Omega OGG96A - Manuals

FIGURE 2. Clearance above and around domestic cookers Extract from AS5601 1 Overhead clearances - (Measurement A) Range hoods and exhaust fans shall be installed in accordance with the manufacturer's instructions. However, in no case shall the clearance between the highest part of the hob of the coo...

GAS CONNECTION This appliances is suitable for installation with Natural Gas or ULPG Refer to page 11 for the relevant burner pressure and appropriate injector sizes. When the appliance is to be connected to Natural Gas then the pressure regulator supplied must be fitted to the gas inlet. A test poi...

ELECTRICAL CONNECTI ON Any electrical writing MUST be carried in compliance with the local electrical authority regulations by a qualified electrician. The appliance has a 3 pin plug attached, to be plugged .into a 240Volt, 50HZ, single phase outlet. WARNING -ALL APPLIANCES MUST BE EARTHED: Omega Ap...

CHANGI NG GAS INJECTORS-CONVERSI ON OF GAS TYPE Your cooktop has been manufactured for operation on the gas type marked on the hob/carton. In some cases, it may be necessary to convert to convert the burners for use with another type of gas. 1) Replacement injectors are supplied with the appliance o...

FIGURE 4 & 5 NOMINAL GAS CONSUMPTI ON Gas Type; Natural Gas Burner Injector size mm MJ/h - NG (1.00 kPa) Small .90 3.6 Medium 1.15 6.3 Large 1.55 10.8 Wok 1.75 13.2 Fish 1.55 10.8 ULPG Burner Injector size mm MJ/h - NG (2.75 kPa) Small 0.55 4.0 Medium 0.66 6.3 Large 0.85 10.2 Wok 0.98 12.6 Fish ...