Nissan 2006 Altima - Manuals

1. Top tether strap anchor (P. 1-25) 2. Rear seat belts (P. 1-9) 3. Supplemental curtain side-impact airbags (P. 1-34) 4. Supplemental side impact air bags(P. 1-34) 5. Front head restraint (P. 1-7, P. 1-8) 6. Front seat belts (P. 1-9) 7. Supplemental front impact air bags(P. 1-34) 8. Seats (P. 1-2) ...

1. Engine hood (P. 3-9) 2. Headlight and turn signal switch(P. 2-21) 3. Replacing bulbs (P. 8-31) 4. Windshield wiper and washer switch(P. 2-19) 5. Windshield (P. 8-25) 6. Power windows (P. 2-37) 7. Door locks, keyfob, keys(P. 3-3, 3-5, 3-2) 8. Mirrors (P. 3-15) 9. Tire pressure (P. 8-40) 10. Flat t...

1. Rear window defroster switch (P. 2-20) 2. Trunk lid (P. 3-10) 3. Vehicle loading (P.9-12) 4. Interior trunk lid release (P. 3-11) 5. Replacing bulbs (P. 8-31) 6. Fuel-filler cap, fuel recommendation(P. 3-12, P. 9-3) 7. Fuel-filler door (P. 3-12) 8. Child safety locks (P. 3-5) LII0023 EXTERIOR REA...

1. Glove box (P. 2-33) 2. Automatic anti-glare inside mirror(if so equipped) (P. 3-15) 3. Sun visors (P. 3-14) 4. Interior lights, illuminated entry (P. 2-40) 5. Front seat (P. 1-2) 6. Sunroof (if so equipped) (P. 2-39) 7. Interior trunk access (P. 1-6) 8. Rear seat (P. 1-6) 9. Front console (P. 2-3...

1. Driver, center and passenger ventila-tors (P. 4-11) 2. Headlight/fog light (if so equipped)/turnsignal switch (P. 2-21) 3. Steering wheel switch for audio control(if so equipped) (P. 4-40) 4. Driver supplemental air bag/horn(P. 1-34, 2-26) 5. Meters and gauges (P. 2-3) 6. Cruise control main/set ...

17 Front passenger air bag status light(P. 1-43) 18. Audio system controls (if so equipped) (P. 4-23) 19. Ignition switch (P. 5-4) 20. Tilt/telescopic steering wheel controls (P. 3-13) 21. Traction control system (TCS) off switch (if so equipped) (P. 2-28) 22. Instrument brightness control (P. 2-24)...

QR25DE engine 1. Power steering fluid reservoir (P. 8-16) 2. Spark plug caps (P. 8-21) 3. Brake fluid reservoir (P. 8-17) 4. Clutch fluid reservoir (M/T model)(P. 8-17) 5. Air cleaner (P. 8-22) 6. Battery (P. 8-18) 7. Fuse/fusible link box (P. 8-27) 8. Transmission dipstick (A/T models)(P. 8-14) 9. ...

Warning light Name Page or Anti-lock brakewarning light (if soequipped) 2-11 Automatic transmis-sion check warninglight (if so equipped) 2-12 or Brake warning light 2-12 Charge warninglight 2-12 Door open warninglight 2-12 Engine oil pressurewarning light 2-12 Low fuel warninglight 2-13 Warning ligh...

WARNING ● Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. You could also slide under the lap belt and receive serious interna...

Forward and backward Pull the lever up and hold it while you slide the seat forward or backward to the desired position. Release the lever to lock the seat in position. Reclining To recline the seatback, pull the lever up and lean back. To bring the seatback forward, pull the lever up and lean your ...

Seat lifter (if so equipped for driver’s seat) Turn either dial to adjust the angle and height of the seat cushion to the desired position. FRONT POWER SEAT ADJUSTMENT (if so equipped for driver’s seat) WARNING ● Do not adjust the driver’s seat while driving so full attention may be given to vehicle...

To fold down the driver side of the rear seat, reach through the opening and pull on the strap s 1 located behind the seat.The rear seats can be locked using the master key to prevent unauthorized access. The valet key cannot be used to lock or unlock the release button. For more information on keys...

Adjust the head restraint so the center is level with the center of your ears. ACTIVE HEAD RESTRAINT (front seats) WARNING ● Always adjust the head restraints prop- erly as specified in the previous section. Failure to do so can reduce the effec- tiveness of the active head restraint. ● Active head ...

PRECAUTIONS ON SEAT BELT USAGE If you are wearing your seat belt properly ad- justed and you are sitting upright and well back in your seat, your chances of being injured or killed in an accident and/or the severity of injury may be greatly reduced. NISSAN strongly encourages you and all of your pas...

WARNING ● Always route the shoulder belt over your shoulder and across your chest. Never run the belt behind your back, under your arm or across your neck. The belt should be away from your face and neck, but not falling off your shoulder. ● Position the lap belt as low and snug as possible AROUND T...

There are three basic types of child restraint systems: ● Rear facing child restraint ● Front facing child restraint ● Booster seat The proper restraint depends on the child’s size. Generally, infants up to about 1 year and less than 20 pounds (9 kg) should be placed in rear facing child restraints....

have a label certifying that it complies with Fed- eral Motor Vehicle Safety Standards or Canadian Motor Vehicle Safety Standards. Once the child has grown so the shoulder belt is no longer on or near the face and neck, use the shoulder belt without the booster seat. WARNING Never let a child stand ...

s 2 Move the shoulder belt anchor to the desired position so the belt passes over the center of the shoulder. Release the adjustment button to lock the shoulder belt anchor into position. WARNING ● After adjustment, release the adjust- ment button and try to move the shoul- der belt anchor up and do...

PRECAUTIONS ON CHILD RESTRAINTS WARNING ● Infants and small children should al- ways be placed in an appropriate child restraint while riding in the vehicle. Failure to use a child restraint can re- sult in serious injury or death. WARNING ● Infants and small children should never be carried on your...

CHILD RESTRAINT INSTALLATION ON REAR SEAT CENTER OR OUTBOARD POSITIONS WARNING ● The three-point seat belt in your vehicle is equipped with an automatic locking mode retractor which must be used when installing a child restraint. ● Failure to use the retractor’s locking mode will result in the child...

