Oki 6020E - Manuals - manualsarea.com

Page 3 - Organization; Contents

iii Organization and Contents OKI OkiLAN 6020e User’s Guide Organization This manual has been divided into eight sections. SectionI contains and installation instructions for the OkiLAN6020e print server. Section II contains information about managementfeatures, an extremely valuable set of OkiLAN 6...

Page 4 - Index

iv Organization and Contents OKI OkiLAN 6020e User’s Guide Section IV: TCP/IP .................................................. IV-1 Chapter 1: Introduction ................................................ IV-5Chapter 2: Configuring the OkiLAN 6020e ................ IV-7Chapter 3: TCP/IP Configurat...

Page 5 - Network Operating Systems; Overview; TCP/IP and Windows NT

v Network Operating Systems OKI OkiLAN 6020e User’s Guide Network Operating Systems Overview OkiLAN 6020e simultaneously supports several networkprotocols in various combinations. Below is a list ofsupported network protocols accompanied with NOS/OSrequirements. TCP/IP and Windows NT TCP/IP, FTP and...

Page 6 - Service Information; Note: This information is valid for the United States and; Oki Data On Line

vi Technical Support OKI OkiLAN 6020e User’s Guide Service Information Note: This information is valid for the United States and Canada only. Oki Data On Line Visit the OKI DATA Web Site at http://www.okidata.com for the latest information on: • Software drivers• Product guides• Customer support• Co...

Page 7 - Oki Data Customer Support Representatives; - In Latin America, contact the Latin America Service; United States

vii Technical Support OKI OkiLAN 6020e User’s Guide Oki Data Customer Support Representatives Agents are available 24 hours a day, 7 days a week at1-800-OKI-DATA (1-800-654-3282). Please be sure thatyou are calling from a telephone close to your printer, soyou can describe your problem accurately. O...

Page 8 - Brazil

viii Technical Support OKI OkiLAN 6020e User’s Guide Brazil Oki Data do Brasil, Ltda. Tel: 0800-11-5577Fax: 55-11-5012-0267 Mexico Oki Data de Mexico, S.A. de C.V. Tel: 525-263-8780Fax: 525-250-3501

Page 9 - numbers

ix Technical Support OKI OkiLAN 6020e User’s Guide When you call Technical Support, the followinginformation will help us answer your questions morequickly and accurately. Please be able to identify thefollowing: • OkiLAN model number• Serial number• Configuration sheet settings• Type of network cab...

Page 11 - Hardware Installation

Hardware Installation Section I: HardwareInstallation

Page 13 - In This Section

Hardware Installation I - 3 Section I - Hardware Installation OKI OkiLAN 6020e User’s Guide In This Section Powering On the OkiLAN 6020e ................ I-7Printing a Configuration Sheet ..................... I-8

Page 15 - Installing the OkiLAN 6020e

Hardware Installation I - 5 Section I - Hardware Installation OKI OkiLAN 6020e User’s Guide The OkiLAN 6020e Pocket Print Server enablesEthernet network users to connect to a printer with abidirectional parallel port. The OkiLAN 6020e can bemade to work with any Centronics or IEEE-1284 paral-lel int...

Page 16 - Secure the OkiLAN 6020e with the wire clips on the

I - 6 Section I - Hardware Installation OKI OkiLAN 6020e User’s Guide 3. Secure the OkiLAN 6020e with the wire clips on the printer’s connector. 4. Plug the power adapter wire into the power jack on the OkiLAN 6020e. Then plug the power adapterinto a 120 VAC wall outlet.Please note that some countri...

Page 17 - Powering On the OkiLAN 6020e; Green indicator

Hardware Installation I - 7 Section I - Hardware Installation OKI OkiLAN 6020e User’s Guide 5. Attach the 10/100Base-T UTP cable to the recep- tacle on the back of the OkiLAN 6020e.Attach the other end of the cable to the Network. Powering On the OkiLAN 6020e Turn printer power on. The red and green...

Page 18 - Printing a Configuration Sheet

I - 8 Section I - Hardware Installation OKI OkiLAN 6020e User’s Guide Note: If the red and green indicators do not display asindicated above, see Hardware Troubleshooting at theend of this section. Printing a Configuration Sheet To print configuration information, press the Test buttonon the front o...

Page 19 - Introduction

Hardware Installation I - 9 Section I - Hardware Installation OKI OkiLAN 6020e User’s Guide Installing the OkiLAN 6020eSoftware Utilities Introduction Your OkiLAN 6020e Pocket Print Server comes withtwo types of software utilities: OkiView 32 and OkiNetUtilities.OkiView 32OkiView 32 is a general pur...

Page 20 - click Start; proper location for installation, then click Install.; Windows Utility Groups:; NetWare Management Utilities

I - 10 Section I - Hardware Installation OKI OkiLAN 6020e User’s Guide Installing the OkiLAN UtilitiesSoftware in Windows 1. Insert the OkiLAN CD into your CD-ROM drive.2. The Setup screen appears automatically (if it doesn’t, click Start ® Run, then enter D:\setup, if “D” is your CD-ROM drive). 3. ...

Page 21 - OkiNet for the Apple; Installing OkiView 32

Hardware Installation I - 11 Section I - Hardware Installation OKI OkiLAN 6020e User’s Guide OkiNet for the Apple ® MacIntosh ® Utility Note: The OkiLAN Utilities CD is designed for morethan one type of OkiLAN print server and includesfeatures that do not apply to the OkiLAN 6020e. Specifi-cally, Ap...

Page 22 - c) Connect to a network that a currently working PC or; Hardware Troubleshooting; Status Indicator

I - 12 Section I - Hardware Installation OKI OkiLAN 6020e User’s Guide Solutiona) Unplug the OkiLAN 6020e power adapter from the wall outlet. Remove the network cable. Plug thenetwork cable back in until you hear a positive click.Check the other end of the cable in the same manner.Plug the OkiLAN 60...

Page 23 - b) The OkiLAN 6020e power supply has failed or there

Hardware Installation I - 13 Section I - Hardware Installation OKI OkiLAN 6020e User’s Guide LED DisplayGreen indicator is flashing slowly (1 timer/sec);the OkiLAN 6020e is trying to print a job.ProblemThe printer is malfunctioning or does not have sufficientpaper or toner.SolutionVerify that the pr...

Page 28 - Note: If you attempt a reset while a job is printing, the job; Traps

II - 4 Section 2 - Chapter 1 - SNMP OKI OkiLAN 6020e User’s Guide Note: If you attempt a reset while a job is printing, the job may not print successfully. Certain variables are critical, that is, they change afundamental operating parameter of the OkiLAN6020e. These variables are saved by the OkiLA...

Page 29 - Security

II - 5 Section 2 - Chapter 1 - SNMP OKI OkiLAN 6020e User’s Guide Advanced Management In order to receive OkiNet Alert traps, the OkiLAN6020e must have bi-directional status enabled (it isdisabled by default). Extended Status can be enabledthrough the OkiLAN 6020e Configuration utility(telnet) from ...

Page 30 - Software Requirements; Note: For more information on installing and using; NetWare Configuration

II - 6 Section 2 - Chapter 2 - HP JetAdmin Support OKI OkiLAN 6020e User’s Guide Chapter 2HP JetAdmin Support Overview This section contains instructions and information onhow to configure and obtain diagnostic informationfrom your OkiLAN 6020e using the Hewlett-PackardJetAdmin software. Software Re...

