Pioneer DEH-P9100R - Manuals

Before Using This Product F eatures Music server You can record music from the built-in CD play-er or from other audio devices and play themback on the music server. You can also orga-nize and edit favorite tracks, etc. Automatic title retrieval function usingGracenote CDDB (for encoding only) When ...

7 Before Using This Product A bout this product The tuner frequencies on this product are allo-cated for use in North America. Use in otherareas may result in improper reception. Products with voice control functions This product’s “Memory Stick” and the musicserver have no voice control functions. ...

A fter-sales service for Pioneer products Please contact the dealer or distributor fromwhere you purchased the product for its after-sales service (including warranty conditions) orany other information. In case the necessaryinformation is not available, please contact thecompanies listed below:Plea...

9 Before Using This Product R esetting the microprocessor The microprocessor must be reset under thefollowing conditions:When using this product for the first time afterinstallation.When the machine fails to operate properly.When strange (incorrect) messages appear onthe display. • To reset the micr...

10 ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS R emote controller and care Installing the lithium battery • Remove the cover on the back of the steering remote controller and insert thebattery with the (+) and (–) poles pointingin the proper direction. Replacing the lithium battery • Remove...

11 Before Using This Product U sing the steering remote con- troller Precaution: • Do not operate this unit while manipulating the steering wheel as this might result in a traffic acci-dent. • If you have to operate this unit unavoidably when driving, pay careful attention to the road ahead toavoid ...

D isplaying and setting the clock You can turn the time display on or off and setthe time. Setting the time display on or off 1. Press NEXT to display “CLK”. Press NEXT until “CLK” appears. 2. Press CLK and then press ON/OFF to turn the time display on. The light illuminates. When the time displayis...

13 Before Using This Product D etaching and replacing the front panel WARNING: • Do not use with the front panel left open. If the front panel is left open, it may result in injuryin the event of an accident. • Do not drive with the front panel removed. If the front panel is left removed, it may res...

Basic Operation T urning a source on or off You can select the source you want to listen to.To switch to built-in CD player, load a CD in thisproduct. (See page 19.) To switch to a “MemoryStick” player, load a “Memory Stick” in thisproduct. (See page 39.) 1. Press SOURCE to select the desired source...

15 Basic Operation Switching the function of the multi-func-tion buttons The “ 3 ” indicator shows that the multi-function buttons have functions other than those current-ly displayed. When this indicator is visible,press NEXT to switch through the functions ofthe multi-function buttons. • Press NEX...

16 ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS Display example (e.g., built-in CD player) K ey guidance indicator This product’s display features key guidanceindicators. These light to indicate which of the 5 / ∞ / 2 / 3 buttons you can use. When you’re in the function menu, audio menu or t...

17 Tuner D isplay and indicators FORM 1 FORM 2 q Band w LOC indicator e Preset number r Frequency t Stereo indicator B asic operation 1. Press SOURCE to select the tuner. Press SOURCE until “Tuner” appears. 2. Press VOLUME to extend the VOLUME outward. • When you press VOLUME, it extends out- ward s...

18 ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS Recalling broadcast stations 1. Press NEXT to display “1” – “6”. Press NEXT until “1” – “6” appears. 2. Press any of the buttons 1 – 6 to recall a station preset under that button. Note: • You can also use 5 or ∞ to recall broadcast sta- tions ...

S witching and scrolling the title When playing a CD TEXT disc, you can switchtext display such as artist name and track title.With text longer than 32 letters, you can scrollto see the rest of the text. 1. Press TITLE to switch the title mode. 2. Press the corresponding button to dis- play the desi...

21 Built-in CD Player P laying tracks in random order Random play lets you play back tracks on theCD in random order. 1. Press FUNC and then press RDM to select the random mode. 2. Press RDM to turn random play on. The light illuminates. Tracks will play in ran-dom order.• Press RDM again to turn ra...

