Nissan vehicle - Manuals

1. 3rd row bench center seat belt(P. 1-15) 2. 3rd row bench seat belts (P. 1-15) 3. Top tether strap anchor points (P. 1-30) 4. 2nd row captain’s chair seat belts(P. 1-15) 5. Front seat belts (P. 1-15) 6. Supplemental curtain side-impact airbag (P. 1-51) 7. Supplemental front impact air bags(P. 1-51...

1. Engine hood (P. 3-14) 2. Headlight and turn signal switch(P. 2-19) 3. Replacing bulbs (P. 8-27) 4. Windshield wiper and washer switch(P. 2-17) 5. Windshield (P. 8-17) 6. Power windows (P. 2-38) 7. Door locks, keyfob, keys(P. 3-3, 3-9, 3-2) 8. Mirrors (P. 3-23) 9. Tire pressure (P. 9-11) 10. Flat ...

1. Rear window defroster switch (P. 2-18) 2. Vehicle loading (P. 9-12) 3. Lift gate (P. 3-14) 4. Lift gate release (P. 3-18) 5. Rear view monitor (if so equipped)(P.4-29) 6. Replacing bulbs (P. 8-27) 7. Fuel-filler cap, fuel recommendation(P. 3-19, P. 9-3) 8. Fuel-filler door (P. 3-19) 9. Sliding do...

1. DVD entertainment system(if so equipped) (P. 4-62) 2. Personal lights (P. 2-44) 3. Skyview roof (if so equipped) (P. 2-41) 4. Sunroof (if so equipped) (P. 2-41) 5. Map lights (P. 2-45), Console lightP.2-45) 6. Sun visors (P. 3-22) 7. HomeLink T (if so equipped) (P. 2-46) 8. Glove box (P. 2-31) 9....

1. Ventilators (P. 4-31) 2. Headlight/fog light (if so equipped)/turnsignal switch (P. 2-19) 3. Steering wheel switch for audiocontrol/Bluetooth T hands-free phone system (if so equipped) (P. 4-59) 4. Driver supplemental air bag/horn(P. 1-51, P. 2-25) 5. Meters and gauges (P. 2-3) 6. Cruise control ...

17. Shift selector lever (P. 5-10) 18. Ignition switch (P. 5-8) 19. Tilt steering wheel control (P. 3-21) 20. Rear sonar system off switch (if so equipped) (P. 2-26) 21. Vehicle dynamic control (VDC) off switch (if so equipped) or Traction con-trol system (TCS) off switch(if so equipped) (P. 2-26, P...

1. Power steering fluid reservoir (P. 8-11) 2. Engine oil filler cap (P. 8-8) 3. Air cleaner (P. 8-16) 4. Brake fluid reservoir (P. 8-12) 5. Battery (P. 8-13) 6. Fuse/fusible link box (P. 8-20) 7. Transmission dipstick (P. 8-11) 8. Engine oil dipstick (P. 8-8) 9. Radiator cap (P. 8-7) 10. Drive belt...

Warning light Name Page or Anti-lock brak-ing warninglight 2-8 or Brake warninglight 2-8 Charge warninglight 2-8 Door openwarning light 2-8 Engine oil pres-sure warninglight 2-8 Low fuel warn-ing light 2-9 Warning light Name Page Low tire pres-sure warninglight 2-9 Low windshieldwasher fluidwarning ...

WARNING ● Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. You could also slide under the lap belt and receive serious interna...

belt fit (see “Precautions on seat belt usage” later in this section). Also, the seatback can be re- clined to allow occupants to rest when the ve- hicle is stopped. Seat lifter (if so equipped for driver’s seat) Push the front or rear end of the switch up or down to adjust the angle and height of t...

2ND ROW CAPTAIN’S CHAIR ADJUSTMENTForward and backward WARNING ● The 2nd row seats are heavy. Be careful when folding and unfolding. ● To avoid injury to yourself and others, keep hands and body clear when folding. While seated, pull the lever s 1 and hold it while you slide s 2 the seat forward or ...

● Do not attach anything to the head re- straint stalks. Doing so could impair active head restraint function. The head restraint moves forward utilizing the force that the seatback receives from the occu- pant in a rear-end collision. The movement of the head restraint helps support the occupant’s ...

● If the head restraints are removed for any reason, they should be securely stored to prevent them from causing injury to passengers or damage to the vehicle in case of sudden braking or an accident. ● When returning the seatbacks to the upright position, be certain they are completely secured in t...

Folding To fold the seatback forward, for cargo hauling, lift up on the latch in the center of the seatback to fold the seatback over the seat base. Folding the 3rd row bench seat WARNING ● The 3rd row bench seat is heavy. Be careful when folding and unfolding. ● To avoid injury to yourself or other...

PRECAUTIONS ON SEAT BELT USAGE If you are wearing your seat belt properly ad- justed and you are sitting upright and well back in your seat with both feet on the floor, your chances of being injured or killed in an accident and/or the severity of injury may be greatly reduced. NISSAN strongly encour...

WARNING ● Always route the shoulder belt over your shoulder and across your chest. Never run the belt behind your back, under your arm or across your neck. The belt should be away from your face and neck, but not falling off your shoulder. ● Position the lap belt as low and snug as possible AROUND T...

There are three basic types of child restraint systems: ● Rear facing child restraint ● Front facing child restraint ● Booster seat The proper restraint depends on the child’s size. Generally, infants up to about 1 year and less than 20 pounds (9 kg) should be placed in rear facing child restraints....

have a label certifying that it complies with Fed- eral Motor Vehicle Safety Standards or Canadian Motor Vehicle Safety Standards. Once the child has grown so the shoulder belt is no longer on or near the face and neck, use the shoulder belt without the booster seat. WARNING Never let a child stand ...

● When attaching the rear center seat belt connector, be certain that the seat- backs are completely secured in the latched position and the rear center seat belt connector is completely secured. ● If the rear center seat belt connector and the seatbacks are not secured in the correct position, seri...

SEAT BELT EXTENDERS If, because of body size or driving position, it is not possible to properly fit the lap-shoulder belt and fasten it, an extender is available which is compatible with the installed seat belts. The ex- tender adds approximately 8 inches (200 mm) of length and may be used for eith...

CAUTION Remember that a child restraint left in a closed vehicle can become very hot. Check the seating surface and buckles before placing your child in the child restraint. This vehicle is equipped with a universal child restraint lower anchor system, referred to as the LATCH (Lower Anchors and Tet...

LATCH lower anchor point locations The LATCH system anchors are located at the rear of the seat cushion near the seatback. A label is attached to the seatback to help you locate the LATCH system anchors. WARNING ● Attach LATCH system compatible child restraints only at the locations shown. If a chil...

Installing child restraint LATCH anchor attachments LATCH compatible child restraints include two rigid or webbing-mounted attachments that can be connected to two anchors located at certain seating positions in your vehicle. This system is known as the LATCH system. This system may also be referred...

TOP TETHER STRAP CHILD RESTRAINT If the manufacturer of your child restraint requires the use of a top tether strap, it must be secured to the anchor point. WARNING Child restraint anchor points are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circums...

4. Tighten the tether strap according to the manufacturer’s instructions to remove any slack. For best child restraint fit, see the child restraint installation instructions in this section and the child restraint manufacturer’s instructions. 2nd row captain’s chairs (if so equipped) 1. Top tether s...

