Omron BP762- Manuals

Page 2 - TABLE OF CONTENTS

2 Before Using the Monitor Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Operating the Device . . . . . . . . . . . . . . ....

Page 3 - Fill in for future reference.; Plus; SAVE THESE INSTRUCTIONS; Before Using the Monitor; • Staple your purchase receipt here

3 Thank you for purchasing the Omron ® 7 series Plus BP762 Automatic Blood Pressure Monitor with ComFit TM Cuff. INTRODUCTION Fill in for future reference. DATE PURCHASED: __________________ SERIAL NUMBER: ____________________ Your new blood pressure monitor uses the oscillometric method ofblood pre...

Page 4 - OPERATING THE DEVICE; The monitor is not intended to be a diagnostic device.; SAFETY INFORMATION

4 To assure the correct use of the product basic safety measures shouldalways be followed including the warnings and cautions listed in thisinstruction manual. WARNING Indicates a potentially hazardous situationwhich, if not avoided, could result in death orserious injury. SAFETY SYMBOLS USED IN THI...

Page 6 - Do not submerge the device or any of the components in water.

RISK OF ELECTRICAL SHOCK Do not plug or unplug the power cord into the electrical outlet withwet hands. Do not overload power outlets. Plug the device into the appropriatevoltage outlet. CARE AND MAINTENANCE Do not subject the monitor to strong shocks, such as dropping theunit on the floor. Do not s...

Page 7 - BEFORE TAKING A MEASUREMENT

7 BEFORE TAKING A MEASUREMENT To ensure a reliable reading follow these recommendations: 1. Avoid eating, drinking alcohol, smoking, exercising, and bathing for 30 minutes prior to taking a measurement. Rest for at least 15minutes prior to taking the measurement. 2. Stress raises blood pressure. Avo...

Page 8 - KNOW YOUR UNIT; Operating Instructions

8 KNOW YOUR UNIT Main Unit: Air Jack Battery Compartment Start/Stop Button USER ID Selection Switch Memory ( ) Button Display AC Adapter Jack Operating Instructions Up/Down ( / ) Buttons SET Button HEM-7220-ZCS_A_M_e_sp_100510.qxd 10/5/10 10:24 AM Page 8

Page 9 - Arm Cuff; Air Tube; AC Adapter; Housing; Quick Start Guide

KNOW YOUR UNIT 9 Components: Arm Cuff Air Tube Air Plug (Connects to Air Jack) AC Adapter Storage Case Housing Cord 7 series Plus Blood Pressure Monitor with ComFit TM Cuff Model BP762 INSTRUCTION MANUAL ESP AÑOL ENGLISH Quick Start Guide Instruction Manual HEM-7220-ZCS_A_M_e_sp_100510.qxd 10/5/10 1...

Page 10 - UNIT DISPLAY

10 UNIT DISPLAY Diastolic Blood Pressure Systolic Blood Pressure Movement Symbol Pulse Display / Memory Number Date/Time Display Low Battery Indicator Deflation Symbol Heartbeat Symbol Average Value Symbol Memory Symbol USER ID Symbol (A/B) Blood Pressure Level Indicator Cuff Wrap Guide Irregular He...

Page 11 - IRREGULAR HEARTBEAT SYMBOL (; display with the measurement values.; DISPLAY SYMBOLS

11 IRREGULAR HEARTBEAT SYMBOL ( ) When the monitor detects an irregular rhythm two or more times duringthe measurement, the Irregular Heartbeat Symbol ( ) will appear on the display with the measurement values. An irregular heartbeat rhythm is defined asa rhythm that varies by less than 25% fromthe ...

Page 12 - Home Guideline for Upper Limit of Normal BP; Systolic Blood Pressure; CAUTION; AVERAGE VALUE SYMBOL (; ) is displayed while taking a

Internationally recognized guidelines for upper limit of normal homeblood pressure readings are as follows: Home Guideline for Upper Limit of Normal BP Systolic Blood Pressure 135 mmHg Diastolic Blood Pressure 85 mmHg This is a general guideline because blood pressure depends onage and morbidity. A ...

Page 13 - • Use only the authorized Omron AC Adapter that came with; USING THE AC ADAPTER; TO REDUCE THE RISK OF

IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS NOTES: • Use only the authorized Omron AC Adapter that came with this monitor. • We recommend you install the batteries even if the AC Adapter is used. If no batteries are installed, you may need toreset the date and time if the AC Adapter is dis...

