Pelco EH2500 - Manuals - manualsarea.com

Page 5 - Important Safety Instructions; RISK OF ELECTRIC SHOCK.

C1473M-C (4/05) 5 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Only use attachments/accessories specified by the manufacturer. 6. Use only with the cart, stand, tripod, bracket, or table specified by the ma...

Page 6 - Description; MODELS

6 C1473M-C (4/05) Description The EH2500 Series enclosures are sealed, dust-tight, and waterproof camera enclosures designed to protect a CCTV camera and lens from adverse environmental conditions. The EH2500 Series feature a sled for camera mounting and a “T” handle on the rear plate to assist in r...

Page 7 - Installation; Qty Description; ENCLOSURE MOUNTING

C1473M-C (4/05) 7 Installation The following items are supplied: Qty Description 1 EH2500 Series enclosure 1 Hex wrench, 3/32" (Pelco # ZT-ALLEN3/32) 1 Hex wrench, 5/64" (Pelco # ZT-ALLEN5/64) 1 1/4” x 1” O.D. fender washer 1 Desiccant bag 2 1/4-20 x .375-inch Phillips pan head screws and fl...

Page 8 - CAMERA AND LENS INSTALLATION; POWER AND CAMERA CONNECTIONS

8 C1473M-C (4/05) CAMERA AND LENS INSTALLATION To install the camera and lens, perform the following steps: 1. Use the supplied 5/64-inch hex wrench and loosen the screws located on the back of the enclosure. 2. Pull on the "T" handle and slide the camera sled out of the enclosure. 3. Mount ...

Page 10 - REASSEMBLE THE ENCLOSURE; MAINTENANCE

10 C1473M-C (4/05) Figure 6. Enclosure Input Voltage 120/230 VAC REASSEMBLE THE ENCLOSURE 1. Place the desiccant bag in the enclosure. 2. Slide the camera sled back into the enclosure. 3. Reinstall the screws in the rear plate. MAINTENANCE Regularly scheduled maintenance is not required. Clean the o...

Page 11 - Maximum Distance; Maximum distance from transformer to load

C1473M-C (4/05) 11 Table A. Video Coaxial Cable Requirements *Cable requirements: 75 ohms impedanceAll-copper center conductorAll-copper braided shield with 95% braid coverage The following are the recommended maximum distances for 24 VAC applications and are calculated with a 10 percent voltage dro...

Page 12 - Specifications; MECHANICAL

12 C1473M-C (4/05) Specifications MECHANICAL Camera Mounting Multiple mounting holes on removable camera sled Latching Two captivated screws Maximum Camera/Lens Size Accepts camera and lens combinations (including BNC connector) up to the following: EH2508 6.25" L x 2.75" W x 2.75" H (15...

Page 15 - PRODUCT WARRANTY AND RETURN INFORMATION

PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material orworkmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic ...