Oki 510W - Manuals

6 Configuration Overview C ONFIGURATION O VERVIEW N ETWORK M ODES ___________________ Ad-Hoc Infrastructure

7 Configuration Overview SSID (S ERVICE S ET I DENTIFIER ) _________ In a wireless network, terminals can be assigned an SSID identifier which restricts their access to printers on the network to only those set up for that SSID.For example, computers set up as Accounting can only communicate to a pr...

8 Configuration Overview S ECURITY F EATURES __________________ Open (no security) This can be used, but is not recommended. WEP Wired Equivalent Privacy, assuring wireless network security equivalent to a wired network.Set the same WEP key (64 or 128 bits) for all printers, computers and access poi...

9 Configuration Overview • EAP-TLS requires authentication of the Server Certificate issued by a Certificate Authority and sent from a RADIUS server. • Certificate Authentication requires that the printer have a certificate issued by the Certificate Authority that issued the Server Certificate. • Re...

10 Summary of Configuration Modes S UMMARY OF C ONFIGURATION M ODES A D H OC M ODE _____________________ In this mode, wireless computers communicate with the printer peer-to-peer, gaining access through an SSID you set.Available security features for Ad Hoc Mode: • Open (no security)• WEP Shared Ke...

11 Summary of Configuration Modes You can set up an SSID of your choice for accessing the printer over a wireless network, but no other security can be configured through the control panel.

12 Configuration: Ad Hoc Mode C ONFIGURATION : A D H OC M ODE IP A DDRESS _______________________ For the Wireless Card The IP Address for the wireless card is set automatically. It appears on the wireless card Network Summary printout (see page 4) under TCP/IP Configuration.To set the IP Address ma...

13 Configuration: Ad Hoc Mode 8. Press B ACK . 9. Use the ∇ and ∆ buttons to scroll to [Gateway Address], then use the ∇ and ∆ buttons to set the Gateway Address. Press E NTER . 10. Press O N -L INE to exit the Menu mode. For the Wireless Computer Set the IP Address using Microsoft Windows ® Control...

14 Configuration: Ad Hoc Mode 4. Select PCI Slot2:Wireless, then click [OK]. 5. Click Administrator Login. 6. Enter User ID = root Password = last six digits of the Mac (Ethernet) Address for the wireless card (under General Information on the Network Summary printout–see page 4), minus the punctuat...

15 Configuration: Ad Hoc Mode 9. Click [Wireless LAN] on the left side of the screen. 10. Make your selections:• Network Type = Ad Hoc• Communication Mode = AUTO or 802.11b• Channel = 1 through 13 (to ensure speed and accuracy when using wireless access points which are near each other, be sure to l...

16 Configuration: Ad Hoc Mode Configuration Using AdminManager 1. Launch AdminManager:• From your computer: [Start] → [Programs] → [OKI Setup Utility] → [Admin Manager] • From CD, after AutoRun: [(Language]) → [Next] → [Custom Install] → [Network Software] → [Installation/Config] → [Admin Mgr / Quic...

17 Configuration: Ad Hoc Mode 5. On the [General] tab, click [Change SLOT], then click [Yes]. 6. Referring to the Network Summary printout for the wireless card (under General Information), enter the last six digits of the Mac address as the password (minus any punctuation), then click [OK]. 7. Scro...

18 Configuration: Infrastructure Mode C ONFIGURATION : I NFRASTRUCTURE M ODE IP A DDRESS _______________________ For the Wireless Card The IP Address for the wireless card is set automatically. It appears on the wireless card Network Summary printout (see page 4) under TCP/IP Configuration.To set th...

19 Configuration: Infrastructure Mode 7. Use the ∇ and ∆ buttons to scroll to [Subnet Mask], then use the ∇ and ∆ buttons to set the Subnet Mask values. Press E NTER . 8. Press B ACK . 9. Use the ∇ and ∆ buttons to scroll to [Gateway Address], then use the ∇ and ∆ buttons to set the Gateway Address....

20 Configuration: Infrastructure Mode 2. Enter the IP Address for the wireless card and press the Enter key. 3. Click [Change Slot].

21 Configuration: Infrastructure Mode 4. Select PCI Slot2:Wireless, then click [OK]. 5. Click Administrator Login. 6. Enter User ID = root Password = last six digits of the Mac (Ethernet) Address for the wireless card (under General Information on the Network Summary printout–see page 4), minus the ...

22 Configuration: Infrastructure Mode 9. Click [Wireless LAN] on the left side of the screen. 10. Make your selections:• Network Type = Infrastructure• Communication Mode = AUTO or 802.11b• SSID = (name you select)• Authentication: – Open (no security)

23 Configuration: Infrastructure Mode – Shared Key (WEP) – WPA (Pre-Shared Security)

24 Configuration: Infrastructure Mode – EAP (for more information on setting up EAP security, see “Setting Up EAP Using Web Browser” below). 11. Click [Submit].