Page 14 - TO CONNECT THE AC ADAPTER; Insert the AC Adapter Plug into; TO DISCONNECT THE AC ADAPTER; Hold the Housing to remove the AC Adapter from the electrical; WARNING

TO CONNECT THE AC ADAPTER ① Insert the AC Adapter Plug into the AC Adapter Jack on the backside of the monitor as illustrated. ② Plug the AC Adapter into a 120V AC outlet (60 cycles). TO DISCONNECT THE AC ADAPTER ① Hold the Housing to remove the AC Adapter from the electrical outlet. ② Remove the AC...

Page 15 - BATTERY INSTALLATION

1. Remove the battery cover by pulling the hook up while pushing it in the directionof the arrow. 2. Install 4 “AA” size batteries so the + (positive) and - (negative) polarities matchthe polarities of the battery compartmentas indicated. 3. Replace the battery cover. BATTERY INSTALLATION 15 Battery...

Page 16 - • Turn the unit off before replacing the batteries. If the; Low Battery Indicator

BATTERY REPLACEMENT When the Low Battery Indicator appears on the display screen turn themonitor off and remove all the batteries. Replace with four new batteriesat the same time. Longlife alkaline batteries are recommended. CAUTION If battery fluid should get in your eyes, immediately rinse withple...

Page 17 - SETTING THE DATE AND TIME

17 Set the monitor to the current date and time before taking ameasurement for the first time. If the date and time are not set correctly,the measurement values stored in the memory and the average valuesmay not be correct. If the date and time are not set, “-:--” appears during or aftermeasurement....

Page 18 - TO START THE SETTING

1. TO START THE SETTING Press the SET button to adjust the date and time. The year flashes on the display. 2. SETTING THE YEAR The year can be set between 2010 and2040. When the display reaches 2040,it will return to 2010. Press the Up button ( ) to advance by one year. Press the SET button to set t...

Page 19 - Press the Up button (

19 SETTING THE DATE AND TIME 3. SETTING THE MONTH Press the Up button ( ) to advance by one month. Press the SET button to set the currentmonth. The day flashes on the display. 4. SETTING THE DAY Press the Up button ( ) to advance by one day. Press the SET button to set the currentday. The hour flas...

Page 20 - SETTING THE MINUTE; TO TURN THE MONITOR OFF

20 5. SETTING THE HOUR The time is set using AM or PM. Press the Up button ( ) to advance by one hour. Press the SET button to set the currenthour. The minute flashes on the display. 6. SETTING THE MINUTE Press the Up button ( ) to advance by one minute. Press the SET button to set the minute settin...

Page 21 - APPLYING THE CUFF ON THE LEFT ARM; Make sure the air plug is securely inserted in the main unit.; APPLYING THE ARM CUFF

CAUTION Read all of the information in the instruction manual and any otherliterature in the box before operating the unit. CAUTION This device is intended for use in measuring blood pressure andpulse rate in the adult population. Do not use this device on infantsor persons who cannot express their ...

Page 23 - Wrap the cuff firmly in place around your arm using the cloth

23 6. Wrap the cuff firmly in place around your arm using the cloth fastener. APPLYING THE ARM CUFF HEM-7220-ZCS_A_M_e_sp_100510.qxd 10/5/10 10:24 AM Page 23

Page 24 - APPLYING THE CUFF ON THE RIGHT ARM

APPLYING THE CUFF ON THE RIGHT ARM When taking a measurement using the right arm use this instruction for Step 5 on page 22. Apply the cuff to your right upper arm so the thumb grip is centered on the inside of your inner arm. The bottom of the cuff should beapproximately 1/2'' above your elbow. NOT...

Page 25 - CUFF WRAP GUIDE; is displayed while; TAKING A MEASUREMENT

The monitor automatically determines your ideal inflation level. In rarecircumstances when a higher inflation may be necessary, the monitorautomatically re-inflates the cuff up to 30 mmHg higher than the initialinflation and restarts the measurement. WARNING Contact your physician for specific infor...

