Page 2 - Copyright Information; Document Information
OkiLAN 7120e Network User’s Guide Copyright Information - 2 Copyright Information Copyright © 2007 by Oki Data Americas, Inc. All Rights Reserved Document Information OkiLAN 7120e Network User’s GuideP/N 59386201, Revision 1.3February, 2007 Disclaimer Every effort has been made to ensure that the in...
Page 3 - Table of Contents
OkiLAN 7120e Network User’s Guide Table of Contents - 3 Table of Contents Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Specification. . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 5 - OkiLAN 7120e Network User’s Guide; CONFIGURATION; Introduction
OkiLAN 7120e Network User’s Guide 5 CONFIGURATION Introduction The OkiLAN 7120e is a fast 100BASE-TX/10BASE-T network interface card for a range of Oki printers. This user’s guide explains the functionality of the OkiLAN 7120e.Access for interconnection and producing self-diagnostic test and configu...
Page 6 - Specification
OkiLAN 7120e Network User’s Guide 6 Specification Self-diagnostic test With the printer power switched on, press the push-button on the network interface panel (at the rear of the printer) for more than three seconds and release. The self-diagnostic test results and configuration settings are printe...
Page 7 - The printer can not receive data from either the Centronics or; Configuration utility; Available utilities; Utility
OkiLAN 7120e Network User’s Guide 7 From this the Ethernet address is: 00:80:92:12:34:56 Restrictions 1. The printer can not receive data from either the Centronics or the USB interfaces with OkiLAN 7120e installed. To use these remove OkiLAN 7120e. 2. Set "Buffer Print" in the printer menu ...
Page 8 - Using Quick Setup; Set NetWare mode and create Queue/Print Server/Printer objects.
OkiLAN 7120e Network User’s Guide 8 Using Quick Setup Quick Setup utility allows you to configure the OkiLAN 7120e easily and simply without installing any software packages. You can configure the following:> Enable/disable TCP/IP, NetWare, NetBEUI protocols. > Set IP address, Subnet Mask and ...
Page 9 - are transmitted to the network card but the network card is; Using AdminManager
OkiLAN 7120e Network User’s Guide 9 This utility must be used on a PC that is located in the same segment as the printer. To create a NetWare queue, NetWare Client 32 or IntranetWare Client should be installed in your system.The following explanation uses Windows 98 as an example. 1. Insert the CD-R...
Page 10 - Installation; autorun; Interface; File menu; Item
OkiLAN 7120e Network User’s Guide 10 To create a NetWare queue, NetWare Client 32 or IntranetWare Client should be installed on to your system.The following explanation uses Windows 98 as an example. Installation 1. Insert the CD-ROM into the CD-ROM drive. The installation starts automatically. If i...
Page 11 - case sensitive
OkiLAN 7120e Network User’s Guide 11 Status Menu In the [Status] menu, the following items can be selected: Setup Menu In this menu, the following items can be selected: Oki Device Setup Oki Device Setup allows you to configure the print server. Type the root password (default value is the last 6 ch...
Page 12 - General Tab; Location
OkiLAN 7120e Network User’s Guide 12 > NetBEUI > SNMP > SMTP > Maintenance > Printer Port The following section explains each tab’s functionality. Depending on your printer, some items in the following explanation may not be displayed. General Tab This allows you to set or change the ...
Page 13 - Netware Tab; This is where you can configure NetWare related items.
OkiLAN 7120e Network User’s Guide 13 Netware Tab This is where you can configure NetWare related items. WINS Server... Set IP addresses for WINS primary and secondary servers; set scope ID Location Comments Use NetWare Protocol Set NetWare protocol as enabled/disabled. Print Server Name Set Print Se...
Page 14 - NetBEUI Tab; This allows you to configure NetBEUI related items.; SNMP Tab; This allows you to configure SNMP related items.
OkiLAN 7120e Network User’s Guide 14 NetBEUI Tab This allows you to configure NetBEUI related items. SNMP Tab This allows you to configure SNMP related items. Location Comments Use NetBEUI Protocol Set NetBEUI protocol to enabled/disabled. Short Printer Name Set a computer name for the print server....
Page 20 - Maintenance Tab
OkiLAN 7120e Network User’s Guide 20 Maintenance Tab Location Comments Service Use TCPIP Protocol Set TCPIP Protocol, enabled or disabled. Use NetBEUI Protocol Set NetBEUI Protocol, enabled or disabled. Use FTP Service Set FTP service, enabled or disabled. Use TELNET Service Set TELNET service, enab...