CHILD RESTRAINT INSTALLATION USING LATCH-2ND ROW CAPTAIN’S CHAIRS (if so equipped) WARNING ● Attach LATCH system compatible child restraints only at the locations shown. For the LATCH lower anchor locations see “LATCH (Latch Anchors and Tethers for CHildren) system”. If a child restraint is not secu...

PRECAUTIONS ON BOOSTER SEATS WARNING ● Infants and small children should al- ways be placed in an appropriate child restraint while riding in the vehicle. Failure to use a child restraint or booster seat can result in serious injury or death. ● Infants and small children should never be carried on y...

All U.S. states and Canadian provinces or territories require that infants and small children be restrained in an approved child restraint at all times while the vehicle is being operated. The instructions in this section apply to booster seat installation in the rear seats or the front passenger se...

7. If the booster is installed in the front passen- ger seat: When the ignition switch is turned to the ON position, the passenger air bag status light may or may not be illumi- nated, depending on the size of the child and the type of booster seat being used. See “Front passenger air bag and status...

WARNING ● Children may be severely injured or killed when the supplemental front air bags, side air bags or curtain side- impact air bags inflate if they are not properly restrained. Pre-teens and chil- dren should be properly restrained in the rear seat, if possible. ARS1042 ARS1043 ARS1044 1-54 Sa...

9. Seat belt pre-tensioner retractor 10. Satellite sensors 11. Supplemental side air bag modules (if so equipped) 12. SRS curtain side-impact air bag (pas- senger’s side) NISSAN Advanced Air Bag System (front seats) This vehicle is equipped with the NISSAN ad- vanced air bag system for the driver an...

● Work on and around the supplemental front air bag system should be done by a NISSAN dealer. Installation of electri- cal equipment should also be done by a NISSAN dealer. The Supplemental Re- straint System (SRS) wiring should not be modified or disconnected. Unautho- rized electrical test equipme...

1. SRS Front Air Bag Warning Labels 2. SRS Side Air Bag Warning Label (if soequipped) SUPPLEMENTAL AIR BAG WARNING LABELS Warning labels about the supplemental front air bag and supplemental side air bag systems (if so equipped) are placed in the vehicle as shown in the illustration. SUPPLEMENTAL AI...

WARNING If the supplemental air bag warning light is on, it could mean that the supplemental front air bag, supplemental side air bag, curtain side-impact air bag systems and/or pre-tensioner seat belt systems will not operate in an accident. To help avoid injury to yourself or others, have your veh...

Safety—Seats, seat belts and supplemental restraint system 1-67 MEMO

2 Instruments and controls Instrument panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2Meters and gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Speedometer and odometer . . . . . . . . . . . . . . . . . . . . . 2-4Tachometer . . . . . . . . ....

1. Ventilators (P. 4-31) 2. Headlight/fog light (if so equipped)/turnsignal switch (P. 2-19) 3. Steering wheel switch for audiocontrol/Bluetooth T hands-free phone system (if so equipped) (P. 4-59) 4. Driver supplemental air bag/horn(P. 1-51, P. 2-25) 5. Meters and gauges (P. 2-3) 6. Cruise control ...

17. Shift selector lever (P. 5-10) 18. Ignition switch (P. 5-8) 19. Tilt steering wheel control (P. 3-21) 20. Rear sonar system off switch (if so equipped) (P. 2-26) 21. Vehicle dynamic control (VDC) off switch (if so equipped) or Traction con-trol system (TCS) off switch(if so equipped) (P. 2-26, P...

SPEEDOMETER AND ODOMETERSpeedometer The speedometer indicates vehicle speed in miles per hour (MPH) and kilometers per hour (km/h). Odometer/Twin trip odometer The odometer/twin trip odometer is displayed when the ignition key is in the ON position.The odometer records the total distance the ve- hic...

ENGINE COOLANT TEMPERATURE GAUGE The gauge indicates the engine coolant tempera- ture. The engine coolant temperature is within the normal range s 1 when the gauge needle points within the zone shown in the illustration.The engine coolant temperature varies with the outside air temperature and drivi...

The indicates that the fuel-filler door is located on the driver’s side of the vehicle. CAUTION ● If the vehicle runs out of fuel,the malfunction indicator light (MIL) may come on. Refuel as soon as possible. After a few driving trips,the light should turn off. If the light remains on after a few dr...

or Anti-lock braking warning light Seat belt warning light and chime Front passenger air bag status light or Brake warning light Supplemental air bag warning light Security indicator light Charge warning light Automatic transmission position indicator light Slip indicator light Door open warning lig...

The engine oil pressure warning light is notdesigned to indicate a low oil level. Use the dipstick to check the oil level. See “Engine oil” in the “Maintenance and do-it-yourself” section of this manual. CAUTION Running the engine with the engine oil pressure warning light on could cause se- rious d...

Cruise main switch indicator light The light comes on when the cruise control main switch is pushed. The light goes out when the main switch is pushed again. When the cruise main switch indicator light comes on, the cruise control system is operational. Cruise set switch indicator light The light co...

– if possible, reduce the amount of cargo being hauled or towed. The malfunction indicator light may stop blinking and come on steady. Have the vehicle inspected by a NISSAN dealer. You do not need to have your vehicle towed to the dealer. CAUTION Continued vehicle operation without hav- ing the emi...

Vehicle dynamic control off indicator light (if so equipped) This indicator light comes on when the vehicle dynamic control off switch is pushed to OFF. This indicates the vehicle dynamic control system is not operating.Push the vehicle dynamic control off switch again or restart the engine and the ...

brief period. Never leave your keys in the ignition, and always lock the vehicle when unattended. Be aware of your surroundings, and park in secure, well-lit areas whenever possible.Many devices offering additional protection, such as component locks, identification markers, and tracking systems, ar...

SWITCH OPERATION The windshield wiper and washer operates when the ignition switch is in the ON position.Push the lever down to operate the wiper at the following speed: s 1 Intermittent (INT) — intermittent operation can be adjusted by turning the knob toward s A (Slower) or s B (Faster). Also, the...

The rear window wiper and washer operate when the ignition switch is in the ON position.Turn the switch clockwise from the OFF position to operate the wiper. s 1 Intermittent (INT) – intermittent operation (not adjustable) s 2 ON – continuous low speed operation Push the switch forward s 3 to operat...

HEADLIGHT CONTROL SWITCHLighting s 1 When turning the switch to the posi- tion, the front parking, tail, license plate and instrument panel lights come on. s 2 When turning the switch to the posi- tion, the headlights come on and all the other lights remain on. CAUTION Use the headlights with the en...

Be sure you do not put anything on top of the autolight sensor s 1 located on top of the instrument panel. The autolight sensor controls the autolight; if it is covered, the autolight sensor reacts as if it is dark out and the headlights will illuminate. If this occurs while parked with the engine o...

WARNING When the daytime running light system is active, tail lights on your vehicle are not on. It is necessary at dusk to turn on your headlights. Failure to do so could cause an accident injuring yourself and others. INSTRUMENT BRIGHTNESS CONTROL The instrument brightness control operates when th...

TURN SIGNAL SWITCHTurn signal s 1 Move the lever up or down to signal the turning direction. When the turn is com- pleted, the turn signals cancel automatically. Lane change signal s 2 To signal a lane change, move the lever up or down to the point where the indicator light begins to flash, but the ...

CORNERING LIGHT The cornering light provides additional illumina- tion toward the turning direction. The cornering light will illuminate on the turning direction side when a turn is signaled with the headlights on. Push the switch on to warn other drivers when you must stop or park under emergency c...

