Pioneer DVH-P5850MP - Manuals

Black plate (7,1) <CRB2123-A/U>7 The illustration below shows the regions and corresponding region numbers. About this manual This unit features a number of sophisticated functions ensuring superior reception and op- eration. All the functions have been designed for the easiest possible use, b...

Black plate (8,1) <CRB2123-A/U>8 Dolby Digital/DTS compatibility ! Manufactured under license from Dolby La- boratories. Dolby , Pro Logic , and the double-D symbol are trademarks of Dolby Laboratories. ! DTS is a registered trademark of Digital Theater Systems, Inc. Multi-channel processor co...

Black plate (9,1) <CRB2123-A/U>9 What the marks on DVDs indicate The marks below may be found on DVD disc labels and packages. They indicate the type of images and audio recorded on the disc, and the functions you can use. Mark Meaning 2 Indicates the number of audio sys- tems. 2 Indicates the...

Black plate (10,1) <CRB2123-A/U>10 Using the remote control Point the remote control in the direction of the front panel to operate. ! The remote control may not function prop- erly in direct sunlight. Important ! Do not store the remote control in high tem-peratures or direct sunlight. ! Do n...

Black plate (11,1) <CRB2123-A/U>11 Head unit 1 DISPLAY button This button is only available on the head unit. Press to select different displays. 2 VOLUME When you press VOLUME , it extends out- ward so that it becomes easier to turn. To re- tract VOLUME , press it again. Rotate it to increase...

Black plate (12,1) <CRB2123-A/U>12 b EQ button This button is only available on the head unit. Press to select various equalizer curves. c SOURCE button This unit is turned on by selecting a source. Press to cycle through all the available sources. Remote control 1 Remote control selection swi...

Black plate (15,1) <CRB2123-A/U>15 Using the remote control operation mode switch There are two remote control operation modes on the remote control. If you want to operate this unit by remote control, turn the mode switch to DVH mode. In this case, both the head unit s buttons and remote cont...

Black plate (16,1) <CRB2123-A/U>16 When the AUX (auxiliary input) is set to off(refer to page 80). ! External unit refers to a Pioneer product (suchas one available in the future) that, althoughincompatible as a source, enables control ofbasic functions by this unit. Two external unitscan be c...

Black plate (17,1) <CRB2123-A/U>17 Protecting your unit from theft The front panel can be detached from the head unit and stored in the protective case provided to discourage theft. ! If the front panel is not detached from the head unit within five seconds of turning off the ignition, a warni...

Black plate (18,1) <CRB2123-A/U>18 Listening to the radio 2 1 3 5 4 4 4 These are the basic steps necessary to operate the radio. More advanced tuner operation is explained starting on the next page. 1 Band indicator Shows which band the radio is tuned to, AM or FM. 2 Signal level indicator Sh...

Black plate (21,1) <CRB2123-A/U>21 Watching a DVD video 1 4 2 2 2 5 3 3 3 6 6 Head unit s display 2 2 2 6 3 3 3 1 1 1 When the separately sold display is connected to this unit, the listed information will appear on it. Information display These are the basic steps necessary to play a DVD vide...

Black plate (22,1) <CRB2123-A/U>22 4 To skip back or forward to another chapter, press o or p . Pressing p skips to the start of the next chapter. Pressing o once skips to the start of the current chapter. Pressing again will skip to the previous chapter. Chapter numbers are displayed for eigh...

Black plate (23,1) <CRB2123-A/U>23 Frame-by-frame playback This lets you move ahead one frame at a time during playback. % Press r . Each time you press r , you move ahead one frame. # To return to normal playback, press f . Notes ! There is no sound during frame-by-frame play-back. ! Dependin...

Black plate (24,1) <CRB2123-A/U>24 Notes ! The number in the 2 mark on a DVD s pack- age indicates the number of recorded lan-guages/audio systems. ! With some DVDs, switching between lan-guages/audio systems may only be possibleusing a menu display. ! You can also switch between languages/aud...

Black plate (25,1) <CRB2123-A/U>25 Notes ! The 3 mark on a DVD s package indicates it features multi-angle scenes. The number inthe 3 mark indicates the number of angles from which scenes were shot. ! Pressing ANGLE during fast forward/fast re- verse, pause or slow motion playback returnsyou t...