Page 21 - Printer Port Tab
OkiLAN 7120e Network User’s Guide 21 Printer Port Tab Location Comments lP Port BOJ String Set an appropriate command sequence to be sent to the connected printer before printing job when data is sent to lp logical printer port.Any alphanumeric and following control characters up to 31 characters ca...
Page 23 - Setup by HTTP; AdminManager asks whether you want to initialise the
OkiLAN 7120e Network User’s Guide 23 Setup by HTTP This selection opens the printer’s web page. Log in to view and change printer and print server settings. You can also view the printer status and perform certain maintenance functions. The username is [root]. The default web password is the last si...
Page 24 - Option Menu; Using a Web browser
OkiLAN 7120e Network User’s Guide 24 Option Menu In the [Option] menu, the following item can be selected: Help Menu In the [Help] menu, [About] is available as well as revision information for AdminManager. Using a Web browser If the OkiLAN 7120e is connected to the network using TCP/IP, its settin...
Page 25 - Web User Name and Password
OkiLAN 7120e Network User’s Guide 25 such as Microsoft Internet Explorer Version 3.0 and higher, or Netscape Navigator version 3.0 and higher. No guarantees are offered for other browsers. Refer to the relevant manuals for details of how to launch and use the browser. Web User Name and Password To a...
Page 26 - Netscape Navigator; d. If you change the window size of the browser; Using SNMP; PrintSuperVision
OkiLAN 7120e Network User’s Guide 26 Netscape Navigator a. Select [Settings] in the [Edit] menu b. Click [Cache] in [Details]. c. Select [Once per session] in [Document in cache is compared to document on network]. d. If you change the window size of the browser i m m e d i a t e l y a f t e r c h a...
Page 27 - System requirement; IIS
OkiLAN 7120e Network User’s Guide 27 PrintSuperVision’s main functions are:> Maintaining the list of printing devices and organising them in logical groups. > Initially discovering and configuring printers connected to the network. > Locating printers visually on maps. > Monitoring devic...
Page 28 - Supported Browsers
OkiLAN 7120e Network User’s Guide 28 Supported Browsers The browsers supported are:> Internet Explorer (IE) 4.01 and above. > Netscape Navigator 4.0 and above. > Opera 5.12 and above. The PrintSuperVision application can be accessed from any Windows, Macintosh, Unix, and Linux desktop that ...
Page 29 - To install the Print SuperVision utility; you can specify a port number for PrintSuperVision (default; Uninstallation
OkiLAN 7120e Network User’s Guide 29 Installation To install the Print SuperVision utility WindowsXP/2000/NT4.0 requires administrator privileges. 1. Insert the CD-ROM into the CD-ROM drive. The Setup Utility starts automatically. If it does not start, double-click Autorun.exe on the CD-ROM. 2. Sele...
Page 30 - Printing utility; Oki LPR
OkiLAN 7120e Network User’s Guide 30 In some cases, an empty [ Okidata/ PrintSuperVision / ] directory may be left behind. Delete the directory manually. Printing utility Oki LPR The Oki LPR Utility is a utility that allows printing data to printers connected to the network via TCP/IP. This utility ...
Page 31 - To install the Oki LPR utility
OkiLAN 7120e Network User’s Guide 31 To install the Oki LPR utility The Oki LPR utility requires that the TCP/IP protocol should be installed into your Windows system. To install the TCP/IP protocol into your Windows system consult your Windows manual. Windows XP/2000/NT4.0 requires administrator pr...
Page 32 - Click [Discover...] to search for the IP address of a suitable; Refer to the On-line Help for information on how to use the utility.; displayed. Deletion of the Oki LPR utility starts.
OkiLAN 7120e Network User’s Guide 32 12. Select [Add Printer] on the [Remote Print] menu. 13. Click [Discover…] to search for the IP address of a suitable printer on your network. Highlight the printer you will use and click [OK]. If your printer is not discovered, click [Cancel] and you can type th...
Page 33 - MICROSOFT WINDOWS; Overview; NetBEUI
OkiLAN 7120e Network User’s Guide 33 MICROSOFT WINDOWS Overview This section provides guidelines on how to print over the network from various Microsoft Windows platforms. There are numerous ways of printing from Windows and the exact set-up will vary depending upon your environment. There are also ...
