Pioneer AVIC W8500NEX - Manuals
Pioneer AVIC W8500NEX – User Manual, Manual in PDF format online.
Manuals:
User Manual Pioneer AVIC W8500NEX
Summary
Eng lis h - 2 - Important ■ Precaution ......................... 5 Notes on internal memory........................................ 5About this manual ....................................................... 5 ■ Parts and controls ............. 6 Main unit ...............................................
Eng lis h - 5 - • If the battery is disconnected or discharged, the memory will be erased and must be reprogrammed. • The information will be erased by disconnecting the yellow lead from the battery (or removing the battery itself ). • Some of the settings and recorded contents will not be reset. Th...
- 6 - Eng lis h Parts and controls Main unit W8500NEX W6500NEX
Eng lis h - 7 - LCD screen VOL (+/ - ) Press to switch between the Application screen and the AV operation screen.Press and hold to switch to the camera view mode. NOTE To activate the camera view mode with this button, set [Back Camera Input] to [On] or [AV Input] to [Camera] (page 132). Press to d...
- 8 - Eng lis h CAUTION • Do not expose the detachable faceplate to excessive shock or disassemble it. • Never grip the buttons tightly or use force when removing or attaching the detachable faceplate. • Keep the detachable faceplate out of reach of small children to prevent them from placing it in ...
Eng lis h - 9 - 1 Press the button. 2 Gently grip the bottom of the detachable faceplate and slowly pull it outward. Detachable faceplate 1 Slide the detachable faceplate all the way into this product. 2 Push the lower part of the detachable faceplate until you hear a click. Removing the detachable ...
- 10 - Eng lis h WARNING • Keep hands and fingers clear of this product when opening, closing, or adjusting the LCD panel. Be especially cautious of children’s hands and fingers. • Do not use with the LCD panel left open. It may result in injury in the event of an accident. • Close the LCD panel bef...
Eng lis h - 11 - 2 Press RESET with a pen tip or other pointed tools. Settings and recorded contents are reset to the factory settings. Remove the insulation sheet before use. WARNING • Do not ingest the battery, Chemical Burn Hazard.( The remote control supplied with) This product contains a coin/b...
- 12 - Eng lis h Point the remote control in the direction of the front panel to operate. NOTE The remote control may not function properly in direct sunlight. Important • Do not store the remote control in high temperatures or direct sunlight. • Do not let the remote control fall onto the floor, wh...
Eng lis h - 13 - NOTE Once the speaker mode is set, the setting cannot be changed unless this product is restored to the default settings. Restore the default settings to change the speaker mode setting (page 157). To change the speaker mode, you need to restore this product to the default settings....
- 14 - Eng lis h 9 Touch [Finish]. You can operate this product by touching the keys on the screen directly with your fingers. NOTE To protect the LCD screen from damage, be sure to touch the screen only with your finger gently. : Returns to the previous screen.: Close the screen. Using the touch pa...
Eng lis h - 15 - 1 Press . The menu bar pops up on the screen. NOTE The menu bar availability may vary depending on the activating source. 1 Touch or . Operating the time bar You can change the playback point by dragging the key. The playback time corresponding to the position of the key is displaye...
- 16 - Eng lis h The hidden function keys appear. NOTE This key does not appear for some AV sources. Operating the on-screen keyboard Displays the characters that are entered. Moves the cursor to the right or left for a number of characters equivalent to the number of touches. Enters the characters ...
Eng lis h - 17 - Top menu screen Favorite source icons TIPS • When you connect the external navigation system to this unit, the navigation mode key is displayed at the middle of the right side of the display. • If you select [Power OFF], you can turn off almost all functions. The [Power OFF] mode is...
Eng lis h - 19 - 1 Press . 2 Touch . The main menu screen appears. Main screen Navigation Menu screen view and operations Returns to the map screen. Notifications that contain important information. Displays the previous or next page of the navigation menu. The locations that you saved as favorites....
- 20 - Eng lis h Most of the information provided by your navigation system can be seen on the map. You need to become familiar with how information appears on the map. Navigation items Searches for a destination using various methods (page 26). Builds your route or edits the route currently set (pa...
Eng lis h - 21 - NOTE Depending on the conditions and settings, some items may not be displayed. * The information appears only when a route is set. ▶ AV information bar AV information is displayed at the bottom of the map screen. How to read the map screen * Shows the number and name of the street ...
- 22 - Eng lis h By default, even if the map scale is changed on the scrolled map, it will return to the preset scale (according to the setting in [Viewpoint] of the [Navigation Map] settings) when the current position map is displayed. To change the scale of the current position map, perform the fo...
