OmniMount PMD.5 - Manuals

2 Model s : PMD.5 — PMD1 — PMD2 Part Description Qty. Mount Assembly Hard-ware A Top Projector Plate 1 B Bottom Projector Plate 1 C Pipe Drop Assembly 1 D Plastic Cover 1 E Ceiling Plate 1 Bag F Hex Screw: ¼”-20 X ¼” 1 (d) G Screw: ¼”-20 X 3/8” 2 (c) H Hex Screw: ¼”-X 5/8” 4 (d) I Hex Screw: ¼”-X ½”...

6 Repeat this procedure for the remaining threaded inserts. (Fig. 10) Note: A 1” plastic spacer (3) is included for projectors with uneven mounting surfaces. Trim the plastic spacer to the required length, and install on appropriate mounting screw. Fig. 8 Fig. 9 Fig. 10 Once all mounting screws have...

4 Flush Ceiling Mount For installations with low ceilings, the flush ceiling mount should be used. Note: cable management is not available with the flush mount. Proceed to step 3. Wall Mount With the addition of the OmniMount PMD-WM wall mount (sold separately); the PMD can be mounted to a wall inst...