Pioneer AVIC-X9115BT - Manuals

Terms and Conditions for theTele Atlas Data THIS IS A LEGAL AGREEMENT (THE “ AGREE- MENT ” ) BETWEEN YOU, THE END USER, AND TELE ATLAS NORTH AMERICA, INC. ( “ Tele Atlas ” ). BY USING YOUR COPY OF THE TELE ATLAS DATA, YOU AGREE TO THE TERMSAND CONDITIONS OF THIS AGREEMENT. 1 Grant of License. Tele A...

In addition to the Warranties contained inthe Agreement, YOU UNDERSTAND THATTHE POIS ARE LICENSED ON AN “ AS IS ” BASIS WITHOUT GUARANTEE, ANDTHERE ARE NO OTHER WARRANTIESMADE WHETHER, EXPRESS OR IMPLIED,INCLUDING WITHOUT LIMITATION, ANYEXPRESS OR IMPLIED WARRANTIES OFMERCHANTABILITY OR FITNESS FOR ...

6 Revised Versions of the GNU Lesser General Public License. The Free Software Foundation may publish re-vised and/or new versions of the GNU LesserGeneral Public License from time to time.Such new versions will be similar in spirit tothe present version, but may differ in detail toaddress new probl...

Copyright Notices for NorthAmerican data 1) Tele Atlas â MultiNet â North America data. As of the Effective Date, the copyright noticefor Tele Atlas â MultiNet â North America is: NOTICE ã 1984 – 2009 Tele Atlas. All rights reserved. This material is proprietary and the subject ofcopyright protectio...

CAUTION ! When a route is calculated, the route andvoice guidance for the route are automaticallyset. Also, for day or time traffic regulations,only information about traffic regulations ap-plicable at the time when the route was calcu-lated is shown. One-way streets and streetclosures may not be ta...

“ GOOG-411 ” service p Pioneer does not bear responsibility for theaccuracy of the information. p Pioneer does not bear responsibility forchanges to information services providedby related companies, such as cancellationof services or changing to pay-services.Also, we do not accept return of the pro...

When using a display connectedto REAR MONITOR OUTPUT The video output terminal ( REAR MONITOR OUTPUT ) is for connection of a display to en- able passengers in the rear seats to watchvideo images. WARNING NEVER install the Rear Display in a location thatenables the driver to watch video images while...

Visit Our Web site Visit us at the following site: http://www.pioneerelectronics.com In Canada http://www.pioneerelectronics.ca 1 Register your product. We will keep the detailsof your purchase on file to help you refer tothis information in the event of an insuranceclaim such as loss or theft. 2 Re...

“ External storage device (USB, SD) ” The SD memory card, SDHC memory cardand USB memory device are collectively re-ferred to as the “ external storage device (USB, SD) ” . If it indicates the USB memory only, it is referred to as the “ USB storage device ” . Notice regarding videoviewing Remember t...

Map coverage For more details about the map coverage ofthis navigation system, refer to the informationon our website. Protecting the LCD paneland screen p Do not allow direct sunlight to fall on theLCD screen when this product is not beingused. Extended exposure to direct sunlightcan result in LCD ...

Checking part names and functions This chapter gives information about thenames of the parts and the main featuresusing the buttons. 1 Disc loading slot Insert a disc to play. = For details concerning operations, referto Inserting and ejecting a disc on the next page. 2 LCD screen 3 EJECT button 4 R...

Keep moving upward or downward ; Changes the map scale continuously. p This operation is available only while themap screen is displayed. Moving MULTI-CONTROL to the left or right ; Allows you to change the frequency onestep at a time; operates track search con-trols. Keep moving MULTI-CONTROL to th...

Inserting an SD memory card % Insert an SD memory card into the SD card slot. Insert it with the contact surface facing to theleft and press the card until it clicks and com-pletely locks. p This system is not compatible with MultiMedia Card (MMC). p Compatibility with all SD memory cards isnot guar...

Connecting anddisconnecting an iPod CAUTION ! To prevent data loss and damage to the sto-rage device, never remove it from this naviga-tion system while data is being transferred. ! If data loss or corruption occurs on the sto-rage device for any reason, it is usually notpossible to recover the data...

3 Touch the language that you want to use for the voice guidance. The navigation system will now restart. 4 Touch [Destination] to display Destina- tion menu. The disclaimer appears. Read the disclaimercarefully, checking its details, and then touch[ OK ] if you agree to the conditions. The “ Destin...

How to use the navigation menu screens Screen switching overview 2 5 7 8 6 1 3 4 Basic operation En 34 Chapter 02

What you can do on each menu 1 Top Menu Press the MENU button to display the “ Top Menu ” . This is the starting menu to access the desiredscreens and operate the various functions. 2 Destination Menu You can search for your destination on thismenu. You can also check or cancel your setroute from th...

How to use the map Most of the information provided by your navigation system can be seen on the map. You need to be-come familiar with how information appears on the map. How to read the map screen This example shows an example of a 2D map screen. 2 3 4 5 6 7 8 9 a b c d e f g h 1 p Information wit...

p This information is based on the map data-base. Thus, the information may differ fromactual conditions. Use it as just a direc-tional reference for your driving. Note regarding the route highlightedin purple p A route highlighted in purple on the mapindicates that your route includes a roadnot mat...

