Pelco ED2620 - Manuals - manualsarea.com

Page 3 - prior to installation and operation.; literature accompanying this unit.; RISK OF ELECTRIC SHOCK.; CAUTION; This device is designed to operate at

PELCO Manual C437M-B (9/95) 1 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. 4 . Only use replacement parts recommended byPELCO. 5 . After replacement/repair of this unit’s electricalcomponents, conduct a resistance measurementbetween ...

Page 4 - Figure 1

2 PELCO Manual C437M-B (9/95) ED25/26 Series ED27 Series 2.0 SCOPE The information contained in this manual covers theED25/ED2520/ED2620/ED27/ED2720 Series Environ-mental Domes. 2.1 DESCRIPTION The ED25/ED2520/ED2620/ED27/ED2720 Series ofenvironmental domes have been designed primarily foroutdoor ap...

Page 5 - Figure 2; . FMED25 Installation

PELCO Manual C437M-B (9/95) 3 3.0 INSTALLATION CAUTION: Make certain that the mounting surface is capable of supporting the full load ofthe mount, pan/tilt, camera/lens and enclosure • Handle the lower dome with care so as not toscratch or get fingerprints on the viewing window. • When installing th...

Page 6 - . PMED25 Installation

4 PELCO Manual C437M-B (9/95) 3.1.2 PMED25 Pendant MountInstallation To mount the enclosure using the PMED25 pendantmount, perform the following steps. Refer to Figure 3. 1. Screw the PMED25 pendant mount to a suitablelength of 1-1/2-inch MNPT threaded pipe whichhas been securely fastened to a surfa...

Page 7 - Figure 4; . Power Supply Connection

PELCO Manual C437M-B (9/95) 5 3.3.2 Conductor Requirements The ED25/ED2520/ED27 Series environmental domescan be connected by a “hard-wire” system, Coaxitronor Wiretron system. The ED2620 Series dome is de-signed for hard-wire applications only. The distancesfor each of these system is as follows: H...

Page 8 - Figure 5

6 PELCO Manual C437M-B (9/95) Figure 5 . ED2520/ED2720 Series Receiver/Driver Wiring Diagram

Page 11 - Figure 9

PELCO Manual C437M-B (9/95) 9 Figure 10 . Wiring Diagram ED2520SL-PP/ED2720SL-PP Dome Drives Figure 9 . Wiring Diagram for ED2520-PP/ED2720-PP Dome Drives

Page 12 - Terminal Diagram

10 PELCO Manual C437M-B (9/95) 3.3.3 Video Synchronization, Alarm Terminal Diagram The following wiring diagram illustrates the configu-ration of an additional four-position and six-positionalarm terminal strip and additional video synchroniza-tion connection. These terminal strips are factory in-s ...

Page 13 - Note

PELCO Manual C437M-B (9/95) 11 4.0 PAN/TILT LIMIT ADJUSTMENTS CAUTION: DO NOT attempt to adjust limit stops when the pan/tilt is in operation. Damageto the equipment can result. Do not operateequipment without limit stops. To adjust limit stops, perform the following steps: 1. Pan to the right using...

Page 15 - EXPLODED ASSEMBLY DIAGRAM

PELCO Manual C437M-B (9/95) 13 Figure 14 . ED25/ED26/ED27 Series Enclosure Exploded Assembly Diagram 7.0 EXPLODED ASSEMBLY DIAGRAM

Page 16 - MECHANICAL PARTS LIST

14 PELCO Manual C437M-B (9/95) 8.0 MECHANICAL PARTS LIST The following parts list corresponds to the exploded assembly diagram in Figure 14. Item Quantity Description Part Number 1 1 Enclosure front plate assembly ED25001003ASSY 2 1 Lower shock mount ED25004005COMP 3 2 Closing fasteners ED2510000 4,...

Page 19 - CONTROLS; Back Box; WEIGHTS

PELCO Manual C437M-B (9/95) 17 GENERALEnclosure Max. Camera/LensLength: 12.50"L x 4.50"W x 3.25"H(31.75cm x 11.43cm x 8.25cm) Construction: Back Box 0.080" aluminum Viewing Window Optically clear acrylic which hasbeen tinted, rated UL94HB.(Less than 1 f-stop light loss.) Finish: Semi...