Peerless SS550P - Manuals - manualsarea.com

Page 2 - WALL CONSTRUCTION; WARNING

2 of 11 ISSUED: 09-05-06 SHEET #: 202-9166-7 11-10-08 Note: Read entire instruction sheet before you start installation and assembly. Table of Contents Parts List ............................................................................................................................................

Page 3 - Parts List

3 of 11 ISSUED: 09-05-06 SHEET #: 202-9166-7 11-10-08 Some parts may appear slightly different than illustrated. H S T O P N M L K D I A B G Q R J C F E U Parts List SS550P SS550P-S Description Qty. Black Part # Silver Part# A screen mount bracket 1 201-P1156 201-4156 B hook plate 1 201-P1157 201-41...

Page 4 - Phillips Adapter Bracket Fasteners

4 of 11 ISSUED: 09-05-06 SHEET #: 202-9166-7 11-10-08 M6 x 20 mm (4) 520-9402 M6 x 30 mm (4) 510-9109 multi-washer (6) 580-1036 M8 x 16 mm (6) 520-9257 M8 x 40 mm (4) 520-1136 M4 x 12 mm (6) 504-9013 Phillips Adapter Bracket Fasteners M4 x 25 mm (4) 504-1015 M5 x 12 mm (4) 520-1027 M5 x 25 mm (4) 52...

Page 5 - DETAIL 1

5 of 11 ISSUED: 09-05-06 SHEET #: 202-9166-7 11-10-08 Insert three button bumpers ( K ) into bottom of shelf clamp bracket ( D ). Attach shelf clamp bracket ( D ) to shelf support ( C ) using two 1/4-20 x 20 mm screws ( M ) and two 1/4-20 nuts ( N ). For second shelf installation, repeat steps 2thro...

Page 6 - DETAIL 3

6 of 11 ISSUED: 09-05-06 SHEET #: 202-9166-7 11-10-08 Insert two 1/4-20 x 12 mm screws ( L ) into screen mount bracket ( A ), leaving 1/8" of exposed thread as shown in figure 9 and detail 3. Loosely attach six 1/4-20 x 12 mm screws ( L ), washers ( O ), and 1/4-20 nuts ( N ) to screen mount bra...

Page 7 - Attaching Screen Using Universal Plate with Adapter Brackets; For attaching screens with VESA 100 hole pattern, skip to page 10.; ° Backward Tilt

7 of 11 ISSUED: 09-05-06 SHEET #: 202-9166-7 11-10-08 Attach universal plate ( F ) to hook plate ( B ) using four M10 x 15 mm socket screws ( T ). Tighten screws using 6 mm allen wrench ( U ). 10 F B T Attaching Screen Using Universal Plate with Adapter Brackets For attaching screens with VESA 100 h...

Page 8 - Installing Adapter Brackets; flat back screens

8 of 11 ISSUED: 09-05-06 SHEET #: 202-9166-7 11-10-08 Note: "X" dimensions should be equal. • Tighten screws so adapter brackets are firmly attached. Do not tighten with excessive force. Overtightening can cause stress damage to screws, greatly reducing their holding power and possibly causi...

Page 9 - For Flat Back Screen

9 of 11 ISSUED: 09-05-06 SHEET #: 202-9166-7 11-10-08 Refer to Screen Compatibility Chart to determine the proper fastener to use. Visit www.peerlessmounts.com/2 for a full screen compatibility chart for this mount. Begin with the shortest length screw, hand thread through multi-washer and adapter b...

Page 10 - Mounting and Removing Flat Panel Screen; Note; DETAIL 4

10 of 11 ISSUED: 09-05-06 SHEET #: 202-9166-7 11-10-08 Mounting and Removing Flat Panel Screen Hook adapter brackets ( G ) onto universal plate ( F ), then slowly swing screen in as shown. Turn screws clockwise at least six times to prevent screen from being removed as shown in detail 4. Note: Tight...

Page 11 - Attaching Screen with VESA 100 Mounting Pattern

11 of 11 ISSUED: 09-05-06 SHEET #: 202-9166-7 11-10-08 10 Attaching Screen with VESA 100 Mounting Pattern • If screws don't get three complete turns in the screen inserts or if screws bottom out and hook plate is still not tightly secured, damage may occur to screen or product may fail. WARNING Choo...