3 Touch anywhere on the map briefly to show the tilt controls and rotation angle. Controls for tilt and rotation angle p Touching hides the tilt controls and rota- tion angle. 4 Touch the controls to adjust the tilt and rotation angle. The basic flow of creatingyour route 1 Park your vehicle in a sa...

CAUTION For safety reasons, these route-setting functionsare not available while your vehicle is in motion.To enable these functions, you must stop in asafe place and put on the parking brake beforesetting your route. p Some information regarding traffic regula-tions depends on the time when the rou...

5 Touch the key next to “ State: ” and touch the desired state, province, or terri-tory on the list. The screen returns to the previous screen. 6 Touch the key next to “ City: ” to enter the city name. 7 Enter the city name or Zip code. ! When the options are narrowed down to sixor less, those are a...

11 Touch one of the options at the bottomof the “ Map Confirmation Screen ” to select the next operation. Touch [ Route... ] then [ Go Here Now ] to set your selected position as your destination andcalculate the route up that point. = For details of other operations on the “ Map Confirmation Screen...

5 Touch the POI you want. ! Touching the [ Name ] tab sorts the options in the list in alphabetical order. ! Touching the [ Distance ] tab sorts the op- tions in the list in order by distance. p Icons are helpful for quickly telling the cate-gory of facilities with the same name. 6 Touch one of the ...

3 Enter the address you want. = For details, refer to Searching for a location by address on page 42. 4 Touch the category you want. = For the subsequent operations, refer to Searching for POIs around the cursor on page 44. Using “ Saved Criteria ” Storing your selection sequence You can store the s...

! Touching [ Save Criteria ] without selecting a category allows you to store only your se-lected search method including all cate-gories. ! If there aren ’ t any more detailed categories, a blank list appears. In that case, touching[ Save Criteria ] allows you to store it as the currently selected ...

Touch [ Route... ] then [ Go Here Now ] to set your selected position as your destination andcalculate the route up that point. = For details of other operations on the “ Map Confirmation Screen ” , refer to What you can do with the “ Map Confirmation Screen ” on page 54. Selecting a location yousea...

2 Touch the entry you want. 3 Touch one of the options at the bottom of the “ Map Confirmation Screen ” to select the next operation. Touch [ Route... ] then [ Go Here Now ] to set your selected position as your destination andcalculate the route up that point. = For details of other operations on t...

What you can do with the “ Map Confirmation Screen ” Under most conditions after searching for a location, the “ Map Confirmation Screen ” appears, so you can select the next operation. The options shown below are available on this screen: Map Shows a full-screen 2D map centered on thecursor positio...

1 Search for a location or position the cursor on the desired area by scrolling themap and displaying the “ Map Confirmation Screen ” . 2 Touch [Save as...] on the “ Map Confirmation Screen ” . 3 Touch [Add Pin]. The pin icon is placed on the map and thescreen returns to the map screen. p The color ...

Storing the location in “ Favorites ” Storing your favorite locations as “ Favorites ” provides you with the opportunity to save thetime and effort of re-entering this information.Stored items can be made available on “ Fa- vorites ” later. = For more details of the operation, refer to Selecting a l...

Checking the current routeconditions The “ Route Information ” screen provides you with various detailed information about thecurrent route.This is an example showing a route with twowaypoints. p This function is available only when theroute is set and your vehicle position is onthe route. p You can...

3 Touch [Dest.] to switch to the first way- point screen. The “ Route Information (to via) ” screen ap- pears. 4 Touch [Via] to switch to the second waypoint screen. The “ Route Information (to via) ” screen for next waypoint appears. 5 Touch [Via] to return to the screen for whole route. The “ Rout...

Editing waypoints You can edit waypoints (locations you want tovisit on the way to your destination) and recal-culate the route so that is passes throughthese locations. Adding a waypoint 1 Search for a location. = For more details, refer to the descriptionsfrom page 42 to page 52. 2 Touch [Route......

3 Enter the name and then touch [Done] to complete the entry. The previous screen appears. p Saved route can be recalled later. = For details, refer to Setting a route by recal- ling a saved route on page 51. Deleting the entry in “ Saved Routes ” 1 Touch [Destination] on the “ Top Menu ” , and then...

If you have an active subscription toMSN Direct service, you can check andbrowse various information on your navigationsystem, such as gas prices, movie times,weather conditions and traffic information.The information will be updated periodically. — This function is available for AVIC -X9115BTonly. ...

Subscribing to the MSN Directservice Within two days of completing the subscription,execute Activating the MSN Direct function . 1 Access the following URL and read the description. http://www.msndirect.com/pioneer 2 Be sure to check the coverage area and other availabilities of MSN Direct on theweb...

! [ Distance ] (default): Sorts the items in the list in order by dis-tance from the vehicle position. ! [ Name ]: Sorts the items in the list alphabetically. ! [ Price ]: Sorts the items in the list by price. 4 Touch on the item that you want to view in detail. 1 2 3 1 The names of gas stations 2 G...

5 Touch the desired tab to change the sort order. Available options; ! [ Distance ] (default): Sorts the items in the list in order by dis-tance from the vehicle position. ! [ Name ]: Sorts the items in the list alphabetically. 6 Touch on the item that you want to view in detail. 1 2 1 The names of ...

Browsing weatherinformation Local weather information can be displayedon a list. Switching the screen allows you tosee worldwide weather conditions. Although the MSN Direct service regularly up-dates weather information, the informationprovided may not necessarily correspond to ac-tual weather condi...