Rear facing When you install a child restraint in the rear seat, follow these steps: s 1 Position the child restraint on the seat. Al- ways follow the restraint manufacturer’s in- structions. s 2 Route the seat belt tongue through the child restraint and insert it into the buckle until you hear and ...

6. Check that the retractor is in the automatic locking mode by trying to pull more seat belt out of the retractor. If you cannot pull any more seat belt webbing out of the retractor, the retractor is in the automatic locking mode. 7. Check to make sure that the child restraint is properly secured p...

LATCH system. This information may also be in the instructions provided by the child restraint manufacturer. If you have such a child restraint, refer to the illustration for the seating positions equipped with LATCH system anchors which can be used to secure the child restraint.LATCH child restrain...

WARNING Child restraint anchor points are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstances are they to be used for adult seat belts or harnesses. Anchor point locations Anchor points are located on the rear parcel shelf finisher. If you have...

s 5 Before placing the child in the child restraint, use force to push the child restraint from side to side, and tug it forward to make sure that it is securely held in place. It should not move more than 1 inch (25 mm). If it does move more than 1 inch (25 mm), pull again on the shoulder belt to f...

BOOSTER SEAT INSTALLATION ON REAR SEAT CENTER OR OUTBOARD POSITIONS CAUTION Do not use a lap/shoulder belt automatic locking mode when using a booster seat with the seat belts. When you install a booster seat in the rear seat follow these steps: 1. Position the booster seat on the seat. Only place i...

BOOSTER SEAT INSTALLATION ON FRONT PASSENGER SEAT WARNING NISSAN recommends that child restraints be installed in the rear seat. However, if you must install a booster seat in the front passenger seat, move the passenger’s seat to the rearmost position. If you must install a booster seat in the fron...

PRECAUTIONS ON SUPPLEMENTAL RESTRAINT SYSTEM This Supplemental Restraint System (SRS) sec- tion contains important information concerning the driver and passenger supplemental front air bags (NISSAN Advanced Air Bag System), supplemental side air bags, curtain side-impact air bags and pre-tensioner ...

WARNING ● Children may be severely injured or killed when the supplemental front air bags, side air bags or curtain side- impact air bags inflate if they are not properly restrained. Pre-teens and chil- dren should be properly restrained in the rear seat, if possible. ARS1044 ARS1045 ARS1046 1-38 Sa...

8. Seat belt buckle switches on driver’sand passenger’s side 9. Occupant classification sensor (pres-sure sensor) 10. Seat belt pre-tensioner retractor 11. Side satellite sensor 12. LATCH (Lower Anchors and Tethers for CHildren) NISSAN Advanced Air Bag System (front seats) This vehicle is equipped w...

● Work on and around the supplemental front air bag system should be done by a NISSAN dealer. Installation of electri- cal equipment should also be done by a NISSAN dealer. The Supplemental Re- straint System (SRS) wiring should not be modified or disconnected. Unautho- rized electrical test equipme...

1. SRS air bag warning labels 2. SRS side air bag warning label (if soequipped) SUPPLEMENTAL AIR BAG WARNING LABELS Warning labels about the supplemental front air bag systems are placed in the vehicle as shown in the illustration. SUPPLEMENTAL AIR BAG WARNING LIGHT The supplemental air bag warning ...

WARNING If the supplemental air bag warning light is on, it could mean that the supplemental front air bag, supplemental side air bag, curtain side-impact air bag systems (if so equipped) and/or pre-tensioner seat belt systems will not operate in an accident. To help avoid injury to yourself or othe...

Safety—Seats, seat belts and supplemental restraint system 1-51 MEMO

2 Instruments and controls Instrument panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2Meters and gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Speedometer and odometer . . . . . . . . . . . . . . . . . . . . . 2-4Trip computer (if so equippe...

1. Driver, center and passenger ventila-tors (P. 4-11) 2. Headlight/fog light (if so equipped)/turnsignal switch (P. 2-21) 3. Steering wheel switch for audio control(if so equipped) (P. 4-40) 4. Driver supplemental air bag/horn(P. 1-34, 2-26) 5. Meters and gauges (P. 2-3) 6. Cruise control main/set ...

17. Front passenger air bag status light (P. 1-43) 18. Audio system controls (if so equipped) (P. 4-23) 19. Ignition switch (P. 5-4) 20. Tilt/telescopic steering wheel controls (P. 3-13) 21. Traction control system (TCS) off switch (if so equipped) (P. 2-28) 22. Instrument brightness control (P. 2-2...

When the ignition switch is turned to ON, modes of the trip computer can be selected by pushing the trip button on the steering wheel switch for audio controls or by the trip computer change button located near the speedometer. The fol- lowing modes can be selected: Outside air temperature (ICY-°F o...

ENGINE COOLANT TEMPERATURE GAUGE The gauge indicates the engine coolant tempera- ture. The engine coolant temperature is within the normal range s 1 when the gauge needle points within the zone shown in the illustration.The engine coolant temperature varies with the outside air temperature and drivi...

The indicates that the fuel-filler door is located on the driver’s side of the vehicle. CAUTION ● If the vehicle runs out of fuel,the malfunction indicator light (MIL) may come on. Refuel as soon as possible. After a few driving trips,the light should turn off. If the light remains on after a few dr...

VOLTMETER (if so equipped) When the ignition key is turned to the ON posi- tion, the voltmeter indicates the battery voltage. When the engine is running, it indicates the gen- erator voltage.While cranking the engine, the volts drop below the normal range. If the needle is not in the normal range (1...

or Anti-lock braking warning light(if so equipped) Low windshield washer fluid warning light Front passenger air bag status light Automatic transmission check warning light(if so equipped) Seat belt warning light and chime High beam indicator light (Blue) or Brake warning light Supplemental air bag ...

Trunk lid open warning light This light comes on when the trunk lid is not securely closed while the ignition key is in the ON position. INDICATOR LIGHTS Automatic transmission position indicator light (A/T models) When the ignition key is turned to the ON posi- tion, this indicator light shows the ...

vehicle inspected by a NISSAN dealer. You do not need to have your vehicle towed to the dealer. ● Malfunction indicator light blinking — An en- gine misfire has been detected which may damage the emission control system. To re- duce or avoid emission control system dam- age: – do not drive at speeds...