Eng lis h - 23 - a distance, it will zoom out and lower the view angle to be flat so you can see the road in front of you. • When the route is not set:"Smart Zoom" will zoom in if you drive slowly and zoom out when you drive at high speed. You can switch how the map is displayed. For 2D map ...
- 24 - Eng lis h 3 Touch . The map returns to the current position. TIP If you press , the map returns to the current position. ▶ Control keys on the scrolled map Map screen (scrolled map) Once the route guidance begins, the system provides various guides by voice, text indications and signs. ▶ Freq...
Eng lis h - 25 - NOTE If the data for these items is not contained in the map data, the information is not available even if there are signs on the actual road. TIP When you set [Offer Freeway Services] to on, appears while you are driving on freeways. Touch the icon to open the details of the next ...
- 26 - Eng lis h • When the route is set:Distance to final destination, time needed to reach the final destination and estimated arrival time are shown. • When the route is not set:Direction or altitude is shown. NOTES • Touching and holding the field allows you to display the setting screen for the...
- 28 - Eng lis h Search a destination in which the address is specified. TIP Depending on the search results, some steps may be skipped. 1 Touch [Address]. 2 Select the [Country]. Proposes the country where you are as a default.If you want to change the search area, set another country. 3 Select the...
- 30 - Eng lis h listed in order of the distance from the destination. (This key is active only when the route is set.) • [Along Route]:Searches along the current route, and not around a point already set. This is useful when searching for a stopover that results in a minimal detour, such as searchi...
Eng lis h - 31 - 3 Touch [Show Route]. 4 Touch [Start Navigation]. TIP You can change the final destination or add waypoints in [Route Planner] (page 34). The places that were previously set as destinations or waypoints have been automatically stored in [History]. 1 Touch [History]. 2 Touch the entr...
- 32 - Eng lis h 2 Enter the latitude value and touch [OK]. TIP When entering the coordinates in UTM format, touch , then [UTM Coordinates]. 3 Enter the longitude value and touch [GO!]. The searched location appears on the map screen. 4 Touch [Select as Destination]. TIP You can change the display f...
- 34 - Eng lis h 1 Once the destination is selected, touch [Select as Destination]. The route summary screen appears and countdown begins. When the countdown ends, the guidance automatically starts. If you touch the screen anywhere during the countdown, the countdown stops and the screen will stay a...
- 36 - Eng lis h The system starts route recalculation after [Show Route] is touched, and then the [Route Summary] screen appears. After [Start Navigation] is touched, your navigation system starts the route guidance. NOTE After [Continue Without Route] is touched, the current position map appears. ...
Eng lis h - 37 - TIP If more than three route alternatives have been found, [More Results] appears. Touch [More Results] to show the other routes. 5 Touch [Select]. The selected route is applied as your current route. For more information about route calculation conditions, refer to [Route Planning ...
- 38 - Eng lis h NOTE The route set by [Alternative Routes] cannot be canceled. Once you set the route, you can check a summary of the current route. 1 Press then touch . 2 Touch [Route Summary]. 3 Touch one of the options. The condition of the displayed route is shown in the upper left by an icon. ...
Eng lis h - 39 - If you no longer need to travel to your destination, follow the steps below to cancel the route guidance. 1 Press then touch . 2 Touch [Cancel Route] or [Delete Waypoint]. 3 Touch one of the options. If there are no waypoints on the route, touch [Cancel Route] to cancel the route.If...
- 40 - Eng lis h Storing your favorite locations in [Saved Location] allows you to save the time and effort used on re-entering this information.[Saved Location] can include your home location, workplace, and places you have already registered. You can store one home location and one workplace locat...
Eng lis h - 41 - 1 Press then touch . 2 Touch [New Route], and then [Saved Location]. 3 Touch , and then touch [Edit]. The [Select Location to Edit] screen appears. 4 Touch the item you want to rename and touch [Rename]. 5 Enter the name and then touch . 6 Touch [Done]. NOTE [Home] and [Work] cannot...
- 42 - Eng lis h NOTE To use this function, activate the warnings beforehand and set the alert types (page 55). 1 Press . 2 Scroll the map and select a location. The cursor appears at the selected point. 3 Touch . 4 Touch [Add Alert Points]. 5 Set the necessary parameters. 6 Touch [Save]. Editing th...
Eng lis h - 43 - 3 Touch [Route Summary], and then touch . 4 Touch [Save Route]. 5 Enter the name if needed and then touch . 1 Press then touch . 2 Touch [New Route], and then . 3 Touch [Saved Routes]. 4 Touch , and then touch [Edit]. 5 Touch the item you want to rename and touch [Rename]. 6 Enter t...