Page 31 - AppleTalk Configuration; Note: For JetAdmin to function correctly with the

II - 7 Section 2 - Chapter 2 - HP JetAdmin Support OKI OkiLAN 6020e User’s Guide Advanced Management 7. Select the desired queues from the list of Available Queues to be added into service. Click the Servicebutton to move the selection to the Serviced Queuescolumn. When all queues have been added, c...

Page 34 - Note: If you experience difficulties connecting to the; Connecting to the OkiLAN 6020e; Note: It is not currently possible to discover all

II - 10 Section 2 - Chapter 4 - OkiLAN 6020e Web Configuration OKI OkiLAN 6020e User’s Guide Chapter 4OkiLAN 6020e WebConfiguration Overview This section contains instructions and information onhow to configure and manage your OkiLAN 6020eusing a standard Web browser. Software Requirements TCP/IP Pr...

Page 35 - Note: As a layer of security, the TCP port number

II - 11 Section 2 - Chapter 4 - OkiLAN 6020e Web Configuration OKI OkiLAN 6020e User’s Guide Advanced Management Note: As a layer of security, the TCP port number that the device uses to communicate withbrowsers, called the HTTP port, can bemodified from a default of 80. If the port ismodified, the ...

Page 36 - Configuration; Select the Login as Admin link under the; On the Enter Network Password screen, enter the; Select the Submit Changes button at the bottom of; the page to send the new values to the print server.

II - 12 Section 2 - Chapter 5 - Additional Management Features OKI OkiLAN 6020e User’s Guide Configuration 1. Select the Login as Admin link under the Configuration menu. 2. On the Enter Network Password screen, enter the User name and Password. The default administrator User name is admin. Thedefau...

Page 37 - A Request Results page will appear indicating one of; • Configuration Successfully Set: The values have

II - 13 Section 2 - Chapter 4 - OkiLAN 6020e Web Configuration OKI OkiLAN 6020e User’s Guide Advanced Management 5. A Request Results page will appear indicating one of the following: • Configuration Successfully Set: The values have been successfully saved to the print server. Go toanother page to ...

Page 38 - Web Admin Configuration; Note: The Admin Password is also used as the Telnet

II - 14 Section 2 - Chapter 5 - Additional Management Features OKI OkiLAN 6020e User’s Guide * The following values are currently onlyconfigurable through the Web browserinterface: Web Admin Configuration Under the Configuration menu, select the Admin(Web)link. • Admin Name - The name used to access...

Page 39 - Status; Contact

II - 15 Section 2 - Chapter 4 - OkiLAN 6020e Web Configuration OKI OkiLAN 6020e User’s Guide Advanced Management Status The home page for the print server shows general statusinformation including the status of all printers currentlyattached. For more detailed status information, selectthe View Cnfg...

Page 40 - Reset; OkiLAN 6020e Server Discovery; Select Save View to HTML under the File menu.

II - 16 Section 2 - Chapter 5 - Additional Management Features OKI OkiLAN 6020e User’s Guide Reset Reset Reset the print server by selecting the Reset link underthe Reset menu. A message will appear asking you toconfirm the reset. Restore Select Restore Defaults under the Reset menu torestore select...

Page 41 - Troubleshooting; Server Connection; • The print server only supports two simultaneous; Login; • If you forget the administrator password, restoring; • Web browsers will generally cache previously

II - 17 Section 2 - Chapter 4 - OkiLAN 6020e Web Configuration OKI OkiLAN 6020e User’s Guide Advanced Management Troubleshooting Server Connection • The print server only supports two simultaneous HTTP connections. If your browser fails to connectto the print server, the browser may be trying to ope...

Page 42 - OkiNet Alert

II - 18 Section 2 - Chapter 5 - Additional Management Features OKI OkiLAN 6020e User’s Guide Chapter 5Additional ManagementFeatures OkiNet Alert OKI OkiNet Alert enterprise management utility allowsadministrators to proactively manage printers by beingimmediately alerted to printing problems before ...

Page 43 - OkiNet for NDS

II - 19 Section 2 - Chapter 5 - Additional Management Features OKI OkiLAN 6020e User’s Guide Advanced Management OkiNet for NDS OkiNet for NDS allows administrators to create andmanage OKI print server objects in the NDS tree.OkiNet for NDS integrates into Novell’s NetWareAdministrator, NetWareAdmin...

Page 45 - NetWare

Page 48 - Chapter 1: Introduction; versions 4.1 and later; Before You Start; • You should be familiar with network administration

III - 4 Section 3 - Chapter 1 - Introduction OKI OkiLAN 6020e User’s Guide Chapter 1: Introduction Overview This section contains instructions and information onhow to configure your OkiLAN 6020e in the NetWareenvironment. There are three environments in which to configure theOkiLAN 6020e: • Bindery...

Page 49 - Feature

III - 5 Section 3 - Chapter 1 - Introduction OKI OkiLAN 6020e User’s Guide NetW are Selecting PServer orRPrinter/NPrinter Mode Your OkiLAN 6020e supports both PServer andNPrinter mode. There are several factors to considerwhen choosing which mode to use. In PServer mode, the OkiLAN 6020e operates as...

Page 50 - Chapter 2; Note

III - 6 Section 3 - Chapter 2 - OkiNet for NetWare OKI OkiLAN 6020e User’s Guide Chapter 2 OkiNet for NetWare Overview This chapter contains information about how toconfigure the OkiLAN 6020e in Bindery and NDSenvironments using the OkiNet for NetWare utility. Note : OkiNet for NetWare contains mini...

Page 51 - Running OkiNet for NetWare; OkiNet; OkiNet for NetWare; Print Server; May apply to other OkiLAN print server models.

III - 7 Section 3 - Chapter 2 - OkiNet for NetWare OKI OkiLAN 6020e User’s Guide NetW are Running OkiNet for NetWare To run the utility, double-click on the OkiNet icon. The main OkiNet for NetWare screen will display. By default, the All Print Servers view is selected and all print servers attached...

Page 52 - NetWare Configuration Options; file tab. The following screen will; PServer or RPrinter Mode; Default File Server

III - 8 Section 3 - Chapter 2 - OkiNet for NetWare OKI OkiLAN 6020e User’s Guide NetWare Configuration Options To configure options specific to the NetWare protocol,select the NetWare file tab. The following screen will display: PServer or RPrinter Mode Several factors should be considered when choo...

Page 53 - NDS Settings; Preferred File Server

III - 9 Section 3 - Chapter 2 - OkiNet for NetWare OKI OkiLAN 6020e User’s Guide NetW are NDS Settings NDS settings need to first be created and setup usingthe NWAdmin or PConsole utility. Create an NDS printserver object. Then, create one NDS printer object peroutput port. For example, Printer 1 go...

Page 54 - NetWare Queue Load Balancing; NetWare Port Configuration Options; TCP/IP Configuration Options; HELP; button on the bottom right

III - 10 Section 3 - Chapter 2 - OkiNet for NetWare OKI OkiLAN 6020e User’s Guide NetWare Queue Load Balancing Print jobs can be distributed to multiple printers onselected queues by selecting the same queue multipletimes and selecting a different output port for eachqueue entry. NetWare Port Config...

Page 55 - EtherTalk Configuration Options; EtherTalk; Output Port Configuration Options; Output Port; Port Number; OFF

III - 11 Section 3 - Chapter 2 - OkiNet for NetWare OKI OkiLAN 6020e User’s Guide NetW are EtherTalk Configuration Options To modify configuration settings specific to theEtherTalk protocol such as the name and zone. Forspecific information on other EtherTalk options, seeSection VII, EtherTalk , or ...

