Nissan 2010 Versa - Manual

● If you notice any foreign objects inthe system hardware, spill liquid onthe system or notice smoke or asmell coming from it, stop using thesystem immediately and contact aNISSAN dealer. Ignoring such condi-tions may lead to accidents, fire orelectrical shock. CAUTION ● Do not use this system if yo...

2 Getting started Control buttons and functions. . . . . . . . . . . . . . . . . . . . . . . 2-2 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2Steering wheel switch. . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Basic operation . . . . . . . . . . . ....

CONTROL PANEL 䊐 1 button: Press to change the display brightness be-tween day and night modes. While themode is being displayed, the brightness canbe adjusted using the scroll knob. Press and hold to turn the display off. Pressagain to turn the display on. “Display settings” (page 5-3) 䊐 2 Touch scr...

STEERING WHEEL SWITCH The volume control buttons on the steeringwheel 䊐 1 can be used to control the volume level of the voice guidance given by the Naviga-tion System. Press the + button to increase thevolume or the – button to decrease the volumewhile the voice guidance is speaking. If the vol-ume...

Examples of touch screen operation Selecting an item: When any item is touched, the next screen isdisplayed. Adjusting: Touch the “+”, “-”, “>” or “<” key to adjust asetting. Scrolling through a message or list: Touch the (up) or (down) keys on the screen repeatedly to scroll through a mes-sag...

3 Map settings Map types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 2-Dimensional (2D) view . . . . . . . . . . . . . . . . . . . . . . . . 3-23-Dimensional (3D) view . . . . . . . . . . . . . . . . . . . . . . . . 3-2Screen information (2D or 3D) . . . . . ....

2-DIMENSIONAL (2D) VIEW The 2D map is a two-dimensional (flat) repre-sentation of the map data, similar to a road map,focused on the vehicle’s position (vehicle icon) . “Screen information (2D or 3D)”(page 3-3) “Map settings for the map screen”(page 3-7) 3-DIMENSIONAL (3D) VIEW The 3D map displays t...

䊐 10 Vehicle icon Indicates the current location and directionof the vehicle. 䊐 11 Current road indicator The location of where the car is positioned. 䊐 12 “Menu” key When touching this key, the items “StoreCurrent Position”, “Show Position/GPSInformation”, “Show Destination Informa-tion” or “Map Se...

The Map Options menu allows you to quicklystore the current position, show position infor-mation or destination information, and adjust themap settings. 1. Touch the “Menu” key while the route guid- ance map is displayed. 2. The following options are available for se- lection: ● Store Current Locati...

2D view 3D view 2.5 mi (5 km) — 5 mi (10 km) — 10 mi (20 km) — 25 mi (50 km) — 50 mi (100 km) — 100 mi (200 km) — 250 mi (500 km) — Icons of various categories of locations can bedisplayed on the map. MAP SYMBOLS This navigation system uses symbols to displayvarious types of facilities. The followin...

● Show Places on Map Touch the “Show Places on Map” key to ac-tivate or deactivate the display of placeicons on the map. When the icon on themap is touched, place information will bedisplayed. ● Show Incidents Touch the “Show Incidents” key to enabletraffic incident information on the mapscreen. “Tr...

● Do not store the SD-card in locationsexposed to direct sunlight, or in hightemperatures or humidity. ● Always place the SD-card in its stor-age case when not in use. SD-CARD REPLACEMENT For additional SD-cards with map data, contactthe Nissan Navigation Helpdesk. HOW TO ORDER MAP DATA UP-DATES To ...

– In order to avoid a traffic accident, operate the system only when thevehicle is stopped at a safe placeand the parking brake is on. – In order to avoid a traffic accident or traffic offence, remember thatactual road conditions and trafficregulations take precedence overthe information contained o...

4 Navigation About route guidance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Voice guidance during route guidance . . . . . . . . . . . . 4-2 Navigation screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Basic operation . . . . . . . . . . . . . . . . ....

After setting the destination, select “Start” to be-gin route guidance. During route guidance, the system navigates youthrough the guide points using visual and voiceguidance. CAUTION ● The navigation system visual andvoice guidance is for reference pur-poses only. The contents of the guid-ance may ...

Several methods are available to set yourdestination. BASIC OPERATION 1. Press the NAV button. 2. Select the appropriate destination setting method by touching the screen or scrollingwith the scrolling dial. AVAILABLE SETTING ITEMS ● DESTINATION: Set and/or save a destination. Several methods are av...

● ROUTE A route list is available. If you touch “Route”, a list is shown. By touching a part of the route, you can seemore detailed information. ● CANCEL ROUTE Touch “Cancel Route” to cancel the routeguidance. NOTE: If route guidance is not active, both“Route” and “Cancel Route” cannot beoperated. R...

● Route Type: Set to “Fastest” to calculate the fastestroute. Set to “Economy” to calculate themost economical route. Set to “Shortest” tocalculate the route of shortest distance. ● Minimize Freeways: Toggle on or off to minimize the use of free-ways on a calculated route. ● Minimize Toll & Ferr...