- 44 - Eng lis h 1 Press then touch . 2 Touch [Traffic]. The [Traffic Summary] screen appears. Traffic information is displayed onscreen in a list. This allows you to check how many traffic incidents have occurred, the locations, and the distance from your current position. 1 Press then touch . 2 To...
- 46 - Eng lis h You can check the details of the traffic incidents. Touch the relevant event to display the location on the map. The traffic information feature is turned on by default. To enable or disable the TMC feature, perform the following procedure. NOTE If you turn the traffic information f...
Eng lis h - 47 - Activating the trip logger enables you to record your driving history (hereinafter called “trip log”). You can review your trip log later. The trip logger is set so that it can be started manually by default. You can change the settings of this function in order to save the log auto...
Eng lis h - 49 - TIP If you touch and then touch [Delete All], all entries can be deleted. 6 Touch [Done]. In the trip computer screen, the information received from the GPS receiver and your vehicle is displayed like a meter for a vehicle. 1 Press . 2 Touch the data field key. TIPS • If you touch [...
Eng lis h - 51 - 7 Enter the name, date, and mileage for the reminder. 8 Touch [Done]. TIP To delete an entry, touch to display the shortcut for deletion. You can configure the navigation settings, and modify the behavior of this system. 1 Press then touch . 2 Touch , and then touch [Settings]. The ...
Eng lis h - 61 - Turns automatic trip log saving on or off and checks the current size of the trip database. Modifies the basic software parameters used during the initial setup process. Starts the synchronization tool, which makes it possible to update your maps (page 61). You can update existing c...
- 62 - Eng lis h 1 Turn on the Bluetooth function on the device. 2 Press . 3 Touch then . The Bluetooth screen appears. 4 Touch [Connection]. 5 Touch . The unit starts to search for available devices, then displays them in the device list. 6 Touch the Bluetooth device name. After the device is succe...
Eng lis h - 63 - To use this function you need to connect your cellular phone to this product via Bluetooth in advance (page 62). CAUTION For your safety, avoid talking on the phone as much as possible while driving. 1 Press . 2 Touch . The phone menu screen appears. 3 Touch one of the call icons on...
Eng lis h - 65 - ▶ Registering a phone number You can easily store up to six phone numbers per device as presets. 1 Press . 2 Touch . 3 Touch or . On the [Phone Book] screen, touch the desired name to display the contact’s phone number. 4 Touch . ▶ Dialing from the preset dial list 1 Touch . 2 Touch...
- 66 - Eng lis h • For using this function with a smartphone, the device must be compatible with Android Auto. For using the voice recognition function with a smartphone, launch Android Auto beforehand. 1 Press . 2 Touch . 3 Touch . The voice recognition function launches and the voice control scree...
Eng lis h - 67 - This product can be adjusted to the other party’s listening volume. 1 Touch to switch between the three volume levels. ▶ General notes • Connection to all cellular phones featuring Bluetooth wireless technology is not guaranteed. • The line-of-sight distance between this product and...
- 68 - Eng lis h • If the phone book in the phone contains image data, the phone book may not be transferred correctly. • Depending on the cellular phone, phone book transfer may not be available. Before using the Bluetooth audio player, register and connect the device to this product (page 62). NOT...
Eng lis h - 69 - Bluetooth audio playback screen 2 Switches between playback and pause. Skips files forward or backward.• By pressing then touch or , you can also skip files forward or backward. • By pressing then touch and hold or , you can also perform fast reverse or fast forward. Selects a file ...
- 72 - Eng lis h You can play or use the following sources with this product. • HD Radio Broadcasts (HD Radio™ tuner) • CD • ROM (compressed audio or video files on discs) • DVD-Video • Video-CD The following sources can be played back or used by connecting an auxiliary device. • USB • SD* • iPod • ...
Eng lis h - 73 - 1 Press then touch . 2 Touch the source icon. When you select [Source OFF], the AV source is turned off. 1 Press then touch the AV operation key. 2 Touch . 3 Touch the source key. When you select [Source OFF], the AV source is turned off. NOTE This function is available only when yo...
- 74 - Eng lis h 1 Press then touch . 2 Touch and hold the source icon and drag the icon to the desired position. 1 Press then touch the AV operation key. 2 Touch . 3 Touch . 4 Drag the source key to the desired position. NOTE This function is available only when you stop your vehicle in a safe plac...
Eng lis h - 77 - HD Radio stations offer high quality audio and data services. HD Radio stations are brought to you by your local FM or AM stations.HD Radio stations feature the following: • High quality audio • FM multicasting • Data service Digital, CD-quality sound. HD Radio Technology enables lo...
