................................................... 10.0 A Dimensions (W × H × D): DIN Chassis ..................... 1...

Page 77 - PIONEER CORPORATION

PIONEER CORPORATION 4-1, MEGURO 1-CHOME, MEGURO-KUTOKYO 153-8654, JAPAN PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, BelgiumTEL: (0) 3/570.05.11 PIONEER ELECTRONICS ASIACENTRE ...