Nissan 350Z - Manual

Mist (MIST) – Lift the lever up for one sweep of the front wipers. Rear Wipers (REAR) – Twist the end section to operate the first (INT) or second (ON) speed settings for the rear wipers. 䡲 The washer function activates the washer fluid and several sweeps of the wipers: ● For FRONT WASHER, pull leve...

RPM SHIFT INDICATOR (manual transmission only) The engine RPM shift indicator light (REV) is located in the tachometer . When driving, it indicates ‘shift point’, or time to up-shift. 䡲 Set or deactivate the engine RPM shift point usingthe trip computer display. 䡲 REV indicator will flash when the e...

CRUISE CONTROL (if so equipped) 䡲 To activate the cruise control, push the ON·OFF switch. The indicator light in the instrument panel willilluminate. 䡲 To set cruising speed, accelerate the vehicle to thedesired speed, push the COAST/SET switch and release it. The SET indicator light in the instrume...

AUTO CLIMATE CONTROL AUTO MODE Turn both the fan speed control dial and the air flow control dial to the AUTO positions . Then turn the temperature control dial to the desired temperature. This will allow the fan speed, air flow distribution and temperature to be automaticallymaintained. TEMPERATURE...

DEFROSTING/DEFOGGING REAR WINDOW AND OUTSIDE HEATED MIRROR Push the rear window defroster switch on. Push the switch again to manually turn the defroster off. This function automatically turns off in approximately 15 minutes. A/C ON/OFF BUTTON Press the A/C button to manually turn the A/C on or off....

FM/AM/XM 姞 RADIO WITH CD CHANGER (if so equipped) 䡲 Press and hold the RPT button for approximately 2 seconds until the clock display starts to flash. 䡲 Press the SEEK/TRACK button to adjust the hours. 䡲 Press the TUNE/REW/FF button to adjust the minutes. 䡲 Press the RPT button again to exit the clo...

TRACTION CONTROL SYSTEM (TCS) OFF SWITCH (if so equipped) The vehicle should be driven with the Traction Control System (TCS) onfor most driving conditions. TCS reduces the engine output to reducewheel spin. The engine speed will be reduced even if the accelerator isdepressed to the floor. If maximu...

SEAT BELT WARNING LIGHT AND CHIME 䡲 The light and chime remind you to fasten your seat belts. The lightilluminates whenever the ignition key is turned to the ON orSTART position and remains illuminated until the driver’s seatbelt is fastened. At the same time, the chime sounds for approxi-mately 6 s...

POWER WINDOWS The power windows operate when the ignition key is in the ONposition, and for about 45 seconds after the ignition key isturned to the OFF position. AUTOMATIC ADJUSTING FUNCTION: The front door power windows have an automatic adjustingfunction. This ensures the windows close completely ...

SOFT TOP OPERATION Before opening or closing your soft top, referto the Owner’s Manual for detailed Warningsand Cautions regarding soft top operation. Open the top: 1. Make sure the area is clear of ob- structions and that there is at least 6feet of clearance above the vehicle. 2. Apply the parking ...

HOMELINK 姞 UNIVERSAL TRANSCEIVER (if so equipped) SYSTEM OPERATING TIPS 䡲 Garage doors, electrical gates, entry doors, etc. will be activated during programming.To avoid injury, make sure that people and objects are clear of all doors or gates duringprogramming. Your vehicle’s engine should be turne...

7. Quickly within 30 seconds of pressing and releasing the garage door opener program button, firmly press and release the HomeLink 姞 button you’ve just pro- grammed. Press and release the HomeLink 姞 button up to three times to complete the training. 8. Your HomeLink 姞 button should now be programme...

7. Say “Store” when you are finished entering numbers. The system confirms the name, location, and number. 8. Say “Yes” or “No” when the system asks if you would like to store another location for the same name. If you do not respond to the system prompt, the system ends the NewEntry session. MAKING...

BASIC FUNCTIONSSTART-UP SCREEN 䡲 Read the precautions carefully, highlight the“OK” key using the joystick and press the ENTER button. NAVIGATION DISPLAY SCREEN 䡲 Displays navigation features and map. DISABLED WHILE DRIVING 䡲 Not all features can be manually operatedwhile the vehicle is in motion. Th...

䡲 Moving the joystick right or left, adjust yourhome location if necessary. After adjusting thelocation, press the ENTER button. 䡲 Your home is displayed at the center of themap. A confirmation message is displayed,and the system sets your home as the destina-tion. 䡲 Press the MAP button to return t...

䡲 The selected destination is displayed at thecenter of the map. Highlight the “OK” key andpress the ENTER button after confirming the location of the displayed destination. The sys-tem sets the destination to the selected loca-tion and starts calculating a route. SETTING A PLACE AS A DESTINATION 䡲 ...

䡲 The selected destination is displayed at thecenter of the map. Highlight the “OK” key afterconfirming the location of the displayed desti-nation, and press the ENTER button. The sys- tem sets the destination to the selected loca-tion and starts calculating a route. BEGINNING ROUTE GUIDANCE After s...

SHIFT _ Nissan, the Nissan Brand Symbol, ⬙ SHIFT_ ⬙ tagline, Z and Nissan model names are Nissan trademarks. © 2007 Nissan North America, Inc.QR8E-0Z33U0 Printing: August 2007 (13)