To sound the horn, push the center pad area of the steering wheel. WARNING Do not disassemble the horn. Doing so could affect proper operation of the supplemental front air bag system. Tam- pering with the supplemental front air bag system may result in serious personal injury. The front seats are w...

The vehicle should be driven with the Traction Con- trol System (TCS) on for most driving conditions.If the vehicle is stuck in mud or snow, the TCS reduces the engine output to reduce wheel spin. The engine speed will be reduced even if the accelerator is depressed to the floor. If maximum engine p...

The rear sonar system can be disabled by push- ing the OFF switch. When the system is disabled, the indicator light on the switch will illuminate.The system will automatically reset the next time the ignition switch is turned on.See “Rear sonar system” in the “Starting and driving” section. The powe...

● Before inserting or disconnecting a plug, be sure the electrical accessory being used is turned OFF. ● Push the plug in as far as it will go. If good contact is not made, the plug may overheat or the internal temperature fuse may open. ● When not in use, be sure to close the cap. Do not allow wate...

CONSOLE BOX (if so equipped) Push the corresponding button s 1 to open the small storage compartments.Slide the console box cover s 2 back to access the large storage compartment. The CD/DVD tray is removable. Pull up on the lever to access the front storage bin on the console box. Below power outle...

CENTER TRAY TABLE (if so equipped) To use the center tray table, raise it up until it locks into the upright position.To access the small storage compartment on the top of the tray table, raise the lid. CAUTION To avoid damaging it, do not apply a total load of more than 50 lbs (23 kg) to the center...

GLOVE BOX Open the glove box by pulling the handle. Use the master key when locking s 1 or unlocking s 2 the glove box. The valet key cannot be used to lock or unlock the glove box. WARNING Keep glove box lid closed while driving to help prevent injury in an accident or a sudden stop. MAP POCKETS LI...

SEATBACK POCKETS The seatback pockets are located on the back of the driver’s and passenger’s seats. The pockets can be used to store maps. GROCERY HOOKS The grocery hooks allow for standard size plastic grocery bags to hang side by side. CAUTION Do not apply a total load of more than 18 lbs (8 kg) ...

OVERHEAD CONSOLE WARNING Keep storage bins closed while driving to help prevent injury in an accident or a sudden stop. Large storage bin Push the button to open the storage bin.Push the lid up to close. Small storage bin Push the button to open the small storage bin.Push the lid up to close. CUP HO...

Front Type B To use the cup holders, raise the center tray table. Refer to “Center tray table” earlier in this section. 2nd row Type A LIC0955 Type B LIC0896 LIC0509 2-34 Instruments and controls Z REVIEW COPY— 2007 Quest (van) Owners Manual—USA_English (nna)02/27/06—debbie X

3rd row Soft bottle holder CAUTION ● Do not use bottle holder for any other objects that could be thrown about in the vehicle and possibly injure people during sudden braking or an accident. ● Do not use bottle holder for open liquid containers. CARGO ORGANIZER (if so equipped) To access the cargo o...

GARMENT HOOK To store garments, pull the garment hook down to the use position. CAUTION Do not apply a total load of more than 55 lbs (25 kg) to the hook. HEAD RESTRAINT STORAGE The storage bag can be used to store up to three head restraints or other items.The bag can be retained on the universal f...

WARNING Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. In a sudden stop or collision, un- secured cargo could cause personal injury. CAUTION Use care when placing or removing items from the roof rack. If you cannot comfort- ably lift the items onto the ro...

Auto-reverse function The auto-reverse function can be activated when a window is closed by automatic operation. Depending on the environment or driving conditions, the auto-reverse function may be activated if an impact or load similar to something being caught in the window oc- curs. WARNING There...

MANUAL VENT WINDOWS (if so equipped) To open a manual vent window, pull the latch handle toward you until it releases.To lock the window in the open position, push the latch handle rearward until it locks.To close a manual vent window, pull the latch handle toward you and push the rear portion of th...

To open or close the sunroof part way, push the switch in any direction s 5 while the roof is sliding open or closed to stop it in the desired position. Tilting the sunroof To tilt the sunroof up, push the tilt switch toward the up position s 1 . When the sunroof is open, it will automatically close...

If the sunroof does not close Have your NISSAN dealer check and repair the sunroof. The lights on demand switch allows the driver to select one of three lighting modes for the interior lights and puddle lamps (if so equipped). The lights on demand switch operates regardless of ignition switch positi...

NOTE:The footwell and door step lights illuminate when the driver and passenger doors are open regardless of the lights on demand switch position. These lights will turn off automatically after 30 minutes while doors are open to prevent the battery from be- coming discharged. CAUTION Do not use for ...

The cargo light on the overhead trim (Type C) has a three-position switch. To operate, push the light.On: The light is illuminatedNormal: The light illuminates when any door is opened or unlocked by the keyfob. The light turns off after 30 seconds or when all doors are closed.Off: The light does not...

The HomeLink T Universal Transceiver provides a convenient way to consolidate the functions of up to three individual hand-held transmitters into one built-in device.HomeLink T Universal Transceiver: ● Will operate most Radio Frequency (RF) devices such as garage doors, gates, home and office lighti...

that was just programmed. This procedure will not affect any other programmed HomeLink T buttons. IF YOUR VEHICLE IS STOLEN If your vehicle is stolen, you should change the codes of any non-rolling code device that has been programmed into HomeLink T . Consult the Owner’s Manual of each device or ca...

3 Pre-driving checks and adjustments Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 Nissan vehicle immobilizer system keys . . . . . . . . . . . 3-2 Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 L...

1. Two master keys (black) with transpon-der chip and chrome NISSAN brandsymbol on one side 2. Valet key (black) with transponder chip 3. Key number plate 4. Transponder chip A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet), not i...

WARNING ● Always have the doors locked while driving. Along with the use of seat belts, this provides greater safety in the event of an accident by helping to prevent persons from being thrown from the vehicle. This also helps keep children and others from unintentionally open- ing the doors, and wi...

LOCKING WITH POWER DOOR LOCK SWITCH To lock all the doors without a key, push the door lock switch (driver’s or front passenger’s side), to the lock position s 1 . When locking the door this way, be certain not to leave the key inside the vehicle.To unlock all the doors without a key, push the door ...

USING THE MAIN ON/OFF SWITCH FOR THE POWER SLIDING DOOR (if so equipped) The main ON/OFF switch is located in the over- head console.Push the switch ON to enable the door pillar switches and the power assist feature. An indica- tor light will illuminate when the switch is in the ON position.Push the...

or close position using the inside or outside handle, the power assist feature will be activated and the door will complete its motion automati- cally. Power Open: The door automatically moves from the fully closed position to the fully open position in ap- proximately 3 – 6 seconds. The power open ...

Clutch Mode: To help prevent unexpected slams due to gravity, the clutch mode is engaged intermittently for approximately 5 – 8 seconds when power open or close is interrupted due to multiple obstacles, low battery voltage or the main ON/OFF switch turned to OFF. The door must then be opened or clos...

CHILD SAFETY SLIDING DOOR LOCK The child safety lock helps prevent the sliding door from being opened accidentally, especially when small children are in the vehicle. The child safety lock levers are located on the edge of the sliding doors. When the lever is in the lock position, thedoor can be ope...