Light reminder chime With the ignition switch in the OFF position, a chime sounds when the driver’s door is opened if the headlights or parking lights are on.Turn the headlight control switch off before leav- ing the vehicle. Your vehicle may have two types of security sys- tems: ● Vehicle security ...

SWITCH OPERATION The windshield wiper and washer switch oper- ates when the ignition key is in the ON position.Push the lever down to operate the wiper at the following speed: s 1 Intermittent — intermittent operation can be adjusted by turning the knob toward s A (Slower) or s B (Faster). Also, for...

To defrost the rear window glass and outside mirrors (if so equipped), start the engine and push the rear window defroster switch on. The rear window defroster indicator light on the switch comes on. Push the switch again to turn the defroster off.The rear window defroster automatically turns off af...

XENON HEADLIGHTS (if so equipped) WARNING c HIGH VOLTAGE ● When xenon headlights are on, they produce a high voltage. To prevent an electric shock, never attempt to modify or disassemble. Always have your xe- non headlights replaced at a NISSAN dealer. ● Xenon headlights provide considerably more li...

CAUTION Use the headlights with the engine run- ning to avoid discharging the vehicle battery. Autolight system (if so equipped) The autolight system allows the headlights to be set so they turn on and off automatically. The autolight system can: ● Turn on the headlights, front parking, tail, licens...

CAUTION Even though the battery saver feature au- tomatically turns off the headlights after a period of time, you should turn the head- light switch to the OFF position when the engine is not running to avoid discharging the vehicle battery. DAYTIME RUNNING LIGHT SYSTEM (Canada only) The headlights...

TURN SIGNAL SWITCHTurn signal s 1 Move the lever up or down to signal the turning direction. When the turn is com- pleted, the turn signals cancel automatically. Lane change signal s 2 To signal a lane change, move the lever up or down to the point where the indicator light begins to flash, but the ...

Push the switch on to warn other drivers when you must stop or park under emergency condi- tions. All turn signal lights flash. WARNING ● If stopping for an emergency, be sure to move the vehicle well off the road. ● Do not use the hazard warning flashers while moving on the highway unless unusual c...

The vehicle should be driven with the Traction Con- trol System (TCS) on for most driving conditions.If the vehicle is stuck in mud or snow, the TCS reduces the engine output to reduce wheel spin. The engine speed will be reduced even if the accelerator is depressed to the floor. If maximum engine p...

● Before inserting or disconnecting a plug, be sure the electrical accessory being used is turned OFF. ● Push the plug in as far as it will go. If good contact is not made, the plug may overheat or the internal temperature fuse may open. ● When not in use, be sure to close the cap. Do not allow wate...

● When not in use, be sure to close the cap. Do not allow water to contact the outlet. MAP POCKETS SEATBACK POCKETS (if so equipped) The seatback pockets are located on the back of the driver’s and passenger’s seats. The pockets can be used to store maps. WIC0700 Type A LIC0016 STORAGE 2-30 Instrume...

SUNGLASSES HOLDER To open the sunglasses holder, push and release. WARNING ● The sunglasses holder should not be used while driving so full attention may be given to vehicle operation. ● Keep the sunglasses holder closed while driving to prevent an accident. CAUTION ● Do not use for anything other t...

CUP HOLDERS To open the front cup holders, push the cup holder lid. To close, lower the cup holder lid and push down until it clicks in place.The plastic insert may be removed for cleaning.The rear cup holders are located in the fold-down armrest in the rear seat back.The rubber insert may be remove...

GLOVE BOX Open the glove box by pulling the handle. Use the master key when locking s 1 or unlocking s 2 the glove box. The valet key cannot be used to lock or unlock the glove box. WARNING Keep glove box lid closed while driving to help prevent injury in an accident or a sudden stop. CONSOLE BOX WA...

● The inside of the storage tray can get hot. Do not place objects inside which can melt or be easily deformed. WARNING ● The storage tray should not be used while driving so full attention may be given to vehicle operation. ● Keep the tray lid closed while driving to help prevent contents from beco...

GROCERY HOOKS (if so equipped) The grocery hooks are located in the trunk and can be used to hang a standard size plastic grocery bag. CAUTION Do not apply a total load of more than 20 lbs (9 kg) to a single grocery hook. LIC0748 WIC0733 2-36 Instruments and controls Z REVIEW COPY— 2006 Altima (l30)...

CARGO NET (if so equipped) WARNING ● Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. In a sudden stop or collision, unsecured cargo could cause personal injury. ● Be sure to secure all four hooks into the retainers. The cargo restrained in the net must not...

1. Power door lock switch 2. Window lock button 3. Front passenger side (automatic switch,if so equipped) 4. Right rear passenger side 5. Left rear passenger side 6. Driver side automatic switch Driver’s side power window switch The driver’s side control panel is equipped with switches to open or cl...

Automatic operation To fully open a window equipped with automatic operation, press the window switch down (only driver’s side shown) to the second detent and release it; it need not be held. The window auto- matically opens all the way. To stop the window, lift the switch up while the window is ope...

To open the sunroof part way, push the switch in any direction while the sunroof is sliding open to stop it in the desired position.To close the sunroof part way, push and hold the switch until the sunroof is in the desired position. Tilting the sunroof To tilt the sunroof up, push the tilt switch t...

● The driver’s door is opened and then closed while the key is removed from the ignition switch. ● The key is removed from the ignition switch while all doors are closed. The lights will turn off while the 30 second timer is activated when: ● The driver’s door is locked by the keyfob (if so equipped...

The light illuminates when the trunk lid is opened. When the trunk lid is closed, the light goes off.The light will go off after about 30 minutes if the trunk lid is left open, unless the ignition key is in the ACC or ON position.For bulb replacement procedures, refer to “Exte- rior and interior lig...

WARNING ● Do not use the HomeLink T Universal Transceiver with any garage door opener that lacks safety stop and re- verse features as required by federal safety standards. (These standards be- came effective for opener models manufactured after April 1, 1982) . A ga- rage door opener which cannot d...

3 Pre-driving checks and adjustments Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 Nissan vehicle immobilizer system keys . . . . . . . . . . . 3-2 Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 L...

1. Two master keys (black) with transpon-der chip and chrome NISSAN brandsymbol on one side 2. Valet key (black) with transponder chip(if so equipped) 3. Key number plate 4. Transponder chip A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as you...

