Pioneer DVD-204 - Manuals - manualsarea.com

Page 3 - Settings for Pioneer 7400 DVD Player

Connection to the external pushbuttons is made via standard telephone RJ-11 modular connectors. Two of the 4 wires(Green and Red) are used to start the selection, while the other two wires (Yellow and Black) provide 12 volts DC to illu-minate the pushbutton lamp. Connection to the Pioneer DVD player...

Page 4 - Settings for Pioneer 7200 DVD Player; Preparing for Programming:; Reviewing the DVD Disc:

MENU PAGE 1 /2 WEEKLY TIMER OFF POWER ON START T01:C01 TITLE PLAY MODE SINGLE REPEAT MODE OFF BAUD RATE 9600bps TRAY LOCK OFF STILL MODE FIELD D.R. COMP OFF MENU PAGE 2 / 2 MARK FRAME SQUELCH OFF SQUELCH DURING SEARCH ON SYNC OUT (DURING SQ) ON STACK MODE OSD OFF Settings for Pioneer 7200 DVD Player...

Page 6 - Programming Example; Programming the Buttons

Museum Technology Source, Inc. DVD Controller model DVD-204 Player: Pioneer DVD-V7200/7400 Firmware version 1.22 (C)2000 Museum Technology Source Inc. For further information contact: Museum Technology Source Inc. 323 Andover Street Wilmington, MA 01887 Phone: (800)729-6873 or (978)657-7132 Fax: (97...

Page 7 - Main Menu; Programming the Idle or Attract Loop

Button 1 plays from frame 12 to frame 600. ———- Main Menu ———- A = select address mode (FRAME, CHAPTER, or CHAPTER start/FRAME end) B = view or edit a Button’s selection I = view or edit the Idle selection T = Test the buttons and lamps O = go to Options menu Please choose a command: B Which button’...

Page 8 - List of Options; Button 1 Lamp Inversion; Interruptibility or Button Lock-out Function.

Please choose a command: T Testing buttons and lamps. Type any letter to stop. Button 1 pressed...released. Button 2 pressed...released. Button 3 pressed...released. Button 4 pressed...released. Done testing buttons. ———- Main Menu ———- A = select address mode (FRAME, CHAPTER, or CHAPTER start/FRAME...

Page 12 - ON-SCREEN PROGRAMMING; Button Idle Reset Options

ON-SCREEN PROGRAMMING Addendum to DVD-204 / DVD-212 Manual Effective with version 2.03, most programming tasks can be accomplished without having to connect the DVD-204 /DVD-212 to a computer. Using only a DVD-204 /DVD-212, a Pioneer 7200 /7400 DVD player, and a video monitor, it is possible to prog...

Page 16 - Museum Technology Source Inc.; VIDEO; Master Player; All Players Must Be Set; OR PROJECTOR

Museum Technology Source Inc. VIDEO MONITOR VIDEO MONITOR Master Player All Players Must Be Set To 9600 Baud Multi-Player Hookup SET "SLAVE DELAY" TO 1 SECOND MARCH 98 MPC Revised December 21 1999 LDV-2 Splitter Cable DVD DVD OR PROJECTOR OR PROJECTOR DVD-204 OR DVD-212 CONTROL Note: SLAVE D...

Page 17 - WINDOWS; BASED PC; If you are using

323 Andover Street Wilmington, MA, 01887800-729-6873 / 978-657-3898 Fax: 978-657-7132www.museumtech.com / [email protected] Museum Technology Source, Inc. NOTES ON PROGRAMMING MUSEUM TECHNOLOGY CONTROL UNITS WITH A WINDOWS BASED PC All versions of Windows contain a terminal program, HYPERTERMINAL,...

Page 18 - Trouble Shooting

For Video Disc Controllers, such as the VDC-200A and VDC-212, use the same settingsexcept the Baud Rate is 1200. Click OK. Main screen will appear and at the bottom leftmessage “Connected” will appear. Connect the programming cable from the 9-pin COM port on the back of the PC to the 5-pin circular ...