CAUTION Listed below are conditions or occur- rences which will damage the keyfob: ● Do not allow the keyfob to become wet. ● Do not drop the keyfob. ● Do not strike the keyfob sharply against another object. ● Do not place the keyfob for an extended period in an area where temperatures exceed 140°F...

Unlocking doors Push the button on the keyfob once. ● Only the driver’s door unlocks. ● The hazard indicator flashes once if all doors are completely closed with the ignition key in any position except the ON position. ● The interior lights and puddle lamps (if so equipped) turn on and the light tim...

Silencing the horn beep feature If desired, the horn beep feature can be deacti- vated using the keyfob. NOTE: If you use the keyfob to change the hornbeep and lamp flash feature for vehicleswith color screen, the display will not showthe current mode and cannot be used tochange the mode. Use the ke...

s 1 Pull the hood lock release handle located below the driver’s side instrument panel. The hood will spring up slightly. s 2 Push the lever at the front of the hood to the side as illustrated with your fingertips and raise the hood. s 3 Insert the support rod into the slot on the underside of the h...

OPERATING THE POWER LIFT GATE (if so equipped) NOTE: To open, close or reverse the power liftgate, the shift selector lever must be in P(Park) . Also, the power lift gate will notoperate if battery voltage is low. Power Open: The power lift gate automatically moves from the fully closed position to ...

Reverse: The power lift gate will reverse direction immedi- ately during power open or power close if the keyfob, overhead console or rear pillar switch is pressed. A chime will sound to announce the reversal. Auto Reverse: If an obstacle is detected during power open or power close, a warning chime...

CAUTION ● If the power lift gate does not stay open or if the lift gate unexpectedly closes at any time while a continuous warning chime sounds, do not operate the lift gate. There may be a pressure loss in one or both of the lift gate gas stays. Have the lift gate inspected by a NISSAN dealer. ● Do...

Power lift gate (if so equipped) If the lift gate cannot be opened with the door lock switch or keyfob due to a discharged battery, follow these steps: 1. Remove the cover on the inside of the lift gate. 2. Move the lever up to open the lift gate. OPENER OPERATION The fuel-filler door release is loc...

TILT OPERATION Pull the lock lever forward and adjust the steering wheel up or down to the desired position.Push the lock lever back to lock the steering wheel in place. WARNING Do not adjust the steering wheel while driving. You could lose control of your vehicle and cause an accident. The accelera...

s 1 To block glare from the front, swing down the main sun visor. s 2 To block glare from the side, remove the main sun visor from the center mount and swing the visor to the side. s 3 Slide the sun visor in or out as needed. VANITY MIRRORS To access the vanity mirror, pull the sun visor down and fl...

REARVIEW MIRROR (if so equipped) The night position s 1 reduces glare from the headlights of vehicles behind you at night.Use the day position s 2 when driving in daylight hours. WARNING Use the night position only when neces- sary, because it reduces rear view clarity. AUTOMATIC ANTI-GLARE REARVIEW...

OUTSIDE MIRRORS WARNING Objects viewed in the outside mirror on the passenger side are closer than they appear. Be careful when moving to the right. Using only this mirror could cause an accident. Use the inside mirror or glance over your shoulder to properly judge distances to other objects. The ou...

Foldable outside mirrors Push the mirrors backward to fold them. Reverse tilt-down feature (if so equipped) The reverse tilt-down feature will turn the se- lected outside mirror surface downward to pro- vide better rear visibility close to the vehicle.When the ignition switch is in the ON position, ...

4 Display screen, heater, air conditioner, audio and phone systems Control panel buttons — with monochrome screen . . . . 4-2 How to use the TRIP button . . . . . . . . . . . . . . . . . . . . . 4-3How to use the SETTING button . . . . . . . . . . . . . . . . . 4-5 button . . . . . . . . . . . . . ....

WARNING ● Do not disassemble or modify this sys- tem. If you do, it may result in accidents, fire, or electrical shock. ● Do not use this system if you notice any abnormality, such as a frozen screen or lack of sound. Continued use of the system may result in accident, fire or electric shock. ● In c...

Reference symbols:TRIP button — This is a button on the control panel. By pressing this button you can select the item or perform this action. HOW TO USE THE TRIP BUTTON When the TRIP button is pressed, the following modes will display on the screen.Dist. to Empty → Average Speed → Fuel Economy → Ti...

Average speed (MPH or km/h) The Average Speed mode shows the average speed since the last reset. To calculate the aver- age speed, driving distance is divided by driving time.For approximately the first 30 seconds after a reset or reconnecting the battery cables, the display will show (*). Resetting...

1. TRIP button (P. 4-8) 2. BACK (previous) button (P. 4-7) 3. Joystick and ENTER button (P. 4-7) 4. brightness control button (P. 4-16) 5. SETTING button (P. 4-11) If you use the system with the engine notrunning (ignition ON or ACC) for a longtime, it will use up all the battery power,and the engin...

Resetting fuel economy The average fuel economy calculation can be reset to 0. Press the TRIP button repeatedly until the FUEL ECONOMY menu is shown, then ei- ther: ● Select the “Reset” key on screen by press- ing the ENTER button, or ● Press the TRIP button for more than approxi- mately 1.5 seconds...

Resetting the maintenance interval The ENGINE OIL and TIRE ROTATION mainte- nance intervals can be reset to 0 miles (kilome- ters).Select the “Reset” key using the joystick and press the ENTER button. Displaying the maintenance notice re-minder Select the “Display Maintenance Notification” key and p...

Tire pressure information To display tire pressure information, press the TRIP button repeatedly until the MAINTENANCE screen is displayed. Select the “Tire Pressure” key using the joystick and press the ENTER but- ton.Pressure indication in ** psi on the screen indi- cates that the pressure is bein...

Display settings Select the “Display” key and press the ENTER button. The DISPLAY SETTINGS screen will ap- pear. Brightness/contrast/screen background: Select the “Brightness/Contrast/Screen Back- ground” key to adjust the brightness and contrast of the screen. Use the joystick to select and adjust ...

To turn the screen on, ● Press the SETTING button and select the “Display” key and then select the “Display Off” key. Then set the screen to on by press- ing the ENTER button, or ● Hold the button for approximately 2 seconds and the message “resuming dis- play” will appear and the “Display Off” key ...

Vehicle electronic systems Select the “Vehicle Electronic Systems” key by using the joystick and pressing the ENTER but- ton. The VEHICLE ELECTRONIC SYSTEMS screen will be displayed.You can set the following operating conditions by selecting the desired item using the joystick, then pressing the ENT...

Adjust driver seat when exiting vehicle: Se- lect so the driver’s seat automatically moves back and returns to the original position for ease of exit and entry. Remote unlock driver’s door first: Select to change which doors will unlock first during an unlocking operation:Only the driver’s door ←→ A...

You can select the language and unit using the joystick or pressing the ENTER button.The settings are automatically saved when you exit the menu by pressing the BACK button or any other mode button. ClockAdjusting the time: Select the “Hours” or “Minutes” key and move the joystick to the right or le...

1. ROUTE button* 2. DEST button* 3. MAP button* 4. BACK (previous) button (P. 4-18) 5. zoom out button* 6. Joystick and ENTER button (P. 4-17) 7. zoom in button* 8. VOICE button* 9. SETTING button (P. 4-22) 10. brightness control button (P. 4-28) 11. TRIP button (P. 4-18) *For Navigation system cont...