Black plate (26,1) <CRB2123-A/U>26 Searching for a desired scene, starting playbackfrom a specified time You can use the search function to search for a desired scene by specifying a title or chapter, and the time search function to specify the time on a disc at which play starts. 1 Move the j...

Black plate (27,1) <CRB2123-A/U>27 ! You can also switch settings by inputtingnumbers with NUMBER . ! Display indications such as Dolby D and 5.1ch indicate the audio system recorded on the DVD. Depending on the setting, playbackmay not be with the same audio system asthat indicated. Selecting...

Black plate (28,1) <CRB2123-A/U>28 Operating from the function display 1 1 1 2 The following functions can also be operated from the head unit s display. 1 Function display Shows the function status. 2 RPT indicator Shows when repeat range is selected to cur- rent chapter. % Press F to display...

Black plate (29,1) <CRB2123-A/U>29 Watching a Video CD 1 1 1 2 2 2 3 3 3 Head unit s display 3 3 3 2 2 2 1 1 1 When the separately sold display is connected to this unit, the listed information will appear on it. Information display These are the basic steps necessary to play a Video CD with y...

Black plate (30,1) <CRB2123-A/U>30 # If the remote control is set to DVH mode, o and p are assigned to other functions. Use m and n instead for the DVD mode functions controlled by o and p . 4 To stop playback, press g . # When you stop Video CD playback by pressing g , that location on the di...

Black plate (33,1) <CRB2123-A/U>33 Operating from the function display 1 1 1 2 2 2 Repeat and pause functions can also be oper- ated from the head unit s display. 1 Function display Shows the function status. 2 RPT indicator Shows when repeat play is turned on. % Press F to display the functio...

Black plate (34,1) <CRB2123-A/U>34 Listening to a CD 1 1 1 3 2 2 Head unit s display 1 1 1 3 3 3 2 2 2 When the separately sold display is connected to this unit, the listed information will appear on it. Information display These are the basic steps necessary to play a CD with your DVD player...

Black plate (35,1) <CRB2123-A/U>35 Operating from the information display 1 1 1 This display lets you use the search function to specify a track to search for desired track, select the range for repat play, and switch ran- dom play and scan play on or off. 1 Information display Shows the funct...

Black plate (36,1) <CRB2123-A/U>36 3 When you find the desired track, move the joystick up or down to cancel the scan play. Note After scanning of a CD is finished, normal play- back of the tracks will begin again. Pausing CD playback Pause lets you temporarily stop disc playback. % Press f du...

Black plate (37,1) <CRB2123-A/U>37 Operating from the function display 1 1 1 2 2 2 The following functions can also be operated from the head unit s display. 1 Function display Shows the function status. 2 RPT indicator Shows when repeat play is turned on. % Press F to display the function nam...

Black plate (38,1) <CRB2123-A/U>38 3 When you find the desired track press q to turn scan play off. SCAN :OFF appears in the display. The track will continue to play. # If the display has automatically returned to the playback display, select SCAN again by press- ing F . Note After scanning of...

Black plate (39,1) <CRB2123-A/U>39 6 Press BAND to return to the playback display. Notes ! Titles remain in memory, even after the dischas been removed from the unit, and are re-called when the disc is reinserted. ! After data for 48 discs has been stored inmemory, data for a new disc will ove...

Black plate (40,1) <CRB2123-A/U>40 Listening to MP3/WMA 1 1 1 3 4 4 4 2 Head unit s display 4 4 4 3 3 3 2 2 2 5 5 5 When the separately sold display is connected to this unit, the listed information will appear on it. Information display These are the basic steps necessary to play an MP3/WMA w...

Black plate (45,1) <CRB2123-A/U>45 Note If you turn random play on during FLD and then return to the playback display, FRDM appears in the display. Scanning folders and tracks While you are using FLD , the beginning of each track in the selected folder plays for about 10 seconds. When you are ...

Black plate (46,1) <CRB2123-A/U>46 2 Press and hold m or n to search every 10 tracks in the current folder. # If the current folder contains less than 10 tracks, pressing and holding n recalls the last track of the folder. Also, if the remaining numberof tracks after searching every 10 tracks ...

