Pelco MR5000 - Manuals - manualsarea.com

Page 3 - TABLE OF CONTENTS

Pelco Manual C2436M-B (9/02) [ 3 ] TABLE OF CONTENTS IMPORTANT SAFEGUARDS AND WARNINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Page 5 - I M P O R T A N T; Attach Adapter Plate to Base of ICS-DO101ABK

Pelco Manual C2436M-B (9/02) [ 5 ] IMPORTANT SAFEGUARDS AND WARNINGS DESCRIPTION Designed specifically for the MR5000 Series Public View System, the ICS-DO101ABK Integrated CameraSystem packages a camera and lens into a small, discreet, high-security dome. Pelco’s MR5000 Public Viewing Station is sp...

Page 6 - Connect Video and Power; 2 VDC Operation Only –; Prepare Video and Electrical Cabling

[ 6 ] Pelco Manual C2436M-B (9/02) 3 Connect Video and Power 1. Connect the video cable. Place the cable inside the MR5000 Series mount arm and install the bottom end cap of the mount to conceal the cable. 2. Depending on the input voltage, connect either the 12 VDC or 24 VAC input power wires to th...

Page 7 - Install Camera; Turn on power to the camera and monitor.; C A U T I O N

Pelco Manual C2436M-B (9/02) [ 7 ] 4 Install Camera 1. Some indoor installations do not require aheater. If the installation does not require aheater, remove the heater board from the cam-era assembly. To remove the heater applypressure and press on the corner of theboard. 2. If the heater is instal...

Page 8 - Auto Iris Level Adjustment

[ 8 ] Pelco Manual C2436M-B (9/02) ADJUSTMENTS (COLOR CAMERA ONLY) If you have a color camera, it is set up at the factory and normally requires no adjustments. Sometimes,however, adjustments may be necessary. 1. Remove the dome and trim ring using the supplied 1/8-inch hollow screwdriver bit.2. Adj...

Page 10 - Switch Settings for Varifocal Lens; To enable automatic exposure; CAUTION

[ 10 ] Pelco Manual C2436M-B (9/02) Switch Settings for Varifocal Lens The high resolution camera withvarifocal lens and auto iris isconfigured at the factory foroptimal performance in lightingconditions where auto iris isrequired. It is also configured withthe shutter speed set at 1/60(NTSC) or 1/5...

Page 11 - SPECIFICATIONS; Electrical; Regulator y Notices

Pelco Manual C2436M-B (9/02) [ 11 ] SPECIFICATIONS Electrical Input Voltage: 12 VDC or 24 VAC, ± 10% PowerConsumption: 13 watts or less VideoConnector: BNC OperatingTemperature: -50 ° to 122 ° F (-46 ° to 50 ° C) De-ices to -10 ° F (-23 ° C) General Cable Entry: 3/4-inch (1.91 cm) conduit fittingand...

Page 12 - PRODUCT WARRANTY AND RETURN INFORMATION

[ 12 ] Pelco Manual C2436M-B (9/02) REVISION HISTORY Manual # Date Comments C2436M 9/01 Original version. C2436M-A 7/02 Added instructions for fixed lens with auto iris. C2436M-B 9/02 Revised installation instructions – bracket and camera assembled at factory. Added iris leveladjustment for fixed le...