Oki 58374501 - Manuals

2 3. Install the metal brackets where the breakout panels were. 4. Open the face-up stacker ( ! ), then open the flap and press it onto the stacker surface ( " ). 5. Close the stacker. Step 2: Prepare the Inverter Before assembling the finisher, you must adjust the height of the inverter unit to...

4 5. Pull forward on the extension plate to disengage the pins from the top channel stops, then slide it down into the inverter and push back to engage the pins on the bottom channel stops. 6. Reattach the extension plate using the screws you removed earlier. 7. Turn the inverter around and reinstal...

5 2. Attach the front of the inverter to the stand using two screws on either side. 3. Attach the back of the inverter to the stand using one screw on either side. 4. Attach the guard rail on the inverter stand to the printer using 2 screws. Step 4: Assemble the Finisher 1. Hook the finisher stand o...