Pioneer AL600 - Manuals - manualsarea.com

Page 2 - Unpacking the Lift

Unpacking the Lift Detailed below is the inventory of parts included with your lift. If any parts are missing or if any shipping damage is noted, immediately contact the distributor from which you purchased your lift. DO NOT attempt to install or use the lift with any missing or damaged parts. Pione...

Page 3 - Installing the Vehicle Wiring Harness

Important Note: IMPROPER WIRING IS THE #1 CAUSE OF PROBLEMS IN THE OPERATION OF A VEHICLE LIFT. FOLLOW THE WIRING INSTRUCTIONS CAREFULLY Located in the hardware package is the vehicle wiring harness. The harness is manufactured to, and complies with the SAE J1128 requirements. The wire harness is ap...

Page 4 - Installing the Leg Assembly:; Placing the lift into the vehicle:; Installing in Vehicles with a Removable Third Row Seat; Preparing the vehicle’s cargo area:

Leg Assembly Foot Plate This part of the J-Bolt must face toward the front of the vehicle This part of the leg assembly must face toward the rear of the vehicle. J-Bolt Bracket: These parts must face toward the rear of the vehicle. Secure the J-Bolts into the 3rd row seat attachment points. Leg Asse...

Page 5 - Installing in Vehicles Without a Removable Third Row Seat; Attaching the lift into the vehicle:

This part of the leg assembly must face toward the rear of the vehicle. Leg Assembly 5/16 x 4” Bolt 5/16” Washer Installation Washer 5/16” Lock Washer 5/16” Nut Installing in Vehicles Without a Removable Third Row Seat Installing the Leg Assembly: Place the leg assembly into the vehicle. Orientate t...

Page 6 - Installing the Pioneer; Push the down button; Watch the lift as it extends.; Connecting the Electrical Components:

Installing the Pioneer Extending the Lift: Push the down button on the hand control to extend the lift in the horizontal direction. CAUTION: Watch the lift as it extends. Make sure the moving components of the lift do not rub against the vehicle’s interior, door lip, or door latch. You may need to s...

Page 7 - Preparing the Power Chair or Scooter for the Pioneer

There are 2 options on how to attach the strap hooks to the chair that are included with the lift. Anchor Plate: The Anchor Plate is a flat plate that is 20” long with 2 slots in each end. This plate will work with any chair or scooter that has a center seat post that attaches to the bottom of the s...

Page 8 - Loading a Power Chair; Parking the Chair on the Platform:; Before; Securing the Chair to the Platform:; The; Folding Seat Backs:; If your chair has a

Loading a Power Chair Parking the Chair on the Platform: Before loading the power chair, verify that the platform has been lowered all the way to the ground. Set your chair’s speed control at a slow speed so that you may maneuver comfortably onto the platform. You may drive onto the platform from ei...

Page 9 - Platform Preparation for Use with Scooters

Modifying the Platform for use with Scooters: Contained in the lift box will be the front wheelscooter adapter. This must be attached to the platform for all scooter applications.Attach the front wheel scooter adapter usingthe provided hardware to the platform end plateson the passenger's side of th...

Page 10 - Parking the Scooter on the Platform:; If your scooter has a; Stowing the Scooter:; While holding the hand; Loading a Scooter; Securing the Scooter to the Platform:

Parking the Scooter on the Platform: Before loading the scooter, verify that the platform has been lowered all the way to the ground. Set your scooter’s speed control at a slow speed so that you may maneuver comfortably onto the platform. You must driv e onto the platform from the driver’s side of t...