Numark CDN 36 - Manuals - manualsarea.com

Page 2 - SAFETY INSTRUCTIONS; CAUTION; FOR USA & CANADIAN MODELS ONLY; other countries use proper plug for local outlet; The Leader in DJ Technology

CDN 36 SAFETY INSTRUCTIONS a) Read Instructions - All the safety and operating instructions should be read before this product is connected and used. b) Retain Instructions - The safety and operating instructions should be kept for future reference. c) Heed Warnings - All warnings on this product an...

Page 3 - THE FOLLOWING ITEMS ARE IN THIS BOX:

CDN 36 ® CDN 36 PROFESSIONAL DUAL CD PLAYER CONGRATULATIONS... You have just purchased a CD player designed specifically for the professional DJ. This unit has been designed to provide CD mixing with ease and creativity that maximizes your skills. Please take a few moments to familiarize yourself wi...

Page 4 - TABLE OF CONTENTS

CDN 36 TABLE OF CONTENTS Safety Instructions 2 Introduction and Registration 3 Set-up & Connections 5 Description of the Features Face Panel 6 Rear Panel 8 Display 9 Basic Operation Play, Pause and Cue Operations 10 Relay Play, Fader Start, Remote Switch Start 11 Looping 12 BPM Counter 15 Matchi...

Page 6 - FRONT PANEL FEATURES

CDN 36 FRONT PANEL FEATURES 1. Open/Close: Press to load or eject the disc. The tray will not open if a disc is in play. The tray door will automatically close in 30 seconds if left open. This is to protect the tray from accidental damage while open. 2. Single: Allows the unit to play back just one ...

Page 8 - REAR PANEL FEATURES

CDN 36 REAR PANEL FEATURES 26. Control Cable Connector- Plug in the 8-pin cable included in here to connect the remote control and main CD unit together 27. IEC Power Plug Connector - Plug your supplied power cord in here. 28. Voltage Selector - Set this switch to the voltage for your location. 29. ...

Page 9 - DISPLAY FEATURES

CDN 36 DISPLAY FEATURES 1. CUE - Flashing when the unit is setting a cue point. Lit continuously when the unit is paused at a cue point. 2. PAUSE ( II )- Active when the unit is paused. 3. PLAY ( > )- Active while the unit is actually playing a CD. 4. TRACK - Shows the track that the unit is play...

Page 10 - DESCRIPTION OF THE PLAY/PAUSE AND CUE OPERATIONS

CDN 36 DESCRIPTION OF THE PLAY/PAUSE AND CUE OPERATIONS PLAY & CUE Pressing the “PLAY/PAUSE” button starts the disc. Pressing the “CUE” button will reset the disc to the last place where the disc was started. This is called the cue point. By alternately pressing the “PLAY/PAUSE” button and the “...

Page 12 - LOOPING OPERATIONS

CDN 36 LOOPING OPERATIONS LOOPING A loop is any area of a CD that you choose to repeat with no breaks. LOOP IN The “LOOP IN” point is where you wish for the loop to start. You will notice the “LOOP IN” button will be lit every time you put in a new CD. This is because the initial “CUE” point of the ...

Page 15 - USING THE BPM DISPLAY FEATURE

CDN 36 USING THE BPM DISPLAY FEATURE Press the BPM button to select the BPM feature on the display on the side of the CD player that you wish to set. Tap the Counter button to the beat of the music. You will see the BPM number appear in the display. The more times you tap the more accurate your numb...

Page 16 - MATCHING BEATS USING PITCH BEND

CDN 36 MATCHING THE BEATS PER MINUTE (BPM) Match the tempo by monitoring the music of both PLAYER 1 and PLAYER 2 by ear or using the manual BPM counter and adjusting the pitch. When the tempo of the music of the selected CD player is slow compared to the tempo of the other player, move the slider to...

Page 17 - EXAMPLE OF MIXING USING TWO CD PLAYERS

CDN 36 EXAMPLE OF MIXING USING TWO CD PLAYERS While playing a disc on PLAYER 1 load a disc into PLAYER 2 and select your next track, match its pitch to the track playing on PLAYER1 and when you are ready use the crossfader on your mixer to fade from PLAYER 1 to PLAYER 2. Load a disc in PLAYER 1 and ...

Page 18 - BEFORE SWITCHING OFF THE POWER; TROUBLESHOOTING; Symptom

CDN 36 BEFORE SWITCHING OFF THE POWER When you have finished using the CD player, be sure that the disc tray is closed with the “OPEN/CLOSE” button before switching off the power. DO NOT switch off the power when the disc holder is open. Switch off the power after the disc holder has been closed wit...

Page 19 - SPECIFICATIONS

CDN 36 SPECIFICATIONS TECHNICAL Disc Type Standard Compact discs (12 cm & 8 cm) Time Display Track Elapsed, Track Remain, or Total remain Quantization 1 bit linear/Channel, 3 Beam Laser Oversampling rate 8 Times Sampling Frequency 44.1 kHz Frequency response 20 Hz to 20 kHz T.H.D. + NOISE Less T...

Page 20 - Professional Disc Jockey Products; LIMITED PRODUCT WARRANTY; RETURN INFORMATION

® Professional Disc Jockey Products LIMITED PRODUCT WARRANTY 1. What is covered and for how long? NUMARK INDUSTRIES LCC ("NUMARK") warrants to the original purchaser that NUMARK'S DJ Mixers, Amplifiers, CD players, turntables, preamplifiers, beatkeepers, equalizers, microphones, headphones, ...