Page 2 - CONTENTS; N OT E; OPERATING YOUR KEGGER MEISTER
1 CONTENTS The rating data indicated on the energy label is based on the testing condition of installing the un - extended air exhaust duct without adaptor A & B ( The duct and the adaptor A & B are listed in the accessories chart of the Instruction Manual ). N OT E ............................
Page 3 - SAFETY PRECAUTIONS
2 SAFETY PRECAUTIONS Read all of the instructions before using this appliance. When using this appliance, always exercise basic safety precautions, including the following: Use this appliance only for its intended purpose as described in this operation manual.This appliance must be properly installe...
Page 4 - appliance beyond 45° or place the unit in an upside down position.
3 SAFETY PRECAUTIONS This appliance is not intended for use by young children or infirm persons without supervision.This appliance is NOT A TOY!Young children should be supervised to ensure that they do not play with this appliance.When transporting the refrigerator, keep the unit in the upright pos...
Page 5 - Impor tant Safety Precautions of CO
4 SAFETY PRECAUTIONS Impor tant Safety Precautions of CO 2 (Carbon Dioxide) Gas Co 2 gas can be dangerous! CO cylinders contain high-pressure compressed 2 gas, which can be hazardous if not handled properly. Make sure you read and understand all the procedures for the CO cylinders before installatio...
Page 6 - Risk of child entrapment! Before throwing away your old appliance:; Proper Location; Use of Extension Cords; kegerator; ASSEMBLY INSTRUCTIONS
5 SAVE THESE INSTRUCTIONS For Future Use Risk of child entrapment! Before throwing away your old appliance: ● Take off the doors. ● Leave the shelves or other accessories in place so that children may not easily become trapped inside. (Note: If the refrigerator has been placed in a horizontal or til...
Page 7 - Installing the Casters; Installing the Beer Tap; simply lock it into place.U
6 you are still unsure whether the kegerator has been properly installed, we recommend that you contact a qualified installer. Note: Allow the kegerator to stand in an upright position for at least 8 hours before plugging in the unit. This is very important! Once the unit is laid on its side, the ...
Page 8 - regulator and the regulator to the beer tap.; Installing the Guardrail; Place the guardrail on top of the cabinet.; Installing the CO Regulator and; Follow these steps to safely install the CO
Also, See Illustrations E & F on pages 12 & 13, showing the hose connections to CO 2 regulator and the regulator to the beer tap. Installing the Guardrail Follow the steps below to install the guardrail. 1. Place the guardrail on top of the cabinet. 2. Align all support feet of the guardrail...
Page 9 - hazardous if handled improperly. They must be handled with care.; Tapping the Beer Keg – Installing Keg Tap (Single-Valve Type Barrel); Carefully tilt the keg and
DANGER! CO can be dangerous! CO cylinders contain high-pressured gas, which can be 2 2 hazardous if handled improperly. They must be handled with care. Tapping the Beer Keg – Installing Keg Tap (Single-Valve Type Barrel) Follow these steps below to tap the beer keg. Make sure the black pull handle o...
Page 10 - Operating Your Kegerator; Increase the pressure if the beer runs too slowly.; OPERATING YOUR KEGERATOR
Illustration ABlack Rubber Washer Installed in Wing Nut Illustration BThen Attach to CO2 Bottle Connector f i g .1 f i g .2 f i g .3 f i g .4 f i g .5 C o n n e c t t o t h eB e e r L i n e Tu b e B l a c k p u l l h a n d l e K e g C o u p l e r C o n n e c t t oC O 2 G a sL i n e Tu b e O C K W I ...
Page 11 - Cleaning & Maintenance
Note: It is normal to see condensation form on the faucet. It is caused by the difference of temperature between the cold beer and the inside of the faucet when beer is flowing through the line. Cleaning & Maintenance Flushing the tubesFollow the steps below to clean the keg tap and hoses. (See ...
Page 12 - Important Safety Message for Draft Beer Dispensing; passed
Important Safety Message for Draft Beer Dispensing Safety devices should be installed in the following places:A. On or directly downstream from the CO regulator.B. On the tapping deviceC. In-line in the pressure system Note: Locations A and B noted above are preferable. If possible, they should be b...
Page 14 - QUICK ASSEMBLY INSTRUCTIONS
I l l u s t r a t i o n F QUICK ASSEMBLY INSTRUCTIONS Installing Casters 1. Remove all items from inside cabinet.2. Lay kegerator on its side.3. Install four casters, making sure the two locking casters are up front4. Stand kegerator up on casters and allow Freon to settle for at least 8 hours befor...
Page 17 - inadequate fuses; LIMITED MANUFACTURER'S WARRANTY; operating conditions (extreme temperatures)
LIMITED MANUFACTURER'S WARRANTY This appliance is covered by a limited manufacturer's warranty. For one year from the original date of purchase, the manufacturer will repair or replace any parts of this appliance that prove to be defective in materials and workmanship, provided the appliance has bee...