Although the MSN Direct service regularly up-dates traffic information, the information pro-vided may not necessarily correspond to actualtraffic conditions. Please refer to Notice about MSN Direct on page 64. 1 Touch [Destination] on the “ Top Menu ” , and then touch [MSN Direct]. 2 Touch [Traffic]...

1 2 3 4 5 1 Flow-related icon 2 Street or location and direction 3 Distance to the location and event 4 Switching to traffic event list = For more details concerning the opera-tion, refer to Viewing the traffic event on page 68. 5 Touch to change the settings of traffic infor-mation. = For more deta...

Browsing news headlines Recent news headlines are displayed in a list. Although the MSN Direct service regularly up-dates news headlines, the information pro-vided may not necessarily correspond tocurrent news headlines. Please refer to Notice about MSN Direct on page 64. 1 Touch [Destination] on th...

5 Touch one of the options at the bottom of the “ Map Confirmation Screen ” to select the next operation. = For details of other operations on the “ Map Confirmation Screen ” , refer to What you can do with the “ Map Confirmation Screen ” on page 54. Browsing stock quotes Recent stock quotes are dis...

Hands-free phoning overview CAUTION For your safety, avoid talking on the phone asmuch as possible while driving. If your cellular phone features Bluetooth ® technology, this navigation system can be con-nected to your cellular phone wirelessly. Usingthis hands-free function, you can operate thenavi...

Searching for nearby phones The system searches for available cellularphones near the navigation system, displaysthem in a list, and registers them for connec-tion. 1 Activate the Bluetooth wireless tech- nology on your cellular phone. For some cellular phones, no specific action isnecessary to acti...

5 Touch the model name of the cellular phone to be connected. The system searches for cellular phones fea-turing Bluetooth technology that are waitingfor the connection and displays them in thelist if the device has found. p If you cannot find the desired model nameon the list, touch [ Other phones ...

Connecting a registeredcellular phone The navigation system automatically connectsthe cellular phone selected as the target ofconnection. However, connect the cellularphone manually in the following cases: ! Two or more cellular phones are registered,and you want to manually select the cellu-lar pho...

Receiving a phone call You can perform hands-free answering byusing the navigation system. Answering an incoming call The system informs you that it is receiving acall by displaying a message and producing aring sound.If [ Auto Answer Preference ] is set to [ Off ], answer the call manually. Answeri...

Direct dialing 1 Touch [Dial Pad] on the “ Phone Menu ” . = For details, refer to Displaying the Phone Menu on page 73. The direct dial screen appears. 2 Touch the number keys to enter the phone number. The phone number that was input is dis-played. Input number : The input number is deleted a digit...

2 If you touch an entry on the list, dialing starts. p If you touch [ Detail ], you can check the de- tails of the party before making a phonecall. p To cancel the call after the system startsdialing, touch . 3 Touch to end the call. Calling a number in the “ Contacts ” screen After finding the entr...

p If you have not registered your home num-ber, a message appears. Touch [ Yes ] to start registration. = For more details about “ Set Home ” , refer to Setting your home position on page 155. Dialing GOOG-411 CAUTION Local and/or long distance charges for making aphone call may apply. You can dial ...

p Depending on the cellular phone that isconnected to this navigation system viaBluetooth technology, this navigation sys-tem may not be able to display the phonebook correctly. (Some characters may begarbled.) p If the phone book in the cellular phone con-tains image data, the phone book may notbe ...

3 Touch [OK]. Data on the selected item is cleared from thisnavigation system ’ s memory. p If you do not want to clear memory that youhave selected, touch [ Cancel ]. Setting the phone Setting the phone volume The volume level for hands-free phoning canbe adjusted. 1 Touch [Phone Volume] on the “ P...

[ After 6 seconds ]: Answers after six seconds [ After 10 seconds ]: Answers after ten sec- onds Setting the automatic rejectionfunction If this function is on, the navigation systemautomatically rejects all incoming calls. 1 Touch [Phone Settings] on the “ Phone Menu ” . = For details, refer to Dis...

p Up to 30 characters can be entered for a de-vice name. Notes for hands-free phoning General notes ! Connection to all cellular phones featuringBluetooth wireless technology is not guar-anteed. ! The line-of-sight distance between this na-vigation system and your cellular phonemust be 10 meters or ...

! With some cellular phones, it may not bepossible to transfer all items in the phonebook at one time. In this case, transferitems one by one from your cellular phone. ! Depending on the cellular phone, this navi-gation system may not display the phonebook correctly. (Some characters may begarbled, ...

You can play a normal music CD using thebuilt-in drive of the navigation system. Thissection describes how. 1 Insert the disc you want to play into disc-loading slot. Playback starts from the first track of the CD. 2 Touch [DISC] on the “ AV Source ” menu to display the “ CD ” screen. = For details ...

Selecting a track from the list The list lets you see the list of track titles, filenames or folder names on a disc and selectone of them to play. 1 Touch [List]. 2 Touch the track you want to play. The track currently playing is highlighted.Touching or switches the selection to the next or previous...

You can play a disc that contains compressedaudio files using the built-in drive of the navi-gation system. This section describes theseoperations. p In the following description, the MP3,WMA, AAC, WAV files are collectively re-ferred to as “ Compressed audio file ” . p AVIC -X9115BT cannot play WAV...

p For WAV files, only the information markedwith (*) can be displayed. p If you operate no functions for about 30 sec-onds, the display automatically returns tothe ordinary display. Using the “ Function ” menu 1 Touch [DISC] on the “ AV Source ” menu to display the “ ROM ” screen. = For details conc...

