NewAir ADW-2600W - Manual - manualsarea.com

Page 3 - SAFETY PRECAUTIONS

1. IMPORTANT SAFETY INFORMATION: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE WARNING! Follow the precautions below when using your dishwasher. GROUNDING INSTRUCTIONS • This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock ...

Page 4 - D i s h w a s h e r F e a t u r e s

2. OPERATING INSTRUCTIONS IMPORTANT: To ensure optimal performance, please read all operating instructions carefully before using this appliance for the first time. Control Panel 1. Rinse Aid Warning Indicator Light: Turns on when the rinse aid dispenser needs to be refilled. 2. Start/Reset Button: ...

Page 5 - BEFORE USING FOR THE FIRST TIME; Rinse Aid Function; located next to the cap. When the rinse aid

3. BEFORE USING FOR THE FIRST TIME A. Filling the Rinse Aid Dispenser Rinse Aid Dispenser Rinse aid is released during the final rinse to prevent water from forming droplets on your dishes, which can leave spots and streaks. Using rinse aid also improves drying by allowing water to sheet off dishes....

Page 9 - Basket Plate Racks; I N

• Dishes and cutlery should lie inside one another or cover each other. • Glasses should not touch, as this can cause damage. • Load large, difficult to clean items into the basket. • Knives with long blades should not be stored in an upright position. • Long and/or sharp items and cutlery should be...

Page 10 - The Cutlery Basket; Do not let any items extend through the bottom of the basket.; Do not nest them together.

The Cutlery Basket Cutlery should be placed in the cutlery basket with the handles at the bottom. If the rack has side baskets, spoons should be loaded individually into the appropriate slots. Especially long utensils should be placed in the horizontal position at the front of the upper basket as sh...

Page 11 - Starting a Wash Cycle; Wash Cycle Table; Indicates that you will need to fill rinse aid dispenser; Turning on the Appliance; Pull out the dishwasher basket.; Heavy Normal Light Speed Soak

5. Starting a Wash Cycle Wash Cycle Table Note: • Indicates that you will need to fill rinse aid dispenser • *AHAM DW-1-2005: This program is the test cycle; the recommended rinse aid dispenser setting is 6. Program Cycle Selection Information Description of Cycle Deterge nt Pre/Mai n Run Time (Minu...

Page 12 - See section; One program light is blinking

Changing Wash Cycles If the dishwasher has only been running for a short period of time, you can change the wash cycle. However, if the machine has run long enough that the detergent has already been released, it is also possible that the wash water has already been drained. In this case, you will n...

Page 14 - The entire filter assembly should be cleaned once a week.; Cleaning the Filter; up excess water in the sump.

Remember: • Inspect all filters before every cycle to ensure there are no food particles. • By unscrewing the coarse filter, the entire filter assembly can be removed. Always remove food remnants and clean the filters by placing them under running water. NOTE: The entire filter assembly should be cl...

Page 15 - INSTALLATION INSTRUCTIONS

Cleaning the Spray Arms You can easily remove the spray arms to for periodically cleaning the nozzles. This will prevent possible clogging. To remove a spray arm, simply grasp in the middle and pull upwards. Wash nozzles by placing under a stream of running water. Carefully replace them, making sure...

Page 17 - Faucet Adapter

WATER CONNECTION Back View Back of Dishwasher: 1. Drain port 2. Power Cord 3. Inlet port Your dishwasher comes equipped with a “quick connect” assembly that includes the inlet and drain hose. However, the faucet adapter must be installed on your faucet before you can connect the dishwasher. The adap...

Page 18 - To Disconnect your Dishwasher; Unplug the electrical cord from the outlet.; STARTING THE DISHWASHER

1. Screw the faucet adapter onto/into your faucet. Check to make sure there are no leaks. You can use Teflon tape to temporarily eliminate leaks if necessary. 2. Connect the six-sided connection of the drain hose to the drain port on the back of your dishwasher. Make sure not to damage the threads b...

Page 19 - TROUBLESHOOTING TIPS; Before Calling for Service

8. TROUBLESHOOTING TIPS Before Calling for Service Please refer to these troubleshooting tips for possible solutions to minor problems. If the problem persists, please contact an authorized service department or customer service. Problem Possible Causes What to Do A fuse may be blown or the circuit ...

Page 23 - DETAILED PARTS DIAGRAM