Omron 705CP-II- Manuals

Page 2 - English; Dear Customer; Blood pressure monitor

705CP-II English Dear Customer Contents Blood pressure monitor Important instructions to help you obtain meaningful readings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Your blood pressure monitor: the benefits . . . . . . . . . . . 3 Battery installation / replacement . . . ...

Page 5 - Replace the battery cover.

4 705CP-II English Batteryinstallation /replacement Slide the battery cover off in the direction of thearrow. Install or replace 4 “LR6” batteries so the +(positive) and – (negative) polarities match thepolarities of the battery compartment as indicated. Replace the battery cover. NOTES : If the Low...

Page 6 - ADJUST

5 705CP-II English How to set timeand date Install the batteries and press the ON/OFF button.The display will show 0:00 Press and hold the SET button. The year digits (2002) will flash. Press the ADJUST button to advance the digit(s)one at a time. If you hold down the ADJUST button, the digits willa...

Page 7 - Remove tight-fitting clothing from your upper arm.

6 705CP-II English How to applythe cuff (when wrapping on your left arm) • You can wrap the cuff either on your right or left arm. Insert air tube to air jack (on the left side of thedivice). The cuff must be airless. Remove tight-fitting clothing from your upper arm. Sit in a chair with your feet f...

Page 8 - Relax your arm and turn your palm upward.

7 705CP-II English Pull the cuff so that the top and bottom edges aretightened evenly around your arm. When the cuff is positioned correctly, close thevelcro fastener FIRMLY. Make certain the cuff fits snugly around your arm.The cuff should make good contact with your skin. You should be able to fit...

Page 9 - a) All display symbols appear for approximately

8 705CP-II English How to take areading Press the (O/I) button. a) All display symbols appear for approximately one second. b) When the monitor becomes ready to measure, the ( ) symbol appears on the display. Press the (START ) button and remain still. As the cuff begins to inflate, the monitorautom...

Page 10 - START; • When 28 sets of readings are stored in memory,; Instructions for special conditions:; • If your systolic pressure is known to be more than; Do not apply more pressure than necessary.

9 705CP-II English START Continue to press button When the measurement is complete, the cuffcompletely deflates and your blood pressure andpulse rate are displayed. NOTE : The monitor automatically stores blood pressureand pulse rate into the memory. • When 28 sets of readings are stored in memory, ...

Page 11 - ) button to recall stored readings; • To delete all the stored readings, press the (

10 705CP-II English How to use thememoryfunction This monitor has a memory capable of storing 28sets of readings. Every time you complete themeasurement, the monitor automatically stores bloodpressure and pulse rate. • Turn on the monitor by pressing the (O/I) button. • Press the ( ) button to recal...

Page 13 - Failure, causes and rectification; Failure and their possible causes; Rectification

12 705CP-II English Failure, causes and rectification Failure and their possible causes Incorrect measurement is indicated by 1. A correct reading could not be obtained because measurement was disturbed bymovement of the body. 2. The cuff is not fitted correctly. 3. Your clothing has constricted you...

Page 14 - Do not wash the cuff or make it wet !

13 705CP-II English Maintenanceand storage • For cleaning the monitor only use a soft, lightly moistened cloth. Do not use petroleum spirits, thinners orsimilar solvents ! • Stains on the cuff can be carefully removed using a moist cloth and soapy water. Do not wash the cuff or make it wet ! • Keep ...

Page 15 - Technical data

14 705CP-II English Technical data This device fulfils the provisions of the EC directive93/42/EEC (Medical Device Direc tive). This bloodpressure monitor is designed according to theEuropean standard EN1060, Non-invasive sphygmo-manometers Part 1: General requirements and Part3: Supple mentary requ...

Page 16 - Calibration

15 705CP-II English OMRON spareparts Calibration The accuracy of this blood pressure monitor hasbeen carefully tested and is designed for a longservice life. It is generally recommended to have themonitor inspected every two years to ensure correctfunctioning and accuracy. Please consult yourauthori...

Page 17 - Some useful information about blood pressure; What is Blood Pressure ?

16 705CP-II English Some useful information about blood pressure What is Blood Pressure ? Blood pressure is a measure of the force of blood flowing against the walls of thearteries. Arterial blood pressure is constantly changing during the course of the heartscycle. The highest pressure in the cycle...

Page 18 - What Causes High Blood Pressure ?; Why is it a Good Thing To Measure Blood Pressure at Home ?; Fluctuation within a Day

17 705CP-II English What Causes High Blood Pressure ? Blood pressure is only classed as high if it doesnt go down when you rest. Permanently raised bloodpressure can be caused by several factors such as hardening of the arteries, smoking or drinking toomuch alcohol. It can also be caused by choleste...

Page 19 - Introduction; Replace the battery cover.Remove the batteries if

18 705CP-II English Introduction The OMRON printer can be conected to OMRONblood pressure monitors with IT functions. Description Paper Feed Print Graph Print All Data Print Current Data/Stop Printing Printer Cover Printer Cable Plug Power/Operation Light Batteryinstallation /replacement Slide the b...

Page 20 - Remove printer cable plug from the printer unit.

19 705CP-II English How to connectthe printer unit Remove printer cable plug from the printer unit. Connect printer cable plug cord to the main unit.The circle on the cable plug should face up. Open printer cover in the direction indicated bythe arrow symbol and remove paper roll from themain unit. ...

Page 21 - NOTE

20 705CP-II English OMRON IT blood pressure monitors have the abilityto print all the readings stored in memory. NOTE : • Make sure printer-unit is connected to main unit (see How to Connect Printer-Unit) • Do not use printer-unit without loading printer paper (see How to Load PrinterPaper). Imprope...

Page 22 - Date; : If Time and Date was not initially set up

21 705CP-II English • Month(s) The month or months will be printed.Example: If the blood pressure reading was storedbetween months March-June, then the printout willindicate “3-6”. • Date Only the days date (1-31) will be printed.Example: If the blood pressure reading was storedon June 1st, then the...

Page 23 - Troubleshooting

22 705CP-II English Troubleshooting Error Indicator Cause Correction Printer cable plug is not connected properly or damaged Connect correctly reference p.10 Contact your OMRON distributor. Take paper jammed from the printer and install again Purchase new printer paper Batteries are worn No readings...

Page 24 - Manufacturer

OMRON HEALTHCARE Co., Ltd. 53, Kunotsubo, Terado-cho, Muko, Kyoto,617-0002 JAPAN OMRON HEALTHCARE EUROPE B.V. Scorpius 33, 2132 LR Hoofddorp, THE NETHERLANDSwww.omron-healthcare.com OMRON (DALIAN) CO., LTD. Dalian, CHINA OMRON HEALTHCARE UK LTD. Opal Drive, Fox Milne, Milton Keynes, MK15 0DG, U.K. O...