Page 56 - PostScript; Printer Type; Other; and enter the; PCL Switch Sequence

III - 12 Section 3 - Chapter 2 - OkiNet for NetWare OKI OkiLAN 6020e User’s Guide • PostScript - Inserts the appropriate character string in front of each print job to switch the printer to thePostScript printer language. • Automatic - Enables the auto language sensing function. This function examin...

Page 57 - Bidirectional Printer Status Support; SNMP Configuration Options; GET; SNMP

III - 13 Section 3 - Chapter 2 - OkiNet for NetWare OKI OkiLAN 6020e User’s Guide NetW are Bidirectional Printer Status Support Enable this option for enhanced status frombi-directional printers that support PJL. Output Type Select the desired level of support for 1284communications. The following s...

Page 58 - Fill in the following information:; System Name; Enter a description of the OkiLAN 6020e location.; Get Community Name; public; Set Community Name

III - 14 Section 3 - Chapter 2 - OkiNet for NetWare OKI OkiLAN 6020e User’s Guide Fill in the following information: System Name Enter the name of your choice. This name will identifythe OkiLAN 6020e in your SNMP-based managementprogram. System Contact Enter any information useful to a user if probl...

Page 59 - Trap Community Name; The; SNMP Traps Configuration; To configure SNMP traps, select the; SNMP Traps; file; Protocol

III - 15 Section 3 - Chapter 2 - OkiNet for NetWare OKI OkiLAN 6020e User’s Guide NetW are Trap Community Name Enter the community name which will be used whentraps are sent from the OkiLAN 6020e. This settingallows trap utilities to only accept traps from deviceswith appropriate community names. Th...

Page 60 - Trap Destination; NetWare Protocol; Ports to Trap; Saving the Configuration; OK

III - 16 Section 3 - Chapter 2 - OkiNet for NetWare OKI OkiLAN 6020e User’s Guide Trap Destination • NetWare Protocol - Enter the network number and hardware address, respectively, to which traps willbe sent. To broadcast traps to all addresses on allnetworks, enter FFFFFFFF (8 characters) in the fi...

Page 61 - Enabling/Disabling Protocols; Protocols; Print Configuration

III - 17 Section 3 - Chapter 2 - OkiNet for NetWare OKI OkiLAN 6020e User’s Guide NetW are Enabling/Disabling Protocols To enable or disable protocols on the OkiLAN 6020e,select the Protocols file tab. Select each protocol you wish to enable. If you disable a protocol, the OkiLAN6020e will no longer...

Page 62 - Restoring Factory Default Settings; option. Choose one or more of the; Output Ports; Once you have chosen the desired options, select; Restore; . To completely restore the print server to

III - 18 Section 3 - Chapter 2 - OkiNet for NetWare OKI OkiLAN 6020e User’s Guide CAUTION: Make sure there are no print jobs activewhen you reset the OkiLAN 6020e. All protocols willbe restarted. If you attempt a reset while a job isprinting, the job may not print successfully. Restoring Factory Def...

Page 63 - Creating Customized Views; Creating a New Customized View

III - 19 Section 3 - Chapter 2 - OkiNet for NetWare OKI OkiLAN 6020e User’s Guide NetW are CAUTION: Make sure there are no active print jobswhen you select Restore Factory Defaults. If you resetthe OkiLAN 6020e while a job is printing, the job maynot print successfully. Creating Customized Views Oki...

Page 64 - Modifying View Settings; Name; Display Filter; Search Local Network

III - 20 Section 3 - Chapter 2 - OkiNet for NetWare OKI OkiLAN 6020e User’s Guide Modifying View Settings Before modifying the settings, select the name of theview you wish to edit from the Name field. Display Filter The filter option displays only those print serversmatching specific criteria. The ...

Page 65 - Specify Devices/Networks; Sort; Add

III - 21 Section 3 - Chapter 2 - OkiNet for NetWare OKI OkiLAN 6020e User’s Guide NetW are • Specify Devices/Networks - This method adds specific print servers (or groups of print servers) tothe list. This can be useful when only a subset of thelist of OkiLAN 6020e products is desired. To select all...

Page 66 - Refresh; Automatic Refresh; Special Options; File; Serial/Network Numbers; Get

III - 22 Section 3 - Chapter 2 - OkiNet for NetWare OKI OkiLAN 6020e User’s Guide Refresh The refresh rate defines how often the OkiNet forNetWare utility updates the main print server list. Todefine a refresh rate, select the Automatic Refresh box and then enter the refresh rate in the field provid...

Page 67 - Set; Delete; Serial/Network Number

III - 23 Section 3 - Chapter 2 - OkiNet for NetWare OKI OkiLAN 6020e User’s Guide NetW are Set Community Name Enter the Set Community Name necessary to access the OkiLAN 6020e or group of OkiLAN 6020e productsselected. Add Select the Add button to define access to a new OkiLAN 6020e or a group of Ok...

Page 68 - • OkiNet for NDS installation for NetWare version 4.1

III - 24 Section 3 - Chapter 3 - OkiNet for NDS OKI OkiLAN 6020e User’s Guide Chapter 3OkiNet for NDS Overview OkiNet for NDS is a Dynamic Link Library (DLL)which allows users to create and manage OKI printserver objects in the NDS tree. OkiNet for NDSintegrates into Novell’s NetWare Administrator, ...

Page 69 - Login to the directory tree as a user with; Tip for Advanced Administrators

III - 25 Section 3 - Chapter 3 - OkiNet for NDS OKI OkiLAN 6020e User’s Guide NetW are Refer to the following table to determine which methodto use to install OkiNet for NDS: NetWareVersion Client Operating System Windows 3.x Windows 95/98Windows NT/2000 NetWare 4.1 See Installing OkiNet for NDS for...

Page 70 - Login to the directory tree as a user with Admin

III - 26 Section 3 - Chapter 3 - OkiNet for NDS OKI OkiLAN 6020e User’s Guide Installing OkiNet for NDS for NovellNetWare 4.x, NetWare 5.x, andWindows 3.x OkiNet for NDS must be installed in the same locationyou have installed NetWare Administrator. This may belocated on the file server or on an ind...

Page 71 - or

III - 27 Section 3 - Chapter 3 - OkiNet for NDS OKI OkiLAN 6020e User’s Guide NetW are Installing OkiNet for NDS for NovellNetWare 4.x, NetWare 5.x,Windows 95/98 and Windows NT/2000 OkiNet for NDS must be installed in the same locationyou have installed NetWare Administrator. This may belocated on t...

Page 72 - Creating a New OkiLAN 6020e Object; Select the container (also known as organizational

III - 28 Section 3 - Chapter 3 - OkiNet for NDS OKI OkiLAN 6020e User’s Guide Creating a New OkiLAN 6020e Object To create a new OkiLAN 6020e object from Novell’sNetWare Administrator, perform the following steps: 1. Select the container (also known as organizational unit) in which you want the obje...

Page 75 - NWAdmin; Removing the OKI Print Server Class; Tools; Remove OKI; Create New Object

III - 31 Section 3 - Chapter 3 - OkiNet for NDS OKI OkiLAN 6020e User’s Guide NetW are Configuring the OkiLAN 6020e UsingOkiNet for NDS The following steps outline how to configure anOkiLAN 6020e. 1. From the NWAdmin screen, select (double-click) the OkiLAN 6020e you wish to configure. 2. Set the ap...

Page 76 - Adding the OKI Print Server Class; Define OKI Printing Device

III - 32 Section 3 - Chapter 3 - OkiNet for NDS OKI OkiLAN 6020e User’s Guide The install utility on the installation diskette can also beused to remove the OKI print server class. This utilityremoves the class from Novell’s NetWareAdministrator and removes all the associated files thatwere copied d...

