Pelco ED2920 - Manuals

Pelco ED2920 – Manual in PDF format online.

Manuals:

Manual

Manual Pelco ED2920

Summary

Page 2 - ii; TABLE OF CONTENTS

ii PELCO Manual C460M-E (7/95) TABLE OF CONTENTS Section Page 1.0 WARNINGS ........................................................................................................................................ 1 2.0 SCOPE ...............................................................................

Page 3 - iii; LIST OF ILLUSTRATIONS

PELCO Manual C460M-E (7/95) iii 14.0 ENCLOSURE SPECIFICATIONS .................................................................................................... 28 15.0 PAN/TILT ASSEMBLIES ................................................................................................................

Page 4 - iv; REVISION HISTORY

iv PELCO Manual C460M-E (7/95) REVISION HISTORY Manual # Date Comments C460M 3/89 Original Version. C460M 6/90 Revision A. Manual separated into two parts: enclosuresand pan/tilt. Completely revised to include ED2820RX/PPand ED2820SL-RX/PP models. C460M 11/90 Revision B. Figure 2-4 revised. C460M 6/...

Page 5 - prior to installation and operation.; literature accompanying this unit.; RISK OF ELECTRIC SHOCK.; CAUTION; Only use replacement parts recommended by PELCO.

PELCO Manual C460M-E (7/95) 1 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. This symbol indicates that there are importantoperating and maintenance instructions in the literature accompanying this unit. CAUTION: RISK OF ELECTRIC SHOCK...

Page 6 - Figure 1

2 PELCO Manual C460M-E (7/95) 2.0 SCOPE The information contained within this manual coversthe Harris Environmental Dome. 3.0 DESCRIPTION This product was developed outside of PELCO’s nor-mal product development process, and outside of nor-mal working hours by Jimmy Harris, Sheet Metal De-partment M...

Page 7 - Coax cable and 120 VAC power cord; Figure 2

PELCO Manual C460M-E (7/95) 3 4.0 INSTALLATION 4.1 UNPACKING INSTRUCTIONS The dome and enclosure are shipped in separate cartons.Make sure you have both before installing. Save theshipping cartons and plastic packaging in case any partof the unit has to be returned for credit or repair. 4.2 CONDUCTO...

Page 10 - Figure 6; . Receiver/Preset Pan and Tilt With Alarm Output Wiring Diagram

6 PELCO Manual C460M-E (7/95) 28 POS CONNECTOR POS. COLOR DESC. 1 BROWN P/T COMMON 2 WHT/VIO VIDEO CORE 3 RED LEFT 4 WHT/BLK VIDEO SHIELD 5 YELLOW DOWN 6 ORANGE UP 7 BLUE RIGHT 8 GREEN GROUND 9 WHITE CAMERA AC HIGH 10 BLACK IRIS 11 WHT/BRN FOCUS 12 WHT/RED ZOOM 13 WHT/ORG LENS COMMEN 14 WHT/YEL CAME...

Page 11 - Make certain that the mounting sur-; WARNING; tate by controller only.

PELCO Manual C460M-E (7/95) 7 Figure 7 . Coaxitron/Wiretron Power Patch (CX9024RX/WX8024RX) Wiring Schematic 4.4 INSTALLATION INSTRUCTIONS The Harris Dome is supplied in three (3) configurations:as a passive dome (for use as a dummy dome or with afixed camera ), with a factory installed pan/tilt, or...

Page 14 - . Mounting Templates; ST1 HOLE PATTERN

10 PELCO Manual C460M-E (7/95) Figure 11 . Mounting Templates ED28/ED2820 SERIES ANDEDM210 HOLE PATTERN ST1 HOLE PATTERN

Page 15 - . EDM210 Mounting Extension Installation

PELCO Manual C460M-E (7/95) 11 Figure 12 . EDM210 Mounting Extension Installation 4.4.1.3 EDM210 Mounting Extension When needed, the ED28/ED2820 series dome may bemounted 10 inches (25.4 cm) farther from the mountingsurface with the use of the EDM210 mounting exten-sion. It should be noted that in a...