WARNING ● Always have the doors locked while driving. Along with the use of seat belts, this provides greater safety in the event of an accident by helping to prevent persons from being thrown from the vehicle. This also helps keep children and others from unintentionally open- ing the doors, and wi...

LOCKING WITH INSIDE LOCK KNOB To lock the door without the key, move the inside lock to the lock position s 1 , then close the door. To unlock the door without the key, move the inside lock knob to the unlock position s 2 . LOCKING WITH POWER DOOR LOCK SWITCH To lock all the doors without a key, pus...

CHILD SAFETY REAR DOOR LOCK Child safety locks help prevent the rear doors from being opened accidentally, especially when small children are in the vehicle.The child safety lock levers are located on the edge of the rear doors. When the lever is in the lock position, the door can be opened only fro...

● All doors unlock. ● The hazard indicator flashes once if all doors are completely closed. The interior lights can be turned off without wait- ing 30 seconds by inserting the key into the ignition and turning to the ON or START position, locking the doors with the keyfob or pushing the interior lig...

s 1 Pull the hood lock release handle located below the driver side instrument panel; the hood springs up slightly. s 2 Lift the lever at the front of the hood with your fingertips and raise the hood. s 3 Remove the support rod from the clamp. s 4 Insert the support rod into the slot on the passenge...

OPENER OPERATION WARNING ● Do not drive with the trunk lid open. This could allow dangerous exhaust gases to be drawn into the vehicle. See “Ex- haust gas” in the “Starting and driving” section of this manual. ● Closely supervise children when they are around cars to prevent them from playing and be...

KEY OPERATION (if so equipped) To open the trunk lid, turn the key clockwise. To close the trunk lid, lower and push the trunk lid down securely. INTERIOR TRUNK LID RELEASE WARNING Closely supervise children when they are around cars to prevent them from playing and becoming locked in the trunk wher...

● Do not fill a portable fuel container in the vehicle or trailer. Static electricity can cause an explosion of flammable liquid, vapor or gas in any vehicle or trailer. To reduce the risk of serious injury or death when filling portable fuel containers: – Always place the container on the ground wh...

TELESCOPIC OPERATION Push the lock lever s 3 down and adjust the steering wheel forward or backward s 4 to the desired position.Pull the lock lever up firmly to lock the steering wheel in place. WARNING Do not adjust the steering wheel any closer to you than is necessary for proper steering operatio...

REARVIEW MIRROR The night position s 1 reduces glare from the headlights of vehicles behind you at night.Use the day position s 2 when driving in daylight hours. WARNING Use the night position only when neces- sary, because it reduces rear view clarity. 1. AUTO button 2. OFF button 3. AUTO indicator...

Electric control type (if so equipped) The outside mirror remote control only operates when the ignition switch is in the ACC or ON position.Rotate the control lever to select the right or left mirror. Adjust the mirror to the desired position by moving the control lever. Manual control type The out...

WARNING ● Positioning of the heating or air condi- tioning controls and display controls should not be done while driving in or- der that full attention may be given to the driving operation. ● Do not disassemble or modify this sys- tem. If you do, it may result in accidents, fire, or electrical sho...

Vehicle electronic systems The VEHICLE ELECTRONIC SYSTEMS screen will appear when selecting the “Vehicle Elec- tronic Systems” key with the joystick and push- ing the “ENTER” button. To set the various electronic systems operating conditions, select the applicable item using the joystick, and push t...

● Higher- more sensitive, automatic head- lights will come on quicker when the head- light sensor senses less ambient light. Automatic headlights off delay: This key allows you to set the length of time before the automatic headlights turn off after exiting the vehicle. Speed dependent wiper: This k...

2. Select one of the following zones depending on the current location. ● Pacific zone ● Mountain zone ● Central zone ● Eastern zone ● Atlantic zone ● Newfoundland zone After selection, the [CLOCK SETTINGS] screen will appear. The GPS time (manual time) corresponding to the selected zone will be dis...

Adjust air flow direction for the driver side s 1 , center s 2 , and passenger side s 3 ventilators by moving the ventilator slide and/or ventilator as- semblies. WARNING ● The air conditioner cooling function op- erates only when the engine is running. ● Do not leave children or adults who would no...

1. Fan control dial 2. Air recirculation button 3. Temperature control dial 4. Air conditioner button (if so equipped) 5. Air flow control dial 6. Rear window defroster CONTROLSFan control dial The fan control dial turns the fan on and off, and controls fan speed. Air flow control dial The air flow ...

1. Fan control dial 2. Air recirculation button 3. Temperature dial A. 60° F (18° C) B. 75° F (25° C) C. 90° F (32° C) 4. A/C ON/OFF button 5. Air flow control dial 6. Rear defrost button WARNING ● The air conditioner cooling function op- erates only when the engine is running. ● Do not leave childr...

To turn system off Turn the fan control dial to the OFF position. OPERATING TIPS ● When the engine coolant temperature and outside air temperature are low, the air flow from the foot outlets may not operate for a maximum of 150 seconds. However, this is not a malfunction. After the coolant tempera- ...

RADIO Turn the ignition key to the ACC or ON position and press the PWR (power)/VOL (volume) knob to turn the radio on. If you listen to the radio with the engine not running, the key should be turned to the ACC position.Radio reception is affected by station signal strength, distance from radio tra...

1. PRESET ABC button 2. MIX button 3. Display 4. CD select button 5. FM band select button 6. AM band select button 7. CD eject button 8. PAUSE/MUTE button 9. TUNE/FF-REV button 10. CLOCK button 11. Preset scan (P-SCAN) button 12. AUDIO button 13. SCAN button 14. Station preset buttons 15. CD insert...

When no CD is loaded, the radio comes on. Pressing the PWR/VOL control knob again turns the system off.Turn the PWR/VOL control knob to the right to increase volume or to the left to decrease volume. Adjusting tone quality and speaker balance Press the AUDIO button to enter the audio adjust mode:Bas...

The FM stereo indicator ST will glow during FM stereo reception. When the stereo broadcast signal is weak, the radio will automatically change from stereo to monaural reception. TUNE/FF—REV WARNING The radio should not be tuned while driv- ing so full attention may be given to ve- hicle operation. U...