Fuel economy Press the TRIP button to display Average Fuel Economy and Distance To Empty. Average fuel economy (MPG or L/100 km) The Average Fuel Economy is calculated based on fuel consumption since the last reset. The display is updated every 30 seconds and 1/3 mile (500 m). After a reset or conne...

ClockAdjusting the time: Select the “Hours” or “Minutes” key and move the joystick to the right or left to adjust the time.The time will change step by step.The new settings are automatically saved when you exit the setting screen by pressing the BACK button or any other mode button. Setting dayligh...

When the selector lever is shifted into the R (Reverse) position, the monitor display shows view to the rear of the vehicle. WARNING ● The system is designed as an aid to the driver in detecting large stationary ob- jects to help avoid damaging the ve- hicle. The system will not detect small objects...

Adjust air flow direction for the driver and pas- senger side s 1 , center s 2 , and rear passenger s 3 ventilators by moving the ventilator slide and/or ventilator assemblies. WARNING ● The air conditioner cooling function op- erates only when the engine is running. ● Do not leave children or adult...

Air conditioner button Start the engine, turn the fan control dial to the desired position and push the button to turn on the air conditioner. A/C will appear on the display when the air conditioner is operating. To turn off the air conditioner, push the button again, the display will show A/C OFF. ...

● If the engine coolant temperature gauge indicates engine coolant tem- perature over the normal range, turn the air conditioner off. See “If your vehicle overheats” in the “In case of emergency” section of this manual. AIR FLOW CHARTS The following charts show the button and dial positions for MAXI...

1. Driver temperature control dial/AUTObutton 2. A/C ON/OFF button 3. Fan speed control (decrease) 4. Front window defroster button 5. System off button 6. Rear window defroster button 7. Fan speed control (increase) 8. Air recirculation button 9. Passenger temperature control dial/DUAL button 10. A...

The sunload sensor s 1 , located on the top center of the instrument panel, helps the system main- tain a constant temperature. Do not put anything on or around this sensor. Rear seat temperature and fan speed can be controlled from both the front seat overhead con- sole controls s A or the rear sea...

CONTROLSFan control dial The fan control dial turns the rear vent fan on and off, and controls fan speed. Temperature control dial The temperature control dial allows rear passen- gers to adjust the temperature of the outlet air. The air conditioner system in your NISSAN ve- hicle is charged with a ...

AUDIO OPERATION PRECAUTIONS Compact disc (CD) player CAUTION ● Do not force a compact disc into the CD insert slot. This could damage the CD and/or CD changer/player. ● Trying to load a CD with the CD door closed could damage the CD and/or CD changer. ● Only one CD can be loaded into the CD player a...

● If the CD cannot be played, one of the following messages will be displayed. CHECK DISC: ● Confirm that the CD is inserted cor- rectly (the label side is facing up, etc.) . ● Confirm that the CD is not bent or warped and it is free of scratches. PRESS EJECT:This is an error due to excessive tem- p...

Troubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the disc was inserted correctly.Check if the disc is scratched or dirty.Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player.If there is a...

No satellite radio reception is available and “NO SAT” is displayed when the SAT button is pressed unless optional satellite receiver and antenna are installed, and an XM T or SIRIUS™ satellite radio service subscription is active. Sat- ellite radio not available in Alaska, Hawaii and Guam. Audio ma...

The FM stereo indicator ST will glow during FM stereo reception. When the stereo broadcast signal is weak, the radio will automatically change from stereo to monaural reception. TUNE (Tuning Type A only): To manually tune the radio, press the TUNE button or . To move quickly through the channels, ho...

CD CARE AND CLEANING ● Handle a CD by its edges. Do not bend the disc. Never touch the surface of the disc. ● Always place the discs in the storage case when they are not being used. ● To clean a disc, wipe the surface from the center to the outer edge using a clean, soft cloth. Do not wipe the disc...

1. Volume control switch 2. Phone operation switch 3. POWER on and MODE select switch 4. Tuning switch STEERING WHEEL SWITCH FOR AUDIO CONTROL The audio system can be operated using the controls on the steering wheel. POWER on/off switch With the ignition key turned to the ACC or ON position, push t...

1. VOL (volume) control button 2. MODE select button 3. speaker control button 4. NEXT button 5. SEEK button 6. Headphone jacks 7. Infrared headphone transmitter lens* *Red transmitters will be visible wheninfrared headphones are on. REAR AUDIO CONTROLS (if so equipped) Press the REAR CTRL button on...

WARNING ● The DVD Entertainment System is de- signed for rear seat passenger viewing only. ● The driver must not attempt to operate the DVD Entertainment System while the vehicle is in motion so that full at- tention may be given to vehicle operation. CAUTION ● The glass screen on the liquid crystal...

1. EJECT button 2. DVD slot 3. ENTER button 4. POWER on/off button 5. MODE button 6. Input jacks 7. STOP button 8. PLAY/PAUSE button 9. MENU button 10. DISPLAY button 11. NAVIGATION keys DIGITAL VIDEO DISC (DVD) PLAYER CONTROLS Refer to “Playing a digital video disc (DVD)” later in this section for ...

6. DISPLAY button 7. MODE button 8. SUBTITLE button 9. AUDIO button 10. ANGLE button 11. CLEAR button 12. PAUSE button 13. PLAY button 14. FAST FORWARD/FAST REVERSE button 15. MENU button 16. NAVIGATION keys 17. BACK button 18. NUMERIC KEYPAD REMOTE CONTROL Refer to “Playing a digital video disc (DV...

Pressing the button on the front controls turns the rear speakers on and off.It is possible to operate the DVD player by remote control.Headphones are a wireless type and no cables are necessary. You can use them in almost all the ranges in the rear seat. (It is not possible to use the headphones in...

TITLE (Remote control only): Press TITLE button to return the DVD media to the “title” of the DVD.Press TITLE button again to return to the previous stop point and play. BACK (Remote control only): Press the BACK button to exit the current active menu and return to the previous menu. SUBTITLE (Remot...

● Do not attempt to use the system in extreme temperature conditions [below -4°F (-20°C) or above 158°F (70°C)]. ● Do not attempt to operate the system in extreme humidity conditions (less than 10% or more than 75%) . HOW TO HANDLE THE DVD CAUTION ● Handle a DVD by its edges. Never touch the surface...

DVD player operation precautions Do not use the following DVDs as they maycause the DVD player to malfunction: ● 3.1 in (8 cm) discs with an adapter ● DVDs with a region code other than“1”. The region code s A is displayed in a small symbol printed on the top ofthe DVD s B ● DVDs that are not round ...

When installing a CB, ham radio or car phone in your NISSAN, be sure to observe the following precautions, otherwise the new equipment may adversely affect the engine control system and other electronic parts. WARNING ● A cellular telephone should not be used while driving so full attention may be g...

– Your cellular phone is locked to prevent it from being dialed. When the radio wave condition is not ideal or ambient sound is too loud, it may be difficult to hear the other person’s voice during a call.Do not place the cellular phone in an area sur- rounded by metal or far away from the in-vehicl...

● If you need to hear the available commands for the current menu again, say “Help” and the system will repeat them. ● If a command is not recognized, the system announces, “Command not recognized. Please try again.” Repeat the command in a clear voice. ● If you want to go back to the previous com- ...

CONTROL BUTTONS The control buttons for the Bluetooth T Hands- Free Phone System are located on the steering wheel. PHONE/SEND Press the button to initiate a VR session or answer an incoming call. You can also use the button to skip through system feedback and toenter commands during a call. See “Li...

