Pioneer BDR-203 - Manuals - manualsarea.com

Page 2 - Pioneer

BDR-203/BDC-203 Command Reference Manual Version 0.90 Page 1 1 Introduction ........................................................................................................................................................................3 1.1 Change History ......................................

Page 4 - Introduction; Change History

BDR-203/BDC-203 Command Reference Manual Version 0.90 Page 3 1 Introduction This document specifies a command set for BDR-203/BDC-203. (Hereinafter referred to as "drive") BDR-203 is a BD writer drive. BDC-203 is a BD combo drive. BDC-203 does not write to BD-R/RE disc. The drive fundamental...

Page 5 - Interface; SATA version

BDR-203/BDC-203 Command Reference Manual Version 0.90 Page 4 2 Interface The drive supports Serial ATA interface. 2.1 SATA version The drive complies with the Serial ATA Revision 2.6. The data transfer mode is General1 1.5GBits/sec. 2.2 Drive Information The data returned by INQUIRY command covers t...

Page 6 - DRIVE Descriptions; Compatible Media

BDR-203/BDC-203 Command Reference Manual Version 0.90 Page 5 3 DRIVE Descriptions 3.1 Compatible Media The drive supports reading of BD-ROM, BD-R/RE Disc, CD-ROM/-R/-RW Disc, DVD-ROM/-R/-RW/RAM/-R DL Disc and +R/+RW/+R DL Disc and writing of BD-R/RE Disc (except BDC-203), CD-R/-RW Disc, DVD-R/-RW/RA...

Page 7 - Packet Commands; Table 1– Packet Commands

BDR-203/BDC-203 Command Reference Manual Version 0.90 Page 6 4 Packet Commands The following commands are implemented in the drive. In case of BDC-203, the following commands are not performed for BD-R/RE; CLOSE TRACK/SESSION, FORMAT UNIT, RESERVE TRACK, SEND DISC STRUCTURE, SEND OPC INFORMATION, SY...

Page 9 - BLANK Command

BDR-203/BDC-203 Command Reference Manual Version 0.90 Page 8 4.1 BLANK Command This command is valid for CD-RW and DVD-RW media. The Immed bit is supported. The READ DISC INFORMATION Command, the READ TRACK INFORMATION Command and the TEST UNIT READY Command are used to detect completion of the blan...

Page 10 - FORMAT UNIT Command

BDR-203/BDC-203 Command Reference Manual Version 0.90 Page 9 4.3 FORMAT UNIT Command The CmpLst bit is supported only in DVD-RAM media, must be set to zero with other medias. The Interleave Value field is not supported and must be set to zero. The Format Code field allows the value of 001b and 111b....

Page 13 - Table 11 – Profile List

BDR-203/BDC-203 Command Reference Manual Version 0.90 Page 12 Table 11 – Profile List Profile Number Profile Name 0002h Removable Disc 0008h CD-ROM 0009h CD-R 000Ah CD-RW 0010h DVD-ROM 0011h DVD-R Sequential Recording 0012h DVD-RAM 0013h DVD-RW Restricted Overwrite 0014h DVD-RW Sequential Recording ...

Page 16 - Table 14 – Current Profile and Current bit for DVD Media

BDR-203/BDC-203 Command Reference Manual Version 0.90 Page 15 Table 14 – Current Profile and Current bit for DVD Media Current bit of the Profile State No Current Profile Rem ovable Disc 0002 DVD-RO M 0010 DVD-R S.W. 0011 DVD-RA M 0012 DVD-RW R .O. 0013 DVD-RW S.W. 0014 DVD-R DL S. W. 0015 DVD-R DL ...

Page 17 - Table 16 – Current Profile and Current bit for BD-RE/R/ROM Media

BDR-203/BDC-203 Command Reference Manual Version 0.90 Page 16 The other Current bits are all 0. 4.4.3.3 Current Profile and Current bit for +R/+RW/+R DL Media The following table indicates the Current Profile of the Feature Header and the Current bit of the Profile List that +R/+RW/+R DL media is mo...

Page 19 - Current bit of the Feature List for DVD Media

BDR-203/BDC-203 Command Reference Manual Version 0.90 Page 18 4.4.4.2 Current bit of the Feature List for DVD Media The Current bit of the Feature List for DVD media is set as Table 18 – Feature List for DVD-ROM/-R/-RW/RAM Media. The State No. is described in the Table 12 – Media states. Table 18 – ...

Page 23 - Table 24 – Performance Data

BDR-203/BDC-203 Command Reference Manual Version 0.90 Page 22 4.6.1 Performance (Type field = 00h) The drive has nominal only performance parameter. If Except field dose not set to 00b, the drive returns the Performance Header only. Table 24 – Performance Data Write bit Disc Start LBA Start Performa...

Page 32 - Table 30 – Medium Type Codes

BDR-203/BDC-203 Command Reference Manual Version 0.90 Page 31 The Medium Type was defined in a legacy specification, and remains in this drive. The Medium Type Codes are defined as shown in Table 30 – Medium Type Codes. Table 30 – Medium Type Codes Page code Description 00h Door closed, medium type ...