Black plate (47,1) <CRB2123-A/U>47 Playing a CD 1 1 1 2 2 2 3 You can use this unit to control a multi-CD player, which is sold separately. These are the basic steps necessary to play a CD with your multi-CD player. More advanced CD operation is explained starting on the next page. 1 Disc numb...

Black plate (48,1) <CRB2123-A/U>48 Note After entering the number input mode, if you donot perform an operation within about eight sec-onds, the mode is automatically canceled. 50-disc multi-CD player Only those functions described in this manual are supported by 50-disc multi-CD players. This...

Black plate (49,1) <CRB2123-A/U>49 2 Press m or n to select the repeat range. Press m or n until the desired repeat range appears in the display. ! MCD Repeat all discs in the multi-CD player ! TRK Repeat just the current track ! DSC Repeat the current disc Notes ! If you select other discs du...

Black plate (50,1) <CRB2123-A/U>50 2 Press r to turn pause on. PAUSE:ON appears in the display. Play of the current track pauses. 3 Press q to turn pause off. PAUSE:OFF appears in the display. Play will re- sume at the same point that you turned pause on. Note Press f on the remote control rep...

Black plate (51,1) <CRB2123-A/U>51 Erasing a trackfrom your ITS playlist To delete a track from your ITS playlist, make sure ITS play is on. If ITS play is already on, skip to step 2. 1 Play the CD that contains the track you want to delete from your ITS playlist and turn ITS play on. Refer to...

Black plate (52,1) <CRB2123-A/U>52 3 Press r or q to select aletter of the alphabet. Each press of r will display a letter of the al- phabet in A B C ... X Y Z , numbers and sym- bols in 1 2 3 ... > [ ] order. Each press of q will display a letter in the reverse order, such as Z Y X ... C B...

Black plate (53,1) <CRB2123-A/U>53 Play time DISC TTL (disc title) ART NAME (disc artist name) TRK TTL (track title) ART NAME (track artist name) # If specific information has not been recorded on a CD TEXT disc, NO XXXX will be displayed (e.g., NO T-TTL ). Scrolling text information in the di...

Black plate (54,1) <CRB2123-A/U>54 Introduction of audio adjustments 1 1 4 7 2 2 23 3 3 5 5 5 6 6 6 1 Preset equalizer indicator Shows which equalizer preset is currently selected. When CUSTOM is selected, equalizer curve does not display. 2 SFEQ indicator Appears in the display when SFEQ func...

Black plate (55,1) <CRB2123-A/U>55 Using the equalizer The equalizer lets you adjust the equalization to match car interior acoustic characteristics as desired. There are six stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves: Display Equali...

Black plate (56,1) <CRB2123-A/U>56 FRT1-H (front 1-high) FRT1-L (front 1-low) FRT2-H (front 2-high) FRT2-L (front 2-low) CUSTOM (custom) SFEQ OFF (off) 3 Press m or n to select the desired position. Press m or n until the desired position ap- pears in the display. L (left) C (center) R (right)...

Black plate (57,1) <CRB2123-A/U>57 Fine-adjusting equalizer curve You can adjust the center frequency and the Q factor (curve characteristics) of each currently selected curve band ( EQ-L / EQ-M / EQ-H ). Level (dB) Center frequency Q=2N Q=2W Frequency (Hz) 1 Press A and hold until frequency a...

Black plate (58,1) <CRB2123-A/U>58 Selecting bass frequency You can select the bass frequency for level ad- justment. 1 Press A and hold until frequency and the Q factor (e.g., F- 80:Q1W) appears in the display. 2 Press A to select B. Press A until B appears in the display. 3 Press m or n to s...

Black plate (59,1) <CRB2123-A/U>59 1 Press A to select 80: 0. Press A until 80: 0 appears in the display. # When the subwoofer output is on, you can se- lect 80: 0 . # If the subwoofer setting has been previously adjusted, the frequency of that previously se-lected will be displayed instead of...

Black plate (60,1) <CRB2123-A/U>60 50 80 125 (Hz) Only frequencies higher than those in the se- lected range are outputted from the front or rear speakers. Note If you switch the SFEQ setting, the HPF functionis automatically turned off. By turning the HPFfunction on after selecting the SFEQ s...

Black plate (61,1) <CRB2123-A/U>61 Introduction of DSP adjustments Important Following functions are effective only when youconnected a Pioneer multi-channel processor(DEQ-P7650) to this unit. By carrying out the following settings/adjust- ments in the order shown, you can create a fi- nely-tu...

