Philips 50PUS6809 - Manuals

2.5 Antenna cable Insert the antenna plug firmly into the ANTENNA socket at the back of the TV. You can connect your own antenna or an antenna signal froman antenna distribution system. Use an IEC Coax 75 Ohm RFantenna connector. Use this antenna connection for DVB-T and DVB-C inputsignals. 2.6 Sate...

3 Network 3.1 Wireless network What you need To connect the TV wirelessly to the Internet, you need awireless router. Use a high-speed (broadband) connection tothe Internet.. Network devices The TV can connect to other devices in your wireless network,like your computer or smartphone. You can use a ...

Network problems Wireless network not found or distorted • Microwave ovens, DECT phones or other Wi-Fi 802.11b/g/ndevices in your proximity might disturb the wireless network.• Make sure that the firewalls in your network allow access tothe TV's wireless connection.• If the wireless network does not...

4 Connections 4.1 Tips on connections Connectivity guide Always connect a device to the TV with the highest qualityconnection available. Also, use good quality cables to ensure agood transfer of picture and sound. If you need help to connect several devices to the TV, you canvisit the Philips TV con...

Y Pb Pr - Audio L R Y Pb Pr - Component Video is a high quality connection. TheYPbPr connection can be used for High Definition (HD) TVsignals. Next to the Y, Pb and Pr signals add the Audio Left andRight signals for sound. • Y shares the same jack with CVBS.• Component and Composite share audio jac...

EasyLink setup The TV comes with EasyLink switched on. Make sure that allHDMI CEC settings are properly set up on the connectedEasyLink devices. EasyLink might not work with devices fromother brands. HDMI CEC on other brands The HDMI CEC functionality has different names on differentbrands. Some exa...

 Keywords and look up Common Interface CAM . CAM Insert a CAM module Switch off the TV before inserting a CAM.Look on the CAM for the correct method of insertion. Incorrectinsertion can damage the CAM and TV. Use the Common Interface slot on the TV to insert the CAMcard.With the front of the card f...

Switch off timer Switch off this automatic timer, if you only use the remotecontrol of the Set-top box. Do this to prevent the TV fromswitching off automatically after a 4 hour period without a keypress on the remote control of the TV. To switch off the Switch off timer, press  and select Setup and...

To synchronise the sound on the TV . . . 1 - Press  and select Setup and press OK . 2 - Select TV settings > Sound > Advanced > Audio out offset . 3 - Use the slider bar to set the sound offset and press OK . 4 - Press  , repeatedly if necessary, to close the menu. Audio Out format If you...

4.9 Game console HDMI For best quality, connect the game console with an High speedHDMI cable to the TV Y Pb Pr - Audio L R Connect the game console with a component video cable (Y PbPr) and an audio L/R cable to the TV. • Y shares the same jack with CVBS.• Component and Composite share audio jacks....

TV guide Before you decide to buy a USB Hard Drive to record, you cancheck if it is possible to record digital TV channels in yourcountry.Press  TV GUIDE on the remote control. If there is a Record button on the TV guide page, you can record. For more information on how to install a USB Hard Drive,...

CVBS - Audio L R / Scart You can use an HDMI, YPbPr or SCART connection to connectyour camcorder. If your camcorder only has Video (CVBS) andAudio L/R output, use a Video Audio L/R to SCART adapter toconnect to the SCART connection. Note: the CVBS to Scart Adaptor is not provided in the TV set. CVBS...

a movie) and press OK . 4 - Press  , repeatedly if necessary, to close the menu. Remember to set the Game or computer setting backto Computer when you stop playing the game. 4.16 Headphones You can connect a set of headphones to the  connection on the TV. The connection is a mini-jack 3.5mm. You c...

5 Switch on 5.1 On or Standby Make sure you plugged in the mains power on the back of theTV before you switch on the TV.If the red indicator light is off, press the Joystick on the right sideor on the back of the TV to put the TV in standby - the redindicator will light up. With the TV in standby, p...

6 Remote control 6.1 Key overview Top 1 -  Standby / On To switch the TV On or back to Standby. 2 - Playback and record keys • Play  , to playback. • Pause  , to pause playback • Stop  , to stop playback • Rewind  , to rewind • Fast forward  , to go fast forward • Record  , to record now 3 - ...