13. CD eject button 14. POWER/VOLUME control knob 15. Station and CD select buttons (1 - 6) 16. Tuning and AUDIO control knob (BASS, MID, TREBLE, FADE, BAL-ANCE and SSV) *No satellite radio reception is availableand “NO SAT” is displayed when theSAT button is pressed unless optionalsatellite receive...

4. The channel indicator will then come on and the sound will resume. Memorizing is now complete. 5. Other buttons can be set in the same man- ner. If the battery cable is disconnected, or if the fuse blows, the radio memory will be canceled. In that case, reset the desired stations. Radio data syst...

1 DISC RDM: Tracks from the disc that is cur- rently playing will be played randomly CD EJECT: Current disc: ● Press the slot number (1 – 6) for the desired disc, then press the button. The com- pact disc will be ejected. If the disc is not removed within 15 seconds, the disc will reload. All discs:...

1. Volume control switch 2. Mode select switch 3. Trip 4. Audio tuning Up/Down POWER on/off switch (Type A) With the ignition key turned to the ACC or ON position, push the POWER switch to turn the audio system on or off. Trip set (Type B) For information on using the trip computer see “Trip compute...

When installing a CB, ham radio or car phone in your NISSAN, be sure to observe the following precautions, otherwise the new equipment may adversely affect the engine control system and other electronic parts. WARNING ● A cellular telephone should not be used while driving so full attention may be g...

5 Starting and driving Precautions when starting and driving. . . . . . . . . . . . . . . . 5-2 Exhaust gas (carbon monoxide) . . . . . . . . . . . . . . . . . . 5-2Three-way catalyst. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2Avoiding collision and rollover . . . . . . . . . . . ...

WARNING ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a close...

CAUTION ● Do not use leaded gasoline. Deposits from leaded gasoline will seriously re- duce the three-way catalyst’s ability to help reduce exhaust pollutants. ● Keep your engine tuned up. Malfunc- tions in the ignition, fuel injection, or electrical systems can cause overrich fuel flow into the thr...

AUTOMATIC TRANSMISSION The ignition lock is designed so the key cannot be turned to the LOCK position and removed until the shift selector lever is moved to the P (Park) position.When removing the key from the ignition, make sure the shift selector lever is in the P (Park) position.If the selector l...

MANUAL TRANSMISSION The ignition switch includes a device that helps prevent accidental removal of the key while driv- ing.The key can only be removed when the ignition switch is in the LOCK position.On manual transmission models, to turn the igni- tion key to LOCK position from ACC or ON position, ...

● Make sure the area around the vehicle is clear. ● Check fluid levels such as engine oil, cool- ant, brake and clutch fluid, and window washer fluid as frequently as possible, or at least whenever you refuel. ● Check that all windows and lights are clean. ● Visually inspect tires for their appearan...

4. Allow the engine to idle for at least 30 sec- onds after starting. Do not race the engine while warming it up. Drive at moderate speed for a short distance first, especially in cold weather. AUTOMATIC TRANSMISSION (if so equipped) WARNING ● Do not depress the accelerator pedal while shifting from...

If the key is turned to the OFF or ACC position for any reason while the vehicle is in N (Neutral), or any D (Drive) position, the shift selector lever cannot be moved to P (Park). Additionally, the key cannot be turned to the LOCK position and be removed from the ignition switch. If this occurs, pe...

Manual shift mode When the selector lever is shifted from D to the manual shift gate with the vehicle stopped or while driving, the transmission enters the manual shift mode. Shift ranges can be selected manu- ally.In the manual shift mode, the shift range is dis- played on the position indicator in...

Shift lock release If the battery is discharged, the shift selector lever may not be moved from the P (Park) position even with the brake pedal depressed.To move the shift selector lever, release the shift lock. The shift selector lever can be moved to N (Neutral). However, the steering wheel will b...

Accelerator downshift — in D position — For passing or hill climbing, depress the accel- erator pedal to the floor. This shifts the transmis- sion down into a lower gear, depending on the vehicle speed. Fail-safe When the fail-safe operation occurs, please note that the transmission will be locked i...

use the highest gear suggested for that speed. Always observe posted speed limits, and drive according to the road conditions, which will en- sure safe operation. Do not over-rev the engine when shifting to a lower gear as it may cause engine damage or loss of vehicle control. GEAR QR25DE MPH (km/h)...

4. Before driving, be sure the brake warning light goes out. 1. ACCEL/RES switch 2. COAST/SET switch 3. ON/OFF switch 4. CANCEL switch PRECAUTIONS ON CRUISE CONTROL ● If the cruise control system malfunctions, it cancels automatically. The SET indicator light in the instrument panel then blinks to w...

CAUTION On manual transmission models, do not shift into N (Neutral) without depressing the clutch pedal when the cruise control is set. Should this occur, depress the clutch pedal and turn the main switch off imme- diately. Failure to do so may cause engine damage. CRUISE CONTROL OPERATIONS The cru...

CAUTION During the first 1,200 miles (2,000 km) , follow these recommendations to obtain maximum engine performance and en- sure the future reliability and economy of your new vehicle. Failure to follow these recommendations may result in short- ened engine life and reduced engine performance. ● Avo...

WARNING ● Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. ● Safe parking procedures require that both the parking brake be set and the transmission placed into P (Park) for automatic transmission models or in an appro...

● HEADED UPHILL OR DOWNHILL, NO CURB: s C Turn the wheels toward the side of the road so the vehicle will move away from the cen- ter of the road if it moves. 4. Turn the ignition key to the LOCK position and remove the key. The power assisted steering uses a hydraulic pump, driven by the engine, to...

WARNING ● While driving on a slippery surface, be careful when braking, accelerating or downshifting. Abrupt braking or accel- erating could cause the wheels to skid and result in an accident. ● If the engine is not running or is turned off while driving, the power assist for the brakes will not wor...

WARNING ● The traction control system is designed to help improve driving stability but does not prevent accidents due to abrupt steering operation at high speeds or by careless or dangerous driving techniques. Reduce vehicle speed and be especially careful when driving and cornering on slippery sur...

DRAINING OF COOLANT WATER If the vehicle is to be left outside without anti- freeze, drain the cooling system, including the engine block. Refill before operating the vehicle. For details, see “Changing engine coolant” in the “Maintenance and do-it-yourself” section of this manual. TIRE EQUIPMENT 1....