You can play a DVD-Video using the built-indrive of the navigation system. This section de-scribes operations for playing a DVD-Video. p AVIC -X7115BT cannot play DVDs. Reading the screen 1 2 3 4 5 6 7 8 9 a 1 Source icon Shows which source has been selected. 2 Audio track indicator Shows the audio ...

= For details, refer to Using the “ Function ” menu on page 94. 3 Display the DVD menu You can display the menu by touching [ Menu ] or [ TOP M. ] while a disc is playing. Touching either of these keys again lets you start play-back from the location selected from themenu. For details, refer to the ...

Resuming playback (Bookmark) The Bookmark function lets you resume play-back from a selected scene the next time thedisc is loaded. Touching [ B.Mark ]: You can bookmark one point for each of up tofive discs. If you try to memorize another pointfor the same disc, the oldest bookmark will beoverwritt...

3 Touch the desired menu item. Using DVD menu by touch panel keys If items on the DVD menu appear at the bot-tom of the screen, the touch panel keys mayoverlay them. If so, select an item using thosetouch panel keys. 1 Touch [ a ], [ b ], [ c ] or [ d ] to select the desired menu item. Play All Chap...

You can play a DVD-VR (DVD Video RecordingFormat) disc using the built-in drive of the na-vigation system. This section describes opera-tions for DVD-VR discs. p AVIC -X7115BT cannot play DVD-VR discs. Reading the screen 1 3 4 5 6 7 8 9 2 1 Source icon Shows which source has been selected. 2 Audio t...

! To select 71 minutes 00 seconds, touch [ 7 ], [ 1 ], [ 0 ], [ 0 ] and [ Enter ] in order. p To cancel the input numbers, touch [ Clear ]. Switch the playback mode You have two methods for playing DVD-VRdiscs; Original (original) and Playlist (play- list). p Titles created with DVD recorders arecal...

You can play a DivX disc using the built-indrive of the navigation system. This section de-scribes that operations. p AVIC -X7115BT cannot play DivX files. Reading the screen 9 1 3 4 5 6 8 2 7 1 Source icon Shows which source has been selected. 2 Audio track indicator Shows the audio track number cu...

6 Switch the information Touching [ Disp ] changes the content of the in- formation panel as follows:Disc information display — Current folder dis- play — File name display 7 Display the map screen 8 Switch the media file type played When playing a disc containing a mixture ofvarious media file type...

Configure the DVD-Video/DVD-VR/DivX player. Displaying DVD Setup menu 1 Play the disc that contains DVD-Video, DVD-VR or DivX. 2 Touch [DISC] on the “ AV Source ” menu to display the normal playback screen. = For details concerning operations, refer to Screen switching over view on page 34. 3 Touch ...

Setting the angle icon display You can set the angle icon to display in scenes where the angle can be switched. 1 Touch [DVD Setup] on the “ Function ” menu. = For details, refer to Displaying DVD Setup menu on the previous page. 2 Touch [Multi Angle]. Touching [ Multi Angle ] switches between [ On ...

p The parental lock level is recorded on thedisc. You can confirm it by looking at thedisc package, the included literature or thedisc itself. You cannot use parental lockwith discs that do not feature a recordedparental lock level. p With some discs, parental lock operates toskip certain scenes onl...

Setting the subtitle file forDivX You can select whether to display DivX exter-nal subtitles or not. p If no DivX external subtitle files exist, theoriginal DivX subtitles are displayed evenwhen [ Custom ] is selected. 1 Touch [DVD Setup] on the “ Function ” menu. = For details, refer to Displaying ...

Language code chart for DVDs Language (code), input code Language (code), input code Language (code), input code Japanese (ja), 1001 Guarani (gn), 0714 Pashto, Pushto (ps), 1619 English (en), 0514 Gujarati (gu), 0721 Quechua (qu), 1721 French (fr), 0618 Hausa (ha), 0801 Rhaeto-Romance (rm), 1813 Spa...

You can play the compressed audio filesstored in the external storage device (USB,SD). p In the following description, the SD mem-ory card and USB memory device are col-lectively referred to as the “ external storage device (USB, SD) ” . If it indicates the USB memory device only, it is referred to ...

Shows the artist name currently playing(when available). a Album title indicator* Shows the title of the album for the currenttrack (when available). b Playback condition indicator The marks shown below appears and indi-cates the current playback condition. : Scan play : Random play : Repeat play In...

Using the touch panel keys( Video ) 6 5 2 1 4 7 3 a 9 8 1 Recall equalizer curves = For details, refer to Recalling equalizer cur ves on page 161. 2 Display the “ Function ” menu = For details, refer to Using the “ Function ” menu on the next page. 3 Switch the operation screen Touching this key swi...

Using the USB interface cable for iPod en-ables you to connect your iPod to the naviga-tion system. p A USB interface cable for iPod (CD-IU230V)(sold separately) is required for connection. Starting procedure % Connect your iPod. The source changes and then playback willstart. = For details, refer t...

p If characters recorded on the iPod are notcompatible with this navigation system,they may turn into garbled characters. Using the touch panel keys( Music ) 4 3 5 7 8 9 a 1 6 2 1 Album artwork Touch the key to enlarge the album artwork. Ifyou touch again, the artwork returns to its nor-mal size. 2 ...