P ausing CD playback Pause lets you temporarily stop playback of theCD. 1. Press FUNC and then press PAUSE to select the pause mode. 2. Press PAUSE to turn the pause on. The light illuminates. Play of the currenttrack pauses.• Press PAUSE again to turn the pause off.• When the pause mode is exited w...

23 MP3 Play D isplay and indicators FORM 1 FORM 2 q Source name w MP3 indicator e Bit rate indicator r Track number t Folder name y Play time u File name B asic operation The built-in CD player can playback MP3 filesrecorded on CD-ROM discs. (See page 71.) 1. Press OPEN to open the front panel. 2. I...

S witching and scrolling the title You can switch text display such as artist nameand track title. With text longer than 32 letters,you can scroll to see the rest of the text. 1. Press TITLE to switch the title mode. 2. Press the corresponding button to dis- play the desired title. FORM 1 Button Ope...

25 MP3 Play Note: • If you select other folders during repeat play, the repeat range changes to disc repeat. • If you perform track search or fast forward/reverse during one-track repeat, the repeat range changesto folder repeat. • Folder repeat plays back the tracks (MP3 files) in the current folde...

S electing tracks from the track title list The track title list lets you see the list of track(or folder) titles on a CD-ROM disc and selectone of them for playback. 1. Press FUNC and then press T.LIST to select the track title list mode. 2. Press NEXT to display the desired track (or folder) title...

27 Music Server Recording D isplay and indicators During record standby During recording q Recording source name w CD track number e Recording range indicator r CD information t Recording bit rate indicator y Remaining recordable time u Music server track number i Recording display Note: • The remai...

Digital and analog recording This product is intended for digital recordingfrom the built-in CD player to the music server.Recording from sources other than the built-inCD, such as multi-CD or AUX, will be recordedin analog. While digital recordings can be madewith less loss of quality, we recommend...

29 Music Server Recording Note: • If REC is pressed during recording, recording is ter- minated. • In the event of skipping, the recording will revert to the beginning of the track (retry function). • On record standby, the current track is repeated. This is cancelled when recording begins. • Even i...

S electing the recording range It is possible to select the recording range whenrecording from a CD. 1. In record standby, press FUNC to select the recording mode setting mode. 2. Press R.MODE to select the recording range. Press R.MODE repeatedly to switchbetween the following recording ranges: Bui...

31 Music Server Play D isplay and indicators FORM 1 FORM 2 q Source name w Bit rate indicator e Track number r Playlist file name t Play time y Track title B asic operation It is possible to play back tracks recorded onthe music server. 1. Press SOURCE to select the music serv- er. Press SOURCE unti...

Playlist files Playlist files are lists of information on groups oftracks, containing such details as recordingdate, digital/analog and location. For everytrack, the playlist will contain the date of record-ing, whether it is digital, and the artist’s name,etc. (Music data is stored only in the play...

33 Music Server Play S witching and scrolling the title You can switch the text display to view suchinformation as artist name and track title.With text longer than 32 letters, you can scrollto see the rest of the text.• When recording from the built-in CD it is pos- sible to take an artist name or ...

M usic server function menu The music server function menu has the follow-ing functions: Note: • If you do not operate the function within about 30 seconds, the display is automatically returned.(When you select title input modes (P.L.in, TRKin,ARTin), the display is not returned automatically.) R e...

35 Music Server Play 4. When you find the desired track (or playlist file), press SCAN to turn scanplay off. The light goes off. The track (or playlist file)will continue to play.• If the scan mode is automatically canceled, select the scan mode again. Note: • After track or playlist file scanning i...

2. Press PAUSE to turn pause on. The light illuminates. Play of the currenttrack pauses.• Press PAUSE again to turn pause off.• When the pause mode is exited while pause is on, “PAUSE” is displayed in thebasic display. Note: • You can also turn pause on or off by pressing PAUSE in the following disp...