- 78 - Eng lis h Program Service Data: Contributes to the superior user experience of HD Radio Technology. Presents song name, artist, station IDs, HD2/HD3 Channel Guide, and other relevant data streams. Adjacent to traditional main stations are extra local FM channels. These HD2/HD3 Channels provid...
Eng lis h - 79 - TIPS • By pressing then touch or , you can also switch the preset channels. • By pressing then touch and hold or and releasing it, you can also perform seek tuning. The BSM (best stations memory) function automatically stores the six strongest broadcast frequencies under the preset ...
- 80 - Eng lis h 1 Press . 2 Touch then . The system setting screen appears. 3 Touch [AV Source Settings]. 4 Touch [Radio Settings]. The menu items vary according to the source. Radio settings Menu Item Description [Blending] [On] [Off] Switches to the analog broadcast of the same frequency level au...
Eng lis h - 81 - You can play a normal music CD, Video-CD, or DVD-Video using the built-in drive of this product. WARNING Keep hands and fingers clear of this product when opening, closing, or adjusting the LCD panel. Be especially cautious of children’s hands and fingers. CAUTION Do not insert anyt...
- 82 - Eng lis h 1 Press . TIPS • By pressing then touch or , you can also skip files/chapters forward or backward. • By pressing then touch and hold or , you can also perform fast reverse or fast forward. • If a Video-CD with PBC (playback control) On is being played, appears. • You can set the scr...
Eng lis h - 83 - Audio source screen 2 CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake. Video source screen 1 Sets a repeat play for the current disc/the current track. Plays or does not...
Eng lis h - 85 - Video source screen 2 Selects the audio output from [L+R], [Left], [Right], [Mix]. This function is available for Video-CDs and DVDs recorded with LPCM audio. Changes the viewing angle (Multi-angle). This function is available for DVDs featuring multi-angle recordings. Sets a repeat...
- 86 - Eng lis h SD function is only available for AVIC-W8500NEX. You can play compressed audio, compressed video, or still image files stored in a disc or an external storage device. WARNING Keep hands and fingers clear of this product when opening, closing, or adjusting the LCD panel. Be especiall...
Eng lis h - 87 - 1 Press . 2 Touch to open the LCD panel. 3 Remove the disc and press . 1 Press . 1 Press . 2 Touch to open the LCD panel. 3 Insert an SD memory card into the SD card slot. 4 Press . NOTES • This system is not compatible with the Multi Media Card (MMC). • Compatibility with all SD me...
- 88 - Eng lis h • Connection via a USB hub is not possible. • A USB cable is required for connection. 1 Pull out the USB storage device from the USB cable. NOTES • Check that no data is being accessed before pulling out the USB storage device. • Turn off (ACC OFF) the ignition switch before unplugg...
- 92 - Eng lis h TIPS • Image files are not displayed in the rear display. • By pressing then touch and hold or on the still image file, you can search through 10 image files at a time. If the file currently being played is the first or last file in the folder, the search is not performed. Performs ...
Eng lis h - 93 - Still image screen Hides the touch panel keys. To display the keys again, touch anywhere on the screen. Switches between playback and pause. Switches the following media file types.[Music]: Compressed audio files [Video]: Compressed video files [Photo]: Image files Skips files forwa...
- 94 - Eng lis h When connecting an iPod to this product, the settings are automatically configured according to the device to be connected. NOTES • Depending on the generation or version of the iPod, some functions may not be available. • Do not delete the Apple Music® app from your iPod since some...
- 96 - Eng lis h Audio source screen 2 Important Apple Music Radio may not be available in your country or region. For details about Apple Music Radio, visit the following site: http://www.apple.com/music/ NOTE This function is only available when using the iPod function with an iPhone 7, iPhone 7 P...
Eng lis h - 97 - Apple Music Radio screen Switches between playback and pause. Displays the pop-up menu for Apple Music Radio.• Touch [Play More Like This] to play back songs similar to the current song. • Touch [Play Less Like This] to set it not to play back the current song again. • Touch [Add to...
- 98 - Eng lis h WebLink lets you enjoy compatible smartphones apps in the car. You can operate WebLink compatible applications with finger gestures such as tapping, dragging, scrolling, or flicking on the screen of this product. NOTES • The supported finger gestures may vary depending on the WebLin...
Eng lis h - 99 - WebLink 1 Connect your iPhone to this product via USB. Refer to the Installation Manual. 2 Press . 3 Touch . 4 Touch [WebLink]. 5 Touch desired icon in the tab. The WebLink app is launched. NOTE The video playback capability depends on the connected Android device. 1 Unlock your sma...