2 Touching or switches the selection to the next or previous page in the list. 3 Touch the item that you want to refine. Refine the item until the track title is displayedon the list. p Touching [ All ] on the list includes all op- tions in the current list. For example, if youtouch [ All ] after to...

3 Touch your desired item on the list to narrow down them until the video list ap-pears. = For details concerning operations, refer to Browsing for a video on this page. 4 On the video list, touch the video you want to play. 5 Touch the screen to display the touch panel keys. = For more details of t...

Narrowing down a video with the list 1 Touch the category you want. 2 Touching or switches the selection to the next or previous page in the list. 3 Touch the item that you want to refine. Refine the item until the track title is displayedon the list. 4 On the video list, touch the video you want to...

You can listen to the radio by using the naviga-tion system. This section describes operationsfor radio (FM). % Touch [FM] on the “ AV Source ” menu to display the “ FM ” screen. = For details concerning operations, refer to Screen switching over view on page 34. Reading the screen 7 4 3 2 1 6 5 1 S...

Switching between thedetailed information displayand the preset list display You can switch the left side of the basic screenaccording to your preference. % Touch [Preset] (or [Detail]). Each touch of [ Preset ] (or [ Detail ]) changes the detailed information display or preset listdisplay. Storing ...

2 Touch [Start] to start “ BSM ” . BSM begins to flash. While BSM is flashing, the six strongest broadcast frequencies will bestored under the preset tuning keys [ P1 ] to [ P6 ] in order of their signal strength. When this is complete, BSM stops flashing. p To cancel the storage process, touch[ Sto...

You can listen to the radio by using the naviga-tion system. This section describes operationsfor HD Radio reception. p For details concerning operation, refer tothe HD Radio tuner ’ s operation manual. % Touch [Digital Radio] on the “ AV Source ” menu to display the “ Digital Radio ” screen. = For ...

Switching between thedetailed information displayand the preset list display You can switch the left side of the basic screenaccording to your preference. % Touch [List] (or [Detail]). Each touch of [ List ] (or [ Detail ]) changes the detailed information display or preset list dis-play. Storing an...

2 Switching the seek mode = For details, refer to this page. 3 Tuning in strong signals = For details, refer to this page. 4 Switching the reception mode = For details, refer to this page. Storing the strongest broadcastfrequencies “ BSM ” (best stations memory) lets you auto- matically store the si...

You can listen to the radio using this naviga-tion system. This section describes operationsfor radio (AM). % Touch [AM] on the “ AV Source ” menu to display the “ AM ” screen. = For details concerning operations, refer to Screen switching over view on page 34. Reading the screen 5 4 1 2 3 1 Source ...

You can use the navigation system to controlan XM satellite digital tuner, which is sold se-parately.For details concerning operation, refer to theXM tuner ’ s operation manuals. This section provides information on XM operations withthe navigation system which differs from thatdescribed in the XM t...

Shows the detailed information of the broad-cast channel currently being received. Using the touch panel keys % Touch [XM] on the “ AV Source ” menu to display the “ XM ” screen. = For details concerning operations, refer to Screen switching over view on page 34. ALL CH MODE a 9 8 2 3 1 4 5 6 7 b CA...

3 While the input number is displayed, touch [Enter]. The XM channel that was entered is selected. 4 Touch . You return to the previous display. Displaying the Radio ID If you select CH: 000, the Radio ID is dis-played. 1 Touch [Direct]. 2 Input [000] and then touch [Enter]. If you select another ch...

Using “ My Mix ” function “ My Mix ” function memorizes the song title and artist name of the song currently being re-ceived. When the song that matches the mem-orized song title and artist name is beingbroadcast on a station other than the one youare listening to, you will be alerted, and youcan sw...

Using the “ Function ” menu 1 Touch [XM] on the “ AV Source ” menu to display the “ XM ” screen. = For details concerning operations, refer to Screen switching over view on page 34. 2 Touch [Func]. 1 1 Setting the memorized songs Setting the memorized songs Selecting the songs to alert The list of s...

You can use the navigation system to control aPioneer Sirius satellite digital tuner, which issold separately.For details concerning operation, refer to theSIRIUS tuner ’ s operation manuals. This sec- tion provides information on SIRIUS opera-tions with navigation system which differsfrom that desc...

Category Mode 3 4 1 2 d 6 7 8 c b a 9 1 Memorize the current song = For details, refer to Memorizing the song on the next page. 2 Switch the SIRIUS Instant replay mode = For details, refer to Using the “ Instant Replay ” function on page 138. 3 Recall equalizer curves = For details, refer to Recalli...

1 Touch [Direct]. 2 Input [000] and then touch [Enter]. If you select another channel, display of theRadio ID is canceled. Storing and recalling broadcaststations With a touch of any of the preset tuning keys[ P1 ] to [ P6 ], you can easily store up to six broadcast stations for later recall (also w...

Memorizing an traffic channel 1 Tune in to a traffic channel. 2 Touch and hold [TRAFFIC] for two sec- onds or more. The traffic channel will be memorized. p Even if you use this with the XM satelliteradio tuner, only one station can be memor-ized. The station memorized afterward willoverwrite the ex...

Setting the memorized songs Selecting the songs to alert Display the song title list memorized for theMyMix Function (MyMix list). You can changethe setting of the notification when the song isbroadcast again. You can enable or disable no-tification for each song. 1 Touch [Memo]. 2 Touch [ c Prev] o...