Page 34 - Installation of TCP/IP Protocol; Windows Version
OkiLAN 7120e Network User’s Guide 34 Installation of TCP/IP Protocol There are a number of options available when printing using TCP/IP for Windows. The following table lists the options: 1 These functions are built into Windows and are displayed as options when using the Add Printer Wizard. Althoug...
Page 35 - the remaining dialogue box prompts.
OkiLAN 7120e Network User’s Guide 35 2. In the [Control Panel] double-click on the [Network] icon. 3. In the [Network] dialogue box click the [Configuration Panel]. 4. If the [Client for Microsoft Networks] is not listed, click the [Add] button. 5. In the [Select Network Component Type] dialogue box...
Page 36 - Windows XP; The Windows XP installation CD-ROM may be required. Follow; Network printer IP address configuration
OkiLAN 7120e Network User’s Guide 36 1. If the TCP/IP protocol is not listed, in the [Local Area Connection Properties] dialogue box, click the [Install] button. 1. In the [Select Network Component Type] dialogue box, select [Protocol] and click the [Add] button. 2. In the [Select Network Protocol] ...
Page 37 - lpr; An IP address
OkiLAN 7120e Network User’s Guide 37 Connect the printer to the network and turn on.Place the CD-ROM in the CD-ROM drive. The set-up utility starts automatically. If the set-up utility does not start, double-click on autorun.exe in the Windows folder of the CD-ROM. Some steps may not display dependi...
Page 38 - Configuring Windows for Network Printing; OkiLPR; NT 4.0 requires administrator privileges.
OkiLAN 7120e Network User’s Guide 38 Consult your network manager to ensure that the NetWare file server is properly installed and working on the network. Make sure that NetWare Client32 or IntranetWare Client is installed on your computer. 10. Click [Next]. 11. On selecting [Yes] you will be asked ...
Page 39 - To install this port, the following needs to be carried out.; In [Name or address of server providing lpd] type the host
OkiLAN 7120e Network User’s Guide 39 OkiLPR Please follow the procedure described in the Windows 95/98/Me section on page 38. Microsoft LPR To install this port, the following needs to be carried out. 1. Select [Start], [Settings], [Control Panel] and then select [Printers]. 2. Select [Add Printer] ...
Page 40 - The Windows NT installation CD-ROM may be required. Follow; OKIL PR; To install this port, the following needs to be carried out:; In [Name or address of server providing LPD] enter the host
OkiLAN 7120e Network User’s Guide 40 5. The Windows NT installation CD-ROM may be required. Follow the remaining dialogue box prompts. Windows 2000 Windows 2000 requires administrator privileges.With Windows 2000, there are four options for printing using TCP/IP.> OkiLPR > Microsoft LPR > P...
Page 41 - the above IP address is entered, the Port Name will default to; IPP
OkiLAN 7120e Network User’s Guide 41 Port 9100 1. Select [Start], [Settings], [Control Panel]. 2. Open the [Printers] folder. 3. Double-click [Add Printer] and then select [Next]. 4. Select [Local Printer], clear the [Automatically detect my printer] check box and then click [Next]. 5. Select [Creat...
Page 42 - Type printer URL in text box labelled [Connect to a printer in; OKI LPR; Microsoft LPR
OkiLAN 7120e Network User’s Guide 42 3. Double-click [Add Printer] and then select [Next]. 4. Select [Network Printer]. 5. Select [Next]. 6. Type printer URL in text box labelled [Connect to a printer in the Internet or your Intranet], e.g. http://192.168.1.31/ipp/ ip ]. 7. Select [Next]. 8. Install...
Page 43 - [Automatically detect and install my Plug and Play printer]
OkiLAN 7120e Network User’s Guide 43 4. Select [Local printer attached to this computer], clear the [Automatically detect and install my Plug and Play printer] check box, and then select [Next]. 5. Select [Create a New Port] and [Type Standard TCP/IP Port]. 6. Select [Next]. 7. The [Welcome to the A...
Page 45 - Select [A network printer, or a printer attached to another; Novell Netware IPX; Network Printer Settings; remains as PrintServer.
OkiLAN 7120e Network User’s Guide 45 4. Select [A network printer, or a printer attached to another computer]. 5. Select [Next]. 6. Select [Connect to a printer on the Internet or on a home or office network] and type printer URL in text box, e.g. http:// 192.168.1.31/ipp/ip. 7. Select [Next]. 8. In...