Black plate (62,1) <CRB2123-A/U>62 Operating the DSP details menu 1 2 1 DSP display Shows the DSP status. 2 PL II indicator Shows when the Dolby Pro Logic II is turned on. % Press A and hold until FRONT appears in the display, then press A to display the DSP function names. After FRONT is disp...

Black plate (63,1) <CRB2123-A/U>63 Using the position selector One way to assure a more natural sound is to accurately position the stereo image, putting you right in the center of the sound field. The position selector function lets you automati- cally adjust the speaker output levels and in-...

Black plate (64,1) <CRB2123-A/U>64 2 Press A to select SLA. Press A until SLA appears in the display. 3 Press r or q to adjust the source vo- lume. Each press of r or q increases or de- creases the source volume. SLA : +4 SLA : 4 is displayed as the source volume is increased or decreased. Not...

Black plate (65,1) <CRB2123-A/U>65 2 Press m or n to switch the down mix settings. ! Lt/Rt Down mix so that the surround components can be restored (decoded). ! Lo/Ro Stereo mix the original audio that do not contain channel modes such as sur-round components. Using the Dolby Pro Logic II Only...

Black plate (66,1) <CRB2123-A/U>66 Setting the speaker setting You need to make with/without (or yes/no) and size (bass reproducing capacity) selection/ad- justments depending on the installed speak- ers. The size needs to be set to LRG (large) if the speaker is capable of reproducing sounds o...

Black plate (67,1) <CRB2123-A/U>67 ! No audio is outputted if the center speakersetting is SML or LRG and no center speaker is installed. ! Audio is heard only over the center speaker ifinstalled and the center speaker setting is SML or LRG . Selecting a cross-over frequency You can select a f...

Black plate (68,1) <CRB2123-A/U>68 Adjusting the speaker output levels using a test tone A convenient test tone allows you to easily get the overall balance right among the speakers. 1 Press A and hold until FRONT appears in the display, then press A to select T TONE. After FRONT is displayed,...

Black plate (69,1) <CRB2123-A/U>69 Adjusting the time alignment By adjusting the distance between each speaker and a selected listening position, you can insert delay times into the speaker output to obtain a correct sound image and overall level balance. Although this is automatically achieve...

Black plate (70,1) <CRB2123-A/U>70 When speakers are incorrectly connected.(e.g., When a rear speaker is connected toa subwoofer output.) When a speaker is connected to a poweramp delivering output higher than thespeaker s maximum input power capabil- ity. ! If the microphone is placed in an u...

Black plate (71,1) <CRB2123-A/U>71 Carrying out auto TA and EQ 1 Stop the car in a place that is as quiet as possible, close all doors, windows and the sun roof, and then turn the engine off. If the engine is left running, engine noise may prevent correct auto TA and EQ. 2 Fix the supplied mic...

Black plate (72,1) <CRB2123-A/U>72 12 Store the microphone carefully in the glove compartment. Store the microphone carefully in the glove compartment or any other safe place. If the microphone is subjected to direct sunlight for an extended period, high temperatures may cause distortion, colo...

Black plate (75,1) <CRB2123-A/U>75 ! You can also switch the subtitle language dur-ing playback with SUBTITLE (S.TITILE) . (Refer to Changing the subtitle language during play- back (Multi-subtitle) on page 24.) ! Even if you use SUBTITLE (S.TITILE) to switch the subtitle language, this does n...

Black plate (76,1) <CRB2123-A/U>76 4 Click the joystick. The menu language is set. Notes ! If the selected language is not recorded onthe disc, the language specified on the disc isoutputted. ! Pressing RETURN takes you back to the pre- vious display. ! If you have selected GENERAL , refer to ...

Black plate (77,1) <CRB2123-A/U>77 4 Click the joystick. The selected TV aspect is set. Notes ! When playing discs that do not specify PANSCAN , playback is with LETTER BOX even if you select PANSCAN setting. Confirm whether the disc package bears the 16 : 9 LB mark. (See page 9.) ! Some discs...

Black plate (78,1) <CRB2123-A/U>78 3 Press NUMBER buttons to input the re- gistered code number. 4 Click the joystick. This enters the code number, and you can now change the level. # If you input an incorrect code number, the icon is displayed. Press CLEAR and input the correct code number. #...