37 Music Server Play S electing the playlist mode In playlist mode, a playlist file is used to distin-guish a group of tracks that have been definedas a group when recorded. This mode allowsyou to play back the tracks you want to hear asa group. (See page 31.) 1. Press FUNC and NEXT and then press P...

Erasing a playlist file from playlist mode Precaution: • Once a playlist file is erased, it can not be restored. Always check the confirmation screen before eras-ing. 1. Press 5 5 or ∞ ∞ to select the playlist file you want to erase from playlist mode. 2. Press FUNC and then press NEXT twice. 3. Pre...

39 “Memory Stick” Player D isplay and indicators FORM 1 FORM 2 q Source name w Bit rate indicator e Track number r Track title t Play time y Track artist name B asic operation The “Memory Stick” player plays one“MagicGate Memory Stick (MG Memory Stick)”at a time. (See page 72.) 1. Press OPEN to open...

S witching and scrolling the title You can switch text display such as artist nameand track title.With text longer than 32 letters, you can scrollto see the rest of the text. 1. Press TITLE to switch the title mode. 2. Press the corresponding button to dis- play the desired title. FORM 1 Button Oper...

E rasing tracks from the “Memory Stick” Tracks may be erased from the “Memory Stick”,either one track at a time or all at once. Erasing a track from the “Memory Stick” 1. Press FUNC and NEXT and then press ERStrk to select the one-track erasemode. 2. Press 2 2 or 3 3 to select the desired track. 3. ...

43 Multi-CD Player D isplay and indicators FORM 1 FORM 2 q Source name w Disc number e Track number r Disc title t Play time y Track title 50 -disc multi-CD player Only those functions described in this manualare supported for 50-disc multi-CD players. B asic operation This product can control a mul...

S witching and scrolling the title When playing a CD TEXT disc on a CD TEXTcompatible multi-CD player, you can switch textdisplay such as artist name and track title.With text longer than 32 letters, you can scrollto see the rest of the text. 1. Press TITLE to switch the title mode. 2. Press the cor...

45 Multi-CD Player P laying tracks in random order Random play lets you play back tracks in ran-dom order within the repeat range: multi-CDplayer repeat and disc repeat. 1. Select the repeat range. Refer to “Repeating play” on page 44. 2. Press FUNC and then press RDM to select the random mode. 3. P...

47 Multi-CD Player 5. Press 3 3 to move the cursor to the next character position. • Press 2 to move backwards in the display. 6. Press 3 3 to move the cursor to the last position and then press 3 3 one more time after entering the title. 7. Press BAND to cancel the disc title input mode. Note: • Wh...

Playback from ITS memory ITS play lets you listen to the tracks that youhave entered into ITS memory. When you turnon ITS play, tracks from ITS memory in themulti-CD player will begin to play. 1. Select the repeat range. Refer to “Repeating play” on page 44. 2. Press FUNC and NEXT and then press ITS...

49 DAB Tuner D isplay and indicators FORM 1 FORM 2 q Band w TRFC indicator e NEWS indicator r TXT indicator t Preset number y ANNC indicator u WTHR indicator i Service label o EXTRA indicator !0 DAB indicator !1 Service component label Indications that light when function is switchedon Indicator Fun...

S toring and recalling services Storing services 1. Press NEXT to display “1” – “6”. Press NEXT until “1” – “6” appears. 2. When you find a service that you want to store in memory, press and hold any ofthe buttons 1 – 6 until the preset numberstops flashing. The service is stored in memory under th...

51 DAB Tuner D ynamic label function Displaying dynamic labels 1. Press NEXT to display “D.TEXT”. Press NEXT until “D.TEXT” appears. 2. Press D.TEXT to switch to the dynamic label mode. 3. Press 2 2 or 3 3 to recall the three latest dynamic label broadcasts from thetuner’s memory. Pressing 2 or 3 sw...