25 Configuration: Infrastructure Mode Setting Up EAP Using Web Browser NOTES Certificates must be obtained separately by the network administrator before setting the printer for EAP.These instructions assume you have performed steps 1 through 10 under “Configuration Using Web Browser” , starting on ...

26 Configuration: Infrastructure Mode To Use the Client Certificate 1. Select the Client Certificate setting. Note: Normally the SSL/TLS Certificate should NOT be selected. It is often not authenticated by the RADIUS Server because it does not contain Client Authentication in the Extend Key Usage at...

27 Configuration: Infrastructure Mode 5. Click [OK]. 6. If you wish to add Server Authentication, see the next section. Otherwise, click [Submit]. To Add Server Authentication NOTE To view the certificate, open the EAP Setting window by clicking EAP, then click the newly added [View] button.

28 Configuration: Infrastructure Mode 1. Select [Authenticate Server] under [CA Certificate Setting]. The [Import] button appears. 2. Click [Import]. 3. Fill in (or browse to) the name of the certificate file to be imported, then click [OK]. The certification file is imported. When complete, a resul...

29 Configuration: Infrastructure Mode 5. Click [OK]. 6. Click [Submit]. NOTE To view the certificate, open the EAP Setting window by clicking [EAP], then click the newly added [View] button.

30 Configuration: Infrastructure Mode Configuration Using AdminManager 1. Launch AdminManager:• From your computer: [Start] → [Programs] → [OKI Setup Utility] → [Admin Manager] • From CD, after AutoRun: [(Language]) → [Next] → [Custom Install] → [Network Software] → [Installation/Config] → [Admin Mg...

31 Configuration: Infrastructure Mode 5. On the [General] tab, click [Change SLOT], then click [Yes]. 6. Referring to the Network Summary printout for the wireless card (under General Information), enter the last six digits of the Mac address as the password, then click [OK]. 7. Scroll over to the f...

32 Configuration: Infrastructure Mode – Shared Key (WEP) – WPA (Pre-Shared Security)

33 Configuration: Infrastructure Mode – EAP (for more information on setting up EAP security, see “Setting Up EAP Using Web Browser” below). 9. Click [Initialize].

34 Configuration: Infrastructure Mode Setting Up EAP Using AdminManager NOTES Certificates must be obtained separately by the network administrator before setting the printer for EAP.These instructions assume you have performed steps 1 through 8 under “Configuration Using AdminManager” , starting on...

35 Configuration: Infrastructure Mode To Use a Client Certificate 1. Select EAP under [Authentication], then click [EAP]. 2. Click [Certificate]. 3. Type in the name of the certificate file to be imported, or click [...] to browse to it. 4. Type in the password provided by the issuer of the certific...

36 Configuration: Infrastructure Mode 7. Click [OK]. To Add Server Authentication 1. Under [CA Certificate], type in the name of the certificate file to be imported, or click [...] to browse to it. 2. Click [Import]. 3. Click [OK] to confirm the import. The certification file is imported. When compl...

37 Configuration: Infrastructure Mode 5. Enter the user name to be distributed along with the certificate by the network administrator under [EAP User] and select [Authenticate Server]. then click [OK]. 6. Click [Apply] to save the settings to the wireless card. NOTE To view the certificates, click ...

38 Configuration: Telnet C ONFIGURATION : T ELNET Before starting, have the NEtwork Summary you printed for the wireless card handy: You will need the IP Address and Mac (Ethernet) Address from it to configure the card.The following assumes:• Windows 2000 Professional• IP Address = 111.222.333.444• ...

39 Configuration: Telnet No. M E N U (level.1) Slot2: Wireless IEEE802.11g_____________________________________________ 1: Status / Information 2: Printer Config 3: Network Config 4: Security Config 5: Maintenance 99: Exit Setup Please select(1-99)? 4. Type 3 and hit Enter. No. M E N U (level.2) Slo...

40 Configuration: Telnet 6. To set WEP, type 6 and hit Enter: No. M E N U (level.4) Slot2: Wireless IEEE802.11g_____________________________________________ 1: Key Size : 64 2: Key Index : 1 3: WEP Key 1 : 4: WEP Key 2 : 5: WEP Key 3 : 6: WEP Key 4 : 99: Back to prior menu Please select(1-99)? 7. To...

41 Configuration: Printer Control Panel C ONFIGURATION : P RINTER C ONTROL P ANEL To make changes in the wireless card settings using the control panel: with Ready to Print on the display, press E NTER to switch to the Menu Mode.Use the ∇ , ∆ and E NTER buttons to drill down to the Slot2 menu and ma...

42 Troubleshooting T ROUBLESHOOTING Here is some basic troubleshooting information. For more detailed information, check out http://my.okidata.com. PROBLEM SOLUTION(S) Communication is unstable. Communication speed may be decreased or the wireless connection may be broken due to obstacles or radio s...