- 100 - Eng lis h You can output the audio mixing AV source and an application for iPhone or smartphone when WebLink is used. NOTE Depending on the application or AV source, this function may not be available. 1 Start up the WebLink. 2 Press VOL (+/-). The audio mix menu will be displayed on the scr...
Eng lis h - 101 - You can operate iPhone applications with finger gestures such as tapping, dragging, scrolling, or flicking on the screen of this product. Compatible iPhone models For details about compatibility of iPhone models, refer to the following website.http://www.apple.com/ios/carplay NOTE ...
- 102 - Eng lis h 3 Touch [Smartphone-related Settings]. 4 Touch [Driving Position]. [ Left ] Select for a left-hand drive vehicle.[ Right ] Select for a right-hand drive vehicle. When connecting an iPhone to this product, settings are required according to the connected device. For details, refer t...
Eng lis h - 103 - The unit configures the connection then start the application. TIP You can also start Apple CarPlay with a desired device by opening the Bluetooth or Apple CarPlay setting menu while displaying the device search or device list screen. TIP You can use Siri function by pressing once ...
- 104 - Eng lis h You can operate Android applications with finger gestures such as tapping, dragging, scrolling, or flicking on the screen of this product. Compatible Android devices For details about compatibility of Android models, refer to the following website.https://support.google.com/android...
- 106 - Eng lis h 5 Touch a desired device on the screen. The unit configures the connection then start the application. TIP You can use voice recognition function by pressing once Android Auto is activated. NOTES • For details on USB connection, refer to the Installation Manual. • If twenty devices...
- 108 - Eng lis h Pandora Music is a music service not affiliated with Pioneer. More information is available at http://www.pandora.com.The Pandora mobile application is available for iPhone and smartphones. Please visit www.pandora.com/everywhere/mobile for the latest compatibility information. WAR...
Eng lis h - 109 - • For details on USB connection, refer to the Installation Manual. Playback screen 1 Basic operation Recalls the preset station stored to a key from the memory. Stores the current station to a key. Displays the preset station list. Select an item on the list ([1] to [6]) to switch ...
- 110 - Eng lis h * and are not available when using a shared station. Playback screen 2 Selects a Pandora station from the list.• : Switches to the station list. • : Switches to the genre list. • : Plays only one track based on particular musical characteristics from several shuffled stations. • : ...
Eng lis h - 111 - Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy, and entertainment. Welcome to the world of satellite radio. A SiriusXM Connect Vehicle Tuner and Subscrip...
- 112 - Eng lis h • The activation process usually takes 10 to 15 minutes, but it may take up to an hour. Your radio will need to be powered on and receiving the SiriusXM signal to receive the activation message. 1 Press then touch . 2 Touch [SiriusXM]. TIPS • By pressing then touch or , you can mov...
- 114 - Eng lis h Replay Mode (Time bar display) When you activate the TuneScan™ feature, you will hear a few seconds of the songs which have not been listened to from each of the music channels stored as presets on the current band. NOTES • When fewer than two music channels are stored as presets, ...
Eng lis h - 115 - • TuneScan™ may take a few minutes to become available after the product is turned on or the preset band is changed. • Tune Scan™ is compatible with SXV200 or later tuner models (sold separately). 1 Touch to display the following display. SportsFlash™ will notify you when a big pla...
- 116 - Eng lis h Featured Favorites are groups of channels that are created by the SiriusXM Programming department allowing you to discover new channels. Featured Favorite channels are dynamic and can change often, allowing you to discover new channels. For details, see [Featured Favorites] and [Fe...
Eng lis h - 117 - TIP To set the alert function, you can set up at [Alert List] (page 117) in the [SiriusXM Settings]. 1 Press . 2 Touch then . The system setting screen appears. 3 Touch [AV Source Settings]. 4 Touch [SiriusXM Settings]. The menu items vary according to the source. SiriusXM settings...
Eng lis h - 119 - CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake. NOTE A High Speed HDMI® Cable (sold separately) is required for connection. For details, refer to the Installation Manu...
- 120 - Eng lis h You can display the video image output by the device connected to video input. CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake. NOTES • A Mini-jack AV cable (sold separ...
Eng lis h - 121 - AUX screen Basic operation Hides the touch panel keys. To display the keys again, touch anywhere on the screen. TIP You can set the screen size for the video image (page 154). Switches between the video input and audio input.
- 122 - Eng lis h You can display the video image output by the device connected or the camera to video input. For details, refer to the Installation Manual. CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and appl...
Eng lis h - 123 - AV source screen Basic operation Hides the touch panel keys. To display the keys again, touch anywhere on the screen.