Page 47 - Right-click the adapter you wish to add NetBEUI to and then
OkiLAN 7120e Network User’s Guide 47 Windows 2000 1. Click the [Start] button, select [Settings] and then click on [Network and Dial-up Connections]. 2. Double-click the [Local Area Connection] icon. In the [Local Area Connection Status] dialogue box, click the [Properties] button. 3. In the [Local ...
Page 48 - Printer driver configuration
OkiLAN 7120e Network User’s Guide 48 Netnbf.inf file and then click [Open]. Now the printer has been configured and NetBEUI has been installed, you can configure Windows to print over the network. Printer driver configuration In the following example, the printer has been configured as follows: 1. S...
Page 50 - NOVELL NETWARE; Supported Versions and Modes
OkiLAN 7120e Network User’s Guide 50 NOVELL NETWARE Overview The OkiLAN 7120e supports the Novell NetWare environment.It is necessary to have NetWare Administrator or Supervisor rights to change the configuration. This guide is for NetWare administrators. It should be read in conjunction with the re...
Page 51 - Setup Utilities; Use; OKI NDPS Gateway
OkiLAN 7120e Network User’s Guide 51 Setup Utilities Use NWAdmin32 or the Pconsole utility to create and setup NetWare printer objects. Please refer to Novell documentation for instructions on how to achieve this.Use the Oki Network Card Setup Utility ( AdminManager ) or other printer manager softwa...
Page 53 - to use the Oki NDPS Gateway. Illustrated here is the Printer; iPrint; Global access to printers.
OkiLAN 7120e Network User’s Guide 53 to use the Oki NDPS Gateway. Illustrated here is the Printer Control screen for the completed printer. iPrint iPrint is included in NetWare 6 and is Novell’s next generation of printing software. It is Novell’s implementation of IPP (Internet Printing Protocol). ...
Page 54 - UNIX; Configuration
OkiLAN 7120e Network User’s Guide 54 UNIX Overview The OkiLAN 7120e supports many protocols such as LPD, FTP, TELNET, SNMP and IPP, and works within the UNIX environment.To use the network card within the UNIX environment, the following steps are required: Configuration Network Interface card settin...
Page 55 - ping; command to confirm the connection with the
OkiLAN 7120e Network User’s Guide 55 3. Use the ping command to confirm the connection with the card. Example: for IP address 192.168.20.127 # ping 192.168.20.127 If there is no reply, there is a problem with the configuration of the IP address (the IP address has already been set manually or dynami...
Page 56 - Logout from the network interface card. Turn the printer off
OkiLAN 7120e Network User’s Guide 56 3 : Subnet Mask: 255.255.255.0 4 : Gateway address: 192.168.20.1 5 : RARP protocol: DISABLE 6 : DHCP/ BOOTP protocol: DISABLE 7 : DNS Server (Pri.): 192.168.1.2 8 : DNS Server (Sec.): 192.168.1.1 9 : root password: “******“ 10 : Domain: ““ 99 : Back to prior menu...
Page 57 - Operating system configuration; Register the IP address of the network card and the host; command to confirm connection with the
OkiLAN 7120e Network User’s Guide 57 Operating system configuration This section explains how to configure a printer for major UNIX operating systems. Sun OS 4.x.x (BSD) configuration The following explanation uses Sun OS 4.1.3 and an ML8810 printer as examples. The absolute path of commands and the...
Page 58 - lp; The spool directory. Give the absolute path.; Create the spool directory and error log file.; lpd; is not running, you can start it by logging in as
OkiLAN 7120e Network User’s Guide 58 :lf=/usr/spool/ML8810_lp/ML8810_lp_errs: ML8810_lp The name of the printer queue lp: The name of the device used to connect to the printer. Does not need to be specified for a remote machine. rm: The name of the host of the remote printer. This should be the same...
Page 59 - Sun Solaris 2.8 configuration; Admintool; Confirm that the IP address of the printer has been set.
OkiLAN 7120e Network User’s Guide 59 Sun Solaris 2.8 configuration Admintool is normally used to register remote printers on Open Windows. However, it cannot be used here, as the data recipient and queue have the same name. The procedure below must be used for registering a remote printer.If Sun Sol...
Page 60 - Register the network card as a remote printer server.; e. Enable the print queue
OkiLAN 7120e Network User’s Guide 60 5. Register the network card as a remote printer server. Example: for host name ML8810 a. Stop the print scheduler. # usr/sbin/lpshut b. Create the printer queue. # /usr/sbin/lpadmin -p ML8810_lp -v /dev/null \ -m netstandard -o dest=ML8810:lp -o protocol=bsd c. ...