DRIVING ON SNOW OR ICE WARNING ● Wet ice (32°F, 0°C and freezing rain) , very cold snow or ice can be slick and very hard to drive on. The vehicle will have much less traction or “grip” under these conditions. Try to avoid driving on wet ice until the road is salted or sanded. ● Whatever the conditi...

6 In case of emergency Flat tire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 Changing a flat tire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 Jump starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6Pus...

CHANGING A FLAT TIRE If you have a flat tire, follow the instructions be- low. Stopping the vehicle 1. Safely move the vehicle off the road and away from traffic. 2. Turn on the hazard warning flashers.3. Park on a level surface and apply the parking brake. Shift the manual transmission into R (Reve...

Getting the spare tire and tools Open the trunk. Lift the trunk floor carpeting and spare tire cover. Remove the jack s 1 and wheel nut wrench s 2 from the tool box. Remove the spare tire. Removing the bolt-on wheel cover (if so equipped) CAUTION Do not use your hands to pry off wheel caps or wheel ...

Installing the spare tire The spare tire is designed for emergencyuse. See specific instructions under theheading “Wheels and tires” in the “Mainte-nance and do-it-yourself” section of thismanual. 1. Clean any mud or dirt from the surface be- tween the wheel and hub. 2. Carefully put the spare tire ...

To start your engine with a booster battery, the instructions and precautions below must be fol- lowed. WARNING ● If done incorrectly, jump starting can lead to a battery explosion, resulting in severe injury or death. It could also damage your vehicle. ● Explosive hydrogen gas is always present in ...

8. Replace the vent caps (if so equipped). Be sure to dispose of the cloth used to cover the vent holes as it may be contaminated with corrosive acid. CAUTION ● Three-way catalyst equipped models should not be started by pushing. The three-way catalyst may be damaged. ● Automatic transmission models...

3. Get out of the vehicle. Look and listen for steam or coolant escaping from the radiator before opening the hood. (If steam or cool- ant is escaping, turn off the engine.) Do not open the hood further until no steam or coolant can be seen. 4. Open the engine hood. WARNING If steam or water is comi...

For information about towing your vehicle behind a recreational vehicle (RV), refer to “Flat towing” in the “Technical and consumer information” sec- tion of this manual. TOWING RECOMMENDED BY NISSAN NISSAN recommends that your vehicle be towed with the driving (front) wheels off the ground or place...

● When towing automatic transmission models with the front wheels on towing dollies, or when towing manual trans- mission models with the front wheels on the ground: – Turn the ignition key to the OFF po- sition, and secure the steering wheel in a straight-ahead position with a rope or similar devic...

3. Turn the steering wheel right and left to clear an area around the front tires. 4. Slowly rock the vehicle forward and back- ward. ● Shift back and forth between R (reverse) and D (drive) (automatic transmission models) or 1st (low) and R (reverse) (manual transmission models). ● Apply the accele...

7 Appearance and care Cleaning exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2Waxing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2Removing sp...

In order to maintain the appearance of your ve- hicle, it is important to take proper care of it.To protect the paint surfaces, please wash your vehicle as soon as you can: ● after a rainfall to prevent possible damage from acid rain. ● after driving on coastal roads. ● when contaminants such as soo...

UNDERBODY In areas where road salt is used in winter, it is necessary to clean the underbody regularly in order to prevent dirt and salt from building up and causing the acceleration of corrosion on the un- derbody and suspension. Before the winter pe- riod and again in the spring, the underseal mus...

react with the coating and form a compound. This compound may come off the tire while driving and stain the vehicle paint.If you choose to use a tire dressing, take the following precautions: ● Use a water-based tire dressing. The coat- ing on the tire dissolves more easily with an oil-based tire dr...

Floor mat positioning aid (driver’s side only) This vehicle includes a front floor mat bracket to act as a floor mat positioning aid. NISSAN floor mats have been specially designed for your ve- hicle model. The driver’s side floor mat has a grommet hole incorporated in it. Position the mat by placin...

Your new NISSAN has been designed to have minimum maintenance requirements with longer service intervals to save you both time and money. However, some day-to-day and regular maintenance is essential to maintain your NIS- SAN’s good mechanical condition, as well as its emission and engine performanc...

When performing any inspection or maintenance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle. The following are general precau- tions which should be closely observed. WARNING ● Park the vehicle on a level surface, ap- ply the parking...

You should be aware that incomplete or improper servicing may result in operating difficulties or excessive emissions, and could affect warranty coverage. If in doubt about any servicing, have it done by a NISSAN dealer. 8-6 Maintenance and do-it-yourself Z REVIEW COPY— 2006 Altima (l30) Owners Manu...

The engine cooling system is filled at the factory with Genuine NISSAN Long Life Antifreeze/Coolant to provide year-round anti- freeze and coolant protection. The anti-freeze solution contains rust and corrosion inhibitors. Additional engine cooling system additives are not necessary. WARNING ● Neve...

CHANGING ENGINE COOLANT A NISSAN dealer can change the engine coolant. The service procedure can be found in the NISSAN Service Manual. Improper servicing can result in reduced heater performance and engine overheat- ing. WARNING ● To avoid the danger of being scalded, never change the coolant when ...

5. Remove the dipstick again and check the oil level. It should be between the H (High) and L (Low) marks s B . This is the normal oper- ating oil level range. If the oil level is below the L (Low) mark s A , remove the oil filler cap and pour recommended oil through the opening. Do not overfill s C...

CHANGING ENGINE OIL FILTER 1. Park the vehicle on a level surface and apply the parking brake. 2. Turn the engine off.3. Place a large drain pan under the oil filter s A . 4. Loosen the oil filter s A with an oil filter wrench by turning it counterclockwise. Then remove the oil filter by turning it ...

WARNING ● When the engine is running, keep hands, jewelry and clothing away from any moving parts such as the cooling fan and drive belts. ● Automatic transmission fluid is poison- ous and should be stored carefully in marked containers out of the reach of children. TEMPERATURE CONDITIONS FOR CHECKI...

For further brake and clutch fluid specification information, refer to “Capacities and recom- mended fuel/lubricants” in the “Technical and consumer information” section of this manual. WARNING Use only new fluid from a sealed con- tainer. Old, inferior or contaminated fluid may damage the brake and...

