Pioneer A9 - Manuals

Pioneer A9 – Manual in PDF format online.

Manuals:

Manual

Manual Pioneer A9

Summary

Page 2 - CAUTION; Location: rear of the unit

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The lightning flash with arrowhead, within an equilateral triangle, is intended to alert th...

Page 4 - We Want You Listening For A Lifetime

S001_En Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics G...

Page 5 - Thank you for buying this Pioneer product.; Contents

Thank you for buying this Pioneer product. Please read through these operating instructions so that you will know how to operate your model properly. After you have finished reading the instructions, put them in a safe place for future reference . Contents 01 Before you start Features . . . . . . . ...

Page 6 - Before you start; Features

Before you start 01 6 En Chapter 1: Before you start Features • Quick response power supply circuit The superior power supply circuit adopted by this unit achieves vastly improved response by employing ‘no feedback’ circuitry, toriodal transformers and low impedence parallel main capacitors characte...

Page 7 - Inserting the battery; Push the release tab to the right to; Installing the receiver

Before you start 01 7 En Inserting the battery Insert the lithium battery (CR2025) into the remote control as shown below. The battery supplied with this unit is stored in the battery casing (see step 3 below). When you notice a decrease in the operating range, replace the battery in the same manner...

Page 8 - Connecting up; Making cable connections; Important; • Before making or changing any; Connecting audio components; Connect the analog audio outputs of your; Use a stereo RCA phono cable as shown.

Connecting up 02 8 En Chapter 2: Connecting up Making cable connections Make sure not to bend the cables over the top of this unit (as shown in the illustration). If this happens, the magnetic field produced by the transformers in this unit may cause a humming noise from the speakers. Important • Be...

Page 9 - Using external antennas

Connecting up 02 9 En • Connect any other components (such as an iPod 1 dock or a portable audio player) to the AUX inputs in the same way. 2 Connect the analog outputs of your tape deck (or other recorder) to the TAPE inputs (IN) on this receiver. Then connect the audio inputs on the tape deck to t...

Page 10 - To improve FM reception; coaxial cable to connect an external; To improve AM reception; Connecting the speakers; Bare wire connections

Connecting up 02 10 En 4 Place the AM antenna on a flat surface and in a direction giving the best reception. 5 Connect the FM wire antenna in the same way as the AM loop antenna. For best results, extend the FM antenna fully and fix to a wall or door frame. Don’t drape loosely or leave coiled up. U...

Page 11 - • Please refer to the manual that came with; Caution; • These speaker terminals carry; HAZARDOUS live voltage; • Make sure no exposed speaker wire is; Plugging in; Connect the AC power cord to the AC IN

Connecting up 02 11 En To connect a terminal, unscrew the terminal a few turns until there is enough space to insert the exposed wire ( fig. B ). Once the wire is in position, tighten the terminal until the wire is firmly clamped ( fig. C ). Important • Please refer to the manual that came with your...

Page 12 - Controls and displays; Front panel; Selects an input source.

Controls and displays 03 12 En Chapter 3: Controls and displays Front panel 1 POWER  OFF  ON 2 STANDBY indicator 3 Character display (page 14) 4 DIRECT Press to switch the Direct listening feature on or off (page 15). 5 INPUT SELECTOR dial Selects an input source. 6 MASTER VOLUME 7 Remote sensor 8...

Page 13 - Using the remote control

Controls and displays 03 13 En Remote control 1  Switches the receiver between standby and on. 2 Input selector buttons Press to select an input source. 3 S. RETRIEVER Press to switch the Sound Retriever on/off (page 15). 4 TONE/BAL controls Use to adjust the tone and balance (page 15). 5 Number bu...

Page 15 - Listening to your system; Using Direct listening

Listening to your system 04 15 En Chapter 4: Listening to your system Using Direct listening Use the Direct listening feature when you want to hear the truest possible reproduction of a source. All unnecessary signal processing 1 is bypassed, and you’re left with the pure sound source. • While liste...

