Peerless HDS200 - Manuals

6 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 2 x HDMI up to 1080p (60Hz)1 x Composite1 x YPbPr Component1 x HDMI up to 1080p (60Hz)1 x Composite1 x YPbPr ComponentH.264 Baseline Profile with Level 4.2HDCP compliant Wireless Connection Supporting IEEE 802.11n: OFDMRJ-45 LAN PortDirect Connection (LAN...

8 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Transmitter Front 1 2 3 4 5 6 7 Transmitter

10 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 2 Transmitter Back 1 3 4 5 6 7 8

12 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 1 2 3 4 5 6 Receiver Front Receiver

13 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Receiver Front 1 . Power/Link • Blinking indicator light - System booting or establishing link between the Transmitter and the Receiver.• Rapid blinking indicator light - Software upgrading or wireless/LAN mode switching.• Solid indicator light - Link be...

14 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 1 2 3 4 5 6 7 8 Receiver Back

16 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 1 4 3 6 7 2 5 8 1 . POWER Button - Turns the Transmitter and Receiver power ON/OFF. • ON: If the Transmitter and Receiver are powered off and the Power/Link Indicator Light is on, press the power button pointed at either unit to turn on both unit's at th...

18 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Installing the Remote Control Battery The battery slip is located on the bottom of the remote control. Step 1 Push the tab, located on the left of the battery slip, to the right and pull out the slip. Battery Slip Battery Slip Tab Step 2 Place the batter...

19 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Before starting the installation, please ensure that all source components (Blu-ray player, cable box, etc.) and the display equipment (TV, display, projector, etc.) are turned off. Step 1 Connecting Source Components To The Transmitter A. HDMI Media Sou...

20 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 A. Connect the provided IR Flasher to the IR-OUT port of the Transmitter. B. Find the location of the IR widow on your component and adhere the IR Flasher Eye directly over the IR window of your component. Note: One IR Flasher eye is to be used for one c...

22 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 While turning on the display device, the HD Flow Pro Wireless Multimedia Kit will be going through the start up process. The process takes about 1.5 to 2 minutes to complete. The Power/Link Indicator Light on the Transmitter and the Receiver should be fl...

23 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Notes: 1. Audio and video sources will switch simultaneously whether using the remote or Power/Source Selection Button. 2. Independent audio switching is only allowed for AV and PC audio. 3. Inputs on the Transmitter and Receiver can be switched by point...

25 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Step 5 Under the heading “Streaming I/F” use the pull down menu to change WiFi to LAN. Step 6 Enter the proper IP address, for the unit being set up, based on the network's domain. Step 7 Once all the settings have been entered click the Submit button at...

26 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Receiver • HDMI, COMPO, AV - The indicator light will be solid for the selected port as long as the output cable is present and connected to the output device. If no output device is detected by the selected output port, the indicator light will be fl as...

27 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Note: Peer-to-Peer units can be con fi gured to multicast mode using the USB Multicast Set-Up Method or LAN Multicast Set-Up Method. Additional Receivers (HDS200-R) are required and sold separately. Please visit http://www.hdfl ow.com/Tech-Support for pr...

28 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Q. What compression standard does the HD Flow use to stream Full HD 1080p content? A. H.264 Baseline Pro fi le Level 4.2 video compression. Q. Does HD Flow Pro Wireless Multimedia Kit deliver 5.1 audio? A. No, the HD Flow Pro Wireless Multimedia Kit only...

29 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Q. Can the HD Flow Pro Wireless Multimedia Kit be set to default to a speci fi c input/output if the unit is turned off or power is lost? A. Yes, the HD Flow Pro Wireless Multimedia Kit can be set to desired input and output ports via a programming page ...

30 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Factory Reset CAUTION Factory reset will revert all settings to factory defaults. It is not recommended to perform factory reset on multicast systems (systems that have two or more Receivers). If there are issues with multicast systems, please reference ...

31 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 How to Check Firmware Version Step 1 Connect the Receiver that needs its fi rmware to be checked to the display device (reference the installation section of this manual). Step 2 Plug in the power AC adapter into a power outlet, and then connect the powe...

32 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 HDMI D Ͳ Sub AV(CVBS) HDMI COMP AV(CVBS) O O X O X X O O X O X X O O X O X X O O X O X X O O X O X X O O X O X X O O X O ^ X O O X O X X O O X O X X O O X O ^ X O O X O X X O O X O X X O O X O X X O O X O ^ X O O X O X X O O X O X X O O X O ^ X O O X O X...

33 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 FCC Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential...

34 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 1 YEAR LIMITED WARRANTY The HDS200 is distributed by Peerless Industries, Inc. using the highest quality components andtechnology available. The Product is warranted to be free from defects in material and workmanship,given normal use and care, for 1 Yea...

35 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Customer Care Need help with installation or set up? Call Peerless-AV Customer Care 1-1-800-865-2112 (available 7:00am- 7:00pm CST, Monday - Friday), or email us at [email protected]. Peerless -AV 2300 White Oak Circle Aurora, IL 60502 USA www.hd fl o...