Page 77 - Chapter 4; Add Resources

III - 33 Section 3 - Chapter 4 - Using the OkiLAN 6020e in NDPS OKI OkiLAN 6020e User’s Guide NetW are Chapter 4 Using the OkiLAN 6020e in NDPS (NetWare 4.x and 5.1) Introduction Novell  Distributed Print Services  (NDPS  ) is Novell’s new printing architecture for use with NetWare versions 4.x a...

Page 78 - Browse

III - 34 Section 3 - Chapter 4 - Using the OkiLAN 6020e in NDPS OKI OkiLAN 6020e User’s Guide 7. Click Browse to display the Select Printer Driver dialog box. Locate the appropriate printer driver .INF file. 8. Select the .INF file and click OK . The .INF file and path is selected in the Resource lo...

Page 79 - Setting Up the OkiLAN 6020e for Public Access Printers

III - 35 Section 3 - Chapter 4 - Using the OkiLAN 6020e in NDPS OKI OkiLAN 6020e User’s Guide NetW are Setting Up the OkiLAN 6020e ThroughNWAdmin32 There are two types of printers available with NDPS. One is PublicAccess, which anyone on the tree can get to. The other is PrivateAccess, which require...

Page 87 - OkiLAN 6020e supports TCP/IP methods for printing:; • Manual

IV - 5 Section 4 - Chapter 1 - Introduction OKI OkiLAN 6020e User’s Guide TCP/IP Chapter 1Introduction Overview This section contains instructions and information onhow to configure your OkiLAN 6020e. You will also beinstructed on how to set up your host computers to printto the OkiLAN 6020e using t...

Page 88 - Network Preparation

IV - 6 Section 4 - Chapter 1 - Introduction OKI OkiLAN 6020e User’s Guide Network Preparation • You should be familiar with network administration as well as the physical setup and operation of yournetwork. • Advise users of possible disruption during installation. • Make sure the serial number and ...

Page 89 - Choosing an IP Address; permanently

IV - 7 Section 4 - Chapter 2 - Configuring the OkiLAN 6020e OKI OkiLAN 6020e User’s Guide TCP/IP Chapter 2Configuring the OkiLAN 6020e Choosing an IP Address Every TCP/IP network device is required to have aunique IP address. The IP address can be permanently stored using one of the following: • OKI...

Page 90 - Configuring the OkiLAN 6020e; OkiLAN 6020e Configuration Utility; and; verify communication by; Assigning the IP Address

IV - 8 Section 4 - Chapter 2 - Configuring the OkiLAN 6020e OKI OkiLAN 6020e User’s Guide Configuring the OkiLAN 6020e There are four utilities available to configure theOkiLAN 6020e for TCP/IP printing. You may usewhichever utility is best suited for your needs. • OkiNet for TCP/IP - Windows TCP/IP...

Page 91 - Gleaning

IV - 9 Section 4 - Chapter 2 - Configuring the OkiLAN 6020e OKI OkiLAN 6020e User’s Guide TCP/IP Gleaning If an IP address has not been permanently assignedwhen the OkiLAN 6020e is powered on or reset, it willlook for a ping packet on the network. If the OkiLAN 6020e receives a ping packet within tw...

Page 92 - DHCP; lease

IV - 10 Section 4 - Chapter 2 - Configuring the OkiLAN 6020e OKI OkiLAN 6020e User’s Guide DHCP The Dynamic Host Configuration Protocol (DHCP)provides a framework for passing configurationinformation to hosts on a TCP/IP network in a client/server fashion. DHCP is based on the BootstrapProtocol (BOO...

Page 93 - Static Route Entry; command is used to place the; RARP or BOOTP

IV - 11 Section 4 - Chapter 2 - Configuring the OkiLAN 6020e OKI OkiLAN 6020e User’s Guide TCP/IP Static Route Entry When the OkiLAN 6020e is powered on or reset andno permanent IP address has been assigned, it willattempt to obtain an IP address through Gleaning,RARP, BOOTP or DHCP. If the OkiLAN 6...

Page 94 - man bootpd; Other Utilities

IV - 12 Section 4 - Chapter 2 - Configuring the OkiLAN 6020e OKI OkiLAN 6020e User’s Guide Most UNIX operating systems support either the RARPor BOOTP protocol. To find out which protocol youroperating system supports, request the manual page forthe protocol’s daemon (e.g. man bootpd or man rarpd ),...

Page 95 - Verifying Access to the OkiLAN 6020e; Use the

IV - 13 Section 4 - Chapter 2 - Configuring the OkiLAN 6020e OKI OkiLAN 6020e User’s Guide TCP/IP Verifying Access to the OkiLAN 6020e Use the ping utility to verify access to the OkiLAN 6020e. ping < IP address of OkiLAN 6020e > If the OkiLAN 6020e does not respond, your networkor the device ...

Page 96 - Application Considerations

IV - 14 Section 4 - Chapter 3 - TCP/IP Configuration and Printing OKI OkiLAN 6020e User’s Guide Chapter 3TCP/IP Configuration andPrinting Overview The OkiLAN 6020e supports printing from computersusing TCP/IP and any of the following printingprotocols: • Line Printer Redirect/Line Printer Daemon (lp...

Page 97 - Remote Print Queue Name; Configure Port

IV - 15 Section 4 - Chapter 3 - TCP/IP Configuration and Printing OKI OkiLAN 6020e User’s Guide TCP/IP Configuring for TCP/IP NetworkPrinting Most computers that support TCP/IP network printinguse the Remote Line Printer Daemon (LPD) protocol.This protocol was originally part of the BerkeleySoftware...

Page 98 - ChemDeptLF2; FF; queueFF2; LF; queueLF2; NF; queueNF2

IV - 16 Section 4 - Chapter 3 - TCP/IP Configuration and Printing OKI OkiLAN 6020e User’s Guide The OkiLAN 6020e will parse the remote queue nameand search for certain characters at the end which tellhow to convert an ASCII print job. The print serveruses FF, LF and NF as ASCII conversion specifiers...

Page 99 - Configuring a BSD-Style Print Queue; The entry should be similar to the following:

IV - 17 Section 4 - Chapter 3 - TCP/IP Configuration and Printing OKI OkiLAN 6020e User’s Guide TCP/IP Configuring a BSD-Style Print Queue For remote BSD-Style LPD printing, add the OkiLAN6020e as a remote printer in the “/etc/printcap”database to each host printing to the OkiLAN 6020e. You can add ...

Page 100 - If you are printing to an ASCII printer that; Remote LPD Printing; lpr

IV - 18 Section 4 - Chapter 3 - TCP/IP Configuration and Printing OKI OkiLAN 6020e User’s Guide log_file_name This is the path to a file where error information fromthe lpd will be logged. Example: If you are printing to an ASCII printer that requires a carriage return/line feed, you may need twosep...

Page 101 - FTP Printing; PUT

IV - 19 Section 4 - Chapter 3 - TCP/IP Configuration and Printing OKI OkiLAN 6020e User’s Guide TCP/IP Note: The Remote LPD implementation of theOkiLAN 6020e does not support any UNIXLPD input or output filters or the directprinting of banner pages. It is possible toconfigure some UNIX systems so th...

Page 102 - QUIT

IV - 20 Section 4 - Chapter 3 - TCP/IP Configuration and Printing OKI OkiLAN 6020e User’s Guide TYPE Changes the representation type usedfor data transfer. Image (or binary) andASCII are the only types supported. ASCII Equivalent to “TYPE ASCII.” BINARY Equivalent to “TYPE BINARY.” IMAGE Equivalent ...