- 124 - Eng lis h (This function is available only for Android device.)Wireless Mirroring is a wireless display designed to mirror your mobile device on this product screen via Wi-Fi connection. Wireless Mirroring operations and procedures vary depending on the connected mobile device. Refer to the ...
- 126 - Eng lis h You can access the satellite radio source provided for the vehicle. The vehicle information and many OEM systems such as steering wheel controls, warning chimes, driver safety systems, and etc. can be displayed on this product by connecting the optional iDatalink adapter. It is als...
Eng lis h - 127 - 2 Access the following website and follow the on-screen instructions to configure the desired firmware. http://maestro.idatalink.com/ NOTE When the serial number input is required, input the device number of this product. 3 Install the vehicle/head unit specific firmware on your iD...
- 128 - Eng lis h Gauges screen Vehicle Information screen Displays the Gauge screen. Displays the Vehicle Information screen. Displays the Climate screen. Displays the Parking Assist screen.
Eng lis h - 129 - Climate screen Parking Assist screen CAUTION This function is intended solely to assist the driver’s vision. It does not detect all dangers and obstacles and is not a substitute for your attentiveness, judgment, and care while parking your vehicle. NOTE This function is only availa...
Eng lis h - 131 - You can adjust various settings in the main menu. 1 Press . 2 Touch . 3 Touch one of the following categories, then select the options. System settings (page 131) Theme settings (page 141) Audio settings (page 143) Video settings (page 150) Bluetooth settings (page 62) The menu ite...
Eng lis h - 141 - CAUTION Do not turn off the engine while importing an image from the external storage device. The menu items vary according to the source. Theme settings Menu Item Description [Background] [Home] [AV] Select the wall paper from the preset items in this product or original pictures ...
- 142 - Eng lis h * The external storage device is inserted or plugged in in advance to customize the image (page 86). You can export settings you have made on the [Theme] screen to an external storage device. Also, you can import them from an external storage device. CAUTION Do not turn off the eng...
Eng lis h - 143 - 2 Press . 3 Touch then . 4 Touch [Export]. 5 Touch the item you want export. [Illumination][Theme][Splash Screen][Select All] 6 Touch [Export]. ▶ Importing Theme settings 1 Set the external storage device (page 86). A message confirming whether to import the stored setting data app...
Eng lis h - 147 - *2 If you change the listening position setting, the output levels of all the speakers will change in conjunction with the setting. *3 To use this function, the vehicle’s acoustics must be measured in advance.*4 This function is available only when the [Listening Position] setting ...
Eng lis h - 149 - NOTE Use an extension cable (sold separately) if the cord of the microphone (sold separately) is not long enough. 10 Touch [Front Left] or [Front Right] to select the current listening position. 11 Touch [Start]. A 10-second countdown starts. NOTE The Bluetooth connection is discon...
- 150 - Eng lis h The menu items vary according to the source. This setting is available only when [Disc] is selected as the source. Switches the subwoofer phase between normal and reverse position. LPF/HPF Switches the LPF/HPF setting to [On] or [Off]. When it is turned off, the high-pass filter or...
Eng lis h - 153 - Registering your favorite menu items in shortcuts allows you to quickly jump to the registered menu screen by a simple touch on the [Favorites] screen. NOTE Up to 12 menu items can be registered in the favorite menu. 1 Press then touch . 2 Touch the star icon of the menu item. The ...
- 154 - Eng lis h 1 Touch the current time on the screen. 2 Touch one of the items to adjust. • You can change the time display format to [12hour] or [24hour]. • You can change the order of date display format: Day-month, Month-day. You can set the screen mode for AV screen and image files. 1 Touch ...
Eng lis h - 155 - TIPS • Different settings can be stored for each video source. • When a video is viewed in wide screen mode that does not match its original aspect ratio, it may appear different. • The video image will appear coarser when viewed in [Zoom] mode. NOTES • Image files can be set to ei...
- 156 - Eng lis h * AVIC-W8500NEX You can set a password for this product. If the back-up lead is cut after the password is set, this product prompts for the password at the time of next boot up. Important If you forgot your password, contact the nearest authorized Pioneer Service Station. 1 Press ....
Eng lis h - 157 - The current password and password hint can be deleted. 1 Press . 2 Touch then . 3 Touch 1, followed by 2, and then touch 3 (page 156). 4 Touch [Clear Password]. 5 Touch [Yes]. 6 Touch [OK]. 7 Enter the current password. 8 Touch [Go]. A message indicating that the security setting i...