5 Touch [Alert On]. Changing the alert setting You can enable or disable the alert for selecteditems. This function is useful when to want toturn the alert off temporarily without changingthe setting of each selected team. 1 Touch [Game Alert]. 2 Touch [Alert On] or [Alert Off]. p Touch to toggle th...

You can display “ video image ” output by AV1 Input or AV2 Input to the screen of the navi- gation system. For details of the connectionmethod, refer to “ Installation Manual ” . CAUTION For safety reasons, video images cannot beviewed while your vehicle is in motion. To viewvideo images, you must s...

The term “ external unit ” refers to future Pioneer devices that are not currently plannedfor, or to devices that allow control of basicfunctions although they are not fully con-trolled by the navigation system. Two externalunits can be controlled by this navigation sys-tem. When two external units ...

The options in the “ Navi Settings ” menu Basic operations in the “ Navi Settings ” menu Preferences related to the navigation functionscan be set.A method for changing the volume setting forthe navigation guidance and beep is describedhere, along with an operational example. 1 Press the MENU button...

4 5 1 2 3 1 Positions of the GPS constellation being re-ceived by the navigation system Color Signal com-munication Used in posi-tioning Green Yes Yes Gray Yes No Red No No 2 Shows the current comprehensive accu-racy, altitude and speed. 3 Shows each satellite ’ s signal strength. 4 Shows the connec...

! “ Time ” Enables you to adjust the time difference byone hour. Touch a or b to adjust it. p “ Time Zone ” and “ Time ” are activated only when [ Off ] is selected. POI Settings 1 Touch [Map Visual] on the “ Navi Set- tings ” menu. The “ Map Visual Settings ” screen appears. 2 Touch [POI Settings]....

[ Night ]: Always displays the map in the color de-fined on “ Night color profile: ” . [ Day ]: Always displays the map in the color de-fined on “ Daylight color profile: ” . ! “ Elevation on 2D Map ” You can select whether to draws or refrainfrom drawing the terrain with a realisticlandscape on the...

Available options; ! “ Zoom-in limit: ” Allows you to set the limit for zoom-in beha-vior. ! “ Zoom-out limit: ” Allows you to set the limit for zoom-out be-havior. ! “ Restore Smart Zoom ” Allows you to set whether “ Smart Zoom ” is to be reactivated after changing the mapscale, tilt, or rotation.A...

Determines which condition takes priorityfor route calculation.[ Fast ]: Calculates a route with the shortest traveltime to your destination as a priority.[ Short ]: Calculates a route with the shortest dis-tance to your destination as a priority.[ Easy ]: Calculates a route to your destination with...

The speed limit is based on the map data-base. The speed limit in the database maynot match the actual speed limit of the cur-rent road. This is not a definite value. Besure to drive according to the actual speedlimit. ! “ Speeding Tolerance ” Sets the tolerance for the speed limitwith a percentage....

5 Touch the desired key to customize it. Available options; ! “ POI Icon Visibility Distance ” Touch this key to show options. Touch oneof them to set the desired visibility.When “ Satellite ” is selected, the POI icons will appear even though they are far awayfrom your current position. When “ Clos...

Editing your customized POI If you have already stored the customized POI,you can edit its POI properties. p If the custom POI is found on an externalstorage device (USB, SD), the navigationsystem will show a POI list which includesthem. 1 Touch [Map Visual] on the “ Navi Set- tings ” menu. The “ Ma...

3 Touch [Record] to activate the track log- ger. The key then changes to [ Stop Recording ]. Touching [ Stop Recording ] allows you to de- activate the track logger.Touching [ Export all track logs ] exports all track logs currently stored to the external sto-rage device (USB or SD) at once.In addit...

4 Touch the desired key to operate it. Available options; ! “ Update interval: ” Sets how often the system updates the log. ! “ Current autosave track size: ” Sets a size limit on automatic logging. Thissetting will be effective only when “ Enable Auto-saving ” is “ On ” . ! “ Enable Auto-saving ” S...

Selecting the language You can set the languages used on the pro-gram and voice guidance. Each language canbe set separately. p If you use voice operation, select [ English ] in [ Program language: ] of “ Language ” . If you select other languages, voice operationwill not be available. = For details...

p Imported original images will be stored inthe built-in memory, but the ability to savethese images cannot be guaranteed com-pletely. If your original image data is de-leted, insert the external storage device(USB, SD) again and re-import the originalimage. 1 Create a folder named “ Pictures ” on t...

Adjusting the responsepositions of the touch panel(touch panel calibration) If you feel that the touch panel keys on thescreen deviate from the actual positions thatrespond to your touch, adjust the response po-sitions of the touch panel screen. p Do not use a sharp pointed tool such as aballpoint p...

2 Touch the color you want. Current color balance Available options; ! Colored keys — Selects the desired preset color ! Memory 1 / Memory 2 / Memory 3 — Col- ors registered in the memory = For details, refer to Creating a user-de- fined color and storing it to memory on this page. ! Scan — Shifts b...

1 Touch [Restore/Delete] on the “ System Settings ” menu. 2 Touch [Restore Factory Settings] or [De- lete user information]. p Because deleted data cannot be restored,take extra care not to mistakenly deleteitems. 3 Touch [OK]. The navigation system will now restart. Turning off the screen By turnin...

“ Front:15 ” to “ Rear:15 ” is displayed as the front/rear speaker balance moves from front torear.Setting “ Front: ” and “ Rear: ” to “ 0 ” is correct when using a two speaker system. 3 Touch [ c ] or [ d ] to adjust left/right speaker balance. Each time you touch [ c ] or [ d ], the left/right spe...