Page 103 - The following example prints a PostScript; Timeout Checking

IV - 21 Section 4 - Chapter 3 - TCP/IP Configuration and Printing OKI OkiLAN 6020e User’s Guide TCP/IP Example: The following example prints a PostScript file called chart.ps to the OkiLAN 6020e printer Port 1using FTP. $ ftp OkiLAN 6020e_name<Enter>Connected to OkiLAN 6020e_name.220 ESI-2810 ...

Page 104 - Raw Port Printing; Host computer software can use a

IV - 22 Section 4 - Chapter 3 - TCP/IP Configuration and Printing OKI OkiLAN 6020e User’s Guide Raw Port Printing Host computer software can use a raw TCP/IP port connection to send data to the OkiLAN 6020e. A TCP/IP port has been assigned to the output port of theOkiLAN 6020e as follows: TCP/IP Por...

Page 105 - System Requirements

IV - 23 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide TCP/IP Chapter 4OkiNet for TCP/IP Overview This section contains information about OkiNet forTCP/IP. OkiNet for TCP/IP provides SNMP-basedsupport for the entire OkiLAN 6020e family of printservers. OkiNet for TCP/IP allo...

Page 106 - Running OkiNet for TCP/IP; All Print Servers

IV - 24 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide Running OkiNet for TCP/IP To run the utility, double-click on the OkiNet icon. Themain OkiNet for TCP/IP screen will display. By default, the All Print Servers view is selected and all print servers attached to the subne...

Page 107 - Configuring TCP/IP Options; IP Address Resolution; Set Permanent

IV - 25 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide TCP/IP Configuring TCP/IP Options To configure options specific to the TCP/IP protocol,select the TCP/IP tab. The following screen willdisplay: Fill in the following information: IP Address Resolution • Set Permanent - S...

Page 108 - Subnet Mask

IV - 26 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide Subnet Mask If your network environment includes subnets, you willwant to set the subnet mask. The subnet mask mustfollow the format XXX.XXX.XXX.XXX, where eachXXX is a number from 0 to 255. The default subnet mask is 0....

Page 109 - Telnet; button on the bottom right of the screen.; button and then select the desired

IV - 27 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide TCP/IP Telnet/HTTP Password: Allows you to modify the current password requiredfor Telnet or HTTP access The default password is the serial number of the OkiLAN 6020e. NetWare and NetWare PortConfiguration Options For sp...

Page 112 - Output Type; Select the appropriate baud rate.

IV - 30 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide Output Type Select the appropriate baud rate. Bidirectional Printer Status Support Enable this option for enhanced status from thebidirectional printer. SNMP Configuration Options SNMP options specify which information i...

Page 113 - System Contact

IV - 31 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide TCP/IP System Contact Enter any information useful to a user if problems withthe OkiLAN 6020e arise. System Location Enter a description of the OkiLAN 6020e location. Get Community Name This field is used to set the comm...

Page 114 - tab. Select each protocol you wish; SNMP Trap Configuration

IV - 32 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide Enabling/Disabling Protocols To enable or disable protocols on the OkiLAN 6020e,select the Protocols tab. Select each protocol you wish to enable. If you disable a protocol, the OkiLAN 6020ewill no longer communicate usi...

Page 115 - - Enter the IP address to which

IV - 33 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide TCP/IP Trap Destination • TCP/IP Protocol - Enter the IP address to which traps will be sent. The IP address must follow theformat XXX.XXX.XXX.XXX, where each XXX isa number from 0 to 255. To broadcast traps to allhosts ...

Page 116 - Once all settings have been defined, select; from the

IV - 34 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide Saving the Configuration Once all settings have been defined, select OK . The settings will be saved and you will be returned to themain OkiNet for TCP/IP screen. Displaying OkiLAN 6020e DiagnosticInformation To view Oki...

Page 117 - Reset Print Server

IV - 35 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide TCP/IP Restoring Factory Default Settings To restore the OkiLAN 6020e to factory defaultsettings, select the OkiLAN 6020e from the list ofavailable print servers. From the Print Server menu bar, select Reset . From the R...

Page 118 - Selecting an Existing View; View

IV - 36 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide Creating Customized Views OkiNet for TCP/IP allows users to create multiplecustomized views for the list of OkiLAN 6020eproducts. By creating different views, the user cannarrow the information displayed to that which is...

Page 120 - Search Filter; to enter these addresses.; Columns; Columns Displayed

IV - 38 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide Search Filter The Search option defines the criteria for identifyingOkiLAN 6020e products on the network. • Search Local Network - This method broadcasts a discovery request to locate all OkiLAN 6020e printservers on the...

Page 121 - Select the first column in the

IV - 39 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide TCP/IP For example, if you currently have three columnsdisplayed and you wish to add a fourth column to thefar left of the screen, follow these steps: 1. Select the first column in the Columns Displayed field. 2. Select ...

Page 122 - IP Address

IV - 40 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide To configure OkiNet for TCP/IP to use the correctcommunity names, select Special Options from the File menu. IP Address This field displays the address of each OkiLAN 6020efor which OkiNet for TCP/IP has defined access. ...

Page 123 - Starting a Telnet Session; telnet; Starting the BOOTP Server; BOOTP Server

IV - 41 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide TCP/IP Configuring the Discovery UDP PortNumber In order to discover OkiLAN 6020e print servers on thenetwork, OkiNet for TCP/IP communicates with theOkiLAN 6020e print servers on a UDP port number.Normally, using this p...

Page 124 - OkiLAN

IV - 42 Section 4 - Chapter 5 - Web Configuration OKI OkiLAN 6020e User’s Guide Chapter 5Web Configuration If the DHCP protocol is enabled as a default, the printserver may be accessed through an ordinary InternetWeb browser, such as Netscape Navigator or MicrosoftInternet Explorer. See Section II, ...

Page 125 - Running a Telnet Session

IV - 43 Section 4 - Chapter 6 - Telnet Configuration OKI OkiLAN 6020e User’s Guide TCP/IP Chapter 6Telnet Configuration Overview The OkiLAN 6020e Configuration utility ( telnet ) provides system, network and printer status informationand allows you to change the configuration of yourOkiLAN 6020e. No...

Page 126 - Enter; . You will be asked to enter your password again.

IV - 44 Section 4 - Chapter 6 - Telnet Configuration OKI OkiLAN 6020e User’s Guide ***************************************** OkiLAN 6020e Configuration Utility 1. Show Network/Printer Information2. Change Password3. Specify Print Server IP Address4. Specify Subnet Mask For Your Network5. Identify De...

Page 127 - Specify Print Server IP Address (Option 3); Remember, when choosing a permanent IP address:

IV - 45 Section 4 - Chapter 6 - Telnet Configuration OKI OkiLAN 6020e User’s Guide TCP/IP Specify Print Server IP Address (Option 3) This option allows you to select the method theOkiLAN 6020e uses to obtain its IP address or to set apermanent IP address. If the OkiLAN 6020e has beenconfigured to us...

Page 128 - Identify Default Gateway IP Address (Option 5)

IV - 46 Section 4 - Chapter 6 - Telnet Configuration OKI OkiLAN 6020e User’s Guide Note: If you select an invalid subnet mask you maynot be able to access the OkiLAN 6020e. Usethis option with care! Identify Default Gateway IP Address (Option 5) If your local network is attached to other networks, y...