WINDOW WASHER FLUID RESERVOIR Fill the window washer fluid reservoir periodically. Add window washer fluid when the low window washer fluid warning light comes on (if so equipped).To fill the window washer fluid reservoir, lift the cap off the reservoir tank and pour the window washer fluid into the...

Vehicles operated in high temperatures or under severe conditions require frequent checks of the battery fluid level. JUMP STARTING If jump starting is necessary, see “Jump starting” in the “In case of emergency” section of this manual. If the engine does not start by jump starting, the battery may ...

1. Power steering fluid pump 2. Crank pulley 3. Generator 4. Air conditioner REPLACING SPARK PLUGSPlatinum-tipped spark plugs It is not necessary to replace platinum-tipped spark plugs as frequently as conventional type spark plugs because they last much longer. Fol- low the maintenance log shown in...

6. Fit the new plugs, one at a time, into the spark plug socket and install them. Use only the specified spark plugs. Turn each plug several full turns by hand, then tighten with the spark plug socket to the correct torque. Do not overtighten. Spark plug tightening torque: 14 - 22 ft-lb (20 - 29 N·m...

1. Remove the 2 lower glove box hinge pins. Remove the glove box from the opening and let it hang by the cord. 2. Remove the filter cover from the intake unit by disengaging the 2 hook tabs at the bot- tom of the cover. NOTE:The filter is marked “UP” with an arrow. The end of the filter with the arr...

NOTE:Make sure the filter sits on top of the 2 supporting tabs on the housing. 4. Replace the cover by inserting the upper tabs inside the housing slot and pushing the hook tabs until they snap on to the housing lip. 5. Install the glove box door.6. Fill out the date information on the small replace...

CLEANING If your windshield is not clear after using the windshield washer or if a wiper blade chatters when running, wax or other material may be on the blade or windshield.Clean the outside of the windshield with a washer solution or a mild detergent. Your windshield is clean if beads do not form ...

If you wax the surface of the hood, be careful not to let wax get into the washer nozzle s 1 . This may cause clogging or improper windshield washer operation. If wax gets into the nozzle, remove it with a needle or small pin s 2 . CHECKING PARKING BRAKE From the released position, pull the parking ...

Self-adjusting brakes Your vehicle is equipped with self-adjusting brakes.The front and rear disc-type brakes self-adjust every time the brake pedal is applied. WARNING See a NISSAN dealer for a brake system check if the brake pedal height does not return to normal. Brake pad wear indicators The dis...

PASSENGER COMPARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not operate, check for an open fuse. 1. Be sure the ignition switch and the headlight sw...

Replace the battery in the keyfob as follows: s 1 Open the lid using a coin s A . s 2 Remove the battery s B . s 3 Install a new battery s C with the “+” facing down. Recommended battery: CR2025 or equivalent. s 4 Close the lid securely. 5. Press the button, then the button two or three times to che...

If the battery is removed for any reason other than replacement, perform step 5. ● An improperly disposed battery can hurt the environment. Always confirm local regulations for battery disposal. ● The keyfob is water-resistant; how- ever, if it does get wet, immediately wipe completely dry. ● The op...

FRONT PARK/TURN/SIDEMARKER LIGHT Bulb replacement requires the removal of the headlight assembly. If replacement is required, see your NISSAN dealer. FOG LIGHTS (if so equipped)Replacing the fog light bulb CAUTION ● High pressure halogen gas is sealed inside the halogen bulb. The bulb may break if t...

Replacement procedures All other lights are either type A, B, C or D. When replacing a bulb, first remove the lens, lamp and/or cover. Indicates bulb removalIndicates bulb installation Use a cloth s 1 to protect the interior light hous- ing. WDI0263 Interior light WDI0233 Step light WDI0234 Maintena...

License plate light WDI0235 8-36 Maintenance and do-it-yourself Z REVIEW COPY— 2006 Altima (l30) Owners Manual—USA_English (nna)03/03/06—debbie X

Map light - Models with sunroof WDI0451 Maintenance and do-it-yourself 8-37 Z REVIEW COPY— 2006 Altima (l30) Owners Manual—USA_English (nna)03/03/06—debbie X

Map light - Models without sunroof WDI0237 8-38 Maintenance and do-it-yourself Z REVIEW COPY— 2006 Altima (l30) Owners Manual—USA_English (nna)03/03/06—debbie X

Rear combination light To access the bulbs in the rear combination light: s 1 Remove the 2 fasteners. Carefully push back the carpet. s 2 Remove the 2 nuts and pull out the rear combination light. s 3 Rotate the bulb(s) counterclockwise and pull out to remove: s A Turn signal light s B Sidemarker li...

If you have a flat tire, see the “In case ofemergency” section of this manual. TIRE PRESSURETire inflation pressure Check the tire pressures (including the spare) often and always prior to long dis- tance trips. The recommended tire pres- sure specifications are shown on the F.M.V.S.S./C.M.V.S.S. la...

Size Cold Tire Inflation Pressure High Speed/ Maximum Load Cold Tire Inflation Pressure Front Original Tire P215/60/R16 94T 200 kPa, 29 PSI 240 kPa, 35 PSI P215/55R17 93H P215/55R17 93V 230 kPa, 33 PSI 240 kPa, 35 PSI P225/45R18 91Y 240 kPa, 35 PSI 260 kPa, 38 PSI Rear Original Tire P215/60R16 94T 2...

The word 9 radial 9 is shown if the tire has radial structure. s 8 Manufacturer or brand name Manufacturer or brand name is shown. Other Tire-related Terminology In addition to the many terms that are defined throughout this section, Intended Outboard Sidewall is (1) the sidewall that contains a whi...

studded tires. Skid and traction capabilities of studded snow tires on wet or dry surfaces may be poorer than that of non-studded snow tires. TIRE CHAINS CAUTION Tire chains/cables cannot be installed on P225/45R18 size tires. Installation of the tire chains/cables on P225/45R18 size tires will caus...

Wheel nut tightening torque: 80 ft-lb (108 N·m) The wheel nuts must be kept tight- ened to specifications at all times. It is recommended that wheel nuts be tightened to specification at each tire rotation interval. WARNING ● After rotating the tires, check and adjust the tire pressure. ● Retighten ...