Black plate (79,1) <CRB2123-A/U>79 Adjusting initial settings 1 Using the initial settings, you can customize various system settings to achieve optimal per- formance from this unit. 1 Function display Shows the function status. 1 Press SOURCE and hold until the unit turns off. 2 Press F and h...

Black plate (80,1) <CRB2123-A/U>80 Note If seek tuning is performed in 50 kHz steps, sta-tions may be tuned in imprecisely. Tune in the sta-tions with manual tuning or use seek tuningagain. Setting the AM tuning step The AM tuning step can be switched between 9 kHz, the preset step, and 10 kHz...

Black plate (81,1) <CRB2123-A/U>81 Setting the rear output and subwoofer controller This unit s rear output (rear speaker leads out- put) can be used for full-range speaker ( R-SP :FUL ) or subwoofer ( R-SP :S/W ) connec- tion. If you switch the rear output setting to R-SP :S/W , you can conne...

Black plate (82,1) <CRB2123-A/U>82 Switching the automatic disc playback You can turn automatic disc playback on or off when you insert a disc into the disc loading slot. When this function is on, the disc will be automatically played after it is inserted into the disc loading slot. Initially,...

Black plate (83,1) <CRB2123-A/U>83 Turning the clockdisplay on or off You can turn the clock display on or off. % Press CLOCK to turn the clock display on or off. Each press of CLOCK turns the clock display on or off. # The clock display disappears temporarily when you perform other operations...

Black plate (84,1) <CRB2123-A/U>84 4 Move the cursor to the last position by pressing n after entering the title. When you press n one more time, the en- tered title is stored in memory. 5 Press BAND to return to the playback display. Switching between digital and analog When this unit is conn...

Black plate (85,1) <CRB2123-A/U>85 Notes ! When using this unit with multi-DVD player,you can switch to ITS-P . ! Repeat play function is different depending onthe disc types. During DVD playback, press m or n to select the repeat range. During Video CD or CD playback, press r or q to turn rep...

Black plate (86,1) <CRB2123-A/U>86 Troubleshooting Common Symptom Cause Action (See) Power doesn t turn on. The unit doesn t operate. Leads and connectors are incor- rectly connected. Confirm once more that all connections are correct. The fuse is blown. Rectify the reason for the fuse blowing...

Black plate (87,1) <CRB2123-A/U>87 Symptom Cause Action (See) When the ignition switch is turned ON (or turned to ACC), the motor sounds. The unit is confirming whether a disc is loaded or not. This is a normal operation. Problems duringDVD playback Symptom Cause Action (See) Playback is not p...

Black plate (89,1) <CRB2123-A/U>89 Message Cause Action (See) NON-PLAY The disc does not have the same re- gion number as this unit Replace the DVD video with one bearing the correct region number. This type of disc cannot be played by this unit Replace the disc with one this unit can play. Th...

Black plate (90,1) <CRB2123-A/U>90 Message Cause Action ERR_FSP , ERR_FLSP , ERR_FRSP , ERR_CSP , ERR_RLSP , ERR_RRSP , ERR_SW The microphone cannot pick up the measuring tone of a speaker. ! Confirm that the speakers are connected correctly. ! Correct the input level setting of the power amp ...

Black plate (92,1) <CRB2123-A/U>92 ! In case of files recorded according to the Romeo file system, only the first 64 charac- ters can be displayed. ! When playing discs with MP3/WMA files and audio data (CD-DA) such as CD-EXTRA and MIXED-MODE CDs, both types can be played only by switching mod...

Black plate (95,1) <CRB2123-A/U>95 Terms Aspect ratio This is the width-to-height ratio of a TV screen. A regular display has an aspect ratio of 4:3. Wide screen displays have an aspect ratio of 16:9, providing a bigger picture for exceptional presence and atmosphere. Bit rate This expresses d...

Black plate (98,1) <CRB2123-A/U>98 Specifications General Rated power source ............... 14.4 V DC (allowable voltage range: 12.0 14.4 V DC) Grounding system ................... Negative type Max. current consumption ..................................................... 10.0 A Dimensions (...

Black plate (100,1) PIONEER CORPORATION 4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: (0) 3/570.05.11 PIONEER...