Omega OCI64B - Manuals - manualsarea.com

Page 2 - Thank you for purchasing an Omega appliance; welcome addition to the family.; Further Information; and specifications please visit; Registering Your Warranty; For peace of mind you can register your warranty at; Contact Us

2 Thank you for purchasing an Omega appliance Tailored for the modern aesthetic and lifestyle of busy people, your new Omega Appliance will make a welcome addition to the family. Omega caters to style-savvy customers who look for balance between stunning form and clever function. This means a combin...

Page 3 - depot or by placing them into appropriate collection containers.

3 READ THE INSTRUCTION BOOKLET BEFORE INSTALLIN G AND USING THE APPLIANCE. It is important that you retain these instructions, proof of purchase as well as other important documents about this product for future reference. The manufacturer will not be responsible for any damage to property or to per...

Page 4 - Important Safety Warnings; IMPORTANT

4 Important Safety Warnings IMPORTANT : Read the assembly instruction section and safety precautions of this booklet carefully before removing the contents of this carton. 1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities,...

Page 5 - to faulty installation.; supervised continuously.

5 Important Safety Warnings 20. The appliance must be installed and put into operation by an authorised technician under the conditions provided by the manufacturer in this manual. The manufacturer cannot be held responsible for any damage that might occur due to faulty installation. 21. Damage can ...

Page 6 - Appliance Details; COOKTOP – Directly wired to mains supply

6 Appliance Details ELECTRICAL DETAILS: COOKTOPS: Rated Voltage: Single phase 220-240Vac 50Hz, 3-phase 380-415Vac 50Hz 7400W COOKTOP – Directly wired to mains supply This information can be found on the rating plate (identification plate) affixed to the underside of the appliance. SIZES: Relevant Si...

Page 7 - Installation Instructions; ELECTRICAL CONNECTIONS; LOCAL AUTHORITY REQUIREMENTS; at any point along its length.

7 Installation Instructions ELECTRICAL CONNECTIONS LOCAL AUTHORITY REQUIREMENTS Installation is only permitted by a licensed electrician and carried out according to instructions provided by the manufacturer. Incorrect installation might cause harm and damage, for which the manufacturer accepts no r...

Page 8 - cut off before any adjustments or maintenance work is done on it.; PREPARATION FOR INSTALLATION AND USE

8 Installation Instructions The adjacent furniture must be able to withstand a minimum temperature rise of 50°C above the ambient temperature of the room it is located in, during periods of use. The power supply to the appliance must be cut off before any adjustments or maintenance work is done on i...

Page 9 - INSTALLATION OF BUILT IN COOKTOP; Cut out a hole in the bench top as shown below. Place the cooktop

9 Installation Instructions INSTALLATION OF BUILT IN COOKTOP In order to prevent leakage of any liquids on the counter, a special sealing tape is supplied together with your cooktop. Apply this seal around the bottom edge of the cooktop (see below). The brackets are installed to hold the cooktop in ...

Page 11 - Operating Instructions; Selecting A Cooking Zone

11 Operating Instructions The basic layout of the induction cooktop is shown in the diagram below. The induction cooktop appliance is operated by touching buttons, with the functions confirmed by LED displays and acoustic signals. Turning On and Turning Off the Cooktop Appliance NOTE: Do not operate...

Page 13 - Operating Time Limitation; time for this heat setting is re-applied.; Residual Heat Functions; timer button

13 Operating Instructions Operating Time Limitation The cooktop control has a limitation on the operating time. If the heat setting for a hotplate has not been changed for a certain time, then the hotplate will turn off automatically (a “0” is displayed for 10 seconds, then the residual heat sign “H...

Page 14 - Cleaning; CLEANING THE COOKTOP; heat zones, which is; NOT; covered under warranty.

14 Cleaning NOTE: Cleaning and maintenance operations must only be carried out when the cooktop is cool (all residual heat indicators are off). The appliance should be disconnected from the power outlet or turned off at your isolation switch before commencing any cleaning process. Do not use plastic...