Pioneer DJM-707 - Manuals

Pioneer DJM-707 – Manual in PDF format online.

Manuals:

Manual

Manual Pioneer DJM-707

Summary

Page 3 - IMPORTANT NOTICE; Wash hands after handling.

3 <DRB1353> IMPORTANT NOTICE The serial number for this equipment is located on the bottomp l a t e . P l e a s e w r i t e t h i s s e r i a l n u m b e r o n y o u r e n c l o s e dwarranty card and keep it in a secure area. This is for yoursecurity. WARNING: Handling the cord on this produc...

Page 4 - CAUTIONS REGARDING; ) Designed for high sound quality; Independent cross fader lag cut:; CONTENTS

4 <DRB1353> Location Install the unit in a well-ventilated location where it willnot be exposed to high temperatures or humidity. ÷ Do not install the unit in a location which is exposed tod i r e c t r a y s o f t h e s u n , o r n e a r s t o v e s o r r a d i a t o r s .E x c e s s i v e h ...

Page 5 - CONNECTIONS; Connecting Input Components; DJ CD Players

5 <DRB1353> CONNECTIONS When connecting or changing the connection of units, make sure to first turn off the power switch and disconnect the power cordfrom the outlet.This mixer is not furnished with any connection cables; when performing connections, use the cables that came provided with you...

Page 6 - Output Connections; External effector; XLR type balanced output.; Power cord; Headphones

6 <DRB1353> CONNECTIONS FADER CURVE FADER START PHONES POWER CROSS FADER 2 CROSS FADER 1 CH-2 CH-1 CH-1 C.F. CH-2 MAX MIN FADER CUT LAG C.F. 1 CH-1 C.F. 2 CH-2 FADER REVERSE OFF ON OFF ON OFF ON PROFESSIONAL 2CHANNEL MIXER DJM-707 2. Connecting Headphones (front panel) Headphones 3. Output Con...

Page 7 - PART NAMES AND FUNCTIONS; Top Panel; CH-1 input selector switch; LOW

7 <DRB1353> PART NAMES AND FUNCTIONS PHONO 1 /LINE 1 +9 +12 -12 +6 -26 +12 -12 TRIM POWER MIC LEVEL HI LOW MIC SEND SESSION IN FADER START TRANSFORM MASTER LEVEL REVERSE CH-1 CH-2 CH-1 CH-2 REVERSE FEELING ADJ. L R REVERSE TRANSFORM FADER START CH-1 FADER START C.F.1 FADER START POWER PHONES C...

Page 8 - Lights when power is turned On.

8 <DRB1353> PART NAMES AND FUNCTIONS 5 CH-1 equalizer dials (HI/MID/LOW) HI Use to adjust CH-1 input treble response (range of adjustment:13 kHz, +6 dB to –26 dB). MID Use to adjust CH-1 input midrange response (range ofadjustment: 1 kHz, +6 dB to –26 dB). LOW Use to adjust CH-1 input bass res...

Page 9 - “Operating load adjust screw”; front panel FADER CURVE dials.

9 <DRB1353> PART NAMES AND FUNCTIONS 24 CH-1 fader lever The CH-1 fader lever is used to control the level of signalssent to the cross fader. Signal level is maximum at scale mark“10,” and minimum at scale mark “0”.When the front panel CH-1 FADER REVERSE switch is set to[ON], the signal level ...

Page 10 - Front Panel; 8 FADER REVERSE switches; Use to adjust CH-1’s fader attenuation curve.; CROSS FADER 1; Use to adjust cross fader’s CH-1 attenuation curve.; CROSS FADER 2; Use to adjust cross fader’s CH-2 attenuation curve.; FADER CUT LAG

10 <DRB1353> PART NAMES AND FUNCTIONS FADER CURVE FADER START PHONES POWER CROSS FADER 2 CROSS FADER 1 CH-2 CH-1 CH-1 C.F. CH-2 MAX MIN FADER CUT LAG C.F. 1 CH-1 C.F. 2 CH-2 FADER REVERSE OFF ON OFF ON OFF ON PROFESSIONAL 2CHANNEL MIXER DJM-707 38 39 40 41 42 Front Panel 38 FADER REVERSE switc...

Page 11 - Rear Panel; Connect to audio output from CH-2 CD player.; 5 External effector return jacks (RETURN); CD; Connect to the audio output of the CH-1 CD player.; 1 CH-1 PLAYER CONTROL jack

11 <DRB1353> PART NAMES AND FUNCTIONS BOOTH/ SESSION OUT CD PHONO / LINE PHONO / LINE PHONO LINE SIGNAL GND R L (MONO) (MONO) MASTER 2 MASTER 1 SEND RETURN CH-2 CD CH-1 MIC PHONO LINE SIGNAL GND CH-2 PLAYER CONTROL CH-1 PLAYER CONTROL 3 COLD1 GND 2 HOT SESSION IN R L R R R R L R L L L L 43 44 ...

Page 12 - FADER OPERATIONS; Adjusting Fader Lever Operating Sensation; Fader attenuation curve adjustment; Lag; Fader reverse function; Fader Start Function; Cross fader start play and back cue play

12 <DRB1353> FADER OPERATIONS Adjusting Fader Lever Operating Sensation Operating load adjust screw(FEELING ADJ.) The supplied hexagonal Allen driver can be used to adjust thehexagonal Allen screw located next to the top panel’s crossfader slider opening, thus modifying the sliding resistance ...

Page 13 - Start playback with cross fader

13 <DRB1353> FADER OPERATIONS Start playback with channel fader 1 To control a connected CD player, set the frontpanel FADER START selector switch for thecorresponding channel to its [CH-1] or [CH-2]position. When using the CH-1 fader lever to start the CH-1 CDplayer, set the front panel C.F.1...

Page 14 - There is little or no sound.; Problem; TROUBLESHOOTING

14 <DRB1353> The power does not turnon. There is little or no sound. Sound is distorted. CD player’s fader won’tstart. External effector don’twork. External effector’s sounddistorted. ÷ Connect the cord to a power outlet. ÷ Set the Input selector switch to the devicecurrently playing. ÷ Set th...

Page 15 - Audio Section; or less; SPECIFICATIONS; Accessories

15 <DRB1353> Audio Section Input terminal (input level/impedance) CD 1, 2 ....................................... –14 dBV (200 mV) / 22 k Ω LINE 1, 2 .................................... –14 dBV (200 mV) / 22 k Ω PHONO 1, 2 .................................. –54 dBV (2 mV) / 47 k Ω MIC ..........

Page 16 - PIONEER CORPORATION; BLOCK DIAGRAM

Published by Pioneer Corporation.Copyright © 2003 Pioneer Corporation.All rights reserved. PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC.Multimedia and Mass Storage Division: 2265 East 220th Street, Long Beach, CA 90810, U.S.A. TEL: 800-444-O...