7 TV channels 7.1 Watching TV channels Switch channels To watch TV channels, press  . The TV tunes to the TV channel you last watched. Alternatively, press  to open the Home menu and select Watch TV and press OK . To switch channels, press  + or  - . If you know the channel number, type in the n...

 key or OK key to open their interactive programme. Navigate iTV pages You can use the arrow and colour keys, the number keys andthe  key to navigate the iTV pages. You can use the  (Play),  (Pause) and  (Stop) keys to watch videos within iTV pages. Digital Text (UK only) To open Digital Text, ...

8 Satellite channels 8.1 Watching satellite channels To watch satellite channels . . .Press  and select Satellite and press OK . The TV tunes to the satellite channel you last watched. Change channel To change channels, press  + or   . The TV will tune to the next channel in the selected channel...

Favourite channels You can mark channels as favourite channels. Your favouritesatellite channels are collected in the Favourites list of the satellite channel list. Watching favourite channels Set up a favourite channel list to easily switch between thechannels you want to watch.To only switch betwe...

Child lock code You can set or change the Child lock code. To set the lock code or to change the current code . . . 1 - Press  and select Setup and press OK . 2 - Select Satellite settings > Child lock > Change code and press OK . 3 - If a code is set already, enter the current Child lock cod...

To install a transponder . . . 1 - Press  and select Setup and press OK . 2 - Select Satellite settings > Channel installation > Manual installation and press OK . 3 - If you have more than 1 satellite installed, select the satellite/LNB for which you want to add channels. 4 - Set the Polariz...

9 Home menu From the Home menu, you can start any activity you can dowith the TV. Open the Home menu to start watching TV or start watching adisc on your Home Theatre System. Also in the Home menu,you can open Smart TV to surf the Internet, start Skype or openHelp if you need information on using th...

10 TV guide 10.1 What you need With the TV guide you can view a list of the current andscheduled TV programmes of your channels. Depending onwhere the TV guide information (data) is coming from, analogueand digital channels or only digital channels are shown. Not allchannels offer TV guide informati...

11 Sources 11.1 Sources list In the list of connections - the Source menu - you can find thedevices connected to the TV. From this Source menu, you canswitch to a device. Sources menu To open the Sources menu, press  SOURCES . To switch to a connected device, select the device with thearrows  (lef...

12 Timers and clock 12.1 Sleeptimer With the sleep timer, you can set the TV to switch to standbyautomatically after a preset time. To set the sleep timer . . . 1 - Press  and select Setup and press OK . 2 - Select TV settings > General settings > Sleep timer . With the slider bar you can set...

13 3D 13.1 What you need For Active 3D sets This is an Active 3D TV. On this TV, you can watch 3Dprogrammes and movies in full High Definition resolution withActive 3D. To watch 3D you need to : • Tune to a TV channel that broadcasts programmes in 3D.• Rent a movie in 3D from an online video store w...

14 Games 14.1 Play a game With a game console connected to the TV, you can play gameson TV. For more information on connecting a game console, press  Keywords and look up Game console, connect . Start a game 1 - Press  SOURCES , select the game console and press OK . 2 - On the game console, start...

16 Pause TV You can pause a TV broadcast and resume watching it later.Only digital TV channels can be paused. You must connect aUSB Hard Drive to buffer the broadcast. You can pause abroadcast for a maximum time span of 90 minutes.For more information, press  Keywords and look up USB Hard Drive . P...

17 Recording 17.1 What you need To record a TV programme you need . . . • a connected USB Hard Drive formatted on this TV• digital TV channels installed on this TV (the channels youwatch with Watch TV)• to receive channel information for the built-in TV guide (fromthe broadcaster or from the Interne...

17.3 Watch a recording To watch a recording . . . 1 - Press  , select  Recordings and press OK . 2 - In the list, select the recording and press  (Play) to start the playback. You can use the  (Forward),  (Rewind),  (Pause) or  (Stop) keys on the remote control. Expired recording Broadcasters...

18 Skype 18.1 About Skype With Skype™ you can make video calls on your TV for free. You can call and see your friends from anywhere in the world.Talk to your friends while watching them on the big screen ofyour TV. 18.2 What you need To make a video call on Skype, you need the separately sold Philip...

password cannot contain a space. If you don't have a Skype Name and Password yet, you cancreate a new account on the sign in page on TV. 1 - On the sign-in page, select New account and press OK.2 - Create your new account.• Full nameEnter your full name.• Skype nameEnter a name as your Skype name. Y...

View or change your email address, check the amount of credityou have or view the subscription information, or write amessage that reflects your mood. • Profile picture If you did not upload a profile picture with your computer yet,you can select one of the available avatars as Profile picturehere. ...