3. Say the number you wish to call s B . For example, 555-1212 can be said as “five five five one two one two.” See “How to say numbers” earlier in this section for more information. 4. When you have finished speaking the phone number, the system repeats it back and an- nounces the available command...

“Phone book” NOTE: Phone book commands are not availablewhen the vehicle is moving. Main Menu “Phone Book” “New Entry” s A “Edit” s B “Delete” s C 9 List Names” s D The Phone Book stores up to 40 names for each phone paired with the system. Each name can have up to 4 locations/phone numbers associ- ...

To delete entries from the phone book, say a name or “All entries” when prompted by the sys- tem.The system acknowledges the command and asks you to confirm the deletion.To delete the current redial number or call back number, say “redial number” or “call back num- ber” when prompted by the system.I...

NOTE: When you delete a phone, the associatedphone book for that phone will also bedeleted. “Select ringtone” s F Use the Select Ringtone command to select the tone heard in the vehicle when an incoming call is received.The system announces the name of the active phone and asks you to choose from th...

5 Starting and driving Precautions when starting and driving. . . . . . . . . . . . . . . . 5-2 Exhaust gas (carbon monoxide) . . . . . . . . . . . . . . . . . . 5-2Three-way catalyst. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2Tire pressure monitoring system (TPMS) (for models wit...

WARNING ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a close...

CAUTION ● Do not use leaded gasoline. Deposits from leaded gasoline will seriously re- duce the three-way catalyst’s ability to help reduce exhaust pollutants. ● Keep your engine tuned up. Malfunc- tions in the ignition, fuel injection, or electrical systems can cause overrich fuel flow into the thr...

TIRE PRESSURE MONITORING SYSTEM (TPMS) (for models with Michelin T PAX T tires only) Each tire, including the spare (if provided), should be checked monthly when cold and in- flated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure la...

CAUTION Do not place metalized film or any metal parts (antenna, etc.) on the windows. This may cause poor reception of the signals from the tire pressure sensors, and the TPMS will not function properly. FCC Notice: Changes or modifications not expressly ap-proved by the party responsible for compl...

WARNING Never remove or turn the key to the LOCK position while driving. The steering wheel will lock. This may cause the driver to lose control of the vehicle and could result in serious vehicle damage or personal injury. AUTOMATIC TRANSMISSION The ignition lock is designed so the key cannot be tur...

KEY POSITIONS LOCK: Normal parking position (0)OFF: (Not used) (1)ACC: (Accessories) (2)This position activates electrical accessories such as the radio when the engine is not running.ON: Normal operating position (3)This position turns on the ignition system and the electrical accessories.START: (4...

1. Apply the parking brake.2. Move the shift selector lever to P (Park) or N (Neutral). P (Park) is recommended. The shift selector lever cannot bemoved out of P (Park) and into any ofthe other gear positions if the ignition key is turned to the OFF position or if the key is removed from the ignitio...

P (Park): Use this selector position when the vehicle is parked or when starting the engine. Make sure the vehicle is completely stopped. The brake pedal must be depressed to move the se-lector lever from the N (Neutral) or anydrive position to P (Park) . Apply the parking brake. When parking on a h...

To push the shift lock release, complete the fol- lowing procedure: 1. Turn the ignition key to the LOCK position and remove the key 2. Apply the parking brake.3. Remove the shift lock release cover as shown. 4. Insert a small screwdriver in the shift lock release slot and push down. 5. Move the shi...

OFF: For driving up and down longslopes where engine braking is nec-essary push the Overdrive switchonce. The O/D OFF indicator lightin the instrument panel comes on atthis time. When cruising at a low speed or climbing a gentle slope, you may feel uncomfortable shift shocks as the transmission shif...

1. ACCEL/RES switch 2. COAST/SET switch 3. CANCEL switch 4. ON·OFF switch PRECAUTIONS ON CRUISE CONTROL ● If the cruise control system malfunctions, it cancels automatically. The SET indicator light in the instrument panel then blinks to warn the driver. ● If the SET indicator light blinks, turn the...

● Accelerate slowly and smoothly. Maintain cruising speeds with a constant accelerator position. ● Drive at moderate speeds on the highway. Driving at high speed lowers fuel economy. ● Avoid unnecessary stopping and braking. Maintain a safe distance behind other ve- hicles. ● Use a proper gear range...

WARNING ● Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. ● Safe parking procedures require that both the parking brake be set and the transmission placed into P (Park) . Fail- ure to do so could cause the vehicle to ...

The power assisted steering uses a hydraulic pump, driven by the engine, to assist steering.If the engine stops or the drive belt breaks, you will still have control of the vehicle. However, much greater steering effort is needed, especially in sharp turns and at low speeds. WARNING If the engine is...

This procedure is described in the vehicle service manual and can be performed by a NISSAN dealer. ANTI-LOCK BRAKING SYSTEM (ABS) The anti-lock braking system controls the brakes so the wheels do not lock when braking abruptly or when braking on slippery surfaces. The system detects the rotation spe...

● If wheels or tires other than the recom- mended ones are used, the vehicle dy- namic control system may not operate properly and the vehicle dynamic con- trol off indicator light may come on. ● The vehicle dynamic control system is not a substitute for winter tires or tire chains on a snow covered...

will sound for only three seconds. Once the sys- tem detects an object approaching, the tone will sound again.The RSS automatically turns on when the gear selector is placed in R (Reverse) and the ignition is ON. The RSS OFF switch on the instrument panel allows the driver to turn the RSS on and off...

6 In case of emergency Flat tire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 Tire pressure monitoring system (TPMS) . . . . . . . . . . 6-2Changing a flat tire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3 Jump starting . . . . . . . . . ...

For vehicles equipped with Michelin T PAX T tires, the vehicle can be driven for a limited time on a flat tire, see 9 Michelin PAX Tires 9 in the 9 Mainte- nance and do-it-yourself 9 section. TIRE PRESSURE MONITORING SYSTEM (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TP...

CHANGING A FLAT TIRE If you have a flat tire, follow the instructions be- low. Stopping the vehicle 1. Safely move the vehicle off the road and away from traffic. 2. Turn on the hazard warning flashers.3. Park on a level surface and apply the parking brake. Shift the transmission into P (Park). 4. T...

Getting the spare tire and tools 1. Tip up the passenger side second row cap- tain’s chair. Refer to “Tip up for easy entry to 3rd row” in the “Safety — seats, seat belts and supplemental restraint system” section of this owner’s manual. 2. Lift up the floor carpeting and remove the jack. 3. Stow th...

Always refer to the proper illustrations for the correct placement and jack-up points for your specific vehicle model and jack type. Carefully read the caution label attached tothe jack body and the following instruc-tions. 1. Loosen each wheel nut one or two turns by turning counterclockwise with t...

To start your engine with a booster battery, the instructions and precautions below must be fol- lowed. WARNING ● If done incorrectly, jump starting can lead to a battery explosion, resulting in severe injury or death. It could also damage your vehicle. ● Explosive hydrogen gas is always present in ...

CAUTION Automatic transmission models cannot be push-started or tow-started. Attempt- ing to do so may cause transmission damage. If your vehicle is overheating (indicated by an extremely high temperature gauge reading), or if you feel a lack of engine power, detect abnormal noise, etc. take the fol...