Page 61 - Example: for host name ML8810; b. Add the following line to the
OkiLAN 7120e Network User’s Guide 61 HP-UX 10.x configuration If an incorrect IP Address, Subnet Mask or Gateway is entered, the network may go down or other damage may occur. Check the address with the network manager.The following example uses HP-UX10.20 and a ML8810 printer as examples. The absol...
Page 62 - Register the remote printer
OkiLAN 7120e Network User’s Guide 62 c. Restart inetd # /etc/inetd –c 6. Register the remote printer Example: setting up a queue called ML8810_lp to print to host ML8810 d. Register the remote printer. # /usr/sbin/lpadmin -pML8810_lp -v /dev/null -mrmodel \ -ormML8810 -orplp -ocmrcmodel -osmrsmodel ...
Page 63 - network manager should conduct the configuration.; smit
OkiLAN 7120e Network User’s Guide 63 AIX 4.1.5 configuration The following explanation uses AIX4.1.5 and a ML8810 printer as examples. The absolute path of commands and the method of configuring may differ with the OS version. Refer to the workstation’s manual. If an incorrect IP address is entered,...
Page 64 - sjis
OkiLAN 7120e Network User’s Guide 64 # smit mkrque b. Select [remote] (the printer connected to the remote host) from [Type of connection]. c. Select [Standard procedure] from Type of remote print.d. Carry out the following settings in [Add a standard remote print queue]. If the configuration differ...
Page 65 - lpq; lpstat; FTP printing
OkiLAN 7120e Network User’s Guide 65 Example: To delete a print job (Job ID 123) on the ML8810_lp # lprm –PML8810_lp 123 Verify the printer status using the lpq command. > The result of lpq may not be displayed correctly depending on UNIX operating system specification. > While the short forma...
Page 66 - euc; jis; ftp; Move to the preferable logical directory using the; Example: moving to the; Configure the transfer mode
OkiLAN 7120e Network User’s Guide 66 euc must be used for the printing a text file of the EUC Kanji code > jis and euc function only as PostScript printers. > You can not send data to the root directory. 1. Login to the network interface card. When printing with ftp , use any values for name a...
Page 67 - Transfer the print data to the network card using the; Example: transferring print data; Logout from the network card using the; Three states can be verified using the quote command; Example: displaying network card status
OkiLAN 7120e Network User’s Guide 67 Example: changing transfer mode to binary mode and verifying the current mode ftp> type binary 200 Type set to I. ftp> type Using binary mode to transfer files. ftp> 4. Transfer the print data to the network card using the put command. Two methods of fil...
Page 68 - TROUBLESHOOTING; Printer does not print.; Ensure the printer emulation is set to; PS; or; Automati; Flash ROM Check registers
OkiLAN 7120e Network User’s Guide 68 TROUBLESHOOTING The network addresses used in this manual are shown for example only. Network addresses used in your installation must be generated from your own network. Self-diagnostic test Printer does not print. Ensure the printer emulation is set to PS or Au...
Page 69 - Cannot print with; Incorrect User name on the banner page.; NetWare; Computer cannot find the network interface card.
OkiLAN 7120e Network User’s Guide 69 TCP/IP Computer cannot find the network interface card. Turn the printer off and on again.Confirm the network interface is enabled on the printer.Check the network cable is correctly connected. The green LED near the network interface should be lit. Otherwise, ch...
Page 70 - Enable; Reset the network interface card to factory default settings.; Disable
OkiLAN 7120e Network User’s Guide 70 Check the network cable is correctly connected. The green LED near the network interface should be lit. Otherwise, change the cable and try again.If the standard configuration utility is used, check the NetWare network number in the environment settings. If the N...
Page 71 - PostScript error occurs if a Banner Page is printed.; The network interface card is not identified.
OkiLAN 7120e Network User’s Guide 71 PostScript error occurs if a Banner Page is printed. A PostScript Banner page cannot be printed in NetWare 3.12 Remote Printer mode. If a PostScript printer is used and a Banner Page is printed, PostScript error is displayed. Turn the banner output Off in the cli...
Page 72 - Glossary
OkiLAN 7120e Network User’s Guide 72 Glossary NIC Network Interface Card NDS Novell Directory Service NDPS Novell Distributed Print Services iPrint Internet Print IPP Internet Printing Protocol