Pioneer CDX-FM677 - Manuals

Preparing to Use the Remote Controller Unit English 5 Precautions • Keep the remote controller unit in an area not exposed to long periods ofdirect sunlight. • The remote controller unit may not oper- ate properly if the transmitter of theremote controller unit is pointed towardsthe floor or the sea...

Using the Compact Discs Magazine 6 123456 Hold down the magazinelock button and, pull thetray out. Slide out the disc tray Disc tray Position the disc withthe label upward. Inserting discs [Page 6~7] Disc 1 to Disc 6 Changing disc trays Align the disc tray with the left and rightgrooves, and push it...

English 7 Notes on 8-cm (3-inch) CDs Do not use an 8-cm CD adapter. If it isused, the player may fail. To load an 8-cm CD, you need a special 8-cm CDtray (Part No. CXB5931). Ask yourPioneer service station about it. 8cm • Do not put the magazine in a place where it will be exposed to hightemperature...

Using the Compact Discs Magazine 8 2 1 Insert the magazine. • Do not put your fingers in the magazine tray as this may lead to incorrect opera-tion and damage to the player. • If the label on the magazine is coming off or wrinkled up, it may damage theeject mechanism, and in some cases,the magazine ...

Playing Compact Discs English 9 1. Switch the radio on and tune to Modulating Frequencies. • The initial value is 89.1 MHz. (See Page 20 regarding switching CDplayer transmission frequency.) • If your radio does not have muting, there may be some noise before power switchof control unit is ON. If th...

10 Using Track Search/Fast Forward and Reverse Playing Compact Discs This product lets you select thetrack search function or fast for-ward/reverse function by changingthe length of the time you pressthe button. or Track Number Elapsed play time Track search 0.5 seconds or less Fast forward/Reverse ...

11 English Press button to pause during discplayback. Press button again to release pause. Pausing Repeat MEMO You can select a track using the tracksearch during pause. (“PAUSE” is offwhile a track is being searched.) Whenthe track search ends, the found track is paused at its beginning. Track Repe...

1. Select the desired repeat mode. 2. Hold down button for more than 2 second. Once the current track has been played,the microprocessor will randomly selectthe next and subsequent tracks. To cancel random play, hold down but-ton for more than 2 seconds again. Random Play Playing Compact Discs MEMO ...

English 13 1. Play the track you want to program. This function lets you program and play the tracks you want. You can listen to just yourfavorite tracks. 2. Press button to program the track. ITS (Instant Track Selection) [Page 13~15] Programming MEMO • The ADPS function* of the multi-play CD playe...

1. Select the desired repeat mode. Playing Compact Discs 14 2. Hold down button for more than 2 seconds. To cancel ITS play, hold down buttonfor more than 2 seconds again. ITS Play MEMO • If track repeat is selected as the repeat mode in step 1, it will automaticallyswitch to disc repeat mode and IT...

English 15 During ITS play, select the trackyou wish to erase by using tracksearch.Hold down button for more than 2seconds to erase the program.(When there are no more memo-rized tracks, “EMPTY” is displayed,and ITS play is canceled.) Erasing the ITS Play To erase a single track program: During norm...

Playing Compact Discs 16 1. Select the disc for which you want to enter a title. You can enter a title for the disc in the CD player. The title stored for the disc can be dis-played. 2. Hold down button for more than 2 seconds to select title input mode. Disc Ti tle [Page 16~19] Entering Ti tle MEMO...

Each press of the button switchesbetween display of track number(elapsed play time) and disc titleindications. Playing Compact Discs 18 MEMO • When you perform any operation while the disc title is being displayed, the nor-mal operation display will appear for 8seconds. • If TEXT data is not recorde...

English 19 1. Press button to display the disc title list. Select the disc to be played from the disc list display 2. When the title of the disc you want to listen to is displayed,press button for more than 2 sec-onds. That disc is played. Each press of button displays thetitles of the discs in maga...

1. Hold down button for more than 2 seconds. The modulator settingmode will be entered, and the fre-quency will be displayed. MEMO If you do nothing within the next 8 sec-onds, the modulator setting modereturns to the normal mode without changing the most recent settings. Playing Compact Discs 20 Mo...

Playing Compact Discs 22 Take action accordingto the chart below. Check discs and magazineonce more. If it still doesn’t workafter checking. Press the CD player’s Clearbutton. (See Page 23.) If it still doesn’t work. Read “After-sales servicefor Pioneer products” andrequest servicing. Message No MAG...

A transport screw has been attached tothe set in order to protect it during trans-portation. After removing the transportscrew, cover the hole with the suppliedseal.Be sure to remove the transport screwbefore mounting the set. The removedtransport screw should be retained in theaccessory bag for use...

Published by Pioneer Corporation.Copyright © 2000 by Pioneer Corporation.All rights reserved. Publication de Pioneer Corporation.Copyright © 2000 Pioneer Corporation.Tous droits de reproduction et de traduction réservés. Printed in ThailandImprimé en Thaïlande<CRD3323-A/N> UC <KFJFF/00H0000...

Connecting the Units/Connexion des appareils D A C B E F Yellow To the terminal always supplied with powerregardless of ignition switch position. Jaune Vers une borne alimentée en permanence,indépendamment de la position de la clé decontact. Red To electric terminal controlled by igni-tion switch (1...

E D A F Tout d’abord, percer les trous d’installationdans la console, etc.• Avant de percer les trous dans la console, s’assurer que l’on peut le faire sans dan-ger et veiller à ne pas endommager lescâbles d’alimentation électrique. • La profondeur minimale requise pour le support de montage affleur...

A transport screw has been attached to theset in order to protect it during transporta-tion. After removing the transport screw,cover the hole with the supplied seal. Besure to remove the transport screw beforemounting the set. The removed transportscrew should be retained in the accessorybag for us...

2 3 English Français C C 2 3 E E D D • Consult with your nearest dealer if installa- tion requires the drilling of holes or othermodifications of the vehicle. • Before finally installing the unit, connect the wiring temporarily and make sure it is allconnected up properly and the unit and thesystem ...