— CD , ROM (for AVIC -X7115BT) — XM and SIRIUS — AV1 and AV2 — EXT1 and EXT2 ! The different source volume level can beset between iPod and USB . ! When [ Flat ] is selected, no supplement or correction is made to the sound. This isuseful to check the effect of the equalizercurves by switching alter...

p The different source volume level can be setbetween iPod and USB . p For AVIC -X9115BT, the source volume levelcan be set to DVD-V and DVD-VR respec- tively as well as differently from the othersources of the built-in DVD drive previouslymentioned. Enhancing bass ( Bass Booster ) The “ Bass Booste...

Each touch of [ AV2 Input ] changes the set- ting as follows: ! Off — No video component is connected ! Video — External video component p Use AV2 Input when connecting CD-RM10 (sold separately) through the external videocomponent. Switching the auto antennasetting If the blue lead of the navigation...

! ATT — Attenuation ! Normal — Volume does not change p Operation returns to normal when the cor-respond action is ended. p When “ SD ” or “ USB ” selected as the AV source, the sounds are not muted or attenu-ated even when the navigation guidanceand beep outputs. p When “ SD ” or “ USB ” is selecte...

To Ensure Safe Driving Some functions of the navigation system sup-ports voice operation. p The navigation function is not availableusing voice operation. CAUTION For your safety, avoid viewing the screen in thevoice operation as much as possible whiledriving. If you use voice operation, select [ En...

Starting voice operation % Press MULTI-CONTROL on map screen or the AV operation screen. The voice operation screen appears. Thescreen may vary depending on what screen isdisplayed at the time that you start voice oper-ation. If you lose your way... You can listen to the brief operating instruc-tion...

Available Basic Voice Commands The navigation system can also recognize thewords in the following list. Basic commands Voice commands and operations Back d Returns the previous screen. Cancel d Cancels the voice operation. Help d Outputs the brief operating instruction by voice. Voice operation for ...

Show playlists d Displays the playlist together with sub-screen to continue the voice operation. d Touch the de- sired item on the list or say the desired voice commands. Show the playlist <Playlist name> d Displays the song list of the selected playlist together with sub-screen to con- tinue ...

Voice commands related to hands-free phoning p You can make a phone call by voice dialingif the cellular phone featuring Bluetoothwireless technology is being paired withthe navigation system. p For <entry ’ s name> shown on the follow- ing chart, say the name of the entry storedin “ Contacts ...

Tips for Voice Operation For your voice commands to be correctly re-cognized and interpreted, ensure that condi-tions are suitable for recognition. Close the vehicle windows Please note that wind through the vehicle win-dow or miscellaneous noise from outside thevehicle can interfere with voice oper...

Setting the anti-theft function You can set a password for the navigation sys-tem. If the back-up lead is cut or the RESET button is pressed after the password is set, thenavigation system prompts for the passwordat the time of next boot up. Setting the password 1 With the map displayed, press the M...

Returning the navigationsystem to the default orfactory settings You can return settings or recorded content tothe default or factory settings. There are threemethods to clear user data, and the situationsand the cleared content are different for eachmethod. For information regarding the contentthat...

Setting items to be deleted The items to be deleted vary depending on thereset method. The items listed in the followingtable return to the default or factory settings. p Almost all items not listed below will be re-tained. However, some of the items to be re-turned to their default values are not l...

Troubleshooting If you have problems operating your navigation system, refer to this section. The most commonproblems are listed below, along with likely causes and solutions. While this list is not comprehen-sive, it should answer your most common problems. If a solution to your problem cannot befo...

Messages and how to react to them The following messages may be displayed by your navigation system. Refer to the table below toidentify the problem, then take the suggested corrective action.There are occasions when you may see error messages other than those shown here. In such acase, follow the i...

Messages for audio functions When problems occur with AV source playback, an error message appears on the display. Referto the table below to identify the problem, then take the suggested corrective action. If the errorpersists, record the error message and contact your dealer or your nearest Pionee...

Positioning technology AVIC -X9115BT accurately measures your cur-rent location by combining the positioning byGPS and by “ Dead Reckoning ” . AVIC -X7115BT accurately measures your cur-rent location by the GPS positioning. Positioning by GPS The Global Positioning System (GPS) uses anetwork of sate...

Map matching As mentioned, the positioning systems usedby this navigation system are susceptible tocertain errors. Their calculations may, on occa-sion, place you in a location on the map whereno road exists. In this situation, the processingsystem understands that vehicles travel onlyon roads, and ...

! If you are on a steep mountain road withmany height changes. ! If you enter or exit a multi-storey parking lotor similar structure using a spiral ramp. ! If your vehicle is turned on a turntable or si-milar structure. ! If your vehicle ’ s wheels spin, such as on a gravel road or in snow. ! If you...

Car train (start and end) Other information Supplemental information abouttraffic icon Icon Meanings Stop-and-go traffic Stopped traffic Closed/blocked roads Accidents, constructions, etc. Road works Road narrows, lane closures Warnings, other dangers Bad weather conditions Police ahead Handling and...

Playable discs DVD-Video and CD DVD and CD discs that display the logosshown below generally can be played on thisbuilt-in DVD drive. DVD-Video CD p is a trademark of DVD Format/Logo Licensing Corporation. p It is not possible to play DVD-Audio discs.This DVD drive may not be able to play alldiscs b...