Remove or rename You can Remove or Rename contacts. To remove a contact… 1 - On the Contacts page, select the contact you want to remove. 2 - Press  OPTIONS and select Remove and press OK . The contact is removed from the list. To rename a contact… 1 - On the Contacts page, select the contact you w...

Outgoing calls and press OK . To view new contact requests, select Contact requests and press OK . To view and listen to your voicemails, select Voicemails and press OK . For how long your Skype events are kept in this history listdepends on the amount of contacts you have and howintensively you use...

19 Smart TV 19.1 About Smart TV Connect this Philips Smart LED TV to the Internet and discover a new world of television. You can make a wired connection toyour router or you can link up wirelessly with Wi-Fi. With the TV connected to your home network, a smartphonecan show a photo on TV, you can pl...

Streaming video With this TV, you can watch rental movies sent as a streamingvideo format. You can almost instantly watch the movie. Youmight need a USB Hard Drive to store some video buffer. If youhave a USB Hard Drive connected, you can also downloadrental movies from video stores that offer movie...

20 Multi room 20.1 About Multi room With Multi Room you can watch a TV programme that comesfrom another TV in your home. The programme is streamedfrom one TV to the other. You can stream a programme to aTV that has no antenna connection or has no Smart cardsubscription of its own. You can also strea...

21 Settings 21.1 Setup menu Quick picture and sound settings With Quick picture and sound settings you can set your basic picture preferences in a few easy steps. The settings you madeare stored under the Picture style - Personal . You can return to your picture preference if some settings were chan...

Update software Press  Keywords and look up Software, Internet update or Software, USB update . Update software Press  Keywords and look up Software, USB update . Software settings Press  Keywords and look up Software, current version . Watch demo With Demo in  menu, you can watch some demonstra...

audio device, send the TV sound to the device and switch offthe TV speakers.With EasyLink or EasyLink autostart selected, you can still switchto TV speakers if necessary. To set the TV speakers . . . 1 - Press  and select Setup and press OK . 2 - Select TV settings > Sound > Sound output . 3 ...

22 Specifications 22.1 Environmental Saving energy The Eco settings bundle the settings that help the environment. While you are watching TV channels, press  icon, then select Eco settings , press OK . Active settings are marked with a  . You can mark or unmark each setting with the OK key. Press ...

23 Software 23.1 Software update Update from USB It might be necessary to update the TV software. You need acomputer with an high-speed Internet connection and a USBmemory device to upload the software on the TV. Use a USBmemory device with 256MB free space. Make sure that writeprotection is switche...

24 Troubleshooting andsupport 24.1 Troubleshooting Channels No digital channels found during the installation See the technical specifications to make sure that your TVsupports DVB-T or DVB-C in your country.Make sure that all cables are properly connected and that thecorrect network is selected. Pr...

Picture signals from some devices may not fit the screencorrectly. Check the signal output of the connected device. Computer picture is not stable Make sure that your PC uses the supported resolution andrefresh rate. Sound No sound or poor sound quality If no audio signal is detected, the TV automat...

24.4 Online help To solve any Philips TV related problem, you can consult ouronline support. You can select your language and enter yourproduct model number. Go to www.philips.com/support . On the support site you can find your country's telephonenumber to contact us as well as answers to frequently...

25 Safety and care 25.1 Safety Important Read and understand all safety instructions before you use theTV. If damage is caused by failure to follow instructions, thewarranty does not apply. Secure the TV from falling over Always use the supplied wall bracket to secure the TV fromfalling over. Mount ...

Lightning storms Disconnect the TV from the power outlet and antenna beforelightning storms.During lightning storms, never touch any part of the TV, powercord or antenna cable. Risk of hearing damage Avoid using earphones or headphones at high volumes or forprolonged periods of time. Low temperature...

Index 3 3D backlight contrast 68 3D, 2D to 3D conversion 47 3D, health warning 47 3D, optimal viewing 47 A Active control 68 Activity style 70 Amplifier, audio system 72 Antenna connection 8 Antenna connection, tips 12 App, gallery 64 App, rental videos 64 Apps, feedback 64 Apps, lock 66 Apps, open ...

Contact information Argentina 0800 444 7749Buenos Aires 0810 444 7782 België / Belgique 070 700 035 (0,15€/min.) Bosna i Hercegovina 033 941 251 (Lokalni poziv) Brazil 0800 701 0245Sao Paulo 2938 0245 Бълария 02 4916 273 (Национален номер) Česká republika 228880895 (Místní tarif) Danmark 3525 8314 D...