Page 129 - Language Switching Sequence; Custom Printer; The latest firmware and utilities are available through:

IV - 47 Section 4 - Chapter 6 - Telnet Configuration OKI OkiLAN 6020e User’s Guide TCP/IP Configure Printer Type This option enables you to indicate the printer type towhich the OkiLAN 6020e is connected. Printer choicesare: 1. Oki Data printer. 2. Custom printer. • Language Switching Sequence - If ...

Page 130 - Restore to Factory Default Configuration (Option 9)

IV - 48 Section 4 - Chapter 6 - Telnet Configuration OKI OkiLAN 6020e User’s Guide Restore to Factory Default Configuration (Option 9) This option automatically restores the OkiLAN 6020eto its original factory defaults. Be aware that when yourestore the OkiLAN 6020e to the original factorydefault se...

Page 131 - Main Status Indicator; Print Configuration Sheet; button, power up the OkiLAN 6020e. Hold the

IV - 49 Section 4 - Appendix A - Troubleshooting OKI OkiLAN 6020e User’s Guide TCP/IP Appendix ATroubleshooting Main Status Indicator Upon power-up, the main status indicator flashesorange. It changes to green when the OkiLAN 6020epasses self-test. The indicator stays orange if theOkiLAN 6020e fails...

Page 132 - Unable to Assign IP Address; ping

IV - 50 Section 4 - Appendix A - Troubleshooting OKI OkiLAN 6020e User’s Guide Unable to Assign IP Address Gleaning If you ping the device and are not getting a response, the glean is not working. Check the following possibleproblems: • Verify the ARP table contains the correct hardware and IP addre...

Page 133 - UNIX BOOTP; • Verify the BOOTP server has reread the “/etc/

IV - 51 Section 4 - Appendix A - Troubleshooting OKI OkiLAN 6020e User’s Guide TCP/IP UNIX BOOTP If you are running UNIX, try the following methodswith the BOOTP server (check the documentation foryour particular UNIX flavor). • Verify the BOOTP server has reread the “/etc/ bootptab” file when the n...

Page 134 - Information

IV - 52 Section 4 - Appendix A - Troubleshooting OKI OkiLAN 6020e User’s Guide Static Route Entry If the OkiLAN 6020e has printed a configuration pageshowing the default address, but it cannot be reachedthrough telnet , check the following: • Display the host’s routing tables with the ‘netstat - r’ ...

Page 135 - Hardware Error Messages; ST: Cable not connected

IV - 53 Section 4 - Appendix A - Troubleshooting OKI OkiLAN 6020e User’s Guide TCP/IP OkiNet for TCP/IP - Winsock Errors • If you see an error before OkiNet for TCP/IP appears on the screen, try setting a host name in the host’s filein the Windows directory (check the documentationfor your Windows T...

Page 136 - Printing a Configuration Page; pinging

IV - 54 Section 4 - Appendix A - Troubleshooting OKI OkiLAN 6020e User’s Guide Printing a Configuration Page If the status indicator turns solid orange due to an errorand no configuration page is printed, your printer maybe configured for PostScript operation. If so, you mustre-configure your printe...

Page 137 - FTP

IV - 55 Section 4 - Appendix A - Troubleshooting OKI OkiLAN 6020e User’s Guide TCP/IP • If the ftp succeeds, there is a problem with the lpr/ lp setup. Verify the hostname or IP address is correctly set for the queue. Try doing an lpstat (System V) or lpq (BSD) to query the status of the OkiLAN 6020...

Page 139 - BOOT; hard coded; Address Formats

IV - 57 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide TCP/IP Assigning the OkiLAN 6020e IPAddress with BOOTP BOOTP is an acronym for BOOT Strap P rotocol. Every TCP/IP network device is required to have aunique 32-bit IP address assigned to it. TCP/IP networkdevic...

Page 140 - ht

IV - 58 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide A name can be arbitrarily assigned to any device on anetwork. The following examples use the nameOKIPRINTER. Remember that this name is arbitrary; acustomer can assign any name they wish. /etc/bootptab: The “/e...

Page 141 - Limitations; OR

IV - 59 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide TCP/IP 4. The bootpd daemon transmits a response to the OkiLAN 6020e with the IP address 192.168.42.55.The OkiLAN 6020e will use this IP address for allsubsequent transmissions. For these steps to work properly...

Page 143 - Configuration Files; rarpd

IV - 61 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide TCP/IP Configuration Files The purpose of RARP is to look up a 32-bit IP addressgiven a 48-bit network hardware address. The RARPserver (which is usually a UNIX workstation running ararpd daemon) performs this ...

Page 145 - OKIPRINTER; telnet OKIPRINTER; yourqueuename; Prerequisites

IV - 63 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide TCP/IP Configuring HP-UX v8.07 for Printingwith the OkiLAN 6020e This application note describes the configuration of theprinting system on the HP-UX ver. 8.07 of the UNIXoperating system. For clarity and brevi...

Page 146 - man inetd; Procedure; sam

IV - 64 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide 2. Make sure the rlp process is not running by typing at the UNIX prompt: ps -e | grep rlp If rlp is not running, you will not see any output afterexecuting this command. If rlp is running (that is, if you see ...

Page 147 - select Add a Network Printer)

IV - 65 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide TCP/IP 3. Select the following options, in order, from the SAM menu: Peripheral Devices ->Printers and Plotters ->Actions -> Add a Remote Printer(Do NOT select Add a Network Printer) A form appears ask...

Page 152 - Do not perform steps 2 through 5 unless; and the IP address; man

IV - 70 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide • yourqueuename - This is the name of the queue on the OkiLAN 6020e and must end with 1, 2, 3or 4, depending on the port selected to service theprint jobs.If FF, LF or NF are the last two letters of thequeue na...

Page 153 - printer 515/tcp spooler; SAM; NOT; Printer name

IV - 71 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide TCP/IP 4. Make sure the following entry is in the “/etc/services” file: printer 515/tcp spooler 5. Start inetd by typing the following at the UNIX prompt: /etc/inetd -c Procedure HP-UX uses an interactive utili...

Page 156 - Remote line

IV - 74 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide Procedure 1. Login to the SCO machine as root. 2. Install Remote Line Printing or verify that it is running by typing mkdev rlp at the UNIX prompt. It will respond by asking if you want to install orremove remo...

Page 157 - - The local queue name on the AIX system to; SMIT

IV - 75 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide TCP/IP IBM’s AIX ver. 3.x for Printing with theOkiLAN 6020e This application note describes the configuration of theprinting system on IBM’s AIX version 3.x of the UNIXoperating system. The following specific n...

Page 159 - Try printing to the printer attached to the OkiLAN

IV - 77 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide TCP/IP 6. Start the qdaemon by typing: AIX> startsrc -s qdaemon 7. Try printing to the printer attached to the OkiLAN 6020e by issuing the following command: AIX> lpr -Plj4 filename Configuring Solaris 2....

Page 160 - The name OKIPRINTER and the IP address; pcl; lpsystem -t bsd OKIPRINTER; Try printing by issuing the following command:

IV - 78 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide Prerequisites Before you proceed, the following prerequisites mustbe met: 1. The name OKIPRINTER and the IP address assigned to the OkiLAN 6020e are in the“/etc/hosts” file on the Solaris system. 2. Make sure t...

Page 162 - Verify that the daemon is running by using the; Try printing by issuing the following command:

IV - 80 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide If the LPD daemon is running, you should see outputsimilar to: root 135 0.0 0.0 52 0 ? IW May 24 0:01/usr/lib/lpd If the LPD daemon is not running, start the daemonby logging into the Sun-OS or Ultrix machine a...