Page 16 - Use the input select buttons (

Listening to your system 04 16 En Making an audio recording You can make an audio recording from any audio source connected to the receiver. 1 Select the source you want to record. Use the input select buttons ( INPUT SELECTOR ). 2 Prepare the source you want to record. Tune to the radio station, lo...

Page 17 - Using the tuner; Listening to the radio; Naming station presets; Listening to station presets; Listening to station presets; Saving station presets

Using the tuner 05 17 En Chapter 5: Using the tuner Listening to the radio The following steps show you how to tune in to FM and AM radio broadcasts. 1 Press TUNER then press BAND to select the tuner band. 2 Tune to a station. There are four ways to do this: Automatic tuning – Press and hold TUNE +/...

Page 18 - Press CLASS to select the class in which

Using the tuner 05 18 En 2 Press CLASS to select the class in which the station is stored. Press repeatedly to cycle through classes A, B and C. 3 Press ST +/– to select the station preset you want. A9_KU.book 18 ページ２００６年１１月６日　月曜日　午後３時３４分

Page 19 - Other connections; Using XM Radio; Rock; Connecting your XM Radio receiver; Use the XM input selector button to; • If after pressing; XM; the display shows; , try disconnecting the antenna; Listening to XM Radio

Other connections 06 19 En Chapter 6: Other connections Using XM Radio XM is the leading provider of satellite radio in the United States. Through two high-power satellites, Rock and Roll , XM Radio service offers over 150 channels of music, news, talk, sports and children's programming on a monthly...

Page 20 - Saving channel presets; Selecting channels and browsing by genre; Listening to channel presets; and The Ultimate

Other connections 06 20 En • Use the / buttons to select a channel then press ENTER to listen to the XM radio broadcast. • To browse by genre, first press CATEGORY , use / to select a genre then press ENTER . 1 • To cancel and exit any time, press RETURN . Tip • You can select channels directly ...

Page 22 - • Make sure you don’t switch off the; • Before making or changing the

Other connections 06 22 En Caution • Make sure you don’t switch off the computer or unplug the USB cable during playback. • To prevent noise being output, don’t use other software on your computer during playback. • Pioneer is not responsible for computer system damage, software crashes or failures,...

Page 23 - Operating other Pioneer

Other connections 06 23 En Connecting an IR receiver If you keep your stereo components in a closed cabinet or shelving unit, you can use an optional IR receiver (such as a Niles or Xantech unit) to control your system instead of the remote sensor on the front panel of this receiver. 1 1 Connect the...

Page 24 - Connect the 12V TRIGGER jack of this

Other connections 06 24 En Switching components on and off using the 12 volt trigger You can connect components in your system to this receiver through a 12 volt trigger. If you turn the power to a connected component on, the power to this receiver is also turned on. This receiver will not turn on i...

Page 25 - Additional information; Troubleshooting; Problem; MUTE

Additional information 07 25 En Chapter 7: Additional information Troubleshooting Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investig...

Page 26 - XM radio messages; Specifications; Amplifier section; Continuous power output (both channels

Additional information 07 26 En XM radio messages Specifications Amplifier section Power output specification is for when power supply is 120 V. • Continuous power output (both channels driven at 20 Hz to 20 kHz)** THD 0.2 %, 4 Ω . . . . . . . . . . . . . . . . . 70 W + 70 W THD 0.2 %, 8 Ω . . . . ....

Page 27 - Audio section; Frequency response; AM Tuner Section; Miscellaneous; • Specifications and the design are subject; Cleaning the unit; • Use a polishing cloth or dry cloth to wipe

Additional information 07 27 En Audio section • Input (Sensitivity/Impedance) CD, TAPE, AUX . . . . . . . . . . . . . . . . 200 mV/47 k Ω PHONO (MM). . . . . . . . . . . . . . . . . . 2.8 mV/47 k Ω PHONO (MC) . . . . . . . . . . . . . . . . . . 0.3 mV/100 Ω • Frequency response CD, TAPE, AUX, USB . ...

Page 28 - PIONEER CORPORATION; PIONEER EUROPE NV

PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: 1-877-283-5901 PIONEER...