6. After the engine cools down, check the cool- ant level in the engine coolant reservoir tank with the engine running. Add coolant to the engine coolant reservoir tank if necessary. Have your vehicle repaired at a NISSAN dealer. When towing your vehicle, all State (Provincial in Canada) and local r...

VEHICLE RECOVERY (freeing a stuck vehicle)Front WARNING ● Stand clear of a stuck vehicle. ● Do not spin your tires at high speed. This could cause them to explode and result in serious injury. Parts of your vehicle could also overheat and be damaged. CAUTION ● Tow chains or cables must be attached o...

7 Appearance and care Cleaning exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2Waxing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2Removing sp...

In order to maintain the appearance of your ve- hicle, it is important to take proper care of it.To protect the paint surfaces, please wash your vehicle as soon as you can: ● after a rainfall to prevent possible damage from acid rain. ● after driving on coastal roads. ● when contaminants such as soo...

UNDERBODY In areas where road salt is used in winter, it is necessary to clean the underbody regularly in order to prevent dirt and salt from building up and causing the acceleration of corrosion on the un- derbody and suspension. Before the winter pe- riod and again in the spring, the underseal mus...

Occasionally remove loose dust from the interior trim, plastic parts and seats using a vacuum cleaner or soft bristled brush. Wipe the vinyl and leather surfaces with a clean, soft cloth damp- ened in mild soap solution, then wipe clean with a dry, soft cloth.Regular care and cleaning is required in...

SEAT BELTS The seat belts can be cleaned by wiping them with a sponge dampened in a mild soap solution. Allow the belts to dry completely in the shade before using them. See “Seat belt maintenance” in the “Safety – Seats, seat belts and supplemen- tal restraint system” section of this manual. WARNIN...

Your new NISSAN has been designed to have minimum maintenance requirements with longer service intervals to save you both time and money. However, some day-to-day and regular maintenance is essential to maintain your NIS- SAN’s good mechanical condition, as well as its emission and engine performanc...

When performing any inspection or maintenance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle. The following are general precau- tions which should be closely observed. WARNING ● Park the vehicle on a level surface, ap- ply the parking...

The engine cooling system is filled at the factory with Genuine NISSAN Long Life Antifreeze/Coolant to provide year-round anti- freeze and coolant protection. The anti-freeze solution contains rust and corrosion inhibitors. Additional engine cooling system additives are not necessary. WARNING ● Neve...

CHANGING ENGINE COOLANT A NISSAN dealer can change the engine coolant. The service procedure can be found in the NISSAN Service Manual. Improper servicing can result in reduced heater performance and engine overheat- ing. WARNING ● To avoid the danger of being scalded, never change the coolant when ...

CAUTION Oil level should be checked regularly. Op- erating the engine with an insufficient amount of oil can damage the engine, and such damage is not covered by warranty. CHANGING ENGINE OIL 1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle unti...

7. Refill engine with recommended oil through the oil filler opening, then install the oil filler cap securely.See “Capacities and recommended fuel/lubricants” in the “Technical and con- sumer information” section of this manual for drain and refill capacity.The drain and refill capacity depends on ...

When checking or replacement is required, we recommend your NISSAN dealer for servicing. WARNING ● Use only Genuine NISSAN Matic K ATF. Do not mix with other fluids. ● Using automatic transmission fluid other than Genuine NISSAN Matic K ATF will cause deterioration in drive- ability and automatic tr...

For further brake fluid specification information, refer to “Capacities and recommended fuel/lubricants” in the “Technical and consumer information” section of this manual. WARNING Use only new fluid from a sealed con- tainer. Old, inferior or contaminated fluid may damage the brake system. The use ...

Refill the reservoir more frequently when driving conditions require an increased amount of win- dow washer fluid.Recommended fluid is Genuine NISSAN Wind- shield Washer Concentrate Cleaner & Anti- freeze or equivalent. CAUTION ● Do not substitute engine anti-freeze coolant for window washer sol...

1. Power steering fluid pump 2. Crankshaft 3. Generator 4. Air conditioner WARNING Be sure the ignition key is in the OFF or LOCK position. The engine could rotate unexpectedly. 1. Visually inspect the belt(s) for signs of un- usual wear, cuts, fraying or looseness. If the belt is in poor condition ...

WARNING Be sure the engine and ignition switch are off and that the parking brake is engaged securely. CAUTION Be sure to use the correct socket to re- move the spark plugs. An incorrect socket can damage the spark plugs. If replacement is required, see your NISSAN dealer for assistance. The air cle...

CLEANING If your windshield is not clear after using the windshield washer or if a wiper blade chatters when running, wax or other material may be on the blade or windshield.Clean the outside of the windshield with a washer solution or a mild detergent. Your windshield is clean if beads do not form ...

Rear window wiper blade s 1 Lift the wiper arm away from the rear win- dow. s 2 Push the wiper blade in and pivot until the blade becomes free. s 3 Insert a new blade onto the wiper arm and snap into place. LDI0356 Maintenance and do-it-yourself 8-19 Z REVIEW COPY— 2007 Quest (van) Owners Manual—USA...

Self-adjusting brakes Your vehicle is equipped with self-adjusting brakes.The front and rear disc-type brakes self-adjust every time the brake pedal is applied. WARNING See a NISSAN dealer for a brake system check if the brake pedal height does not return to normal. Brake pad wear indicators The dis...

3. Remove the fuse box cover by pushing the tab and lifting the cover up. 4. Remove the fuse with the fuse puller. The fuse puller is located in the center of the fuse block in the passenger compartment. 5. If the fuse is open s A , replace it with a new fuse s B . 6. If a new fuse also opens, have ...

KEYFOB Replace the battery in the keyfob as follows: s 1 Open the lid using a coin s A . s 2 Remove the battery s B . s 3 Install a new battery s C with the “+” facing down. Recommended battery: CR2025 or equivalent. s 4 Close the lid securely. 5. Press the button, then the button two or three times...

HEADLIGHTS The headlight is a semi-sealed beam type which uses a replaceable headlight (halogen) bulb. If replacement is required, see your NISSAN dealer. CAUTION ● High pressure halogen gas is sealed inside the halogen bulb. The bulb may break if the glass envelope is scratched or the bulb is dropp...

EXTERIOR AND INTERIOR LIGHTS Item Wattage (W) Bulb No. Headlight assembly High 60 HB3/9005 Low* 51 HB4/9006 Park/Turn* 8/29 3457 Cornering* 27 3156 Front fog light 55 H11 Puddle lamp* 8 — Room/map lights 8 PLW 578 Personal lights Type A 8 2GL T2P Type B 8 TS578 Footwell 3.4 158 Glove box light 3.4 1...

1. Room/map light 2. Front personal lights 3. Step light 4. Puddle lamp 5. High-mounted stoplight 6. Cargo light 7. License plate light 8. Rear combination light 9. Headlight assembly 10. Fog light Replacement procedures All other lights are either type A, B, C or D. When replacing a bulb, first rem...

Use a cloth s 1 to protect the housing. Use a cloth s 1 to protect the housing. Step light LDI0341 Cargo light LDI0366 Rear combination light LDI0367 Maintenance and do-it-yourself 8-29 Z REVIEW COPY— 2007 Quest (van) Owners Manual—USA_English (nna)02/27/06—debbie X

If you have a flat tire, see the “In case ofemergency” section of this manual. TIRE PRESSURETire Pressure Monitoring System (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS). It monitors tire pressure of all tires except the spare. When the low tire pressure warning lig...