Page 167 - Please note the following system requirements:; Supported Environments

V - 3 Section 5 - Chapter 1 - Introduction OKI OkiLAN 6020e User’s Guide LAN Manager/ Server Chapter 1Introduction Overview This section contains information about the OkiNet forOS/2 utility. This utility allows you to install andconfigure the OkiLAN 6020e for your specificenvironment. The utility p...

Page 168 - Routers

V - 4 Section 5 - Chapter 1 - Introduction OKI OkiLAN 6020e User’s Guide DLC/802.2 Protocol Stack The DLC/802.2 protocol stack must be loaded andrunning on the file server from which the OKI NetworkPrinter Redirector will run. With LAN Manager, thismeans you must enable the remote boot facility. Wit...

Page 170 - • The initial installation requires the file server to be; Installing the Utilities Software; Install

V - 6 Section 5 - Chapter 2 - Installation OKI OkiLAN 6020e User’s Guide • The initial installation requires the file server to be brought down and then back up again. This may be aconsideration when you are planning your install. Depending on your current configuration, the followingsoftware may al...

Page 171 - Running INSTALL; INSTALL; Install Progress; Exit; Completing the Installation; Running OkiNet for OS/2; Network Printing Tools

V - 7 Section 5 - Chapter 2 - Installation OKI OkiLAN 6020e User’s Guide LAN Manager/ Server Running INSTALL 1. Login to the server with administrator privileges. If you are reinstalling the utility, disable the spoolerbefore running install. If this is the first time youhave installed the utility, ...

Page 172 - Configure; Add Local; Local Port Name

V - 8 Section 5 - Chapter 2 - Installation OKI OkiLAN 6020e User’s Guide 3. Select OK . The ESI Print Server Status Screen will display. From the Configure menu, select Add Local Port . 4. Select a print server and port. Print servers are identified by serial number. (Youwill find the serial number ...

Page 173 - Creating an OS/2 Printer; SETUP; Print Manager

V - 9 Section 5 - Chapter 2 - Installation OKI OkiLAN 6020e User’s Guide LAN Manager/ Server Creating an OS/2 Printer To print to the local port created by OkiNet for OS/2,you must create an OS/2 printer. OS/2 1.3 1. Open the Print Manager from the desktop. 2. Select SETUP from the menu. 3. Select P...

Page 174 - from the main Print Server; Configure Print Server; Select the OkiLAN 6020e you would like to test.

V - 10 Section 5 - Chapter 2 - Installation OKI OkiLAN 6020e User’s Guide Printing a Configuration Sheet You can verify communication by printing aconfiguration sheet using OkiNet for OS/2. 1. Select Configure from the main Print Server window. 2. Select Configure Print Server . 3. Select the OkiLAN...

Page 175 - Change the default print queue to the print queue

V - 11 Section 5 - Chapter 3 - Printing in the OS2 Environment OKI OkiLAN 6020e User’s Guide LAN Manager/ Server Chapter 3Printing in the OS/2Environment Overview OS/2 provides several methods for selecting a printerfrom within an application. The best method to usedepends on the specific applicatio...

Page 176 - Select the print queue associated with the OkiLAN; Print Screen; on your keyboard. A copy of

V - 12 Section 5 - Chapter 3 - Printing in the OS2 Environment OKI OkiLAN 6020e User’s Guide 3. Select the print queue associated with the OkiLAN 6020e. OS/2 applications that use the default printer willnow print to the printer attached to the OkiLAN6020e. The OS/2 print screen function uses the OS...

Page 177 - Delete Local Port; Running; Configuring a Print Server

V - 13 Section 5 - Chapter 4 - Additional Utility Features OKI OkiLAN 6020e User’s Guide LAN Manager/ Server Chapter 4Additional Utility Features Overview You can run the OkiNet for OS/2 utility at any time toaccess the following optional features: • Deleting a Local Port• Configuring a Print Server...

Page 178 - Configure Print; Configuring Parallel Port P1; Configuration page print language

V - 14 Section 5 - Chapter 4 - Additional Utility Features OKI OkiLAN 6020e User’s Guide 3. From the Configure menu, select Configure Print Serve r. The following screen will display: The OkiLAN 6020e will reset by selecting OK to save any of the options, except the Print Configuration Sheet option....

Page 179 - Restoring Factory Defaults; Restore Factory Defaults; from the list on the right.; Print; from the list on the right. Click; button. A configuration sheet will print

V - 15 Section 5 - Chapter 4 - Additional Utility Features OKI OkiLAN 6020e User’s Guide LAN Manager/ Server Restoring Factory Defaults The Restore Defaults option restores the factory defaultsettings for the LAN Manager/LAN Server protocoland output ports. To restore factory defaults, select anOkiL...

Page 180 - from the main menu, then; General Help; To access help information about a specific topic, select; Help; from the main menu, then select; Help Index; Context-Sensitive Help

V - 16 Section 5 - Chapter 5 - Using HELP OKI OkiLAN 6020e User’s Guide Chapter 5Using Help Overview The OkiNet for OS/2 utility provides both general andcontext-specific help. General Help To access help information about installation andconfiguration, select Help from the main menu, then select Ge...

Page 181 - No Configuration Sheet; configuration

V - 17 Section 5 - Appendix A - Troubleshooting OKI OkiLAN 6020e User’s Guide LAN Manager/ Server Appendix ATroubleshooting No Configuration Sheet If the LED turns solid orange due to a network protocolerror and no configuration sheet is printed, your printermay be configured for PostScript operatio...

Page 187 - Renaming the OkiLAN 6020e Printer; Note: The options listed on the following pages can; Selecting a Zone; Note: If no Phase 2 router was found, this option will

VI - 5 Section 6 - Chapter 2 - The OkiLAN 6020e Utility OKI OkiLAN 6020e User’s Guide EtherT alk Renaming the OkiLAN 6020e Printer The OkiLAN 6020e Printer Selection window containsa list of all OkiLAN 6020e printers found in theselected zones. OkiLAN 6020e printers are listedalphabetically by name....

Page 188 - Set Type; configuring for a spooler.

VI - 6 Section 6 - Chapter 2 - The OkiLAN 6020e Utility OKI OkiLAN 6020e User’s Guide Print Configuration The Print Configuration option is accessed by selectingPrint Config from the File pull-down menu. Choosethis option to print an OkiLAN 6020e configurationsheet. A configuration sheet will print ...

Page 189 - Enable Port; Note: It is possible to disable all ports but this is not; Reset Board; This option will reset the print server.; Restore Defaults

VI - 7 Section 6 - Chapter 2 - The OkiLAN 6020e Utility OKI OkiLAN 6020e User’s Guide EtherT alk Enable Port This option allows you to enable or disable a port. If aport is disabled, it will appear in the OkiLAN 6020eutility but will not appear in the Chooser. A disabledport cannot be configured. Th...

Page 190 - Before You Call

VI - 8 Section 6 - Appendix A - Troubleshooting OKI OkiLAN 6020e User’s Guide Appendix ATroubleshooting Before You Call This appendix allows you to troubleshoot problems youmay have installing or using the EtherTalk protocol.After trying these suggestions, if you are still havingdifficulty, call Oki...

Page 191 - Unable to Print from a Macintosh

VI - 9 Section 6 - Appendix A - Troubleshooting OKI OkiLAN 6020e User’s Guide EtherT alk Unable to Print from a Macintosh If you are unable to print from a Macintosh via theOkiLAN 6020e, try the following: • Verify the OkiLAN 6020e appears in the Chooser as a LaserWriter device. If the OkiLAN 6020e ...