Replacing wheels and tires When replacing a tire, use the same size, tread design, speed rating and load carrying capacity as originally equipped. Recommended types and sizes are shown in “Wheels and tires” in the “Technical and consumer information” section of this manual. WARNING ● The use of tire...

● NISSAN recommends waxing the road wheels to protect against road salt in areas where it is used during winter. Spare tire (TEMPORARY USE ONLY spare tire) Observe the following precautions if the TEM- PORARY USE ONLY spare tire must be used. Otherwise, your vehicle could be damaged or involved in a...

9 Technical and consumer information Capacities and recommended fuel/lubricants . . . . . . . . . 9-2 Fuel recommendation . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3Engine oil and oil filter recommendation . . . . . . . . . . . 9-5Recommended SAE viscosity number . . . . . . . . . . . ...

The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure described in the “Maintenance and do-it-yourself” section to determine the proper refill capacity. Capacity (Approximate) Recommended Fluids and Lubricants US measur...

FUEL RECOMMENDATION For 2.5L engineUse unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) num- ber (Research octane number 91).For 3.5LUse unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) num- ber (Research octane number 91).For...

ENGINE Model QR25DE VQ35DE Type Gasoline, 4-cycle, DOHC Gasoline, 4-cycle, DOHC Cylinder arrangement 4-cylinder in-line 6-cylinder, V-block, Slanted at 60° Bore x Stroke in (mm) 3.5 x 3.9 (89.0 x 100.0) 3.760 x 3.205 (95.5 x 81.4) Displacement cu in (cm 3 ) 151.82 (2,488) 213.45 (3,498) Firing order...

When planning to drive your NISSAN ve- hicle in another country, you should first find out if the fuel available is suitable for your vehi- cle’s engine.Using fuel with an octane rating that is too low may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline. There- for...

ENGINE SERIAL NUMBER The number is stamped on the engine as shown. F.M.V.S.S./C.M.V.S.S. CERTIFICATION LABEL The Federal/Canadian Motor Vehicle Safety Standard (F.M.V.S.S./C.M.V.S.S.) certification la- bel is affixed as shown. This label contains valu- able vehicle information, such as: Gross Vehicl...

Use the following steps to mount the front license plate: s 1 Make a shallow hole in each plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. To avoid damaging the threads behind the finisher, apply only light pressure to the drill. s 2 Mount the license plate bracket ...

VEHICLE LOAD CAPACITY Do not exceed the load limit of your ve- hicle shown as 9 The combined weight of occupants and cargo 9 on the Tire and Loading Information label (if so equipped). Do not exceed the number of occupants shown as 9 Seating Capacity 9 on Tire and Loading Information label (if so eq...

● Overloading not only can shorten the life of your vehicle and the tire, but can also cause unsafe vehicle handling and longer brak- ing distances. This may cause a premature tire failure which could result in a serious accident and personal injury. Failures caused by overloading are not covered by...

The GCWR equals the combined weight of the towing vehicle (including passengers and cargo) plus the total trailer load. Towing loads greater than these or using improper towing equipment could adversely affect vehicle handling, braking and performance.The ability of your vehicle to tow a trailer is ...

Maximum Gross Vehicle Weight (GVW)/Maximum Gross Axle Weight (GAW) The GVW of the towing vehicle must not exceed the Gross Vehicle Weight Rating (GVWR) shown on the F.M.V.S.S./C.M.V.S.S. certification label. The GVW equals the combined weight of the unloaded vehicle, passengers, luggage, hitch, trai...

4,203 lb. (1906 kg) GVWR – 3,961 lb. (1796 kg) GVW = 242 lb. (109 kg) Available for tongue weight 1,000 lb. (454 kg) Capacity available for towing 242 lb. (109 kg) Available tongue weight / 1,000 lb. (454 kg) Available capacity = 24 % tongue weight In this case, more tongue weight capacity is availa...

towing the maximum trailer weights shown in the Towing Load/Specification Chart earlier in this section. CAUTION ● Do not use axle-mounted hitches. ● The hitch should not be attached to or affect the operation of the impact- absorbing bumper. ● Do not modify the vehicle exhaust sys- tem, brake syste...

WARNING Never connect a trailer brake system di- rectly to the vehicle brake system. Pre-towing tips ● Be certain your vehicle maintains a level position when a loaded and/or unloaded trailer is hitched. Do not drive the vehicle if it has an abnormal nose-up or nose-down condition; check for imprope...

are towing trailers. Obey the local speed limits. ● Check your hitch, trailer wiring harness con- nections, and trailer wheel lug nuts after 50 miles (80 km) of travel and at every break. ● When stopped in traffic for long periods of time in hot weather, put the vehicle in the P (Park) position. ● W...

DOT (Department of Transportation) Quality Grades: All passenger car tires must conform to federal safety requirements in addition to these grades.Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: Treadwear 200 Traction A...

Your NISSAN vehicle is covered by the following emission warranties: For USA 1. Emission Defects Warranty2. Emissions Performance Warranty Details of these warranties may be found with other vehicle warranties in your Warranty Infor- mation Booklet which comes with your NISSAN vehicle. If you did no...

WARNING Always drive the vehicle in a safe and prudent manner according to traffic con- ditions and obey all traffic laws. 1. Start the engine when the engine coolant temperature gauge needle points to C. Al- low the engine to idle until the gauge needle points between the C and H (normal oper- atin...

A genuine NISSAN Service Manual is the best source of service and repair information for your vehicle. Filled with wiring diagrams, illustrations and step-by-step diagnostic and adjustment pro- cedures, this manual is the same one used by the factory-trained technicians working at NISSAN dealerships...

RECOMMENDED FUEL: For 2.5L engineUse unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) num- ber (Research octane number 91).For 3.5L engineUse unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) num- ber (Research octane number 91...

1. Engine coolant 8-9 2. Window washer fluid 8-18 3. Engine oil 8-10 4. Passenger supplemental front impact air bag1-34 5. Audio system 4-23, 4-25, 4-30; Air condi-tioner 4-11, 4-20 6. Supplemental side-impact air bag(if so equipped) 1-34 7. Front seats 1-2 8. Spare tire 6-2 9. Fuel-filler door rele...