TIRE LABELING Federal law requires tire manufacturers to place standardized information on the sidewall of all tires. This information iden- tifies and describes the fundamental characteristics of the tire and also pro- vides the tire identification number (TIN) for safety standard certification. Th...

The word 9 radial 9 is shown if the tire has radial structure. s 8 Manufacturer or brand name Manufacturer or brand name is shown. Other Tire-related Terminology In addition to the many terms that are defined throughout this section, Intended Outboard Sidewall is (1) the sidewall that contains a whi...

● Do not drive at speeds above 50 MPH (80 km/h) and do not drive more than 125 miles (200 km) with a punctured Michelin T PAX T tire (if so equipped) . The actual distance the vehicle can be driven on a flat tire depends on outside temperature, vehicle load, road condi- tions and other factors. ● Dr...

CHANGING WHEELS AND TIRESTire rotation NISSAN recommends rotating the tires every 7,500 miles (12,000 km).See “Flat tire” in the “In case of emer- gency” section of this manual for tire re- placing procedures. As soon as possible, tighten the wheel nuts to the specified torque with a torque wrench. ...

● The original tires have built-in tread wear indicators. When the wear indicators are visible, the tire(s) should be replaced. ● Tires degrade with age and use. Have tires, including the spare, over 6 years old checked by a qualified technician because some tire damage may not be ob- vious. Replace...

9 Technical and consumer information Capacities and recommended fuel/lubricants . . . . . . . . . 9-2 Fuel recommendation . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3Engine oil and oil filter recommendation . . . . . . . . . . . 9-5Recommended SAE viscosity number . . . . . . . . . . . ...

The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the proceduredescribed in the “Maintenance and do-it-yourself” section to determine the proper refill capacity. Capacity (Approximate) Recommended Fluids and Lubricants US measure...

FUEL RECOMMENDATION NISSAN recommends the use of unleaded pre- mium gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Research oc- tane number 96). If unleaded premium gasoline is not available you may use unleaded regular gaso- line with an octane rating of at least 87 AK...

ENGINE Model VQ35DE Type Gasoline, 4-cycle, DOHC Cylinder arrangement 6-cylinder, V-block, Slanted at 60° Bore x Stroke in (mm) 3.760 x 3.205 (95.5 x 81.4) Displacement cu in (cm 3 ) 213.5 (3,498) Firing order 1–2–3–4–5–6 Idle speed No adjustment is necessary. A/T (in “N” position)Ignition timing (d...

When planning to drive your NISSAN ve- hicle in another country, you should first find out if the fuel available is suitable for your vehi- cle’s engine.Using fuel with an octane rating that is too low may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline. There- for...

ENGINE SERIAL NUMBER The number is stamped on the engine as shown. F.M.V.S.S./C.M.V.S.S. CERTIFICATION LABEL The Federal/Canadian Motor Vehicle Safety Standard (F.M.V.S.S./C.M.V.S.S.) certification la- bel is affixed as shown. This label contains valu- able vehicle information, such as: Gross Vehicl...

TIRE AND LOADING INFORMATION LABEL The cold tire pressure is shown on the Tire and Loading Information label. The label is located as shown. AIR CONDITIONER SPECIFICATION LABEL The air conditioner specification label is affixed as shown. LTI0084 WTI0167 WTI0165 INSTALLING FRONT LICENSE PLATE Technic...

Use the following steps to mount the front license plate:Before mounting the license plate, confirm that the following parts are enclosed in the plastic bag: ● License plate bracket ● License plate bracket screws x 2 ● License plate screws x 2 ● Screw grommets x 2 1. Make a shallow hole in the bumpe...

weight of occupants and cargo that can be loaded into the vehicle. If the vehicle is used to tow a trailer, the trailer tongue weight must be in- cluded as part of the cargo load. This information is located on the Tire and Loading Information label (if so equipped). ● Cargo capacity - permissible w...

WARNING Overloading or improper loading of a trailer and its cargo can adversely affect vehicle handling, braking and perfor- mance and may lead to accidents. CAUTION ● Do not tow a trailer or haul a heavy load for the first 500 miles (800 km) . Your engine, axle or other parts could be damaged. ● F...

Temperature conditions can also affect towing. For example, towing a heavy trailer in high outside temperatures on graded roads can affect engine performance and cause overheating. The engine protection mode, which helps reduce the chance of engine damage, could activate and automati- cally decrease...

to allow for proper tongue load. Always verify that available capacities are under the required rat- ings. TOWING LOAD/SPECIFICATION TOWING LOAD / SPECIFICATION UNIT: lb (kg) Maximum Towing Load 3,500 (1,587) Maximum Tongue Load 350 (158) Gross Combined Weight Rating 8,500 (3,856) TOWING SAFETYTrail...

Tire pressures ● When towing a trailer, inflate the ve- hicle tires to the recommended cold tire pressure indicated on the Tire and Loading Information label. ● Trailer tire condition, size, load rating and proper inflation pressure should be in accordance with the trailer and tire manufacturer’s sp...

● Be certain your rearview mirrors conform to all federal, state or local regulations. If not, install any mirrors required for towing before driving the vehicle. ● Determine the overall height of the vehicle and trailer so the required clearance is known. Trailer towing tips In order to gain skill ...

● For the first 500 miles (805 km) that you do tow, do not drive over 50 MPH (80 km/h). ● Have your vehicle serviced more often than at intervals specified in the recommended Maintenance Schedule in the “NISSAN Ser- vice and Maintenance Guide”. ● When making a turn, your trailer wheels will be close...

CAUTION ● Failure to follow these guidelines can result in severe transmission damage. ● Whenever flat towing your vehicle, al- ways tow forward, never backward. ● DO NOT tow any automatic transmis- sion vehicle with all four wheels on the ground (flat towing) . Doing so WILL DAMAGE internal transmi...

WARNING The temperature grade for this tire is es- tablished for a tire that is properly inflated and not overloaded. Excessive speed, under-inflation, or excessive loading, ei- ther separately or in combination, can cause heat build-up and possible tire failure. Your NISSAN vehicle is covered by th...

Due to legal requirements in some states and Canadian Provinces, your vehicle may be re- quired to be in what is called the “ready condi- tion” for an Inspection/Maintenance (I/M) test of the emission control system.The vehicle is set to the “ready condition” when it is driven through certain drivin...

Your vehicle is equipped with a variety of comput- ers that monitor and control a number of systems to optimize performance and help service techni- cians with diagnosis and repair. Some of the computers monitor emission control systems, braking systems, engine systems, transmission systems, tire pr...

Insist on the use of genuine NISSAN collision parts! If you want your vehicle to be restored using parts made to NISSAN’s original exacting specifica- tions – if you want to help it to last and hold its resale value, the solution is simple. Tell your insurance agent and your repair shop to only use ...

RECOMMENDED FUEL: NISSAN recommends the use of unleaded pre- mium gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Research oc- tane number 96). If unleaded premium gasoline is not available you may use unleaded regular gasoline with an octane rating of at least 87 AKI nu...

1. Engine oil 8-8 2. Window washer fluid 8-12 3. Engine coolant 8-7 4. Power steering fluid 8-11 5. Meters and gauges 2-3 6. Audio system 4-43; Climate controls 4-31,4-40 7. Spare tire 6-2 8. Fuel-filler door release 3-19; Fuel recom-mendation 9-3 9. Keys 3-2 10. Seat belts 1-1511. Front seats 1-212...