Page 16 - . ED28/ED2820 Series Parapet or Pole Mounting

12 PELCO Manual C460M-E (7/95) 4.4.1.4 Parapet or Pole Mounting When mounting to a parapet, use of the PP200/PPI200parapet mount or PP300/PP301 parapet corner mountsis recommended. The ED28/ED2820 series dome maybe mounted to other standard PELCO mounts, includ-ing the PP100 Parapet Mount or the PA1...

Page 18 - ED28 EXPLODED ASSEMBLY DIAGRAM; . ED28 Exploded Assembly Diagram

14 PELCO Manual C460M-E (7/95) 6.0 ED28 EXPLODED ASSEMBLY DIAGRAM Figure 14 . ED28 Exploded Assembly Diagram

Page 19 - ED28 MECHANICAL PARTS LIST

PELCO Manual C460M-E (7/95) 15 7.0 ED28 MECHANICAL PARTS LIST The following parts list corresponds to the exploded assembly diagram in Figure 14. Item Qty Description Part Number 1 2 Fastener ED210000 2 2 Receptacle ED210001 3 2 Retainer ED210002 4 1 Holder, Lamp (not shown) ED210020 5 1 Back Box As...

Page 21 - . Connector Assembly; CONNECTOR ASSEMBLY; Contacts cannot be removed from the

PELCO Manual C460M-E (7/95) 17 Figure 15 . Connector Assembly 8.3 CONNECTOR ASSEMBLY Installation and/or testing will require you to assemblethe connector parts provided. Fabricate the intercon-necting cable according to the following steps (refer-ence Figure 15). 1. Slide part A of the cable clamp ...

Page 22 - non-receiver models only

18 PELCO Manual C460M-E (7/95) Note: For non-receiver models only , you must reverse the left/right and up/down function pins shown above if you are not using the C1906 or C1925 pretestedcables. Figure 16 . PT2801000ASSY/PT2801001ASSY Wiring Diagram (Standard or SL Models) QTY SYMBOL DESCRIPTION MAN...

Page 23 - For

PELCO Manual C460M-E (7/95) 19 Note: For non-receiver models only , you must reverse the left/right and up/down function pins shown above if you are not using the C1906/PP or C1925/PPpretested cables. Figure 17 . PT2801002ASSY Wiring Diagram (Standard with Presets)

Page 25 - Do not operate pan/tilt without limit; Do not; remove or reposition the fixed actuator on; OPERATIONAL TEST

PELCO Manual C460M-E (7/95) 21 8.4 LIMIT/STOP ADJUSTMENTS WARNING: Do not operate pan/tilt without limit stops. Do not remove or reposition the fixed actuator on the non-SL. DAMAGE WILL OCCUR. NOTE: SL models are not equipped with pan limit stops. (Disregard steps 1-5 below). To set limit stops, per...

Page 31 - ENCLOSURE MODELS; pan rotation and

PELCO Manual C460M-E (7/95) 27 13.0 ENCLOSURE MODELS ED28 Harris environmental discreet sur-veillance enclosure with black opaquelower dome with clear viewing win-dow for outdoor applications. Fixedcamera mount supplied. (UL, CE) ED28-1 Same as ED28 except supplied withfactory installed heater/blowe...

Page 34 - : When installing a pan/tilt unit to a dome; NOTE

30 PELCO Manual C460M-E (7/95) 17.0 PAN/TILT ASSEMBLY INSTALLATION This section covers the installation of the ED28KIT inretrofitting a non-pan/tilt-equipped ED28 and ED28-1or ED29/ED29-1/ED29-3 Harris Dome with a pan/tiltassembly unit. Please read through and understand theinstallation instructions...

Page 35 - Exploded Assembly Parts List

PELCO Manual C460M-E (7/95) 31 Exploded Assembly Parts List Item Qty Description Part Number 1 1 Bracket PM200C4000COMP 2 1 Dome drive bracket SB34105COMP A 3 Bolt, 1/4-20 x 5/8" hex C/S ZH1/4-20X.625CH B 2 Nut lock, 1/4-20, nylon insert SS ZH1/420NUTCHN C 3 Washer, split lock, 1/4" SS ZH1/4...