Eng lis h - 158 - If you have problems operating this product, refer to this section. The most common problems are listed below, along with likely causes and solutions. If a solution to your problem cannot be found here, contact your dealer or the nearest authorized Pioneer service facility. A black...
Eng lis h - 160 - back of the receiver. (Refer to the installation manual.) → The reverse lead on the receiver may not be connected to the proper wire at the reverse lamp.– Check the connection and make sure that the violet/white lead of the receiver is connected to the lead whose voltage changes wh...
Eng lis h - 161 - occurs when the reverse gear polarity setting of this product is incorrect.– Check the polarity and re-select the correct setting. When problems occur with this product, an error message appears on the display. Refer to the table below to identify the problem, then take the suggest...
Eng lis h - 162 - Detected changes in the installation angle or position. The in-dash receiver is updating the sensor learning data. → Changes in the installation angle or position are detected.– Wait until the sensor learning finishes. Speed pulse wire is not connected. The system will operate in s...
Eng lis h - 167 - the screen. If the error message is still displayed after performing on-screen instructions, please reconnect the device. The Global Positioning System (GPS) uses a network of satellites orbiting the Earth. Each of the satellites, which orbit at a height of 68 900 000 feet (21 000 ...
Eng lis h - 168 - the sensor status and it may recover the accuracy to normal condition (page 139). Map matching As mentioned, the positioning systems used by this navigation system are susceptible to certain errors. Their calculations may, on occasion, place you in a location on the map where no ro...
Eng lis h - 172 - If you join the road after driving around a large parking lot. When you drive around a traffic circle. When starting driving immediately after starting the engine. Your navigation system sets a route to your destination by applying certain built-in rules to the map data. This secti...
Eng lis h - 173 - • When there is a traffic congestion ahead, a detour route may not be suggested if driving through the traffic congestion would still be better than taking the detour. • There may be instances when the starting point, the waypoint and the destination point are not on the highlighte...
Eng lis h - 174 - • is a trademark of DVD Format/Logo Licensing Corporation. • It is not possible to play DVD Audio discs. This DVD drive may not be able to play all discs bearing the marks shown above. This unit is not compatible with discs recorded in AVCHD (Advanced Video Codec High Definition) f...
Eng lis h - 177 - • If multiple subtitles are programmed to display within a very short time frame, such as 0.1 seconds, the subtitles may not be displayed at the correct time. SD function is only available for AVIC-W8500NEX. General • Files may not be played back properly depending on the environme...
Eng lis h - 181 - INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TO...
Eng lis h - 184 - Remember that use of this system for commercial or public viewing purposes may constitute an infringement on the author’s rights as protected by the Copyright Law. This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property ri...
Eng lis h - 185 - • Never touch the LCD screen with anything besides your finger when operating the touch panel functions. The LCD screen can scratch easily. • If the LCD screen is near the vent of an air conditioner, make sure that air from the air conditioner is not blowing on it. Heat from the he...
2 X:\print\Pioneer\19AJ\NAVI\19_Navi_UC_QRD3724(A5_Horizon)_INST\020Chapter_EN.fm AVIC-W8500NEX/AVIC-W6500NEX 19_Navi_UC_QRD3724(A5_Horizon) En WARNING Rear visibility systems (backup cameras) are required in certain new vehicles sold in the U.S. and Canada. U.S. regulations began according to a two...
3 X:\print\Pioneer\19AJ\NAVI\19_Navi_UC_QRD3724(A5_Horizon)_INST\020Chapter_EN.fm AVIC-W8500NEX/AVIC-W6500NEX 19_Navi_UC_QRD3724(A5_Horizon) En Eng lish CAUTION • If you decide to perform the installation yourself, and have special training and experience in the mobile electronics installations, ple...
4 X:\print\Pioneer\19AJ\NAVI\19_Navi_UC_QRD3724(A5_Horizon)_INST\020Chapter_EN.fm AVIC-W8500NEX/AVIC-W6500NEX 19_Navi_UC_QRD3724(A5_Horizon) En WARNING • To avoid the risk of accident and the potential violation of applicable laws, this product should never be used while the vehicle is being driven ...
5 X:\print\Pioneer\19AJ\NAVI\19_Navi_UC_QRD3724(A5_Horizon)_INST\020Chapter_EN.fm AVIC-W8500NEX/AVIC-W6500NEX 19_Navi_UC_QRD3724(A5_Horizon) En Eng lish Perform these connections when using a subwoofer without the optional amplifier. To power supply Power cord Left Right Front speaker (STD) or high ...