4. A pop-up is displayed to confirm that you want to delete all User POIs (My Places)from the system. Touch “Yes” to delete theUser POIs or “No” to cancel. This method allows you to search for a destina-tion by scrolling the map, then have the systemcalculate a route to the destination or store thep...

12. Touch “Start”. The route to the intersection will becalculated. The Navigation System receives traffic informa-tion from XM NavTraffic 姞 to inform you of traffic events and guide you to an alternate route. Traf-fic events include accidents, road construction,heavy traffic and other factors that ...

Touch the “Avoid Road Ahead” key to avoid theroad listed on the traffic event. You can choosethe distance over which the system avoids theaffected road. Touch the “+” or “-” key to set thedistance and then touch “Recalculate Route” tocalculate the new route. Touch the “Avoid Segment of Route List” k...

5 Other settings System settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Touch clicks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2Beep tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2Reset settings. . . ....

The system can be customized according toyour preference. 1. Press the SETUP button. 2. Touch “System”. 3. Select the preferred setting item on the screen and the next screen will be shown.You may need to use the scrolling dial or thetouch screen to scroll if more than onescreen of options is availa...

DISPLAY Switching the display on or off This setting allows you to turn the display on oroff. When the display is turned off, the clock willstill be displayed. To turn off the display, press and hold thebutton for more than 2 seconds. The display will switch on when: ● the button is pressed. ● any o...

This setting allows you to make clock adjustments. 1. Press the SETUP button. 2. Touch the “System” key. 3. Touch the “Clock” key. 4. Select the preferred setting item and make an adjustment. ● “Time Format”: Touch the “Time Format” key to change theclock format between 12-hour and 24-hour. ● “Use G...

SET CLOCK Adjust the hour or minute using the “+” and “–”keys to adjust the hour or minute up or down. This setting allows you to change the languageused by the system. 1. Press the SETUP button. 2. Touch the “System” key. 3. Touch the “Language” key. 4. Select the appropriate language. The avail- a...

6 General system information Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2Features of this navigation system . . . . . . . . . . . . . . . . . . . 6-2 Route guidance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2Places directory . . . ....

This system is primarily designed to help youreach your destination, and it performs otherfunctions as outlined in this manual. However thedriver must use the system safely and properly.Information concerning road conditions, trafficsigns and the availability of services may not al-ways be up-to-dat...

DISPLAY OF CURRENT VEHICLELOCATION This navigation system combines the data ob-tained from the vehicle (by gyro sensor) and fromGPS (Global Positioning System) satellites tocalculate the current location of the vehicle. Thisposition is then displayed throughout route guid-ance to a destination. WHAT...

BASICS OF VOICE GUIDANCE The voice guidance announces which directionto follow when approaching an intersectionwhere a turn is required. After setting the route, select “Start” to beginroute guidance. During route guidance, the system navigates youthrough the guide points using visual and voiceguida...

● When the vehicle has deviated from the sug-gested route, voice guidance is not available.The system will not announce this to you. Re-fer to the map and recalculate the route. ● Voice guidance may not accurately corre-spond with road numbers and directions atfreeway junctions. ● Voice guidance may...

MAINTENANCE OF THE DISPLAY CAUTION ● To clean the display, never use arough cloth, alcohol, benzine, thinner, any kind of solvent, or papertissues with chemical cleaning agent. They would scratch or deterio-rate the panel. ● Do not splash any liquid such as wa-ter or car fragrance on the display.Con...

7 Troubleshooting guide Basic operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2Vehicle icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3 Map SD-card route calculation and visual guidance . . . 7-5Voice guidance . . . . . . . . . ....

Symptom Possible cause Possible solution No image is displayed. The brightness is at the lowest setting. Adjust the brightness of the display. The display is turned off. Press the button to turn on the display. The system is in overheat mode due to excessivehigh temperature. Wait until the system co...

Symptom Possible cause Possible solution Names of roads and locations differ between 2Dand 3D mode. This is because the quantity of the displayed information isreduced so that the screen does not become difficult to read.There is also a chance that names of the roads or locationsmay be displayed sev...

Symptom Possible cause Possible solution Voice guidance is not available. In some cases, voice guidance is not available even when thevehicle should make a turn. This is not a malfunction. The vehicle has deviated from the suggested route. Go back to the suggested route or request route calculationa...

8 Index A Address book . . . . . . . . . . . . . . . . . . .6-3 B Basic operations . . . . . . . . . . . . . . . . .7-2Basics of voice guidance . . . . . . . . . . . .6-6 C Clock settings . . . . . . . . . . . . . . . . . .5-4Control buttons and functions . . . . . . . . . .2-2Current vehicle locati...

® 2010 NAVIGATION SYSTEM OWNER’S MANUAL For your safety, read carefully and keep in this vehicle. Printing: November 2009 Publication No.: N10E-LCNXU0 Printed in U.S.A. LCN-D