53 TV Tuner D isplay and indicators FORM 1 FORM 2 q Band w Preset number e Channel B asic operation 1. Press SOURCE to select the TV tuner. Press SOURCE until “Television” appears. 2. Press VOLUME to extend the VOLUME outward. • When you press VOLUME, it extends for- ward so that it becomes easier t...

55 Audio Adjustments A djusting the audio easily The following functions let you easily adjustyour audio system to match the car interioracoustic characteristics which vary dependingon the type of car.• Recalling equalizer curves (EEQ)• Using position selector (POSI)• Using time alignment (T.AL1)• A...

57 Audio Adjustments Recalling sound field programs 1. Press AUDIO and then press SFC to select the sound field control mode. 2. Press the corresponding button to select the desired sound field program. Button Effect STUDIO Studio CLUB Club HALL Concert hall DOME Dome OCT Octaver 1 and 2 BBE BBE • P...

59 Audio Adjustments U sing time alignment The time alignment lets you adjust the distancebetween each speaker and the listening posi-tion to match the type of car. There are fivetypes of car stored which you can easily recallat any time. 1. Press AUDIO and NEXT and then press T.AL1 to select the ti...

Adjusting subwoofer settings When the subwoofer output is on, you canadjust the cut-off frequency and the output levelof the subwoofer. 1. Press AUDIO and NEXT and then press SW2 to select the subwoofer settingmode. 2. Press 2 2 or 3 3 to select the cut-off fre- quency. Each press of 2 or 3 selects ...

Audio Adjustments A djusting source levels SLA (source level adjustment) lets you adjustthe volume level of each source to prevent radi-cal changes in volume when switching betweensources.• Settings are based on the FM tuner volume level, which remains unchanged. 1. Compare the FM tuner volume level...

PRECAUTION: • Carrying out auto-equalizing under the follow- ing conditions may damage the speakers. Besure to check conditions thoroughly beforecarrying out auto-equalizing. – When speakers are incorrectly connected. (e.g., When a rear speaker is connected to asubwoofer output.) – When a speaker is...

Initial Settings 64 ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS I nitial settings menu The initial settings menu has the following func-tions: Initial settings menu operation You can operate the initial settings menu onlywhen the source is off. 1. Press and hold SOURCE to turn the source of...

65 Initial Settings S witching the telephone muting/attenuation setting When a call is made or received using a cellularphone connected to this product, the productcan be set to either mute or attenuate the audiooutput. 1. With the source turned off, press and hold 1. 2. Press MUTE.S to select the t...

S etting the warning tone The warning tone sounds to remind you todetach the front panel. (Refer to page 13.)You can turn the warning tone function on oroff. 1. With the source turned off, press and hold 1. 2. Press NEXT and then press DT-WRN to select the warning tone mode. 3. Press DT-WRN to turn ...

67 Other Functions A ttenuating volume The attenuator lets you lower the volume levelquickly (by about 90%). • Press ATT to turn the attenuator on. “ATT” appears in the display.• Press ATT again to turn the attenuator off and return to the original volume level. C hanging the display form This produ...

1. Press ENT and then press MOVIE to select the movie mode. 2. Press any of the buttons MOVIE1 – MOVIE4 or ALL to select the desiredmovie. • When you press ALL, you can display movies 1 to 4 sequentially. Note: • The movie screen will disappear temporarily when you perform other operations, but will...

69 Other Functions U sing the AUX source An IP-BUS-RCA interconnector such as theCD-RB20 or CD-RB10 (sold separately) letsyou connect this product to auxiliary equipmentfeaturing RCA output. For more details, refer tothe IP-BUS-RCA interconnector’s owner’s man-ual. Selecting AUX as the source • Pres...

Additional Information CD player and care • Use only CDs that carry either of the two Compact Disc Digital Audio marks shownbelow. • Use only normal, round CDs. If you insert irregular, non-round, shaped CDs they mayjam in the CD player or not play properly. • Check all CDs for cracks, scratches or ...