6 X:\print\Pioneer\19AJ\NAVI\19_Navi_UC_QRD3724(A5_Horizon)_INST\020Chapter_EN.fm AVIC-W8500NEX/AVIC-W6500NEX 19_Navi_UC_QRD3724(A5_Horizon) En Middle range output (NW ) Yellow/black (MUTE) If you use an equipment with Mute function, wire this lead to the Audio Mute lead on that equipment. If not, k...
7 X:\print\Pioneer\19AJ\NAVI\19_Navi_UC_QRD3724(A5_Horizon)_INST\020Chapter_EN.fm AVIC-W8500NEX/AVIC-W6500NEX 19_Navi_UC_QRD3724(A5_Horizon) En Eng lish When you use the rear view camera, the rear view image is automatically switched from the video by moving the shift lever to REVERSE (R) . Camera V...
8 X:\print\Pioneer\19AJ\NAVI\19_Navi_UC_QRD3724(A5_Horizon)_INST\020Chapter_EN.fm AVIC-W8500NEX/AVIC-W6500NEX 19_Navi_UC_QRD3724(A5_Horizon) En External video component (sold separately) NOTE The appropriate setting is required to use the external video component. For details, refer to the Operation...
9 X:\print\Pioneer\19AJ\NAVI\19_Navi_UC_QRD3724(A5_Horizon)_INST\020Chapter_EN.fm AVIC-W8500NEX/AVIC-W6500NEX 19_Navi_UC_QRD3724(A5_Horizon) En Eng lish CAUTION • Never install this product in places where, or in a manner that:– Could injure the driver or passengers if the vehicle stops suddenly. – ...
10 X:\print\Pioneer\19AJ\NAVI\19_Navi_UC_QRD3724(A5_Horizon)_INST\020Chapter_EN.fm AVIC-W8500NEX/AVIC-W6500NEX 19_Navi_UC_QRD3724(A5_Horizon) En Do not cover this area. • The semiconductor laser will be damaged if it overheats, so don’t install this product anywhere hot- for instance, near a heater ...
11 X:\print\Pioneer\19AJ\NAVI\19_Navi_UC_QRD3724(A5_Horizon)_INST\020Chapter_EN.fm AVIC-W8500NEX/AVIC-W6500NEX 19_Navi_UC_QRD3724(A5_Horizon) En Eng lish WARNING Do not install the GPS antenna over any sensors or vents on the dashboard of the vehicle, as doing so may interfere with the proper functi...
12 X:\print\Pioneer\19AJ\NAVI\19_Navi_UC_QRD3724(A5_Horizon)_INST\020Chapter_EN.fm AVIC-W8500NEX/AVIC-W6500NEX 19_Navi_UC_QRD3724(A5_Horizon) En Double-sided tape Clamps Use separately sold clamps to secure the lead where necessary inside the vehicle. NOTE Install the microphone on the steering colu...
PIONEER ELECTRONICS (USA) INC. LIMITED WARRANTY WARRANTY VALID ONLY IN COUNTRY OF PRODUCT PURCHASE WARRANTY Pioneer Electronics (USA) Inc. (Pioneer) warrants that Pioneer® Car/Marine Electronics, Speaker, and Accessory Products distributed by Pioneer in the U.S.A. and Canada that fail to function pr...
PIONEER ELECTRONICS (USA) INC. GARANTIE LIMITÉE GARANTIE VALIDE UNIQUEMENT DANS LE PAYS D’ACHAT DU PRODUIT GARANTIE Pioneer Electronics (USA) Inc. (ci-après « Pioneer ») garantit que les appareils électroniques, haut-parleurs et accessoires automobiles/marins Pioneer® distribués par Pioneer aux État...
Manual Pioneer AVIC W8500NEX
Pioneer Manuals
-
Pioneer AHU
User Manual
-
Pioneer DMH WT6000NEX
User Manual
-
Pioneer DMH 2000NEX
User Manual
-
Pioneer DMH W3000NEX
User Manual
-
Pioneer DMH W3050NEX
User Manual
-
Pioneer HEAT PUMP
User Manual
-
Pioneer MINI-SPLITS OUTDOOR
User Manual
-
Pioneer SL405
User Manual
-
Pioneer AST-12UW3SXE**02
User Manual
-
Pioneer AST-09UW3SXE**01
User Manual
-
Pioneer ND BC010
User Manual
-
Pioneer TS A4671F
User Manual
-
Pioneer TS A653CH
User Manual
-
Pioneer TS A653FH
User Manual
-
Pioneer TS A683FH
User Manual
-
Pioneer TS A693CH
User Manual
-
Pioneer TS A693FH
User Manual
-
Pioneer VSX LX805
User Manual
-
Pioneer PN43 751 24U
User Manual
-
Pioneer PN50 751 24U
User Manual