Page 192 - • Power the printer and the OkiLAN 6020e off and on.; Network Error Messages; • Print a configuration sheet for name and zone

VI - 10 Section 6 - Appendix A - Troubleshooting OKI OkiLAN 6020e User’s Guide If the directory does not print, send the directory again,and watch the OkiLAN 6020e activity indicator. If thestatus indicator flashes to indicate activity, data isreaching the OkiLAN 6020e. Send the document againand wa...

Page 193 - • Compare the zone in which the OkiLAN 6020e; OkiLAN 6020e Utility Errors; Message: AppleTalk network is inaccessible.; Recommended Action: Verify proper router operation.

VI - 11 Section 6 - Appendix A - Troubleshooting OKI OkiLAN 6020e User’s Guide EtherT alk • Compare the zone in which the OkiLAN 6020e appears in the Chooser to the zones searched. Searchthe same zone where the OkiLAN 6020e appears inthe Chooser. OkiLAN 6020e Utility Errors Message: AppleTalk networ...

Page 194 - Message: Option is not available with this product.

VI - 12 Section 6 - Appendix A - Troubleshooting OKI OkiLAN 6020e User’s Guide Message: No OkiLAN 6020e device(s) found. Verify theOkiLAN 6020e is powered on. Recommended Action: Confirm the device is poweredon and the LED is green. Verify correct zone to searchby printing a configuration sheet. Mes...

Page 195 - To Select Your Printer; Click on the Apple in the menu bar and select; Zones; Click on the zone in the AppleTalk Zones box where

VI - 13 Section 6 - Appendix B - Selecting Your Printer OKI OkiLAN 6020e User’s Guide EtherT alk Appendix BSelecting Your Printer To Select Your Printer 1. Click on the Apple in the menu bar and select Chooser. 2. Click on the Print Driver icon. If a caution box appears, click OK. If the Print Drive...

Page 196 - Note: If your printer is the only name listed in the; Capturing

VI - 14 Section 6 - Appendix C - Capturing with a Spooler OKI OkiLAN 6020e User’s Guide 2. Click on the printer name you want to use. Note: If your printer is the only name listed in the box, it still must be selected. Your printer willremain selected until you choose a differentprinter with your Ch...

Page 197 - Releasing; a) Change Type 1 to LaserWriter; Capturing with Bypass

VI - 15 Section 6 - Appendix C - Capturing with a Spooler OKI OkiLAN 6020e User’s Guide EtherT alk Releasing 1. Use the OkiLAN 6020e utility to: a) Change Type 1 to LaserWriter b) Change Type 2 to LaserShared 2. Release the OkiLAN 6020e from the print spooler application. 3. Use the OkiLAN 6020e uti...

Page 199 - Windows Printing

Page 202 - Installation; Start; Ports

VII - 4 Section 7 - Chapter 1 - OkiLAN 6020e Setup for Windows NT OKI OkiLAN 6020e User’s Guide Installation To install OkiLAN 6020e Connect for TCP/IP, followthe instructions below: 1. Install the OkiLAN 6020e Connect for TCP/IP files - see Section I. 2. When installation is complete, click on Star...

Page 204 - Notify When Printed; OkiLAN 6020e Connect for DLC; under the; Notify On Printer Error

VII - 6 Section 7 - Chapter 1 - OkiLAN 6020e Setup for Windows NT OKI OkiLAN 6020e User’s Guide Notify When Printed This feature will provide an alert when your job isactive on the printer. This may be useful if the printer isespecially busy. Description An optional field where you may list the loca...

Page 205 - Open the Windows NT; Control Panel; Properties; Assign the server an IP address (for LANs without

VII - 7 Section 7 - Chapter 1 - OkiLAN 6020e Setup for Windows NT OKI OkiLAN 6020e User’s Guide Windows Printing Notify When Printed This feature will provide an alert when your job isactive on the printer. This may be useful if the printer isespecially busy. Description An optional field where you ...

Page 206 - Install LPR Print Monitor; Services; Assign Print Server IP Address; OkiNet for IP; Add LPR Printer; Printer Ports

VII - 8 Section 7 - Chapter 1 - OkiLAN 6020e Setup for Windows NT OKI OkiLAN 6020e User’s Guide Install LPR Print Monitor 1. Open the Windows NT Control Panel . 2. Select the Services tab. 3. Select Add , then Microsoft TCP/IP printing . 4. Click the Close button. 5. Restart the system. Assign Print...

Page 207 - Name or address of server providing lpd:

VII - 9 Section 7 - Chapter 1 - OkiLAN 6020e Setup for Windows NT OKI OkiLAN 6020e User’s Guide Windows Printing 5. In the Name or address of server providing lpd: field, enter the IP address you assigned to the printer. 6. In the Name of printer or print queue on that server: field, enter the print...

Page 208 - To install OkiLAN 6020e Connect for TCP/IP:; and then; Printers

VII - 10 Section 7 - Chapter 2 - OkiLAN 6020e Setup for Windows 95/98 OKI OkiLAN 6020e User’s Guide Chapter 2OkiLAN 6020e Set Up forWindows 95/98 Overview This section contains instruction and information onhow to set up your OkiLAN 6020e for a Windows 95/98 environment. Print options for Windows 95...

Page 210 - Port Settings; Details

VII - 12 Section 7 - Chapter 2 - OkiLAN 6020e Setup for Windows 95/98 OKI OkiLAN 6020e User’s Guide 8. Click OK . You will now be able to use OkiLAN 6020e Connectfor TCP/IP. Whenever you print to the printerconfigured with OkiLAN 6020e Connect, your printjob will go directly to the OkiLAN 6020e prin...

Page 212 - To configure the OkiLAN 6020e output port, select the; Select the port number you wish to configure.; Configuration Page Language

VII - 14 Section 7 - Chapter 2 - OkiLAN 6020e Setup for Windows 95/98 OKI OkiLAN 6020e User’s Guide Output Port Configuration Options To configure the OkiLAN 6020e output port, select the Output Port tab. Port Number Select the port number you wish to configure. Configuration Page Language Select th...

Page 215 - Chapter 1; OkiView 32 Installation Requirements

VIII - 3 Section 8 - OkiView 32 OKI OkiLAN 6020e User’s Guide OkiView 32 Chapter 1 Introduction The OkiView 32 Utility provides a simple, quick way of viewing thestatus of all brands of network printers on Microsoft/Novellnetworks, as well as configuring and maintaining Oki networkprinters on those ...

Page 216 - OkiView 32 Printer Properties Menu; Printer Properties

VIII - 4 Section 8 - OkiView 32 OKI OkiLAN 6020e User’s Guide Chapter 2 OkiView 32 Printer Panel The Printer Panel is the OkiView 32 main display. The display isdivided into two smaller panels: the Printer Filters Panel and thePrinter Information Panel. The Printer Information Panel, on theright han...

Page 218 - Changing the Printer’s Name and Location

VIII - 6 Section 8 - OkiView 32 OKI OkiLAN 6020e User’s Guide Changing the Printer’s Name and Location 1 Select a printer on the Printer Information Panel. 2 From the Printer menu, click Printer Properties. 3 Change the text in the name and/or location fields. 4 Click OK. OkiView 32 Discovery Prefer...

Page 220 - • While observing the interference, turn the suspect

IX - 2 Section 9 - Regulatory Information OKI OkiLAN 6020e User’s Guide Federal CommunicationsCommission Radio FrequencyInterference Statement This equipment generates and uses radio frequencyenergy. If not installed and used according to themanufacturer ’s instructions, this equipment maycause inte...