71 Additional Information MP3 files • MP3 is short for MPEG Audio Layer 3 and refers to an audio compression technologystandard. • This product allows playback of MP3 files on CD-ROM, CD-R and CD-RW discs. Discrecordings compatible with ISO9660 level 1and level 2 can be played back.Correspondence to...

“M emory Stick” player and care • Use only “Memory Stick” (“MagicGate Memory Stick”) with the mark shown below. • “Memory Stick” with the following mark can not be used. • The maximum storage capacity of the “MG Memory Stick” compatible with this product is128 MB. • When the erasure prevention switc...

73 Additional Information U nderstanding auto-equalizing error messages When correct measurement of car interior acoustic characteristics is not possible using the auto-equalizer, an error message may appear on the display. If an error message appears on the display,refer to the table below to see w...

U nderstanding built-in CD player error messages When problems occur during CD play, an error message may appear on the display. If an error mes-sage appears on the display, refer to the table below to see what the problem is and the suggestedmethod of correcting the problem. If the error cannot be ...

75 Additional Information U nderstanding music server error messages Display Cause Remedy ERROR- 23SERVER ERROR- 23 ERROR- 24SERVER ERROR- 24 ERROR- 30, A0, A1, B0SERVER ERROR- 30, A0, A1, B0 Can ’t play Expired No audio No PlayList SERVER READ ERROR SERVER WRITE ERROR TEMP Music server’s hard disc ...

U nderstanding music server error messages when recording Display Cause Remedy ERROR- 56 ERROR- 59 ERROR- 5A ERROR- 5B ERROR- 5- Can’t copy CD-ROM Defect M.Server full No disc NO SIGNAL PlayList full Retry SERVER READ ERR SERVER WRITE ERR TEMP Continued overleaf. 76 ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ...

77 Additional Information Display Cause Remedy Time short TOC ERR Track full Note: • Should any other error messages appear, refer to “Understanding music server error messages” on page 75.• The TOC (Table of Contents) consists of information other than the audio signal—such as the number of recorde...

79 Additional Information T erms ATRAC3 Short for “Adaptive Transform AcousticCoding3”. This is an audio compression tech-nology for high-quality and high compression. Itis possible to compress music data to about1/10th the level of a CD, allowing miniaturiza-tion of storage media. Bit rate This exp...

81 Additional Information S pecifications General Power source .............. 14.4 V DC (10.8 – 15.1 V allowable)Grounding system .......................................... Negative typeMax. current consumption ........................................ 10.0 ADimensions (DIN) (chassis) ...... 178 (W) ...

PIONEER CORPORATION 4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, BelgiumTEL: (0) 3/570.05.11 PIONEER ELECTRONICS ASIACENTR...

DEH-P90HDD Printed in Japan Imprimé au Japon <CRD3473-A> UC This product conforms to CEMA cord colors.Le code de couleur des câbles utilisé pour ce produit estconforme à CEMA. INST ALLA TION MANUAL MANUEL D’INST ALLA TION <KMMUF/01K00000> Fig. 2 Yellow/blackIf you use a cellular telephon...

A Title (English) Installation without the rubber bush (Fig. 6) Fig. 6 Removing the Unit (Fig. 7) (Fig. 8) Fig. 7 Fig. 8 Nut (5 mm) Dashboard Drill a 5.5 – 6.0 mmdiameter hole. Screw (5 × 16 mm) Nut (5 mm) Screw StrapBe sure to use the strap to secure the backof the unit in place. The strap can be b...

Installing the Unit on a Left-Hand-Drive Car Note: • When the unit is installed on a right-hand-drive car, the horizontal positions are inverted. 1. Secure inner holder to the inner cir- cumference of the steering wheelwith belt. (Fig. 15) • Fit the inner holder to the steering wheel so that the arr...