Detailed information forplayable media Compatibility Common notes about disc compatibility ! Certain functions of this product may notbe available for some discs. ! Compatibility with all discs is not guaran-teed. ! It is not possible to play back DVD-ROM/DVD-RAM discs. ! Playback of discs may becom...

! There may be a slight delay when startingplayback of files on an external storage de-vice (USB, SD) with complex folder hierar-chies. ! Operations may vary depending on thekind of an external storage device (USB,SD). ! It may not be possible to play some musicfiles from SD or USB because of file c...

Media compatibility chart General Media CD-R/-RWAVIC-X7115BT CD-R/-RWAVIC-X9115BT DVD-R/-RW/-R DLAVIC-X9115BT USB storagedevice(All models) SD memorycard(All models) File system ISO9660 level 1,ISO9660 level 2,Romeo and Joliet ISO9660 level 1,ISO9660 level 2,Romeo, Jolietand UDF 1.02 FAT16/FAT32 Max...

WMA compatibility Media CD-R/-RWAVIC-X7115BT CD-R/-RWAVIC-X9115BT DVD-R/-RW/-R DLAVIC-X9115BT USB storagedevice(All models) SD memorycard(All models) File extension .wma Bit rate 48 kbps to320 kbps (CBR),VBR 5 kbps to 320 kbps (CBR), VBR Ver. 9: 5 kbps to 320 kbps (CBR),VBRVer. 7 or 8: 128 kbps to 1...

AAC compatibility Media CD-R/-RWAVIC-X7115BT CD-R/-RWAVIC-X9115BT DVD-R/-RW/-R DLAVIC-X9115BT USB storagedevice(All models) SD memorycard(All models) File extension .m4a Bit rate 16 kbps to 320 kbps (CBR) 8 kbps to 320 kbps (CBR) Sampling frequency 11 kHz to44.1 kHz 8 kHz to 44.1 kHz Notes: ! The na...

AVI compatibility Media CD-R/-RWAVIC-X7115BT CD-R/-RWAVIC-X9115BT DVD-R/-RW/-R DLAVIC-X9115BT USB storagedevice(All models) SD memorycard(All models) File extension AVI files cannot be played on the built-in drive. .avi Compatible videocodec MPEG-4 Compatible audiocodec ADPCM Recommendedvideo specif...

! Regardless of the length of blank sectionbetween the songs of original recording,compressed audio discs play with a shortpause between songs. Example of a hierarchy The following figure is an example of the tierstructure in the disc. The numbers in the fig-ure indicate the order in which folder nu...

! Do not leave the iPod in direct sunlight for ex-tended amounts of time. Extended exposureto direct sunlight can result in iPod malfunc-tion due to the resulting high temperature. ! Do not leave the iPod in any location withhigh temperatures. ! Firmly secure the iPod when driving. Do notlet the iPo...

Display information Destination Menu Page [ Address ] 42 [ POI ] [ Around Current GPS Location ] 45 [ Around Destination ] 45 [ Around Cursor ] 44 [ Along Route ] 45 [ Around entered address ] 45 [ Saved Criteria ] 47 [ Register Search Criteria ] 46 [ Favorites ] 50 [ History ] 50 [ USB/SD ] 48 [ Re...

Settings Menu Navi Settings Page [ GPS & Time Settings ] 144 [ Time Settings ] 145 [ Map Visual ] [ POI Settings ] 151 [ 3D Settings ] 146 [ Map Settings ] 146 [ Displayed Info ] 147 [ Smart Zoom ] 147 [ Overview Mode ] 148 [ Manage Track Logs ] 153 [ Route ] [ Method: ] 148 [ U-turn penalty: ] ...

System Settings menu Page [ Language ] 156 [ Splash Screen ] 156 [ Back Camera ] 157 [ Screen Calibration ] 158 [ Picture Adjustment ] 158 [ Illumi Color ] 158 [ Service Information ] 159 [ Restore/Delete ] [ Restore Factory Settings ] 159 [ Delete user information ] 159 [ Screen Off ] 160 AV System...

AV Sound Settings menu Page [ FAD/BAL ] ([ Balance ]) 160 [ EQ ] 161 [ Loudness ] 162 [ Sub Woofer ] 163 [ HPF ] 163 [ SLA ] 163 [ Bass Booster ] 164 Shortcut menu Map Confirmation Screen Page [ Map ] 52 [ Save as... ] 55 [ Add Pin ] 56 [ Add POI ] 57 [ Add Favorite ] 58 [ Route... ] 54 [ Go Here No...

Glossary AAC AAC is short for Advanced Audio Coding andrefers to an audio compression technologystandard used with MPEG-2 and MPEG-4. Aspect ratio This is the width-to-height ratio of a TV screen.A regular display has an aspect ratio of 4:3.Wide screen displays have an aspect ratio of16:9, providing...

Region number ........................ 1Signal format: Sampling frequency ..... 44.1 kHz/48 kHz/96 kHzNumber of quantization bits ........................................... 16 bit/20 bit/24 bit; linear Frequency response ............... 5 Hz to 44 000 Hz (with DVD, at sampling frequency96 kHz) Sign...

PIONEER CORPORATION 4-1, MEGURO 1-CHOME, MEGURO-KUTOKYO 153-8654, JAPAN PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/BelgiqueTEL: (0) 3/570.05.11 PIONEER ELECTRONICS AS...