Nissan VQ35DE - Manual
Nissan VQ35DE – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 5 – You should torque; I recommend the
- Page 6 – Torque the 17mm bolts to 45ft lbs. Torque the; You should go ahead and install your starter
- Page 9 – Slide the 14mm bolt into the transmission
- Page 13 – Once you get the bolts in, go ahead and
Forced Induction Racing
VQ35DE Install Kit Instructions
2002+ Nissan SE-R Spec-V (W/6spd)
Revised Date: 2/16/06
Thank you for purchasing our VQ35DE install kit. We have spent
numerous hours, designing, and perfecting this kit, over the past 8
months. The end result, is a user-friendly, easy to work with kit, that
will allow you to “bolt-in” a VQ35DE engine and 6 speed
transmission.
Recommended Tools:
Metric/Standard socket sets (3/8 and 1/2)
Torque wrench and Pry-Bar
Metric/Standard wrenches
Jack and jack stands
Eye/Ear and Respiratory protection
Disc Grinder and extension cord
Engine hoist and chain
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Factory Service Manual. If you need the manual for this particular application, it will be saved in a separate folder on this installation CD. Here is a picture, showing the difference between the QR and VQ 6 speed bell-housings: The VQ bell-housing is shown on the left side, with the QR internals a...
use of a high quality clutch alignment tool. This will make the next step a lot easier. Grab a buddy, and have him/her help you lift the transmission up a few inches. Slide the input shaft into the clutch disc splines. The transmission should slide onto the two dowel pins that line it up perfectly w...
needed. Torque the stud/nut and bolt/lock washer on the holes marked “B” to 45ft lbs. Remember, it is VERY important that you tighten those bolts in the sequence listed above. Otherwise, you will not be able to tighten the 17mm VQ engine bracket that is behind the 3/8” bolt for the QR mount! Once yo...