Page 28 - When the measurement is complete, the arm cuff

TAKING A MEASUREMENT 28 6. When the measurement is complete, the arm cuff completely deflates. Your blood pressure and pulserate are displayed. 7. Press the START/STOP button to turn the monitor off. NOTE: The monitor will automatically turnoff after two minutes. WARNING Contact your physician for s...

Page 29 - SPECIAL CONDITIONS; • Do not apply more pressure than necessary.

SPECIAL CONDITIONS CAUTION Inflating to a higher pressure than necessary may result in bruisingwhere the cuff is applied. If your systolic pressure is known to be more than 220 mmHg, pressand hold the START/STOP button until the monitor inflates 30 to 40mmHg higher than your expected systolic pressu...

Page 30 - AVERAGING FUNCTION; • If two sets of measurement values are stored in the memory; USING THE MEMORY FUNCTION

The monitor is designed to store the blood pressure and the pulse rate in the memory for two people (USER A and USER B) every time ameasurement is completed. The monitor automatically stores up to 60 sets of measurement values(blood pressure and pulse rate) for each user (A and B). When 60 sets ofme...

Page 31 - TO DISPLAY THE MEASUREMENT VALUES; ) appears on the display when the average

TO DISPLAY THE MEASUREMENT VALUES 1. Press the START/STOP button to turn the monitor on. 2. Select your USER ID (A or B). 3. Press the Memory button ( ). The Average Symbol ( ) appears on the display when the average reading is shown. 4. Press the Down button ( ) to display the most recent set of me...

Page 32 - TO DELETE ALL VALUES STORED IN THE MEMORY

32 USING THE MEMORY FUNCTION TO DELETE ALL VALUES STORED IN THE MEMORY The values stored in the memory are deleted by USER ID.You cannot partially delete values stored in the memory. All values willbe deleted. 1. Press the START/STOP button to turn the monitor on. 2. Select your USER ID (A or B). 3....

Page 33 - the arm cuff or; Clean the monitor with a soft dry cloth.; Do not use any abrasive; Store the device and the components in a clean, safe location.; if the unit will not be used for three months or; CARE AND MAINTENANCE; Care and Maintenance

33 To keep your blood pressure monitor in the best condition and protectthe unit from damage, follow the directions listed below: Keep the monitor in the storage case when not in use. Make sure the ACadapter is placed under the main unit sothat it does not damage the display.Avoid kinking or sharply...

Page 35 - ERROR INDICATORS; ERROR INDICATORS AND TROUBLESHOOTING TIPS; SYMBOL

35 ERROR INDICATORS ERROR INDICATORS AND TROUBLESHOOTING TIPS Refer to “Applying the Arm Cuff”. Cuff is not applied correctly. Replace the four batteries. Refer to “Battery Installation”. Batteries are worn Air plug disconnected. Insert the plug securely. Refer to “Applying theArm Cuff”. Arm cuff no...

Page 36 - PROBLEM; No display appears on the unit.; TROUBLESHOOTING TIPS

36 ERROR INDICATORS AND TROUBLESHOOTING TIPS PROBLEM CAUSES AND SOLUTIONS No power. No display appears on the unit. Replace all four batteries with newones.Check the battery installation for proper placement of the battery polarities. Measurement values appeartoo high or too low. Blood pressure vari...

Page 37 - FCC STATEMENT

37 FCC STATEMENT NOTE: POTENTIAL FOR RADIO/TELEVISION INTERFERENCE (for U.S.A. only) This product has been tested and found to comply with the limits for a Class Bdigital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmfulinterfere...

Page 38 - LIMITED WARRANTY; FOR CUSTOMER SERVICE

LIMITED WARRANTY 38 Your Omron ® BP762 Automatic Blood Pressure Monitor, excluding the arm cuff, is warranted to be free from defects in materials and workmanship appearingwithin 5 years from the date of purchase, when used in accordance with theinstructions provided with the monitor. The arm cuff i...

Page 39 - These specifications are subject to change without notice.; SPECIFICATIONS

39 Model: BP762 (HEM-7220-ZCS) Display: LCD Digital Display Measurement Range: Pressure: 0 to 299 mmHg, Pulse: 40 to 180/min. Accuracy/Calibration: Pressure: ±3mmHg or 2% of readingPulse: ±5% of reading Inflation: Automatic by electric pump Deflation: Automatic pressure release valve Rapid Air Relea...